Latest chemical test kit Tenders | Government chemical test kit Tenders

Central Government/Public Sector

CTN :45405115

12 Jun, 2026 NA

Vadodara - Gujarat

Tender For supply of b-check kit for cpcb-iv compliant engine of make : cummins model no. qsm15-g1 fitted in lhb power car, consisting of these 10 items , 1) filter ,fuel part no - ax1017055 -01nos. 2) foil,sealed test strips cc2602b (3-way strip) part no. 3403800- 01.no. 3) lube oil filter , part no. ax1017056-01 no. 4) cartridge fuel filter, part no-5627726-01 no. 5) def dosing unit filter, part no, a059z389-01 no. (6) inhibitor corrosion 10 liter cap - part no, 4926654 -01. no. (7) belt ,v ribbed (water pump drive), part no , 5663603- 01. nos (8) lube oil ck4-15w40 10 ltr,part no.l-508305- 01 nos. (9) lube oil ck4-15w40 26 ltr,part no.l-508305 - 02 nos. (10) def intake filter, part no, a035d361- 01 nos. [ warranty period: 30 months after the date of delivery ] ]

CTN :45397928

11 Jun, 2026 5.61 Lacs

Sirohi - Rajasthan

Tender For supply of stainless steel (304)grade milk can with lid, capacity 20 liter, mirror finishing, corrosion resistant, bottom material 304 grade ss, bent &reverted handle, pull and push lid, with test report from central govt/ nabl/ilac accredited lab to prove conformity to specification

State Government

CTN :45369954

19 Jun, 2026 NA

Koradi - Maharashtra

Tender For work of inspection of water wall tubes & corrosion mapping by remote field electromagnetic test (rfet) during overhaul of u#10 at 3x660 mw at ktps, koradi.

Central Government/Public Sector

CTN :45368871

13 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of atf silver strip corrosion test items for neelam platforms chemistry lab of nh asset- silver corrosion test bath , test tube , silver strip , polishing vice or holder , thermometer , cold finger condenser , glass cradle , forceps , colour standard for silver strip corrosion test , polishing material: , a) silicon carbide grit paper of 53µm grade (240 gra (240 grade) , b) silicon carbide powder or grains having normal of 105µm (120 - 150 grit or p150 fepa grade) , c) pharmaceutical grade absorbent cotton wool , d) isooctane (99.75 percent purity)

CTN :45363424

15 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of euipments for civil lab - civil engineering, auger boring engine type: 4-stroke, air-cooled, single-cylinder petrol engine displacement: 196 cc power output: minimum 6.5 7 hp ( 3.5 kw) maximum engine speed: ~3600 4000 rpm starting system: recoil (manual) start fuel type: pure petrol fuel tank capacity: minimum 1.5 1.6 l supported auger bit sizes: 4 , 6 , 8 , 10 , 12 , 14 (100 350 mm) bit material: heavy-duty mild steel with powder coating typical drilling depth: minimum 3.5 4 ft per bit (800 mm 1.2 m) bit coupling: quick-coupling system for easy bit replacements frame: robust tubular steel frame with ergonomic handles and vibration absorbers weight: minimum 20 22 kg (without auger bit), weighing balance 200 kg capacity with 50g accuracy capacity: 100 kg type: digital weighing balance least count / accuracy: 10 g or better display: led/lcd digital display power supply: ac mains with inbuilt rechargeable battery backup platform: stainless steel, sturdy construction functions: tare, zero tracking, overload indication operating time (battery): minimum 8 12 hours standards: legal metrology approved (preferred), weighing balance 50kg capacity with 10g accuracy capacity: 100 kg type: digital weighing balance least count / accuracy: 10 g or better display: led/lcd digital display power supply: ac mains with inbuilt rechargeable battery backup platform: stainless steel, sturdy construction functions: tare, zero tracking, overload indication operating time (battery): minimum 8 12 hours standards: legal metrology approved (preferred), complete set of seive for fine aggregate 200 dia type: is standard test sieves for fine aggregate material: brass frame with brass woven wire mesh diameter: 200 mm height: as per is specification aperture sizes (complete set):4.75 mm, 2.36 mm, 1.18 mm, 600 m, 300 m, 150 m, pan & lid standards: is 2386 (part i) / is 460 finish: smooth, corrosion-resistant accessories: lid and bottom pan included, complete set of seive for course aggregate 200 dia brass; 200 mm dia; complete set (80 4.75 mm); lid & pan., flow table apparatus with all accessories(hand operateddimensions and specifications as per is 9103, table top made from flat metal plate, minimum thickness 1.5 mm. table top size: 700 mm 700 mm, with flatness tolerance of 1.5 mm. table top marked with: scribed cross at centre, lines parallel to table edges and central circle of 200 mm diameter underside of table top reinforced to prevent distortion. total mass of table top: 16 1 kg. table top, base frame front and upper stops provided as per is 9103. lower front edge fitted with two rigid stops to transfer load directly to base frame. base frame designed to transfer impact load directly to supporting surface, minimizing bounce. stop watch digital - 2 nos scale 1 mtr 2 nos mounting wooden platform 300 mm height amc for 3 years inclusive.

CTN :45148480

04 Jun, 2026 NA

Jalandhar - Punjab

Tender For corrigendum : supply of element lube oil filter , inhibitor corrosion 5 ltr packing , element air cleaner , test strip , valovoline preiumum blue 7800 plus 1 by 20 , kit fuel filter and ring , kit super byp filter element

CTN :45343668

11 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For purchase of equipments for materials testing lab for civil department - spring testing machineload & displacement sensing load cell capacity: 0 10 kn accuracy: 1% fs (better if 0.5%fs) displacement sensor lvdt / digital encoder accuracy: 0.5 mmmachine design frame: rigid steel frame with crosshead movement type: mechanical screw with hand wheel (simple & robust) or electromechanical actuator (for smoother, controlled motion) crosshead travel: ~150 200 mm safety guards: transparent shields around moving partsfixtures & accessoriesspring testing compression plates (ground & parallel) tension hooks / eyelets for extension springs set of spacers / adapters for small springs tensile testing standard tensile grips wedge or screw type calibration certificate for load cell standards complianceensure compliance with basic material test standards such as: astm e4 / iso 7500-1 calibration of force measurement astm e8 / iso 6892 tensile performance & accuracy load accuracy: 1% fs displacement accuracy: 0.5% repeatability: 0.5%, rockwell cum brinell hardness testing machine min initial test force :10kgf, total test force range : 60kgf,100kgf,150 kgf, max. height of specimen :215 mmmin distance from indenter center tomachine wall :132 mm accessories : steel ballpreferred indentor 1/16" preferred steel ball: 1/16"and with all standard accessories to run the machine, direct shear machinestandard compliance:the equipment shall confirm to bureau of indian standards is 2720 (part 13) and equivalent astm international astm d3080.technical specifications:shear box size: 60 mm 60 mm 25 mm specimen size (complete with grid plates, porous stones, and specimen cutter).normal load capacity:minimum 5 kn with loading yoke and calibrated loading hanger set.shear load capacity:minimum 2.5 kn or 5 kn with calibrated proving ring (with calibration certificate).rate of strain (shear displacement):variable speed drive with controlled displacement ranging from 0.01 mm/min to 1.25 mm/min (motorised model preferred for uniform rate control).displacement measurement:horizontal displacement dial gauge: 0.01 mm least countvertical displacement dial gauge: 0.002 mm or 0.01 mm least countloading frame:rigid, heavy-duty loading frame with corrosion-resistant finish.drive system:motorised with single phase 220 230 v, 50 hz power supply.accessories (to be supplied complete):shear box assembly, proving ring with calibration chart, two dial gaugesloading weights and hanger, porous stones (2 nos.), specimen cutter, tool kit, flow table test apparatusdimensions and specifications as per is 9103, table top made from flat metal plate, minimm thickness 1.5 mm. table top size: 700 mm 700 mm, with flatness tolerance of 1.5 mm. table top marked with: scribed cross at centre, lines parallel to table edges and central circle of 200 mm diameter underside of table top reinforced to prevent distortion. total mass of table top: 16 1 kg. table top, base frame front and upper stops provided as per is 9103. lower front edge fitted with two rigid stops to transfer load directly to base frame. base frame designed to transfer impact load directly to supporting surface, minimizing bounce. stop watch digital - 2 nos scale 1 mtr 2 nos mounting wooden platform 300 mm height amc for 3 years inclusive.

Central Government / Public Sector

CTN :45213495

08 Jun, 2026 NA

Mathura - Uttar Pradesh

Tender For corrigendum : tender for supply of glassware -atf amber coloured sample bottle-1000 ml , atf amber coloured sample bottles-500 ml , beaker-25 ml. , beaker-50 ml. , beaker-100 ml. , beaker-250 ml. , beaker-500 ml. , beaker-1000 ml. , beaker-2000 ml. , bod bottle - 300 ml , burette - 2 ml , burette - 5 ml , burette - 10 ml , amber burette - 25 ml , burette - 50 ml , burette - 100 ml , auto burette - 10 ml , auto burette - 25 ml , auto burette - 50 ml , conical flask- 50 ml , conical flask- 100 ml. , conical flask- 150 ml. , conical flask- 250 ml. , conical flask- 500 ml , conical flask with stopper- 100 ml , conical flask with stopper- 250 ml , conical flask with stopper- 500 ml , crow receiver measuring cylinder - 100 m , crystallizing dishes-2.5l , silica crucible-150ml without lid , drying tray2.5l , desiccator -300mm , desiccator -200mm , desiccator - 5l , distillation flask (auto) , distillation flask (manual) , dropping indicator bottle-125ml , glass funnel - 100 mm , measuring cylinder - 10 ml , measuring cylinder - 25 ml , measuring cylinder - 50 ml , measuring cylinder - 100 ml , measuring cylinder - 250 ml , measuring cylinder - 500 ml , measuring cylinder - 1000 ml , nessler tube - 50 ml , graduated pipette - 1 ml , graduated pipette - 2 ml , graduated pipette - 5 ml , graduated pipette - 10ml , graduated pipette - 25 ml , volumetric pipette - 1 ml , volumetric pipette - 2 ml , volumetric pipette - 5 ml , volumetric pipette - 10 ml , volumetric pipette - 25 ml , pour point tube , flat bottom flask - 250 ml , test tube-flat bottom for carbon residue , separating funnel - 100 ml , separating funnel - 250 ml , separating funnel - 500 ml , separating funnel - 1000 ml , separating funnel - 2000 ml , silver corrosion tube set-amber , stopper measuring cylinder - 10 ml , stopper measuring cylinder - 25 ml , stopper measuring cylinder - 50 ml , stopper measuring cylinder - 100 ml , stopper measuring cylinder - 150 ml , stopper measuring cylinder - 250 ml , stopper measuring cylinder - 500 ml , stopper measuring cylinder - 1000 ml , filter flask - 500 ml , filter flask - 1000 ml , filter flask - 2000 ml , filter flask - 5000 ml , filtration assembly (47mm) , test tube with rim- copper corrosion , test tube- 10ml , tilt measure-5 ml , tilt measure-2 ml , tilt measure-1 ml , volumetric flask - 10 ml , volumetric flask - 25 ml , volumetric flask - 50 ml , volumetric flask - 100 ml , volumetric flask - 250 ml , volumetric flask - 500 ml , volumetric flask - 1000 ml , volumetric flask - 2000 ml , weathering tube , sample vials , vapour tight- 2ml , vials , vapour tight cap-30 cc. , variable bottle top dispenser with recir , splash head sloping pear shape - 24 / 29

CTN :45326601

10 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For supply of equipment for logistics department - paper tearing test measuring range 0 to 1000 mn capacity resolution 0.1 mn indication error 1 % tearing arm 104 1 mm tearing angle 27.5 0.5 tearing distance 43 0.5 mm, paper puncture testing machine energy range of weights - 6, 12, 24 joule per meter accuracy - 2% within full range release angle of pendulum - 90 display - led (digital) 7 segment power - 220v, 50hz,single phase highlights: sample holder - 1 pendulum release mechanism -manual material -mild steel finish - powder coated havel gray & gray combination finish and bright chrome/zinc plating for corrosion resistant finish, weighing machine max capacity (max) maximum load the scale can measure. (3 kg ), min capacity (min) minimum load required for accurate measurement. (0.25 kg), 0.1 g 1 g resolution, sling psychrometer, bursting strength tester capacity: commonly 0 40 kg/cm . accuracy: +or -1 % of the full range (often within 10% to 90% of capacity). resolution: 0.1 kg/cm . operation: microprocessor-based, digital display (lcd/led) with peak hold test fluid: glycerin (approx. 98% purified). power requirement: 220v, single phase, 50 hz. memory. clamping: pneumatic or manual, often with 1/4 hp motor. fluid displacement rate: 95 + or 5 cc/minute., digital micrometer (0-25mm with least count 0.0010) (0 25 mm, 0.001 mm), digital vernier caliper (0-150mm)

Central Government And Public Sector

CTN :44998879

01 Jun, 2026 NA

Bangalore - Karnataka

Tender For supply of anti wear type hydraulic oil as per is 8406(latest amendment)to the following specifications.(1)grade: vg 680.(2)kinematic viscosity at 40 deg cent,cst:612 to 728.(3)viscosity index (min):85(4)pour point ,c,max:0.(5)flash point,cleveland open cup,c min:230(6) demulsibility:cuff after centrifuging,mi,max:2.o.(7) demulsisbility:total free water collect- d during test(starting with 90 mi of water),min:70.(8)demulsibility:(for r and o type)percent water m oil after 5-hour test,max:0.5.(9) timken ep test ok load,min:27kg.(10)oxidation stability @ 121 degree c,312h,10 litres air/h: increase in kinmetic viscosity at 100 deg c not exceed 6 percent.(11)ash,percent by mass.max:0.1.(12)air release value,90 deg c minutes,max:20(13)copper strip corrosion for 3 houra at 100 degree c:not worse than 1.(14)four ball wear test at 20kg load,wear scar diameter,mm,max:0.35.(15)fzg-niemann ep test,pass load stage,min:11th. make & model:(a)m/s.ioc: servo mesh sp 680.(b)m/s.bpc:bharat amocom 680.(c)m/s.hpcl:parthan ep 680.(d)m/s.balmer lawrie:protomac sp 680.(e)m/s.ibp:ibp mesh 680.(f)m/s.castrol:alpha sp 680.or substantially equivalent. note:(1)the oil shall be supplied in only 210 litres metallicbarrels only.(2)test certificate should be supplied along with the material supply.(3)oem or authorized dealers/agents having the valid authorized dealership document and same shall be provided while quoting and also with the material supply.(5)the offer other than mentioned make and brands shall give the detailed test report as specified in the item description from nabl accreditation labs only. ]

Chemical Test Kit Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government / Public Sector

Central Government And Public Sector