Latest charge regulator Tenders | Government charge regulator Tenders

Central Government/Public Sector

CTN :44844422

01 May, 2026 NA

Jhunjhunu - Rajasthan

Tender For supply of 643400051-carbon brush grade eg-12 65x50x20mm , 643400105-brush holder , 383900007-carbon brush for 250 kw arw/compressor motor with grade m145e as per drawing no 05-216, d , 383900013-carbon brush

Central Government/Public Sector

CTN :44836020

23 Apr, 2026 NA

Multi City - Rajasthan

Tender For auction sale of depot miscellaneous scrap - 98414501 scrap us electric items comprising of various types of battery charger, track feed charger, rru, invertor, elec. panels, pre-cooling cum battery charger, regulators, block instruments without relays, junction box, frequency regulators, repeater, transformer panels, wall mounted panel, and similar nature electrical items with attached non-ferrous of shorts and sizes with or w/out attachment of nonferrous/electric wire / ic if any. cond. (1) loading by purchaser (2) delivery in only rto registered vehicles note: - all purchasers are kindly requested to communicate through ireps only for matters related to power of attorney, delivery orders (do), delivery dates, and other relevant correspondence. offline requests shall not be entertained. requests (related to final delivery) shall be placed atleast seven days in advance so that there is sufficient time with competent authority for scheduling of scrap delivery.

Central Government/Public Sector

CTN :44815793

17 Apr, 2026 NA

Multi City - Tamil Nadu

Tender For corrigendum : auction sale of depot non ferrous scrap - cond & u/s stainless steel scraps such as pipes/ sheets, hot boxes, bins,flasks,stay bolts,trough sheets ,ss clip assembly,hitachi brush holder spring,flasks,distilled water plant,three seaters,lift front and back doors along with ferrous attachments,stainless steel geyser,stainless steel feeder junction box,hand rails, dust bins,stainless steel under frame box,distilled water plant,steel tiffin carrier container,dressing drums,ss rope,plates, cups,forks,food warmer,stainless steel bolts,hand rails, toilet base,tea cans,filters,canvasses,jars, trays,jugs,plates, stainless steel under slung water tank assembly, stainless steel annual repair tanks, ss water tank, junction box (lhb), defective fuse box (lhb), battery junction box, battery fuse box, switch plate assembly, rbc cubicle, canvas frame, cd motor base, rmpu frame, canvas frame small (560) and big (400), rmpu filter of sorts, and pneumatic cylinder,jugs,wall protectors, wash basins , clip assembly stainless steel,storage box,mixie jar, landing door ,vessels,owens,tumblers, strips, lavatory pan in lay,berth utility wire rods,ss bolts,bearings,filters of various types & sorts ,hot cas,sterlisers,leggings,liquid receiver,mortise lock 8 lever,kettle, under slung water tanks of various sorts& sizes,commode adapter, stainless steel vessels including tea cans,bio toilet ball valves with/ without available attachments and all other stainless steel scrap nature items including magnetic steel items, trough sheets with/without ferrous attachments,steel/stainless steel pipes/light fittings /filters with/without ferrous fittings /attachments/magnetic steel attachments /adherings, in full/part/broken and in loose parts. note: 1) removal of ferrous/glass/rubber /thread mesh/ wood and other attachments etc annual repaire not permitted. 2) cutting is not permitted 3) if any extraneous material/material of aluminium in nature found in the lot, the same should be handed over to the custodian at the time of delivery.

Central Government And Public Sector

CTN :44807276

13 Apr, 2026 NA

Raipur - Chhattisgarh

Tender For supply of brush holder assembly suitable for grid fan for roof mounted bkbl motor to emd part no. 5387140 make daulatram, emd or similar. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :44792073

20 Apr, 2026 NA

Vijayawada - Andhra Pradesh

Tender For steel split cotter pins size: 3.6 x 44 mm for brush holder of hitachi traction motor as per is: 549/1961 or latest. note: ten samples should be got approved before effecting bulk supply. ]

Central Government/Public Sector

CTN :44764098

22 Apr, 2026 NA

Erode - Tamil Nadu

Tender For supply of set of arcing studs for hitachi traction motor type hs 15250a consisting of 03 items as per drg. no. skel 4707 reference 3,4 & 5. (1) reference 3 arcing stud rocker ring side 1no/set. (2) reference 4 spring washer 1no/set. (3) reference 5 arcing stud brush holder side 1no/set. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44728499

08 Apr, 2026 NA

Bokaro - Jharkhand

Tender For brush holder assy,dwn:etb-brh-0002r1(3items) comprising of following: 1 - brush holder assy,dwn:etb-brh-0002r1 , 2 - brush holder assy f/motor,etb-brh-0034 , 3 - brush holder assly,dwn:e-brh-0329 ,

CTN :44748087

13 Apr, 2026 NA

Bokaro - Jharkhand

Tender For supply of o/h kit of brush holder assembly for traction motor hs15250a consisting of 08 items as following- (1) brush spring assembly complete in assembled condition to hitachi's drawing no.- 10s 778-713 (alt.-f) = 3 nos. (one assembly consists of item no.- 1, 2, 3 & 5 = 3 nos. each and item no.- 4 = 6 nos.). (2) adjusting pin to hitachi's drawing no.- 10t 806-970 (rev.-3) = 3 nos. (3) ptfe spacer to mod. sheet no.- elrs/ms/0329 (rev.-0) (ammendment-1) = 6 nos. (4) spring support to hitachi's drawingno. 10t 806-972 (rev.-c) = 1 no. (5) spring support to hitachi's drawing no. 10t 806-973 (rev. c) = 1 no. (6) arcing stud (bh side) to hitachi traction motor to rdso's drg. no. skel- 4707 (alt.-1) = 1 no. (7) special washer to hitachi's drawing no. 10t 806-977 (rev.-d) = 2 nos. (8) split pin l4 x50 (gi) = 3 nos. [ warranty period: 30 months after the date of delivery ]

CTN :44445050

03 Apr, 2026 NA

Meerut - Uttar Pradesh

Tender For expression of interest for procurement of spares of tatra 815 euro version engine - shaft sealing g 60x80x13/ retainer seal, outlet insulation, top rubber seal (valve), sink screw, screw m5x10, clutch booster, hex nut m8 is:1364 (part-iii) 8-1983/ nut plain hexgon, diode, screw, m s nut, sealing ring 30x36, is:3175- 74 al, lock washer, hex hd screw m8x22 is:1364 (part-ii) 8.81983/ screw wood, clamping strip 9x235 csn 02 2757, gasket (6264001), gasket 0.5mm, sealing ring 33x3.2, hex hd bolt m10x85 is:1364 (part-i) 8.8-1983, sealing ring 33x3.2, clip for accelerator rod spring, shaft sealing a/bswfld 40x52x7 fpm 8015, clutch carrier, gasket 0.25mm, hose 100mm, hose 13x300 csn 137821.1, oil supply tube, lh, repair kit set (turbo blower rh & lh), clamping strip 9x235, gasket (06825-43), intake hose, alternator clamp, hose clamp / clamp, front cover, shim for engagement clutch bush, washer, self lubricating bushing, insulation tube, brush (443930151937), hose 36/46 l=45mm, shaft sealing 45x68x12.5, lock washer, sealing ring, spring washer, gasket, plain washer, sealing ring 25x21, sealing ring 14x20, washer 7.6/20x1.5 mgn 19.05.60/01.221, water proof starter motor 5.8kw/24v, hex hd screw m6x12 is:1364 (part-ii) 8.8-1983/ screw machine (106 103 140 611), gasket 0.50 mm, gasket 0.25mm, neck 20 csn 13 7854.22, plug, gasket (6264001), gasket 3 mm, hex hd bolt m 8x28 is:1364 (part-ii) 8.81983, tube, gasket 0.5mm, discharge tube, tube, hex nut m8 is:1364 (part-iii) 8-1983, shaft sealing gpv 30x55x9, is csn 02 9401.0, shaft sealing gpv 30x55x12, is csn 02 9401.0, spacer washer 0.05mm, gasket 0.5mm, gasket 0.25mm, gasket 0.25mm, hose rptu 127150 27/37, 420mm, lever pin, gasket 0.25mm, parallel key 6h9x6x25 is:2048-1983, directing sheet, clip for accelerator rod spring, gasket 0.25mm, shaft sealing a/bswfld 40x52x7 fpm 8015, gasket 0.25mm, gasket 0.25mm, hex hd screw m12x55 is:1364 (part-i) 8.8-1983, hose 100mm, gasket 0.25mm, hose 13x300 csn 137821.1, repair kit set (turbo blower rh & lh), gasket (06825-43), sealing ring 55x5 csn 02 9281.2 / sealing non-metallic round section, sealing washer, lid, needle bush hk 3520, sealing washer, spacer washer, front cover, rear cover, insulation, holder, outlet screw, resistor, washer, washer, self lubricating bearing 443932000210, holder, insulation, hex hd grease nipple 16m10x1 / fifting lubrication, insulation tube, holder, brush (443930151937), outlet screw, washer, insulation, clamping strip 9x360, shaft sealing g 60x80x13 / retainer seal (101-521-017-317), gasket, hose 36/46 l=45mm, 1.5 electric teflon insulated wire, eyelet round shape no 10, male female eyelet, adopter of steering pump, plug for front housing, fastening plate, bushing, washer 1.5mm, sealing ring 14x20 is: 3175-74 cu, sealing ring 28x2, intake valve guide, distance washer injectors (thicness 0.10 mm), cam shaftbush (thick), cam shaftbush (thick), sealing ring 120x3, sealing ring 25x21, gasket, sealing ring 11x7, screw, gasket, pin (304 002 3200), discharge tube, oil supply tube, washer, lock sheet 32, lock ring 24 is:3075 (part-i)-1986, gudgeon pin (304 3006), hose clip, lock washer, cover, plug m18x1.5 ona 1913.05, ring, self lubricating bearing, slotted nut m32x1.5, spacer washer 1.0 mm, nut plain hexagonal, hex hd bolt m 12x90, spacer washer 0.3mm, spacer washer 2.0 mm, ball bearing (6306), ball bearing (6303), gasket 0.25 mm, sealing ring 36x44, is 3175-74 al, lock ring 20 csn 022925.1, spring washer 22 is:6735-72, sealing ring 24x30 is:3175-74 al / sealing ring metal, hose l=180mm, clip 9 csn 02 2753.5, gasket 0.25mm, stud c m8x25 is:1862 -1975- 8.8, stud c m8x30 is:1862 (part ii)-1975- 8.8, clamping strip 9x235 csn 02 2757, hose holder, hose holder, gasket 3 mm, hose 25/35 l=90mm, sealing ring 20x26 is:3175-74 cu, plug, hex hd bolt m10x85 is:1364 (part-i) 8.8-1983, spacer washer 0.10mm, sealing ring, sealing ring 08x12, is:3175-74 cu / sealing ring metal, spacer washer 0.10mm, intake valve line, ball bearing 6206a

Central Government/Public Sector

CTN :44399943

30 Mar, 2026 NA

Lucknow - Uttar Pradesh

Tender For supply of brush holder assembly complete without carbon brush for traction motor type hitachi hs-15250a as per clws drg. no. 2twd.095.090 alt-7 or latest.

Charge Regulator Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors