Latest chilled water installation Tenders | Government chilled water installation Tenders

Central Government/Public Sector

CTN :45420192

13 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of axial fan for chller of machine 1533- as per item# 1 of attached specification,axial fan for cooling unit of machine 1510- as per item# 2 of attached specification,axial fan for cooling unit of machine 1533- as per item# 3 of attached specification,axial fan for cooling unit of machine 1511- as per item# 4 of attached specification

State Government

CTN :44955399

08 Jun, 2026 NA

Karur - Tamil Nadu

Tender For corrigendum : renovating the wet and dry end cooling fan duct in paper machine 2 in paper electrical at tnpl unit i

CTN :45384476

11 Jun, 2026 NA

Dharmapuri - Tamil Nadu

Tender For purchase of equipments for mechanical department - purchase of equipments for mechanical department, tail stock assembly medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, working model of fuel supply system - petrol mpfi type petrol multi point fuel injection (mpfi) system for dismantling and assembly practice system type: non-working / cut-section model for study of internal construction construction: actual automotive components or equivalent training model mounted on frame includes throttle body (sectioned), fuel injectors, fuel rail, intake manifold includes fuel pump, fuel tank (dummy), fuel filter, pressure regulator includes ignition system components: ignition coil, spark plug, distributor (if applicable) ecu module (dummy/display type) with wiring layout representation all components cut-open, painted, and clearly labelled provision for manual demonstration of flow path and component interaction mounted on rigid ms powder-coated frame designed for repeated dismantling, assembly, and component identification, hydraulic cylinderbore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply: mounted on training base suitable for dismantling and inspection, hydraulic operated directional control valves (dcv) type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study, bearing with shaft assembly type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips end covers mounting: bench-mounted / frame mounted unit, coupling unit using driving and driven shafts using plummer block bearing unit the plummer block housing material: cast iron (grade fg 200 or equivalent). type: sng or snl series (split-type housing). sealing: felt seals or v-ring seals (to demonstrate lubrication retention). lubrication: provided with a grease nipple at the top center for manual lubrication practice. the bearing type: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series). bore diameter: standard 25mm or 30 mm. shafting and coupling shaft material: ground carbon steel (en8 or en9) for high surface finish. coupling type: flexible coupling: to demonstrate the bearings ability to handle slight misalignment. rigid flange coupling: to demonstrate traditional direct connection. driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., 3d printing machine build volume(wxdxh) 256 x 256 x 256 mm shell enclosed (plastic & glass) hot end all-metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps time lapse supported filament run out sensor :yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter

CTN :45384495

06 Jun, 2026 NA

Vellore - Tamil Nadu

Tender For mech dept lab items dept use - 3d printing machine build volume(wxdxh) 256 x 256 x 256 mm shell enclosed (plastic & glass) hot end all-metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps no 90000 timelapse supported filament run out sensor :yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter

CTN :45363431

12 Jun, 2026 NA

Sivaganga - Tamil Nadu

Tender For purchase of equipments ( s.no 1 to s.no 4 ) for mechanical department - purchase of equipments, slip gauge set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatness / parallelism: 0.5 mstored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes, dc motor type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 poleconstruction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly , bearing with shaft assembly type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips lock nuts end covers mounting: bench-mounted / frame-mounted unit, 3d printing machine build volume(wxdxh) 256 x 256 x 256 mm shell enclosed (plastic & glass) hot end all-metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm,0.8mm build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps timelapse supported filament run out sensor :yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter

CTN :45343663

11 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For purchase of lab equipments for heat power engineering lab and 3d printer for mech department - five gas analyzer (exhaust gas)* portable 5-gas exhaust analyzer for automotive lab use * measurement of co (0 10%), co (0 20%), hc (0 20000 ppm), o (0 25%), nox (0 5000 ppm) * gas sampling rate: 1 litre/min * response time: 5 seconds * warm-up time: 3 minutes * display: lcd * input: membrane keypad* operating temperature: 0-50 c * power consumption: 25 w, operates on 230v ac / battery * supplied with sampling probe, filters, and carrying case, 3 d printing machine build volume(wxdxh) 256 x 256 x 256 mm shell enclosed (plastic & glass) hot end all metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps timelapse supported filament run out sensor :yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter

State Government

CTN :45353592

17 Jun, 2026 NA

West Nimar - Madhya Pradesh

Tender For rate contract of equipment maintenance items - computer parts, mother board acer/dell/hp/lenovo, graphic card 4 gb, ssd 128 gb, ssd 256 gb, ssd 512 gb, ssd 1 tb, smps acer cpu, smps dell cpu, smps hp cpu, smps lenovo cpu, ram (ddr 3) 4 gb, ram (ddr 3) 8 gb, ram (ddr 3) 16 gb, ram (ddr 4) 4 gb, ram (ddr 4) 8 gb, ram (ddr 4) 16 gb, computer format driver and software instolation, vga cable 3 miter, power cable 1.50 miter, hdmi 5 miter, hdmi 1.50 miter, usb extention cable, usb hub, lcd powr supply change, lcd vga port change, cpu fan, cmos battery, cabinet / case, wi-fi card, hdmi / displayport, lan port, all moitor display change, mother board power ic change, mother board display ic change, all mother board repair, normal power supply repair, acer/dell/hp/lenovo branded power supply repair, mouse pad, hdd 128 gb enternal, hdd 256 gb enternal, hdd 512 gb enternal, hdd 1 tb enternal, hard disk (usb) 3.0 1tb seagate/wd external, hard disk (usb) 3.0 2tb seagate/wd external, hard disk (usb) 3.0 3tb seagate/wd external, hard disk (usb) 3.0 4tb seagate/wd external, hard disk (usb) 3.0 5tb seagate/wd external, window 10 pro full package license, window 11 pro full package license, ms office 2021 pro package license, ms office 2024 pro package license, service charge, all in one computer parts, mother board interl chip change, power supply change, smps change, hard disk 2 tb, hard disk 500 gb, nvme ssd 256 gb, nvme ssd 128 gb, all all in one repair, all all in one display change, ram 4 gb, ram 8 gb, ram 16 gb, ram 32 gb, ssd 128 gb, ssd 256 gb, ssd 512 gb, ssd m2- 128 gb, ssd m2- 256 gb, ssd m2- 512 gb, service charge, canon/hp/brother printer etc. repairs and parts change, hvt, logic card, logic board, all printer power supply, perssour roller, paper picup rod change, pikup roller cluch, fuser assembly, fuser strip, fuser, scanner, scanner glass, scanner lamp, laser scanner unit, gear assambly, teflon, pick up rollar assamblay, tank change inkjet printer, all printer power supply repair, tray rollar, drum, drum unit, pcr, megnet rod, chip, arthing cencer, blade change, toner refling all printer, power supply, feed roller, separation pad, paper tray, exit roller, heat roller, usb / network port, adf (auto document feeder), display panel, sensors, service charge, hp/acer laptop and repars parts change, power adaptor, mother board, battary, body, screen, laptop format driver and software instalation, all laptop repair, mother board, keyboard, touchpad, hinges, processor (cpu), webcam, service charge, foxin/bpe line/zebronic/uniline interactive/arrow/smtek/microtek etc. parts change and repair, 7 ah 12 vott. battary change, 26 ah 12 vott battary change, 42 ah 12 vott. barrary change, pcb bard, ups repair, power supply, transformer, sensors, display panel, capacitors, cooling fan, fuse / mcb, input / output terminal, 12v battery, service charge, canon/sharp/toshiba/hp/konica photocoy machine a3 printer parts change and repair, fuser, fuser unit, heat roller, pressure roller, heater lamp, thermistor, fuser film, scanner, scanner glass, scanner motor, ccd/scanner sensor, scanner lamp, mirrors & lens, leser unit, cluch, regestration cluch, pcr, dr blead, wiper blead, magnet, gear, gear unit, main motor, drum unit, opc drum, drum shaft, cleaning blade, developer unit, toner hopper, pickup roller, feed roller, separation pad, paper tray / cassette, delivery tray, smps / power supply, main board (pcb), display panel, sensors, motors & gears, adf (auto document feeder), drum cleaning blade, charge roller, transfer roller, transfer belt, developer, adf roller, charge corona unit, duplex unit, finisher unit, cooling fan, touch display panel, service charge, epson scanner parts change and repair, adf unit, input tray, input tray extension, output tray, output tray extension, edge guides, paper stopper, pickup roller, separation roller, feed roller, exit roller, cis sensor (contact image sensor), scanner glass, led lamp, scan head, calibratio

CTN :44958873

27 May, 2026 NA

Meerut - Uttar Pradesh

Tender For bid to ras supply of backing pad for sanding machine : - backing pad for sanding machine gex thirty four one hundred fifity , float valve three inch metal for test bed no twenty one , spider l two twenty five for test bed no twenty one , gate valve two inch metal for test bed no twenty one , t pin connected with wire for ac two ton split , pressure pipe steel for press sleeving hydraulic machine , screw thread lead screw for lathe machine , solid tyre size seven to twelve for forklifter five ton , solid tyre size three hundred to fifiteen for forklifter five ton , bearing gen set sixty three kva , potentiometer potel vr three to fifty k ohm for power supply regulated sixty four v five a , on off switch for power supply regulated sixty four v five a , cooling fan two twenty v four inch for power supply regulated sixty four v five a , copper winding wire twenty one swg for lathe machine capstan , copper winding wire twenty three swg for lathe machine capstan , phase preventerfor lathe machine capstan

Central Government/Public Sector

CTN :45275117

27 May, 2026 NA

Sultanpur - Uttar Pradesh

Tender For supply of oem spares for 2.5m/4.5m vertical borer machine - simodrive 611 infeed/regen.feedback module 120/156 kw, closed-loop control internal cooling., simodrive 611 power module, 1 axis, 400 a, internal cooling, add-on fan requierd or cooling f. hose cool. motor rated feed = 140 a main, sitop psu8200 24 v/40 a stabilized powersupply input: 400- 500 v 3 ac output: 24 v dc/40 a6ep34378sb000ay0, part no.- 6ep13341ld01, psu100d 24 v/14.6 a stabilized power supply input: 100-120 v/200-240 v ac output: 24 v dc/14.6 a; make: siemens (machine name-2.5m vertical borer machine; make: m/s premier ltd., pune /4.5m vertical borer machine; make: m/s umaaro sa, romania)

CTN :45116510

27 May, 2026 NA

Malda - West Bengal

Tender For supply, installation, testing and commissioning of air washer unit consists the following : (i) air cooling machine of capacity 51,000 cmh with 2 nos. centrifugal fans (1 no. working & 1 no. stand by), 2 nos. 15 kw electric motors (1 working one standby), v-belt drive for both the fans, celdek pads, 4 bend pvc eliminators, water pump 0.75 kw (1w+1s), water distribution system with pumps, piping?s, valves etc., air intake filters, g.i. air intake louvers,fan outlet electrically operated actuator dampers and complete in all respect as per spec. (ii) supply with erection of of g.i. ducting- supply air-(a) 0.8 mm ( 22 swg )-160 sq. metre (b) 0.6 mm ( 24 swg )-175 sq. metre (iii) supply, erection and commissioning of supply air grill with vcd of size : 450 x 250 mm-21 nos (iv) supply, installation and commissioning of volume control dampers-2 sq.metre. (v)supply and erection of structural m s support for ducts -500 kg. (vi) supply and erection of gravity air louver size: 300 x 300 mm for exhaust system-21 nos. (vii)supply, erection and commissioning of starter panel drivers -01 set [ warranty period: 36 months after the date of delivery ]

Chilled Water Installation Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector