Latest chest wader Tenders | Government chest wader Tenders

State Government

CTN :45413136

15 Jun, 2026 NA

Khaperkheda - Maharashtra

Tender For work of in-situ repair of bowl hub with fitment of developed wear resistance split sleeves along with top and bottom labyrinth seal at unit#5, 500 mw, tps khaperkheda.

CTN :45379491

17 Jun, 2026 10.00 Lacs

Hoshangabad - Madhya Pradesh

Tender For annual rate contract for supply of spare parts and vehicle related maintainance work - 16 (1.6mm) ms ( / ), : ( ), : , (hinges), , : , , : - pu/metal paint , / ( ) (mahindra 575 di, eicher 333, tata 510 sfc 100 bs, tata 709, tata ace gold petrol, tata ace bs6 gold, tata ace bs4 gold ) "mrp " (percentage discount on mrp), ( - , , , ), (tata ace ) , , ( / ), - , , , (tata ace gold): 15w40 (api ch-4/ci-4), ( ): / 15w40 (premium), : grade 68 (anti-wear), : 80w90 / ep-90, : dot 3 / dot 4, (coolant): - pre-mixed / concentrate, (grease): mp3 grease / high temp, ( ): original (tgp), : , (def)bs6 diesel exhaust fluid (def) ( tata motors/veedol/castrol) , ( ): / original, : obd-ii , dpf : , : ecu / , pa (ahuja amp 60-80w, mic, horn) , 12v ( - exchange basis) 100 amp, 12v ( - exchange basis) 80 amp, , , , (tata ace gold - ceat/mrf/jk) rear/front 155d12, (tata ace gold ), ( - / ) 6.0016, ( - / ) 13.6.28, tata 709 fire brigade tyre 7.50.16, tata 510 skylift 6000.16, trolley 1000.20, water tanker tyre 8.25.16, water tanker tyre 9.00.20, (small), (medium), (big)

Central Government/Public Sector

CTN :45382124

13 Jun, 2026 NA

Multi City - Chhattisgarh

Tender For scope of work (sow) as mentioned in tender and schedule of work( 4 )items as given below ,[1] cltng,capital maint scrap etc,plant-bof 195.000 to,[2] cltng,wear scrap 7000.000 to,[3] loadg,r/mill arising of cut cobble etc 35000.000 to,[4] cutting, capital maint scrap,etc. plant 25000.000 mt

Central Government / Public Sector

CTN :45311469

08 Jun, 2026 NA

Panipat - Haryana

Tender For corrigendum : procurement of rotex make product classifier/ separator spares - list of item(s) / work(s) as per tender documents, linked belt drive,p/n:p0710410162, crankpin assembly 80series p/n:24422 kit, wear plate slider uhmw12"/14" p/n 126606, carbon slipper ball,p/n:27153,rotex, slide ball socket ,p/n:27184,rotex, slide plate ,p/n:17155,rotex, epdm seal strip,p/n:132168, mach tool tension spring 410ss,p/n:49904, white neoprene ball,p/n 30583, slide brg assy 50,greased,p/n:63447, outer shield cstg,p/n:64294

State Government

CTN :45217751

15 Jun, 2026 7.13 Lacs

Multi City - Chhattisgarh

Tender For corrigendum : work contract for reconditioning of worn-out ash mixer body of 165 tph mixer using special wear-resistant metallic putty for ahp at 2x500 mw, abvtps, cspgcl, janjgir-champa.

State Government

CTN :45343214

04 Jun, 2026 56.93 Lacs

Daman - Gujarat

Tender For providing and supplying of auxiliary items for old collectorate, daman - civil works others, providing and fixing 25mm thick commercial grade plywood on ms structural framework, including fabrication and erection of necessary m.s. square/rectangular pipe structure, cutting, welding, grinding, primer painting, fixing of plywood with suitable screws, nuts, bolts and approved hardware fittings, complete with all labour, materials, tools & tackles, transportation, loading/unloading, scaffolding and finishing work as directed by the engineer-in-charge., providing and fixing 15mm thick engineered solid wood flooring of approved make such as mikasa or equivalent, comprising top uv coated wooden wear layer bonded on plywood base, in approved shade and pattern, including surface preparation, underlay wherever required, adhesive fixing, cutting, edge finishing, skirting/joint treatment, complete installation with all necessary accessories, labour, tools & tackles, transportation, loading/unloading and finishing work as directed by the engineer-in-charge., providing and fixing 15mm thick engineered solid wood flooring skirting and t-patti work in approved shade and finish, including 75mm / 50mm size matching wooden skirting, plywood base/patti as required, fixing with suitable adhesive, nails and hardware accessories, cutting, edge finishing, polishing and complete installation with all labour, materials, tools & tackles, transportation, loading/unloading and finishing work, complete as directed by the engineer-in-charge., providing and fixing 3mm thick underlay foam sheet below wooden flooring, of approved quality and make, including surface cleaning and preparation, laying with proper alignment and jointing as per manufacturer specifications, complete with all labour, materials, tools & tackles, transportation, loading/unloading and necessary finishing work, as directed by the engineer-in-charge., labour charges for laying and fixing wooden flooring, including application of approved adhesive/glue and liquid compound, proper cutting, fitting, alignment and finishing of flooring boards/tiles, complete with necessary labour, tools & tackles, handling, cleaning and all incidental works required for proper installation, as directed by the engineer-in-charge., providing and fixing gypsum board partition/wall panelling above bathroom wall area, using approved quality moisture resistant gypsum board fixed on g.i. framework with necessary channels, studs, screws and jointing compound, including cutting, finishing, taping of joints, surface preparation and complete installation with all labour, materials, tools & tackles, scaffolding, transportation, loading/unloading and finishing work, as directed by the engineer-in-charge., providing and fixing room carpet of approved quality, design, colour and make, suitable for indoor flooring application, including necessary underlay wherever required, cutting to required size, transportation, loading/unloading and all incidental charges, complete as directed by the engineer-in-charge., providing, testing & commissioning 40 litre capacity solid door thermo-electric mini bar/refrigerator of approved make and model, suitable for hotel/office/residential use, complete with adjustable shelves, temperature control system and all standard accessories, including transportation, loading/unloading, placement at site and testing & commissioning, complete as directed by the engineer-in-charge., providing and fixing hotel safety locker/safe of size 200 x 420 x 370 mm, black colour, with electronic digital locking system, suitable for hotel/office/residential use, complete with mounting accessories and standard fittings (battery not included), including transportation, loading/unloading, installation and testing, complete as directed by the engineer-in-charge., providing testing & commissioning double layer electric kettle, black colour, of approved make and capacity, with stainles

corporations/Associations/Others

CTN :45324394

16 Jun, 2026 1.99 Crore

Ahmedabad - Gujarat

Tender For repair work of wear & tear of c.c. surface by high performance, fast setting and curing free geopolymer mortar and repair of patch and pothole repair by high performance, fast setting and curing free geopolymer concrete at diff.existing bridge carriageway of bridge project ahmedabad municipal corporation (arc)

corporations/Associations/Others

CTN :44856671

29 May, 2026 NA

Hyderabad-T - Telangana

Tender For bid to ras supply of consumables as per annexure-f - paint brush, paint brush, paint brush, hose pipe pvc braided, hose pipe clamp ajdustable-55, foam gasket with adhesive 1 inch, foam gasket with adhesive 2 inch, velcro black, velcro black, araldite standard epoxy adhesive, fevikwik, fevicol sr 998 synthetic, rubber adhesive, hinges, pu adhesive sealant pu 540, paint remover, knifing metal paste, rust remover, face sheild, face sheild, apron leather, apron, earplugs, safety googles industrial., safety helmets, spray gun pilot type-595, spray gun pilot type p-80, hand gloves leather, hand gloves cotton, hand gloves nitrile palm, coated, hand gloves nitrile, nose masks yellow, mask welding respirator, mask painting respirator, welding rods ms 6013, welding rods ms 6013, welding rods ms 6013, locktite high strength, emry paper, measuring tapes, measuring tapes, wire brush welding, pu tube for pneumatic pipe, blue, pneumatic adapter 2-1 way -, pu tube 8mm, paper tape, paper tape, protective work wear, (dungree)

State Government

CTN :44491922

05 Jun, 2026 95.87 Lacs

Anuppur - Madhya Pradesh

Tender For corrigendum : work contract for overhauling and repair/refurbishment of boiler feed pump cartridge (model fk6d30 weir make) along with supply of spares for bfp of 210 mw unit atps chachai. - impeller wear ring (eye) (1 set = 1+5 nos.) , ring section wear ring (1 set = 1+5 nos.) , impeller wear ring (neck) (1 set = 5 nos.) , diffuser wear ring (eye) (1 set = 5 nos) , thrust pads (1 set = 16 nos.) , balance drum , balance drum nut , balance drum lock washer , journal bearing glacier type de (1 set = 2 halves) , journal bearing glacier type nde (1 set = 2 halves) , o rings & back up ring , balance drum restriction bush size - 194mm , locking screws , thrust collar nut & washer , oil guard (1 set = 3 nos.) of & you , oil thrower (1 set = 3 nos.) the & then , mechanical seal complete for de & nde (make-flowserve) , copper coated gasket , set of fasteners , air breather (1set= 2 nos) , coupling nut , spring disc , thrust bearing split oil seal , thrust collar , stellite bush , dowell pin , impeller abutment ring (1 set = 5 nos.) , impeller (1 set=6 impellers) , thrust pad carrier ring for de & nde , diffuser (1 set 6 diffusers) , ring section (1set=5nos) , pump shaft keys & nuts , inboard bearing housing , outboard bearing housing , water jacket for the & you (1set=2 pcs) , suction guide seal housing with plugs de & nde (1set=2

State Government

CTN :45275642

02 Jun, 2026 3.07 Lacs

Serampore - West Bengal

Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging

Chest Wader Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors