Latest chipping goggle Tenders | Government chipping goggle Tenders

CTN :45404122

09 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

Central Government And Public Sector

CTN :45119044

05 Jun, 2026 NA

Kudankulam - Tamil Nadu

Tender For corrigendum : supply of idler and bush complete set for johnson pump make, type tgh-15-50-s3-oo-cs2-cg2-gs-av, part no.600 , rotor and shaft complete set for johnson pump make, type tgh-15-50- s3-oo-cs2-cg2-gs-av , part no.700. , bush bearing for shaft of johnson pump make, type tgh-15-50-s3-oo-cs2-cg2-gs- av, part no.710. , set screw - stainless steel johnson pump make, type tgh-15-50-s3-oo-cs2-cg2-gs-av , part no.720. , pin cover - duplex stainless steel johnson pump make, type tgh-15-50-s3-oo-cs2-cg2-gs-av , part no.1000. , flat gasket - graphite for johnson pump make, type tgh-15-50- s3-oo-cs2-cg2-gs-av , part no. 1020. , plug - stainless steel a4 r for johnson pump make, type tgh-15-50-s3-oo-cs2- cg2-gs-av, part no. 1030. , flat gasket - graphite for johnson pump make, type tgh-15-50-s3-oo-cs2-cg2-gs-av, part no. 1090. , flat gasket - graphite for johnson pump make, type tgh-15-50-s3-oo-cs2-cg2-gs-av, part no.1100. , ball bearing cover cast iron de side for johnson pump make, type tgh-15-50-s3-oo-cs2-cg2-gs-av, part no. 1430. , ball bearing cover - cast iron nde side for johnson pump make type tgh-15-50-s3-oo-cs2-cg2-gs-av, part no. 1470. , safety relief valve for johnson pump make, type tgh-15-50- s3-oo-cs2-cg2-gs-av, part no. 7010. , cover for johnson pump make, type tgh-15-50-s3-oo-cs2-cg2-gs-av, part no. 7050. , valve seat for johnson pump make, type tgh-15- 50-s3-oo-cs2-cg2-gs-av, part no. 7110. , spring - steel for johnson pump make, type tgh-15-50-s3-oo-cs2-cg2-gs- av, part no. 7150. , wear ring for johnson make pump, type cc 40 315 r6 m2 l2, part no.130 , gasket for johnson make pump, type cc 40 315 r6 m2 l2, part no.300 , pump shaft for johnson make pump, type cc 40 315 r6 m2 l2, part no.2200 , coupling key for johnson make pump, type cc 40 315 r6 m2 l2, part no.2210 , splash ring for johnson make pump, type cc 40 315 r6 m2 l2, part no.2220 , inner circlip for johnson make pump, type cc 40 315 r6 m2 l2, part no.2300 , nilos ring de side for johnson make pump, type cc 40 315 r6 m2 l2, part no.2310 , nilos ring de side for johnson make pump, type cc 40 315 r6 m2 l2, part no.2320 , shaft nut for johnson make pump, type cc 40 315 r6 m2 l2, part no.2560 , locking ring for johnson make pump, type cc 40 315 r6 m2 l2, part no.2570 , cap nut for johnson make pump, type cc 40 315 r6 m2 l2, part no.1820 , impeller key for johnson make pump, type cc 40 315 r6 m2 l2, part no.1860 , impeller, for johnson pump make, type cn 32 160 ng1 m1 l1, part no.120 , pump shaft, for johnson pump make, type cn 32 160 ng1 m1 l1, part no. 2200 , splash ring, for johnson pump make, type cn 32 160 ng1 m1 l1, part no. 2220 , inner circlip, for johnson pump make, type cn 32 160 ng1 m1 l1, part no. 2300 , adjustment ring, for johnson pump make, type cn 32 160 ng1 m1 l1, part no. 2340 , shaft sleeve, for johnson pump make, type cn 32 160 ng1 m1 l1, part no. 1200 , impeller nut, for johnson pump make, type cn 32 160 ng1 m1 l1, part no. 1820 , impeller key, for johnson pump make, type cn 32 160 ng1 m1 l1, part no. 1860

State Government

CTN :45343214

04 Jun, 2026 56.93 Lacs

Daman - Gujarat

Tender For providing and supplying of auxiliary items for old collectorate, daman - civil works others, providing and fixing 25mm thick commercial grade plywood on ms structural framework, including fabrication and erection of necessary m.s. square/rectangular pipe structure, cutting, welding, grinding, primer painting, fixing of plywood with suitable screws, nuts, bolts and approved hardware fittings, complete with all labour, materials, tools & tackles, transportation, loading/unloading, scaffolding and finishing work as directed by the engineer-in-charge., providing and fixing 15mm thick engineered solid wood flooring of approved make such as mikasa or equivalent, comprising top uv coated wooden wear layer bonded on plywood base, in approved shade and pattern, including surface preparation, underlay wherever required, adhesive fixing, cutting, edge finishing, skirting/joint treatment, complete installation with all necessary accessories, labour, tools & tackles, transportation, loading/unloading and finishing work as directed by the engineer-in-charge., providing and fixing 15mm thick engineered solid wood flooring skirting and t-patti work in approved shade and finish, including 75mm / 50mm size matching wooden skirting, plywood base/patti as required, fixing with suitable adhesive, nails and hardware accessories, cutting, edge finishing, polishing and complete installation with all labour, materials, tools & tackles, transportation, loading/unloading and finishing work, complete as directed by the engineer-in-charge., providing and fixing 3mm thick underlay foam sheet below wooden flooring, of approved quality and make, including surface cleaning and preparation, laying with proper alignment and jointing as per manufacturer specifications, complete with all labour, materials, tools & tackles, transportation, loading/unloading and necessary finishing work, as directed by the engineer-in-charge., labour charges for laying and fixing wooden flooring, including application of approved adhesive/glue and liquid compound, proper cutting, fitting, alignment and finishing of flooring boards/tiles, complete with necessary labour, tools & tackles, handling, cleaning and all incidental works required for proper installation, as directed by the engineer-in-charge., providing and fixing gypsum board partition/wall panelling above bathroom wall area, using approved quality moisture resistant gypsum board fixed on g.i. framework with necessary channels, studs, screws and jointing compound, including cutting, finishing, taping of joints, surface preparation and complete installation with all labour, materials, tools & tackles, scaffolding, transportation, loading/unloading and finishing work, as directed by the engineer-in-charge., providing and fixing room carpet of approved quality, design, colour and make, suitable for indoor flooring application, including necessary underlay wherever required, cutting to required size, transportation, loading/unloading and all incidental charges, complete as directed by the engineer-in-charge., providing, testing & commissioning 40 litre capacity solid door thermo-electric mini bar/refrigerator of approved make and model, suitable for hotel/office/residential use, complete with adjustable shelves, temperature control system and all standard accessories, including transportation, loading/unloading, placement at site and testing & commissioning, complete as directed by the engineer-in-charge., providing and fixing hotel safety locker/safe of size 200 x 420 x 370 mm, black colour, with electronic digital locking system, suitable for hotel/office/residential use, complete with mounting accessories and standard fittings (battery not included), including transportation, loading/unloading, installation and testing, complete as directed by the engineer-in-charge., providing testing & commissioning double layer electric kettle, black colour, of approved make and capacity, with stainles

Central Government/Public Sector

CTN :45351002

08 Jun, 2026 1.89 Lacs

South Andaman - Andaman And Nicobar Islands

Tender For supply of naval store items : : - tube light , lamp led , cable electric , rj 45 cable , desoldering wire , soldering flux , wire connecting lugs , solder lead , battery connecting lugs , tape insulation , lip seal , gloves , oil and grease remover , fevicol , baniyan cloth , linseen oil boiled , hacksaw blade , grease , funnel , soap , paint brush , thinner , poly vinyl acetate , poythene bag , poythene bag 14x18x75 , petroleum jelly , paint roller , face mask , wiper soft rubber , twine flex , tray paint roller , tape measuring , chipping goggle , chain , call boatswain , turpentine oil , super mop , automatic air freshener , paint roller refill , aluminum telescopic baton

Central Government/Public Sector

CTN :45355712

05 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of pway scrap - scrap rails 52 kg. above 01 mtr. long (02 stacks) remarks - kachcha approach road is available the lot. no wear and tear has provided for any scrap rails. delivery will be made on sectional weight per meter basis only. quantity is physically available. delivery will be made during dry seasons. lot no. has been painted on the lot. actual measurement painted on each rail in meter. cutting of rail above 6 meters is allowed for easy transportation. the quantity as per ss-11 has been amended to 63.091 mts. from 63.092 mts. and repair and maintenance to 1213.28 from 1213.30 sse (p-way) pen will make necessary corrections in quantity on udm. the stockholder is fully responsible for any alteration, addition or deletion in the lot after joint inspection. dunnages of stack are included in the lot. fish plates/joggle fish plates/glued joints and other fittings/joints are to be returned to the stockholder because it is not included in the lot. purchaser is strictly advised to personally visit the site from the point of delivery/loading of rails before bidding. no claim will be entertained after sale of lot. the purchaser shall be responsible for any negligence and safety of his labour and other staff in railway premises during the process of cutting and loading of rails. only measured rails mentioned in ss-11 and ds8 note qty/r/m should be delivered. location - km - 106/2 - 3 dn & 106/6 - 7 & ohe - 106/10 - 12 & 106/28 - 30. qty - 63.091 mts. approx. stock holder - sse (p.way) pen. (original lot no. 014771-25-00009.)

Central Government/Public Sector

CTN :45355713

05 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of pway scrap - scrap rails 52 kg. above 01 mtr. long (02 stacks) remarks - kachcha approach road is available the lot. no wear and tear has provided for any scrap rails. delivery will be made on sectional weight per meter basis only. quantity is physically available. delivery will be made during dry seasons. lot no. has been painted on the lot. actual measurement painted on each rail in meter. cutting of rail above 6 meters is allowed for easy transportation. the quantity as per ss-11 has been amended to 25.727 mts. from 24.808 mts. and repair and maintenance to 494.75 from 477.07 sse (p-way) pen will make necessary corrections in quantity on udm. the stockholder is fully responsible for any alteration, addition or deletion in the lot after joint inspection. dunnages of stack are included in the lot. fish plates/joggle fish plates/glued joints and other fittings/joints are to be returned to the stockholder because it is not included in the lot. purchaser is strictly advised to personally visit the site from the point of delivery/loading of rails before bidding. no claim will be entertained after sale of lot. the purchaser shall be responsible for any negligence and safety of his labour and other staff in railway premises during the process of cutting and loading of rails. only measured rails mentioned in ss-11 and ds8 note qty/r/m should be delivered. location - ohe - km 127/9 - 15. qty - 25.727 mts. approx. stock holder - sse (p.way) pen. (original lot no. 014771-25-00017.)

corporations/Associations/Others

CTN :44856671

29 May, 2026 NA

Hyderabad-T - Telangana

Tender For bid to ras supply of consumables as per annexure-f - paint brush, paint brush, paint brush, hose pipe pvc braided, hose pipe clamp ajdustable-55, foam gasket with adhesive 1 inch, foam gasket with adhesive 2 inch, velcro black, velcro black, araldite standard epoxy adhesive, fevikwik, fevicol sr 998 synthetic, rubber adhesive, hinges, pu adhesive sealant pu 540, paint remover, knifing metal paste, rust remover, face sheild, face sheild, apron leather, apron, earplugs, safety googles industrial., safety helmets, spray gun pilot type-595, spray gun pilot type p-80, hand gloves leather, hand gloves cotton, hand gloves nitrile palm, coated, hand gloves nitrile, nose masks yellow, mask welding respirator, mask painting respirator, welding rods ms 6013, welding rods ms 6013, welding rods ms 6013, locktite high strength, emry paper, measuring tapes, measuring tapes, wire brush welding, pu tube for pneumatic pipe, blue, pneumatic adapter 2-1 way -, pu tube 8mm, paper tape, paper tape, protective work wear, (dungree)

CTN :45325588

09 Jun, 2026 40

Multi City - Karnataka

Tender For procurement of cleaning materials for huskuru gp for the year 2026-27 - coco broom with 5 feet length only natural product to sweep the outdoor only, garbage cover small size, metal type big web stick16 to 24 feet length, small web stick 8 feet, metal dust pan, plastic dust pan, water jug normal size, plastic bucket, system herbicide glyphosate 41% sl, ammonium salt of glyphosate 71 % sg powder, grass cutter or weed cutter 4 stroke engine honda or other brand made company only 1 year motor warranty only without spares running petrol only, grass cutter or weed cutter 2 stroke engine with weed cutter 250meter wire 2sets of blades 1 year service warranty period without spares only china make only no brand petrol and oil running, with push cart set and 3phase honda motor and pump 100 meter flexible hose cable 2no spray guns 250 ltr capacity tank 1 year warranty for motor out of service is free up to 1year spare are chargeable, battery & manual sprayer to wear the back side 16ltr capacity tank no warrant for battery only service warranty 6months without spares only , giantbigfogging machine 1.9 ltr consumption ltr per hr chemical tank 5ltr capacity hand pump 3 to 4 time then cahrgeble battery running 1 year service warranty only with spares and labour charge are extra. to diesel and petrol running only, mini small fogging machine to spray for mesquites no warranty product to use diesel and mini gas can, the composition of malathion tech 5.0% based on 95% chain clay 10% soapstone, toilet cake or odonil fragrance of wash room purpose only, bamboo ladder, mop small cloth to use office table and chairs cleaning purpose only, clip mop set it use moping purpose to office only, apron, sodium hypo chloride, weed control chemical, mask branded, gum boots branded, pvc hand gloves 16 inches, coco broom, soft broom, toilet cleaning acid, malathion oil 5.0% e.c, pesticide (fogging chemical with water mix), fogging chemical (with fuel mix), black phenyl, white scented phenyl, alum crystal, malathion dust 5.0%e.c, bleaching powder 33% chlorine, safety helmets, sanitizer

Central Government/Public Sector

CTN :45313291

01 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of others - scrap miscellaneousellaneousellaneous items ferrous (1)lot no-1802202605, miscellaneousellaneousellaneousscrap line (hand wheeel, operating handle, cbr rod, control rod, angle cock, floor channel, flooting lever, flooting lever pin, striker casting wear plate, gear box, assembly, epr, push rod, short pul rod, mpr, bk shoe key, connector, bg piece safety, bkt packing piece, bk shoe knukle pin, horn check, pu rod cap., nut, bolt, spring etc.),30.00mt,location-near old dry office left side of pathway (2)lot no-1802202606, miscellaneousellaneousellaneousscrap line (hand wheeel, operating handle, cbr rod, control rod, angle cock, floor channel, flooting lever, flooting lever pin, striker casting wear plate, gear box, assembly, epr, push rod, short pul rod, mpr, bk shoe key, connector, bg piece safety, bkt packing piece, bk shoe knukle pin, horn check, pu rod cap., nut, bolt, spring etc.),20.00mt,location- near old dry office right side of pathway

Central Government/Public Sector

CTN :45326075

05 Jun, 2026 NA

Kota - Rajasthan

Tender For auction sale of depot ferrous scrap - 98050126 scrap ferrous material consisting of various type of nut, bolt, rivets, peices of angle, channel, m.s. bracket, draft gear spring washer,m.s. liners,piston, door hinge, door hinge foot, small cut peices of tie bar, beater, clamp, pully side bearer housing, brake wear plate,side bearer housing top and bottom, knuckle pin, knuckle thrower, dog spike, g.i. ohe fitting, bk hanger lever, fish bolt, parts of ctrb bearing, liner, small p.way fittings, bk shoe key, s/pin, pu pad, axle box cover, and inner outer rings, m.s. pins, s/plate, peices of s.s and m.s. pipe, peices of huck bolt fresh cutting, push rod, cbc uncoupling rod, cbc lock and cbc components, safety loop, bk shoe head, released valve, cut peices of m s sheet, plates, buckles, ohe fitting, peices of ms rounds, equalizing lever, bridle bar, shackle stone, shackle, stricker casting wear plate, yoke pin, side bearer liner plate, hand brake wheel, suspension socker, g.i. nut bolt, tension device, main pull rod, cbc uncoupling rod, yoke pin, c.c. pad plate, m.s. round, bk shoe head, bk beam plate, reservoir tank patti, door catch, door check spring, annual repair supporting bracket, signal ground connection parts and other small wagon components and other ferrous items if any.

Chipping Goggle Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors