Get complete information related to latest Chockfast Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Chockfast Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Chockfast Tenders.
Tender For maintenance of nh-22 (new nh 05) from km 13/00 to 24/250 and 153/180 to 156/507 on kalka-shimla wangtoo road (sh: cutting of grass and bushes, prov.& applying white washing, clearance of chowked drains,, finishing with epoxy paint between rd 18/00 to 19/00)
Tender For supply of enamel, synthetic, exterior (a) undercoating (b) finishing (v4) confirming to is 2932 (q3) , ready mixed paint, air drying, red oxide zinc chrome, priming (v2) as per is 2074 (q3) , thinner for epoxy paints (bhel) (q3)
Tender For chemical & thermal resistant epoxy enamel dark grey paint shade no. 632 of is: 5 to cps-aa 56131/ rev. , epoxide finishing paint light grey. with catalist shade 631 as per cps-aa56131/rev. 07 in 4 ltr. pack , epoxide priming paints as per cps- aa56105/rev. 07 in 15+ 5 ltr. packing.
Tender For mp-lads-angamaly bp-mp lads 2024-25 honble mp sr. p.p.suneer ( rajyasabha) construction of open gym and installation of equipment at chakkala pongam area of ward -13, thuravoor grama panchayat (infrastructure & purchasc) ernakulam district-general civil work - platform for open gym, 2.32:clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared., 2.8.1:earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.all kinds of soil, 4.1.8:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources), 4.3.1:centering and shuttering including strutting, propping etc. and removal of form work for:foundations, footings, bases for columns, 4.1.3:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-iii)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources), od228316/2023-2024:construction of granular sub-base by providing local material, spreading in uniform layers on prepared surface and compacting by ramming to achieve the desired density complete i) using gravel mix/quarry muck, od223449/2023-2024:providing and laying factory made chamfered edge cement concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength,thickness & size/ shape, made by table vibratory method using pu mould, laid in required colour & pattern over 50mm thick compacted bed of stone aggregate, compacting and proper embedding/laying of inter locking paver blocks into the stone aggregate bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of engineer-in-charge.60mm thick cement concrete paver block of m-35 grade with approved colour, design & pattern. modified spec. 16.91.1, od134330/2025-2026:providing and fixing gi pipe hand rail of approved size by welding and all labour charges etc., 5.23:smooth finishing of the exposed surface of rcc work with 6mm thick cement mortar 1:3 ( cement : 3 fine sand)., 13.52.2:finishing with epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete.on concrete work, 13.52.1:finishing with epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete.on steel work, od133367/2025-2026:supplying and fixing white stone bench with back rest,2 seater, od139386/2025-2026:providing and laying of interlocking concrete block pavements using80 mm m 40 interlocking paver blocks made by strong vibratory compaction of approvedsize,design @ shape ,laid in required pattern over and including a compacted bed of 6 mm stoneaggregate of 50 mm average thickness etc all complete as per the direction of engineer incharge., od234555/2023-2024:supplying and fixing in place granite name board of slab area less than 0.9sqm includingengraving and painting letters etc complete as per direction of engineer in charge at sitedar spec
Tender For bid to ras corrigendum : supply of thinner f/enamel paint , two pack aliphatic acrylic polyurethane finish paint off white , zinc ethyl silicate primer is 14946: 2001 , two pack epoxy polyamide mio undercoat , enamel, synthetic, exterior (a) undercoating (b) finishing (v4) confirming to is 2932 , ready mixed paint, air drying, red oxide - zinc phosphate, priming as per is 12744
Tender For corrigendum : work of name :- remaining work pkg. no. rj-23-10/srf (rr) / np / 2022-23 distt kota - providing, laying and spreading and compacting specified graded crushed stone in sub-base course including premixing the material at omc in mechanical mixer (pug mill), carriage of mixed material, laying in uniform layers with motor grader, f.e. loader, on a prepared surface and compacting with vibratory compactor to achieve the desired density including all material, labour, machinery, lighting barricading and maintenance of driversion complete. (morth specification clause 401). with all lead & lift, fdkuiqjk rfd;k ls punzsly, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc ordinary kilometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc hectometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and erecting typical citizens information board as per approved drawing & specification of mord, made of two ms sheet of 1.6 mm thick each of size 900 mm 750 mm stiffened by angle iron 25 mm 25 mm 3 mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 swg sheet (vertical post 3050 m with angle holdfasts and horizontal member 900 mm) to be joined by 5 mm thick ms plate at 12 places (65 50 mm) duly embedded in cement concrete m-15 grade of block of 600 mm 600 mm 750 mm size below ground level as per enclosed drawings & as directed by engineering - in-charge. all ms will be stove enameled on both side, lettering, figuring and border will be with ready mixed synthetic enamel paint of superior quality in required shade and colour etc. complete in all respect. all sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per mord specification., fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and laying reinforced cement concrete pipes np-3 for culverts including jointing ends and fixing collar with cement mortar 1:2. (morth specification : clause 1000/2900). 300 mm dia, fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, dry lean cement concrete sub - base. construction of dry lean cement concrete 1:3:6 sub-base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blening to be as per table 600-1, cement content not to be less than 200 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonne vibratory roller, finishing and curing., fdkuiqjk rfd;k ls punzsly, total, providing and laying un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base with 43 grade cement, coarse and fine aggregate conforming to is:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or fix form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures and vacuum processing pump as approved, curing compound, finishing to lines and grades as per drawing as per morth specification : clause no. 602, 112. using cement concrete m-30 pavement grade, fdkuiqjk rfd;k ls punzsly, total, earthwork in excavation for foundation of structure complete with all l
Tender For tender for supply of paint finishing ral 9011 black , anti corrosive paint water compensated diesel oil tank , anti corrosive paint avgas avcat , pain traffic top coat dark amercoat grey , primer above water exterior for aluminium substrate , paint finishing ral 7040 grey , paint polyurethane grey , paint polyurethane red , paint non slip epoxy d a grey with hardner
Tender For one panchayath one playground- development of ezhikkara grama panchayath ground in paravur lac, ernakulam district- supply and installation of open gym equipment - retender - inauguration stone and interlock laying for open gym area, od34726/2026-2027 providing and fixing 18 mm thick gang saw cut, mirror polished, pre-moulded and pre polished, machine cut for inauguration granite stone of required size, approved shade, colour and texture laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) joint treated with white cement, mixed with matching pigment, epoxy touchups including rubbing, curing etc. complete at all levels. area of slab over 0.50 sqm, 16.21 engraving letters in hard stone, od419846/2025-2026 providing and laying of interlock concrete block pavements having thickness 60mm (m35) as per drawings and technical specification clause 1504 confirming to is 15658 and laid in required colour and pattern over and including 50mm thick compacted bed of 6 mm metal including edge concreting for 300mm width and 150mm depth with cc m35( @ 0.045 m3/m), supply and installation of open gym equipment, od27550/2026-2027 chest press (double) - supply and installation of double chest press having the following specifications: dimensions: (l x w x h) 1955 x 710 x 1900 mm. main center pipe - ø 114 mm od ?b? class gi pipe. foundation plate ?m.s. round plate of ø 250mm & 8 mm thick. foundations cover cap- dome shape of pp / nylon / hdpe material. remaining frame - made up of ø 48 mm od ?b? class g.i. pipe. handle - made up of ø48mm od ?b? class g.i. pipe. link - made up of ø 48 mm od ?b? class g.i. pipe. seat & back rest ? 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. bearing bush closing cap?s? pp / nylon / hdpe material. handle must be connected with frame by 8 mm laser cutting ms profile. top closing cap ? dome shape made by pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brands. pin ? made up of ø 25 mm m.s. bright bar pin. bearing bushes - ø 60 mm od seamless pipe. grips - high quality rubber ø 46 mm od. circlips?a 24 circlips are used for assembly. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od30940/2026-2027 surfboard - dimensions: (l x w x h) 1090 x 890 x 1390 mm. main frame made from two pipes of ø 114 mm od b class gi pipe. foundation plate m.s. round plate of ø 250 mm & 8 mm thick. connecting pipe - ø 88 mm od b class gi pipe is used to connect both main frame pipes at top end and ø 42 mm pipe is used to connect at bottom end. handle - ø 42 mm and ø 33 mm od b class gi pipe. support pipe ø 60 mm must be used to support leg movement frame. leg movement frame ø 42mm od b class gi pipe. footrest - cast iron 325 x 270 x 8 mm thick and m.s. plate of 250 x 200 x 2 mm thick use for to support it. bracket - 8mm thick laser profile is used to support leg movement frame. top closing cap dome shape made by pp / nylon / hdpe material. closing caps pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. grips - high quality