Latest check nut Tenders | Government check nut Tenders

Central Government/Public Sector

CTN :40509930

09 Jun, 2025 NA

Bhusawal - Maharashtra

Tender For supply of full threaded hd bolt dia. 25 mm, 1000 mm long with washer, nut & check nut, grade 8.8 (tr eatment hot deep galvanization) suitable for bridge mast [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :40510151

02 Jun, 2025 NA

Dibrugarh - Assam

Tender For supply of ms nuts and bolts hexagonal head 65 mm long x 16 mm dia full threaded along with one h exagonal nut of 14 mm thickness, one no check nut of 8 mm thickness , 2 nos flat washer, one no spring washer and one no split pin of 3.2 mm x 45 mm size to be fitted in a hole 3mm above the bottom of the b olt conforming to is:1363. [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :40478582

16 Jun, 2025 NA

Chennai - Tamil Nadu

Tender For tender for supply of broken screw and nail removal set and universal nail extraction set - hollow reamer , complete , anticlockwise cutting , for screws 3.5 and 4.0 mm , extraction bolt , for screws 3.5 and 4.0 mm , hollow reamer , complete , anticlockwise cutting , for screws 4.5 mm , extraction bolt , for screws 4.5 and 5.0 mm , extraction screw for screws 3.5 mm , extraction screw , conical , for screws 4.5 and 6.5 mm , t-handle with quick coupling , screwdriver shaft , hexagonal , small , 2.5 mm , screwdriver shaft , hexagonal , large , 3.5 mm , hss drill bit 3.5 mm for implant steel , sterile , hss drill bit 2.5 mm for implant steel , sterile , screwdriver shaft , stardrive , t8 , self-holding , forceps for screw removal , l 205mm , gouge , 10mm wide , l 205mm , hollow reamer for 5.0 / 6.0 / 6.5 / 7.0 mm screws , extraction bolt , for 5.0 / 6.0 / 6.5 / 7.0 mm screws , sharp hook , l 155mm , screw driver shaft stardrive t15 , 3.5 , screw driver shaft stardrive t25 , 3.5 , handie with quick coupling , extraction plier for screws , to grasp screws behind the screw head , screw driver hexagonal cannulated 4.5 , screw driver hexagonal cannulated 6.5 , connector with thread , for extraction hook , extraction hook , length 480 mm , for nails dia 9.0 mm , extraction hook , iong , for nails dia 9.0 mm to 11.0 mm , extraction hook , iong , for nails dia 11.0 mm to 14.0 mm , t- handle with quick coupling , box tray for instruments , including all conical / straight bolts , extraction rod , slot hammer etc.

Central Government / Public Sector

CTN :40511208

06 Jun, 2025 NA

Bhubaneswar - Odisha

Tender For supply of set of ss nut & bolt (16x65mm) full thread with split pin o1 no. spring washer 01 no. plain w asher 02 nos. and check nut 01 no. all nut bolts to is:1364pt-2 grade-ss 304, all plain washer is:2016 gra de-ss304, all spring washer to is:3063 flat sec grade-ss304, all check nut to is:7002-ss304,split pin is:54 9 ss304 bolt shall be of make: tvs/unbrako/ dfl/tuff/jom/xpo only. grade 8.8 or above only. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40507380

12 Jun, 2025 16.61 Lacs

Sonbhadra - Uttar Pradesh

Tender For supply of control unit assy. part no. se57110 , refilling kit for automatic fire part no. se57330 , sensor cable part no. se53695 , dcp cylinder 20kg partno. se57510 , cylinder clamp part no. se57491 , 1 by 2 inch hose assy part no. se535842 , 1 by 2 inch hose assy 800 mm part no. se5352212 , 1 by 2 inch hose assy 1000 mm part no. se5358418 , 1 by 2 inch hose- 2000 mm part no.se535849 , 1 by 2 inch hose assy. part no.se535846 , nitrogen cylinder assembly 0.5 lit part no. se57112 , 1 by 4 in hose assy, 7000mm part no. se5352266 , tee 3 by 4 inch bsp part no.se53757 , pipe cross-4 way part no.se535123 , elbow 1 by 2 in part no.se535021 , coupler 1 by 2 in part no.se53518 , 3 by 4 inch elbow with check nut part no. se53630 , 3 by 4 inch coupler part no.se53570 , portable cylinder part no. se53836 , nozzle conical part no.se53508 , dust cap part no. se53835 , horn unit. part no.se57392 , over ride unit part no. se54453 , main cable assembly part no. se57506 , 1 by 4 in hose assy, 700mm part no. se5352279 , pilot cylinder assembly gl part no.se57146 , cable assly main part no. se57253 bid number/ & ( * ) : gem/2025/b/6283059 dated/ + : 28-05-2025 bid document/ 2 2 1 / 26

CTN :40510440

05 Jun, 2025 NA

Kharagpur - West Bengal

Tender For supply of set of flower washer, key, circlip and check nut for mvmt as per drg. no. elkp/sk-39 rev-0. each set consist of the following: (i) flower washer (item no. 1) = 20 nos., (ii) key (item no. 2) = 05 nos., (i ii) circlip (item no. 3) = 20 nos., (iv) check nut for mvmt (item no. 4) = 10 nos. [ warranty period: 30 m onths after the date of delivery ]

CTN :40492366

10 Jun, 2025 NA

Jammu - Jammu And Kashmir

Tender For supply of reel spring , air filter , feeder slats , c 130 , flat , uc 205 patti , uc 206 patti , third arm bolt , prong nut bush , pullet pin , goda check nut hex , spacer 25 mm , spacer 30 mm , feeder lock gdr , feeder half lock gdr , lock 12a1 , half lock 12a1 , shim 6309 , dust cover 6309 , front feeder shaft 35 mm , motor tikki , idler bush 5 no , head bush , grease pipe , grease pipe , motor glass , cutter motor t , uc 206 , 6206 , 6211 , pulley pin bush collar , reel bush c class , reel bush , c 45 , c 131 , c 85 , c 44 , c 105 , cutter bar jack , prong killi , c 91 , c 132 , c 116 , c 81 , c 46 , battery terminal , choke cable kartar , fork bolt ptl , circlip 47 mt , cotter , bolts nut mix , plain washer , hex blade , sprit pin , v belt c 107 , v belt c 106 , v belt c 131 , bearing 6312 , seal , lock , shovel bolt 22 no rotavator , shovel rotavator falla , cross rotavator , frame bolt 19 no tiller , shovel bolt big tiller , tiller shovel , front axle bolt , spring spacer patti , tiller spring , u-big tiller bid number/ & ( * ) : gem/2025/b/6270961 dated/ + : 26-05-2025 bid document/ 2 2 1 / 58

CTN :40187538

28 May, 2025 NA

Tawang - Arunachal Pradesh

Tender For bid to ras tender for supply of cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112-1989 make-birla gold , ambuja , ultratech , acc , jk or dalmiya under job no 2502 mmg bkr as per store list , stone boulder 9 inch to 12 inch , coarse aggregate 40-63 mm graded , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , water proofing compound confirming to is 2645-2003 make-pidilite , dr fixit , fevicol , pbs roll 20m long , width of 0.9 mtr isi marked with min weight of 34 kgs oblique roll , cement based paint snowcem make-berger , asian , nerolac , synthetic paint enamelled og confirming to is 5-2004 make-berger , asian , nerolac , synthetic paint enamelled brown confirming to is 5-2004 make-berger , asian , nerolac , anti corrosive red oxide zinc chromate primer confirming to is 5-2004 make-berger , asian , nerolac , loop holes 1000 x 300 mm make-tata , sail , jsw , ventilator steel 300 x450 mm wiil be fabricated using isa 35x35x5mm for outer frame and isa 30x30x3mm for shutter frame with blace sheet make-tata , sail , jsw as per store list att , ms binding wire tata , sail , jsw , ismb hot rolled ms 125 , 4000mm long make-tata , sail , jsw , ismb hot rolled ms 125 , 1200mm long make-tata , sail , jsw , srt 1840 x 613 x 180 , 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make-tata , sail , jsw , prefab mild steel door of size 900x1700 , outer frame made out of isa 40x40x6mm and door shutter frmae of isa 35x35x5mm and all stiffner isa 30x30x3mm. steel shall conform to is-800 make-tata , sail , jsw , hdpe sand bag og colour of size 34 inch x 14 inch , mild steel bars of size 6 to 8mm dia conforming to is 432 part i 1982 make-tata , sail , jsw , preferb folding double sleeping sleeping bunks made of ms columns 65x65x6 mm and ms plate from made of isa 40x40x6mm , hold fast make-tata , sail , jsw as per store list attached , wooden planks for shuttering iind class wood of size 3.0 x 0.30 x 0.026m , wooden scantling various sizes , nails various size , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings , drilled with 2 nos holes for 6 mm dia near one side , air termination single pointed aluminium rod 12 mm dia and 300 mm long , gi pipe 40 mm dia light grade make-jindal , tata , kalinga , gi pipe 20 mm dia light grade make-jindal , tata , kalinga , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt make-presto , polycab , finolex , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 nos 8 mm dia 25 mm long hexagonal head screw , aluminium strips 25 x 3.0 mm , nut and bolts 6 mm dia 30mm long with check nut and washer , charcoal , salt normal , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm , 3 mm thick with ms frame , funnel fitted with 20 mm diameter gi pipe 1.5 m long pipe make-jindal , tata , kalinga , galvanized iron strip 32 x 6 mm

Central Government And Public Sector

CTN :40473555

06 Jun, 2025 NA

Sonitpur - Assam

Tender For supply of check nut for bp & fp cut off angle cock drg. no-mw/m-03-11,item no-02. [ warranty peri od: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40290601

29 May, 2025 67.15 Lacs

Raigarh - Chhattisgarh

Tender For corrigendum : procurement of pump spares - shaft sleeve,moc-ss410,part no2100scp200550ha,model-scp200-550ha , shaft with key,moc-ss410,part no-1800scp200550ha,modelscp200-550ha , neck ring,moc-ltb5,part no1181scp200550ha,model- scp 200-550ha , gland,mocci,part no-2310scp200550ha,model-scp200-550ha , stuffing box bush,moc-ci,part no2402scp200550ha,model-scp200-550ha , sleeve nut rh-lh,moc-ss410,part no-6032scp200550ha,modelscp200-550ha , logging ring,moc-gfn,part no2300scp200550ha,model-scp200-550ha , rotating unit complete,moc-cat-b,part no-68gmerot01,model-6- 8gme , interstage ring,moc-ci,part no-1750,model-6- 8gme , suction sleeve nde with check nut,moc-lg2,part no-2103,model-6-8gme , delivery sleeve with de with check nut,moc-lg-2,part no-2102,model- 6- 8gme , neck ring,moc-bb,part no-1181,model-6-8gme , interstage bush intermediate bush,moc-ci,part no1090,model- 6-8gme , sleeve nut lh,moc-ss410,part no-3031,model-6-8gme , sleeve nut rh,mocss410,part no-3032,model-6-8gme , interstage collar,moc-ci,part no-1100,model-6-8gme , rotating unit complete,moc-ss316cf8m,part no1000cf8m,model- 150-200gsn , bearing housing de,moc-ci,part no-2761,model-150-200gsn , bearing housing nde,moc-ci,part no-2764,model-150-200gsn , logging ring, moc-gfn, part no-2300, model- 150- 200gsn , sleeve nut rh,moc-ss410,part no3032,model-150-200gsn , sleeve nut lh, moc-ss410, part no-3031, model- 150-200gsn , bearing end cover nde,moc-ci,part no-2756,model-150-200gsn , bearing end cover de,moc-ci,part no-2753,model-150-200gsn , neck ring,moc-ca15,part no-1181ca15,model-150- 200gsn , suction sleeve,moc-ss410,part no2103,model-150-200gsn , delivery sleeve,mocss410,part no-2102,model-150-200gsn , inter stage ring,moc-cf8,part no-1750cf8mmp150200,model-150- 200gsn , inter stage bush,moc-ci,part no1090,model-150-200gsn , upper and lower half casing,moc-wcb,part no-680gme1002,model-6-80gme , neck ring,moc-gr1,part no-680gme1181,model-6- 80gme , sleeve nut rh,moc-gr1,part no680gme3032,model-6-80gme , sleeve nut lh,mocgr1,part no-680gme3031,model-6-80gme , stuffing box bush,moc-ci,part no-680gme2402,model-6-80gme , logging ring-latern ring,moc-gr1,part no680gme2300,model-6-80gme , shaft sleeve suction side,moc-gr1,part no-680gme2103,model-6-80gme , shaft sleeve delivery side,moc-gr1,part no680gme2102,model-6-80gme , shaft with key,moc-en8,part no-680gme1800,model-6-80gme , interstage ring,moc-ci,part no-680gme1750,model-6-80gme , interstage collar,moc-ci,part no680gme1100,model-6-80gme , interstage bush,mocci,part no-680gme1090,model-6-80gme , rotating unit complete set,moc-cat-b,part no68gmerot01,model-6-8gme , sleeve nut de-nde,mocss410,part no-3031-3032,model-10-12eme , logging ring,moc-ci,part no-2300,model-6-8gme , impeller,moc-ca6nm,part no-15001012eme,model-6- 8gme , neck ring,moc-aus205,part no-1181,model-6- 8gme , casing top-bottom set,moc-ci,part no cas1012eme,model- 6-8 gme

Check Nut Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

corporations/Associations/Others

Central Government / Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector