Latest chemical grouting Tenders | Government chemical grouting Tenders

CTN :40151142

14 May, 2025 NA

Multi City - Multi State

Tender For supply of stand for brazing of condensor coil/evaporator coil of hvacs. material: mild steel paint : blue, powder coating load carrying capacity: 150 kgs size: as per sample ]

Central Government/Public Sector

CTN :40152041

09 May, 2025 NA

Pune - Maharashtra

Tender For supply of wooden platforms (size : 3ft x 4ft , height : 9inch), ms pipe of 1.5 x 1.5 ft with 1 inch pipe su pport , 12mm water proof plywood, powder coating black, ruber bush. [ warranty period: 30 months afte r the date of delivery ]

Central Government/Public Sector

CTN :40152095

13 May, 2025 NA

Pune - Maharashtra

Tender For supply and fitment of tool box for electric locos having dimension 40cmx20cmx45cm of 1.5 mm m.s sheet as per is 2062 and powder coating with grey colour for loco pilots and lock operated by bl key in electric loco as per drawing no. wcr/tkd/el4-gen-104 with bracket for fitment in loco. note-desig n and fitment sample to be finalized from sse m/w pune shed before bulk supply [ warranty period: 30 months after the date of delivery ]

CTN :40152122

28 May, 2025 NA

Kharagpur - West Bengal

Tender For supply of flying insect killer as per rcf spec. no.: edts 155(rev. a) or latest for hot bu ffet coaches. (230v ac, 50 hz, of maximum dimension, l = 640mm, h=420mm, b= 250mm, ms sh eet with powder coating, with on/off switch & fuse holder, with 2x 18/ 20w argon filled tube light, for wall mounting). [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39950504

07 May, 2025 NA

Chennai - Tamil Nadu

Tender For supply of one coach set of aluminium extrusions and mouldings for lwscn-p p2 amrit bharat coaches, consists of : 1. extrusion to drg no.755-4-2-002,alt-c, item no. 1 1, lenght-1700 mm - 46 nos. 2. extrusion to drg no.755-4-2-002,alt-c, item no. 10, lenght-17 80 mm - 23 nos. 3. moulding to drg.no.755-4-3-002, alt-a, item no. 13, a)length-1850mm -20 n os , b)length-2110mm -10 nos , c)lenghth- 600mm -10 nos. 4. moulding to drg.no.755-4-3-00 2, alt-a, item no. 17, length-1850 mm - 20 nos. 5. extrusion to drg.no.aaa-4-4-586, alt-nil, le ngth-2000 mm - 60 nos. 6. flat moulding to drg.no.icf/std-4-3-008, alt-s, item -1, length-200 0 mm without holes-20 nos. 7. aluminium extrusion to drg.no.aaa-4-4-550, alt-nil,length 2 000mm (h)-60 nos. 8. aluminium extrusion to drg.no. icf/mrvc/c/bt-4-2-010, alt-nil, item-2, l ength- 2000 mm (p)-34 nos. 9. cover and ectrusion to drg no. 755-4-4-001,col-1, alt-g, item no.34 to 36. 10. extrusion to drg.no.dmu/tc/ss(529)-4-2-009,item no.1,length -2000 mm- 5 n os. 11. flat moulding to drg. no. 975-4-3-003,alt-a,item no. 5 - 4 nos. 12. aluminium extrude d angle moulding to drg.no.cc43353,anx-2,alt-a, length- 2000 mm -6 nos. 13. covering for emergency brake pull box to drg no. 581-3-5-035, alt-c-10 nos. 14. pelmet to drg.no 755-4- 4-002,alt-a, item no.9 - 2 nos. powder coating color shade to be in ral 0909005. necessary protective films to be provided in all visible surface of the item. [ warranty period: 30 mo nths after the date of delivery ]

CTN :40141352

17 May, 2025 NA

East Sikkim - Sikkim

Tender For supply of road furniture - solar delinator solar edge indicator size 1200 mmas per irc 67 2022 technical details of solar guide posts made of mild steel of 75 76 od and 1.5mm thickness with pure polyester powder coating with the minimum thickness of powder coating of not less than 60 micron for protection against corrosion. the surface should be concealed so that there should not be any exposed surface without powder coating. the posts should have a circular design with the height of 900 mm above the ground and 300mm base underground total 1200mm.the guide post shall have 8 red leds on equalivant gap total 48leds for brighter viewing of the motorists in fog. the leds shall start blinking as it gets dim. the solar delineator shall have solar panel on top of the surface for recharging. further it should have 2 strips of 150mm each of type xi sheeting specifications as per irc 67 and astm d 4956 which would ensure to obtain clear visibility of the road alignment during night time also. , delinators size 1200mm as per irc 67 2022 roadway indicators as guide poles guide posts made of mild steel with pure polyester powder coating with the minimum thickness of powder coating of not less than 40 micron for protection against corrosion the surface should be concealed so that there should not be any exposed surface without powder coating the posts shall have an ellipsoidal design with the height of the pole shall be 900 mm above the ground with about 300mm base which can be anchored onto the ground as per irc 79 2019 mild steel guide poles shall conform to type 11 reflective sheeting specifications as per irc 67 2022 and astm d 4956 which would ensure to obtain clear visibility of the road alignment during night time to achieve enhanced visibility of the curved portion of the road guide poles shall have substantial area allocated to exihibit alternate band of black paint and white retroreflective sheeting the above arrangement shall be in place in both sides of the poles in the case of undivided carriageways having sharp curves as per fig 1 of irc 79 2019 , delinators size 900 1000 mm as per irc 67 2022 roadway indicators as guide poles. guide posts made of mild steel with pure polyester powder coating with the minimum thickness of powder coating of not less than 40 micron for protection against corrosion. the surface should be concealed so that there should not be any exposed surface without powder coating. the posts shall have an ellipsoidal design with the height of the pole shall be 800 mm above the ground with about 200mm base which can be anchored onto the ground as per irc 79 2019. mild steel guide poles shall conform to type 11 reflective sheeting specifications as per irc 67 2022 and astm d 4956 which would ensure to obtain clear visibility of the road alignment during night time. to achieve enhanced visibility of the curved portion of the road guide poles shall have substantial area allocated to exihibit alternate band of black paint and white retroreflective sheeting. the above arrangement shall be in place in both sides of the poles in the case of undivided carriageways having sharp curves. as per fig 1 of irc 79 2019 , retroreflective tape 2 inch red 45 mtrs per roll , retroreflective tape 2inch yellow 45 mtrs per roll , retroreflective tape 2inch green 45 mtrs per roll , retroreflective tape 2 inch white 45 mtrs per roll , convex mirror size 40 inch or higher mirror thickness 05 mm or higher with mild steel pipe fittings length 98 inch dia 5 inch post suitable for convex morror mounting. , speed limit 40 kmph caution sign board of size 600 mm as per irc 67 2022 , speed limit 30 kmph caution sign board of size 600 mm as per irc 67 2022 , u turn prohibited caution sign board of size 600 mm as per irc 67 2022 , give way caution sign board of size 600 mm as per irc 67 2022 , stop caution sign board of size 600 mm as per irc 67 2022 , falling rocks caution sign board of size 600 mm as per irc 67 2022 , overtaking prohibited cau

CTN :40014029

02 May, 2025 NA

Chennai - Tamil Nadu

Tender For corrigendum : 117 procurement powder coating equipments and installation at tansi units

CTN :40130273

09 May, 2025 NA

Dewas - Madhya Pradesh

Tender For providing and fixing open jim upkaran at pathankunwa (near pani ki tanki) in ward no.36 dewas - items :, double chest press product area :-1372mm x762mm x 2134mm safe playarea:- 1828mm x 1220mm double chest presser equipmentmade up of 4inch b class gi pipe;prime stand duly bend, foundationcenter pipe. the handle frame is made of 42mmod g.i. pipe. the remaining frame is made of32mm od g.i. pipe. seating frame support of dimension250 x 150 x 5mm iswelded for supporting the pedal seat. ms seat of size 380mm x 300mm x5mm is used forsupporting the foot. 60mm seamless pipe bushes. permanent lubricated ball bearings6205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high quality rubber grip are also usedfor firm handling. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tightenthe closing cap. closing cap of hdpe / ppcp plastic isused. the powder coating done with purepolyester powderwith 60 to 70 micron thickness., leg press double - product area :-1676mm x610mm x 1524mm safe playarea:- 2286mm x 1220mm leg press equipment made up of4inch b class gipipe; prime stand duly bend,9506 13800038000foundation center pipe. the remaining frame is made of42mm od g.i. pipe. ms seat of size 380mm x 300mm x5mm is used. 60mm seamless pipe bushes. permanent lubricated ball bearings6205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high quality rubber grip are also usedfor firm handling. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tightenthe closing cap. closing cap of hdpe / ppcp plastic isused. the powder coating done with purepolyester powderwith 60 to 70 micron thickness., shoulder press / double chest cum -product area :-1372mm x762mm x 2134mm safe playarea:- 1828mm x 1220mm double chest presser equipmentmade up of 4inch b class gi pipe;prime stand duly bend, foundationcenter pipe. the handle frame is made of 42mmod g.i. pipe. the remaining frame is made of32mm od g.i. pipe. seating frame support of dimension250 x 150 x 5mm iswelded for supporting the pedal seat. ms seat of size 380mm x 300mm x5mm is used forsupporting the foot. 60mm seamless pipe bushes. permanent lubricated ball bearings9506 14500045`0006205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high quality rubber grip are also usedfor firm handling. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tightenthe closing cap. closing cap of hdpe / ppcp plastic isused. the powder coating done with purepolyester powderwith 60 to 70 micron thickness.seating puller, sky walker / straight trainer/crosstrainer -product area :-l x w x h1778mm x 610mm x 1828mmsafe play area:- 2134mm x 915mm straight trainer/sky walkerequipment made up of 4inch b class gi pipe; prime stand dulybend, foundation center pipe. the pedal frame is made of 3" x 1"rectangular g.i.pipe. the handle frame is made of 32mmod g.i. pipe. footrest frame support of dimension250 x 100 x 2mmis welded for supporting the aluminiumfootrest. aluminium footrest of size 300mm x150mm x 5mm isused for supporting the foot. 60mm seamless pipe bushes. permanent lubricated ball bearings6205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tighten9506 14000040000the closing cap. closing cap of hdpe / ppcp plastic isused. high quality rubber grip are also usedfor firm handling., double air walker - product area :-2130mm x785mm x 1390mm safe playarea:- 2590mm x 1024mm double air walker equipmentmade up of 4in

CTN :40140993

17 May, 2025 23.01 Lacs

Jalgaon - Maharashtra

Tender For providing of custom bid for services - powder coating complete services for h2a as per annexure a

CTN :40119819

05 May, 2025 72.90 Lacs

Jalgaon - Maharashtra

Tender For providing of custom bid for services - services of press work, fabrication, welding, phosphating, painting, powder coating and rubber, foam pasting for manufacturing of steel crate for bmcs 4 into 4 as per ofbh drg no ofbh sk 1759 at o f bhusawal

Chemical Grouting Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector