Latest chemical workstation Tenders | Government chemical workstation Tenders

Central Government And Public Sector

CTN :42619692

12 Dec, 2025 31.45 Lacs

Delhi - Delhi

Tender For corrigendum : supply of stationery items d d - a3 envelope self adhesive , a4 envelope self adhesive , a4 paper 75 to 80 gsm , a4 sheet 120 gsm , a3 paper , accession register , attendance register , ball pen , battery cell aa type , battery cell aaa type , binder clips large , binder clips small , box file , brown tape packing tape , calculator , cd marker , cello tape 1 inch , cello tape 2 inch , cobra file cover , dispatch register , double sided tape 2mm thick , envelope size 122 x 176 mm , envelope size 220 x 310mm , filter paper , folder conference , glue stick , lab register , permament marker , plain register 250 pages , punching machine big , notice board push pin , register 100 pages , scissors , self adhesive flags , stamp pads , stock register non gfr , transparent tape , white board marker , correction pen , whiteboard duster , file board , white board , bond paper 100 gsm , locks and key , slippers , peon book , towel large size , air blower , colin glass cleaner , stock register consumable , document lebeller gun , chemical indicator for steam sterilization , bowie dick a4 steam sterilization process , white paper plain label sticker ) /bid number : gem/2025/b/6662935 * /dated: 06-11-2025 & & / bid document 1 / 46

CTN :42994940

16 Dec, 2025 2.24 Crore

Hisar - Haryana

Tender For supply of 5 mp bullet camera with suitable varifocal motorized lens for 120 meters (sip enabled) , 2 mp 32 x outdoor ir ptz network sip enabled camera , 5 mp indoor ir dome network camera with suitable lens for 30 meters , network video recorder 128 channels , network video recorder 64 channels , 10 tb hard disk , commercial grade 75" screen for monitoring , 8 port redundant ring gigabit ethernet switch with poe+ source (8rj45, 2 sfp) , 48 port gigabit l2 managed switch with 4sfp slots , 24 port gigabit l2 managed switch with 4 sfp slots , fiber module , galvanized pole of 20 feet length , installation of pole with civil work , protection camera cage with locks , weather proof outdoor boxes with locks , suitable network racks with accessories for hosting nvr at control room 27u rack , suitable network racks with accessories for hosting nvr at control room 15u rack , ups 7. 5 kva with smf batteries for 3 hours backup , power surge protector , chemical earthing pit with installation , armoured cat 6 (utp) cable with installation , armoured power cable 3 core 2. 5 sqmm , armoured 12 core sm outdoor ofc cable , armoured 24 core sm outdoor ofc cable , hdpe pipe 40mm , hdpe pipe 63mm , laying of fiber and electrical in duct: underground , necessaries hardware & accessories for cameras, electrical like thimble, for fiber like pigtal, patc , installation of full set up , splicing machine , otdr machine , sip server , video phone

CTN :43022581

13 Dec, 2025 1.95 Lacs

Kargil - Jammu And Kashmir

Tender For supply of honda grass cutting machine , hedge cutter , round up chemical , hand grander , no 1 rp gate frame welding labour charge

corporations/Associations/Others

CTN :42485358

15 Dec, 2025 55.80 Lacs

Thiruvananthapuram - Kerala

Tender For corrigendum : supply of digital radiography system type c (qty:10) - digital radiography system 50kw ceiling suspended type, single detector with all accessories as per specifications except the following, x-ray table 6 way floating table, dry imager with 2 online trays, additional detector (rate fixed for three years from the date of price bid opening), light weight lead apron with thyroid gaurd, additional workstation, x-ray trolley table (not taken for evaluation), x-ray table four way (not taken for evaluation), x-ray view box double film (not taken for evaluation), cost of one viewing station (hardware) with necessary software and ups (not taken for evaluation), fully automated full length image stitching on table and vertical bucky necessary hardware and software (not taken for evaluation), 15.12.2:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area beyond 3 sq. metres, 15.12.1:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area 3 sq. metres and below, 15.23.1:dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles 10 mm to 25 mm, 15.3:demolishing r.c.c. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of engineer -in-charge., 15.57:dismantling aluminium / gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by engineer - in-charge, 15.7.4:demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge.in cement mortar, 15.60:disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved, 2.1.1:earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:all kinds of soil, 50.2.25.1:filling with contractors own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site engineer-in-charge, 2.34.1:supplying chemical emulsion in sealed containers including delivery as specified.chlorpyriphos / lindane emulsifiable concentrate of 20%, 2.35.1.1:diluting and injecting chemical emulsion for post -constructional anti-termite treatment (excluding the cost of chemical emulsion):along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:with chlorpyriphos /lindane e.c. 20% with 1% concentration, 50.4.1.1:providing and laying in position cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) up to floor five level excluding the cost of centering, shuttering, finishing for leveling coarse of floor and roof etc., 50.5.33.2:providing and laying in position machine batched and machine mixed design mix m-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the

corporations/Associations/Others

CTN :42485371

15 Dec, 2025 75.33 Lacs

Thiruvananthapuram - Kerala

Tender For corrigendum : supply of digital radiography system type b (qty:10) - digital radiography system 80kw ceiling suspended type, single detector with all accessories as per specifications except the following, x-ray table 6 way floating table, dry imager with 2 online trays, additional detector (rate fixed for three years from the date of price bid opening), light weight lead apron with thyroid gaurd, additional workstation, x-ray trolley table (not taken for evaluation), x-ray table four way (not taken for evaluation), x-ray view box double film (not taken for evaluation), cost of one viewing station (hardware) with necessary software and ups (not taken for evaluation), fully automated full length image stitching on table and vertical bucky necessary hardware and software (not taken for evaluation), 15.12.2:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area beyond 3 sq. metres, 15.12.1:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area 3 sq. metres and below, 15.23.1:dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles 10 mm to 25 mm, 15.3:demolishing r.c.c. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of engineer -in-charge., 15.57:dismantling aluminium / gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by engineer - in-charge, 15.7.4:demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge.in cement mortar, 15.60:disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved, 2.1.1:earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:all kinds of soil, 50.2.25.1:filling with contractors own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site engineer-in-charge, 2.34.1:supplying chemical emulsion in sealed containers including delivery as specified.chlorpyriphos / lindane emulsifiable concentrate of 20%, 2.35.1.1:diluting and injecting chemical emulsion for post -constructional anti-termite treatment (excluding the cost of chemical emulsion):along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:with chlorpyriphos /lindane e.c. 20% with 1% concentration, 50.4.1.1:providing and laying in position cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) up to floor five level excluding the cost of centering, shuttering, finishing for leveling coarse of floor and roof etc., 50.5.33.2:providing and laying in position machine batched and machine mixed design mix m-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the

CTN :42983247

09 Dec, 2025 1.60 Lacs

Bathinda - Punjab

Tender For supply of compass liquid prismatic mk-iii , chemical gas detector nh3 , pst fence metal angle 1830mm , tear smoke grenade hand thrown 3 , electric wire 90 mtr , led tube light , mcb box , casing caping , socket 15 amp , spray gun , 1 inch gi pipe , 1 inch gi socket , 1 inch elbow , 1 inch tee , 1. 75 inch gi tee , . 75inch gi gate valve , . 75 inch gi pipe , . 75 inch gi elbow , . 75 inch gi socket , 1 inch fta , 1. 5 inch fta brass , . 5 inch elbow brass , solvent 200ml , teflon tape , 1 inch x1 inch nta , . 5 inch gi tee , . 5 inch gi pipe , . 33inch gi elbow , pressure gun , steaming machine

CTN :42974777

19 Dec, 2025 NA

Hyderabad - Telangana

Tender For supply of integration consumables d d - vapour cartridge mask , chemical hand gloves , trichloroethylene tce lab grade 2point 5ltrs bottle , loctite 242 50ml , fevikwick 20gms , steel rule 1 metre , steel rule 1point 2 meter , steel rule 2 meter , silicon grease 50 ml metroarc pack equal to 06 nos , rustolene 500ml pack , cleaning fabric white colour , surgical blade no 24 pack equal to 100nos , surgical blade handle , cotton hand gloves , surgical rubber gloves pack equal to 50 pairs , plumb bob , tube cutter ref part no ms tc 308 , safety wire wire lock wire od 0point 020 inches , safety wire wire lock wire od 0point 025 inches , safety wire wire lock wire od 0point 032 inches , crow foot adapter by wrench 20mm 3 by 8 inch square drive , crow foot adapter by wrench 14mm 3 by 8 inch square drive , crow foot adapter wrench 20mm 1by 2 inch square drive , wire twister by wire lock machine model rwtp6 blue point , force box stanly 46 pcs 1 by 4 inch square drive socket and bits stmt 72794 8 , abrading wheel 50x25x6mm , abrading wheel dia 50 grit 80 , abrading wheel dia 60 grit 80 , abrading wheel dia 24 grit 80 , tooth brush , emery paper 80p 1packequal to 50sheets , emery paper 220p 1pack equal to 50sheets , emery paper 320p 1pack equal to 50sheets , emery mop wheel dia50mmx25mm , hacksaw blade 2 inch x 24 inch , safe and clean gel industrial cleaner 250gms pack , permanent markers black blue red green , plastic container 500ml , plastic container 1000ml , paint brush 1 inch , paint brush 2 inch , wd 40 170ml pack , marker pen cd dvd writing , swagelok snoop solution , feeler gauge stanley 70115 s , clay putty moulding clay

CTN :42859015

12 Dec, 2025 NA

Bhopal - Madhya Pradesh

Tender For online tender for gym goods - olympic bench press (flat/ incline/ decline)-, olympic bench press (flat/ incline/ decline)-specification- olympic size suitable to use with olympic rods plate storage should be available on sidesproduct should of international standard. physical demonstration of equipment may be required to access the quality standards., lat pull down machine, lat pull down machinespecification- independent diverging press arms, and adjustable thigh pad wt. stack(min) 180lbs. instruction card to show how to use the machine. floor bolt down option for stabilityproduct should of international standard. physical demonstration of equipment may be required to access the quality standards., heavy duty commercial treadmill-, heavy duty commercial treadmill-specification- commercial treadmill , with shock absorption system, must have 8-10 individual shock absorbers. shock absorbers should not be made of rubber or urethane , rustproof, aluminium side rails and end caps, integrated speed and incline buttons should be available on user handles, side handles length: 23-25inch, to provide secure feeling while running at high speed. running belt with multi ply minimum 58 (l) x 20 (w) running surface. running belt should have incorporated technology for straight tracking, ideal gripping texture surface, must consume lower power. speed range: min 0.8kph to 20kph. incline range: min 0% to 15% (0.5% increments).rollers: 3.4 - 3.5" precision crowned steel rollers - front & back.motor capacity: min 3 hp ac continuous duty .heart rate: support both digital [contact electrodes] & polar , transport wheel for easy mobility. tray: must feature removable/lockable anti-theft cup holders 2nos, integrated accessory tray. frame: robust paint (corrosion, stain, and chemical resistant coating). maximum user weight: 175-185kg . display console: should have led display with digital readouts. demonstration of machine may be required for technical evaluation. certificate of origin may be asked. machine should be produced only in us/europe with high quality standard., chest machine, specification- independent converging arms wt. stack(min) 180lbs. instruction card to show how to use the machine. floor bolt down option for stability product should of international standard. physical demonstration of equipment may be required to access the quality standards., commercial elliptical cross-trainer :-, specification- commercial cross-trainer. must have different independent handles to offer both total body & lower body workout. moving handle must have multi grip function with integrated resistance keypads. pedals: must be oversized [12-16inch] with flex foam cushion. large knee clearance area to accommodate taller user. stride length: fixed stride length in the range 18-21inch. unit must be self powered with inbuilt generator & battery. resistance range: 20. step up height: 9-10inch. heart rate: support both digital [contact electrodes] & polar. transport wheel for easy mobility. frame: robust paint (corrosion, stain, and chemical resistant 3coating). maximum user weight: 175-185kg. demonstration of machine may be required for technical evaluation.certificate of origin may be asked. machine should be produced only in us/europe., dumbbells with dumbbell rack: -, dumbbells with dumbbell rack: -specification- rubber coated hex style fixed dumbbells, proper handgrip in 2.5kg, 5kg, 7.5kg, 10kg, 15kg, 20kg pair each. storage rack with proper design to store dumbbells (2 tier), electro statically powder coat finish., dumbbells with dumbbell rack: -, specification- commercial shoulder press biomechanical correct movement to target shoulder muscles. wt. stack (min) 170lbs. machine should have adjustable seat for adjusting range of motion. frame: powder coated, corrosion, stain, and chemical resistant coating instruction card to show how to use the machine. should incorporate counter balance weight for low starting resistance. product should of

State Government

CTN :42752053

03 Dec, 2025 NA

Ranchi - Jharkhand

Tender For corrigendum : rate contract for cath lab at sadar hospital ranchi - cardiac catheterization laboratory (as per tender document), temporary pacemaker, portable echocardiography, plasma sterilizer system, sterilant: cassette, chemical indication tape, chemical indicator strips, biological indicator per vial, trays with silicon mats:/basket (ss) - 24 x 8x2, trays with silicon mats:/basket (ss) - 18 x 4 x 2 inches, trays with silicon mats:/basket (ss) - 10 x 6 x 2.25, endoscopic holders 5 mm and 10 mm, sealing machine, sealing material tyvac rolls - 16 (40 cm), sealing material tyvac rolls - 14 (35 cm), sealing material tyvac rolls - 10 (20 cm)

CTN :42930664

09 Dec, 2025 40

Multi City - Karnataka

Tender For procurement of cleaning materials for h gollahalli gp for the year 2025-26/2026-27 - coco broom with 5 feet length only natural product to sweep the outdoor only, garbage cover small size, metal type big web stick16 to 24 feet length, small web stick 8 feet, metal dust pan, plastic dust pan, water jug normal size, plastic bucket, system herbicide glyphosate 41% sl, ammonium salt of glyphosate 71 % sg powder, grass cutter or weed cutter 4 stroke engine honda or other brand made company only 1 year motor warranty only without spares running petrol only, grass cutter or weed cutter 2 stroke engine with weed cutter 250meter wire 2sets of blades 1 year service warranty period without spares only china make only no brand petrol and oil running, with push cart set and 3phase honda motor and pump 100 meter flexible hose cable 2no spray guns 250 ltr capacity tank 1 year warranty for motor out of service is free up to 1year spare are chargeable, battery & manual sprayer to wear the back side 16ltr capacity tank no warrant for battery only service warranty 6months without spares only , giantbigfogging machine 1.9 ltr consumption ltr per hr chemical tank 5ltr capacity hand pump 3 to 4 time then cahrgeble battery running 1 year service warranty only with spares and labour charge are extra. to diesel and petrol running only, mini small fogging machine to spray for mesquites no warranty product to use diesel and mini gas can, the composition of malathion tech 5.0% based on 95% chain clay 10% soapstone, toilet cake or odonil fragrance of wash room purpose only, bamboo ladder, mop small cloth to use office table and chairs cleaning purpose only, clip mop set it use moping purpose to office only, apron, sodium hypo chloride, weed control chemical, mask branded, gum boots branded, pvc hand gloves 16 inches, coco broom, soft broom, toilet cleaning acid, malathion oil 5.0% e.c, pesticide (fogging chemical with water mix), fogging chemical (with fuel mix), black phenyl, white scented phenyl, alum crystal, malathion dust 5.0%e.c, bleaching powder 33% chlorine, safety helmets, sanitizer

Chemical Workstation Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

corporations/Associations/Others

corporations/Associations/Others

State Government