Latest chemical coating Tenders | Government chemical coating Tenders

CTN :45711280

01 Jul, 2026 NA

Mumbai - Maharashtra

Tender For minor repairs and chemical coating to external walls of various bldgs. at hillside area.

State Government

CTN :45654985

26 Jun, 2026 NA

Khaperkheda - Maharashtra

Tender For work of coating of condenser tube end plates by brush able ceramic coating and water box by anti-corrosive chemical coating along with supply in unit 1 during coh at khaperkheda tps.

corporations/Associations/Others

CTN :45661795

03 Jul, 2026 NA

Kolkata - West Bengal

Tender For urgent rewinding and heat varnishing of 60hp/415v slip ring induction motor of pump unit-1 and other allied works at belgachia dps under mdps.

State Government

CTN :45496730

17 Jun, 2026 NA

Khaperkheda - Maharashtra

Tender For work of coating of condenser tube end plates by brush able ceramic coating and water box by anti-corrosive chemical coating along with supply in unit 1 during coh at khaperkheda tps.

corporations/Associations/Others

CTN :45384823

10 Jun, 2026 2.83 Lacs

Kolkata - West Bengal

Tender For rewinding, overhauling, heat varnishing along with replacement of damaged power cables of 03 nos. chlorine booster motors, 04 nos. flocculator motors and 02 nos. floor dewatering motors at wtp-i under grww.

State Government

CTN :45275642

02 Jun, 2026 3.07 Lacs

Serampore - West Bengal

Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging

corporations/Associations/Others

CTN :45275625

03 Jun, 2026 3.70 Lacs

Kolkata - West Bengal

Tender For repairing, overhauling and heat varnishing of stator and rotor with necessary testing and commissioning of 580 bhp h.t. motor unit no. 2 at mullick ghat pumping station

CTN :45119017

29 May, 2026 NA

Mathura - Uttar Pradesh

Tender For supply of latest is and description , supply and install non return valve nrv of ci of size 50 mm as per latest is and description , supply and fixing stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle, of dia 20 mm as per latest is and description , supply and fixing stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle, of dia 15 mm as per latest is and description , supply and fixing mild steel pot strainer of 100 mm bore as per latest is and description , supply and fixing new mild steel ystrainer of 80 mm bore as per latest is and description , supply and fixing new mild steel ystrainer of 65 mm bore as per latest is and description , supply and fixing new mild steel ystrainer of 50 mm bore as per latest is and description , supply and install pressure gauge in the pipe lines suitable for dia 15 mm pipe as per latest is and description , supply and install thermometers in the pipe line suitable for dia 15 mm as per latest is and description , gi pipe medium grade of 50 mm dia , gi pipe medium grade of 20 mm dia , gi pipe medium grade of 15 mm dia , supply assembly and erection of pgi sheet with tdf flange of thickness 22 gauge sheet as per description , m and l for duct insulation with 25 mm thick all as per description , m and l for wraping glass cloth incl uv chemical coating over nitrile rubber. thickness of glass cloth shall be provided as per oem recommendation , m and l for supply air grilis with extruder aluminium powder coated and size and type of air grills alongwith air volume shall be provided as per oem recommendation , m and l for return air grills with extruder aluminium powder coated without air volume control shall be provided as per oem recommendation , dismantling old false ceiling any type as per description , supply and install 3 way valve of ci of size 80 mm dia , demolition of brick work or floor as per description , m and l for brick work with sub class b brick straight or curved as per description , m and l for plastering 12 mm thick on fair faces of brick as per description , m and l 150 mm thick cement concrete 1 ratio 2 ratio 4 type b2 40 mm graded broken stone aggregate as per description , supply laying testing xlpe cable insulated heavy duty 1100 volts aluminium conductor of size 150 sq mm 3 and half core as specified and directed , m and l for 100 mm bore steel tubing light grade complete all as specified and as directed , supply laying testing xlpe cable insulated heavy duty 1100 volts aluminium conductor of size 95 sq mm 3 and half core as specified and directed , m and l for xlpe insulated armoured ug cables 3 point 5 core x 50 sqmm 1100 volts grade aluminium conductor including termination complete as specified and directed , m and l for xlpe insulated armoured ug cables 3 point 5 core x 35 sqmm 1100 volts grade aluminium conductor including termination complete as specified and directed , m and l for xlpe insulated armoured ug cables 4 core x 16 sqmm 1100 volts grade aluminium conductor including termination complete as specified and directed , m and l for earthing complete with gi earth plate electrode 600 x 600 x 6 mm thick burried directly in ground with 32 x 6 mm gi strip , sitc of lt control panel board cubical type indoor type floor mounted weather proof fabricated out of 2 point 0 mm crca sheet ae per drawing.