Latest chin link fencing Tenders | Government chin link fencing Tenders

State Government

CTN :45604581

07 Jul, 2026 50.00 Lacs

Narsinghpur - Madhya Pradesh

Tender For purchase of fencing material - rcc fencing poles type - straight length - 2.45 meter dimensions - bottom 15x15 cm square, top 10x10 cm square. cement concrete mix -cement, sand and metal ratio 1:2:4 with 12.5 nominal size coarse aggregate. sand used should be free from clay and salt. concrete mix shall be conforming to grade m-15.reinforcement - 4 round vertical bars of 6 mm diameter. 13 nos. of stirrups of 6 mm diameter round ms bars 25 mm center to center.hooks - 7 no.,top hook should be provided 100 mm below the top of poles, and bottom hook should be provided 500 mm above the bottom of poles. the central distance between the top and bottom hooks shall be equally divided to fix remaining hooks. manufacturing - in order to ensure desired compressive strength, rcc fencing poles should be compacted with the help of platform vibrators, surface should be uniform and free from voids. the concrete cover over the reinforcement should not be less than 1.5 cm, rcc fencing poles type - straight length - 2.00 meter dimensions - bottem 10x10 cm square, top 8x8 cm square. cement concrete mix -cement, sand and metal ratio 1:2:4 with 12.5 nominal size coarse aggregate. sand used should be free from clay and salt. concrete mix shall be conforming to grade m-15. reinforcement - 4 round vertical bars of 6 mm diameter. 11 no. of stirrups of 6 mm diameter round ms bars 20 cm center to center. hooks - 5 no., bottom hook should be provided 60 cm above the bottom of the poles, second at 82.5 cm, third hook 112.5 cm. fourth hook at 150cm, top and fifth hook at 195 cm from bottom. manufacturing - in order to ensure desired compressive strength, rcc fencing poles should be compacted with the help of platform vibrators, surface should be uniform and free from voids. the concrete cover over the reinforcement should not be less than 1.5 cm., prcc fencing poles type straight length - 2 meter - each fencing pole shall be of square cross-section measuring 100 mm × 100 mm. the pole shall contain 4 nos. vertical reinforcements made of 4 mm diameter high tensile steel wire. each 2.0 meter fencing pole shall be provided with 6 nos. holes. the top hole shall be provided at 100 mm below the top of the pole. the bottom hole shall be provided at 500 mm above the bottom of the pole. the centre-to-centre distance between the top and bottom holes shall be equally divided for the remaining holes. ‘j’ hooks shall be made of 6 mm diameter ms bars with proper threading at one end, along with nut and washer for tightening purpose. the ‘j’ bolts/hooks shall pass through the holes provided in the fencing poles

State Government

CTN :45558226

24 Jun, 2026 34.31 Lacs

Chamba - Himachal Pradesh

Tender For corrigendum : tender for prov. and fixing of equipment / material , design, erection, testing , commissioning for sop to jsv for inspection hut at cheel bangla chowari by prov. 11/0.4 kv 100 kva dtr along ht, lt line in es chowari-ii (u) esd chowari ed dalhousie - (a) supply part-11/.4 kv 100 kva distribution sub station, 11/.4 kv 100kva dtr (rec sep. ord 11/1976, prov. st pole pole 9 mtr. long w/l 220kgs, muff for steel tubular pole with concrete filling, x-arm: [channel iron (100x50x5 mm), length : 2800 mm x 2 nos] for incomer line, ms a.i.(50x50x6 mm), length: 2800 mm x(2 nos for las ), x-arm: [channel iron (75x40x5 mm), length : 2800 mm x 4 nos] for supporting do fuse unit & go switch, x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for transformer bed, x-arm [channel iron (100x50x6 mm), length : 460 mm x 2 nos for supporting main channel of transformer], ms a.i.(50x50x6 mm), length: (2800 mm) x 1 no., ms a.i.(50x50x6 mm), length: (950 mm) x 2 nos. of bed knee bracing, ms angle iron (50x50x6 mm), length : (2800 mm) x2 nos for transformer lt distribution box and g.o switch fixing assembly, g.i. wire for earthing, ms angle iron (50x50x6 mm), length : (450 mm)x1 nos for transformer lt distribution box and g.o switch fixing assembly, g.o. switch handle supporting: [c.i. (75x40x6mm), length: 460mm for transformer lt distribution box and g.o switch fixing assembly, g.o ab switch unit (11kv,400,663ka) tripple pole o/d type, d.o fuse unit, surge arrester, 9 kv station class, discs insulator sets (comp. 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) i/c dead end clamps etc.), stay set complete, stay wire (7/3.15mm)( 10 kg per stay set), pipe earthing with gi,charcoal & salt, prov. lt distribution panel with mccb (160 a, 10 ka, 4p,1 no.) & sfu (32 a 5 no. rewireble) for 100kva trf. as per specification, half clamp (m.s. flat 50x6), full clamps (m.s. flat 50x6), m. s. nuts & bolts off sizes (galvanised coated) [prefarably 16mm or more (with flat and spring washer), aluminium thimbles 300 mm sq., copper thimble 200 mm sq., danger plate, barbed wire (rec sp f 3/1981), lt cable 3-1/2 core-185mm sq., alluminium paint, prov.acsr, 6/1/3.35 mm, chain link fencing , angle iron, gate etc. for transfromer fencing, prov. transformer bed plinth for 1x400kva s/stn structure complete with cc 1:6:12 r.r. massonery & plastering etc. a/w chain link fencing, angle iron gate etc. for dtr fencing., lt switched caapcitors 36-kvar for 100 kva dtr, trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure)., supplying and stacking of good earth at site including royalty and carriage upto 5 k m lead complete (earth measured in stacks will be reduced by 20% for payment)., fine dressing of the ground., spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately)., supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : screened through sieve of i.s. designation 20 mm, filling mixture of earth and sludge or manure in the desired proportion in trenches, flooding with water and leveling (cost of supplying earth and sludge or manure and mixing excluded)., providing and fixing korean grass turf superior qualitywith earthy 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (dhurmos) and than rolling the surface with light roller make the surface smoothen and light, watering with sprinkler and maintenanc

Central Government/Public Sector

CTN :45636122

06 Jul, 2026 49.47 Lacs

Cachar - Assam

Tender For fencing of basketball court, installation of pp tiles on existing court surface and development of surrounding area with concrete paver block.

Central Government/Public Sector

CTN :45463515

29 Jun, 2026 22.39 Lacs

Mumbai - Maharashtra

Tender For corrigendum : repair to storm water drainage system,drain cover,fencing hardstanding and other miscellaneous petty repair and periodical services,repair to joinery,roof sheet incl sunken treatment,roof repair and comprehensive maint of distressed concrete member at erangal

CTN :45291665

24 Jun, 2026 NA

Nilgiris - Tamil Nadu

Tender For bid to ras supply of tata iron fencing chain link net for fencing mesh d fence , l angel , concertina coil , flat paitta , 10mm round rod 345 nos , barbed wire 2mm thickness , bolt nut washer 12mm thickness , painting work , cement concrete using 20mm metal m sand cement , labour bush cutting and labour.

State Government

CTN :45625466

02 Jul, 2026 16.05 Lacs

Gautam Budnagar - Uttar Pradesh

Tender For providing and fixing of open gym equipment and g.i chain link fencing open gym in village chanchali yea wc-6 - sit up station: providing, designing and fixing of double sit-up station of size 1500 x 1150 x 650mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe of 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80 - 120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. seat and base plate cover to be made up from virgin lldpe manufactured by rotational molding with minimum thickness of plastic as 8mm, colorful and uv resistant and environmental friendly. the equipment to be fixed on ground with concrete of minimum strength m-25 and j shape welded bolts and once the concrete is set, fix the equipments on to it and cover nuts and bolts with the base plate. all complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal) and fixing of equipments etc. (the cement concrete and excavation work shall be paid separately). (ar/yeida/uppwd/sor-2020), leg press: providing, designing and fixing of leg press of size 2000 x 550 x 1600 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80 - 120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. handle bars to be provided with high quality grip rubber on top end. pedals shall be made up of nylon alloy with rounded edges to prevent any impact of injury. seat and base plate cover to be made up from virgin lldpe manufactured by rotational molding with minimum thickness of plastic as 8mm, colorful and uv resistant and environmental friendly. bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by engineer in charge. equipment to be fitted with inbuilt limiters to prevent unwanted movements. all open ends of pipe to be closed by gi/ lldpe caps for user safety. the equipment to be fixed on ground with concrete of minimum strength m-25 and j shape welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. all complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc (the cement concrete and excavation work shall be paid separately). (ar/yeida/uppwd/sor-2020), seated chest press: providing, designing and fixing of seated chest press in a pair of size 1800 x 700 x 2000 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80 - 120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. handle bars are to be provided with high quality grip rubber. pedals shall be made up of nylon alloy with rounded edges to prevent any impact or injury. seats and base plate cover to be made up from virgin lldpe manufactured by rotational mounding with minimum thickness of plastic as 8mm, colorful and uv resistant and environmental friendly. bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by engineer in charge. equipme

Central Government/Public Sector

CTN :45619697

25 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - scrap structural released of ohe consisting of masts, rod, pipes, fencing, i-section, bond strips,tess girders,r.s joists,street light pole, angle channels, plates, nut bolt pin stripes, structural rails, rivet, girder plate including bridge girder, structural base embedded with or without concrete attachment and fitting items and other ms and ci attachment. location- a by 3

State Government

CTN :45599825

23 Jun, 2026 NA

Hamirpur(Hp) - Himachal Pradesh

Tender For providing and fixing syntethic flooring in 1no tennis court and providing steel fencing in tennis court providing cement concrete around the court) deposit work

Central Government/Public Sector

CTN :45050939

06 Jul, 2026 1.40 Crore

Khadakwasala - Maharashtra

Tender For corrigendum : 81813 design and construction of addn/altn concrete jetty, retaining wall, fencing, steps and store at peacock bay at nda khadakwasla

CTN :45587200

02 Jul, 2026 NA

Darjeeling - West Bengal

Tender For supply of concrete sub base and provision of storm water , synthetic flooring , flood lighting , volleyball pole with net , volleyball , chain link fencing , scoreboard

Chin Link Fencing Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors