Latest choke repair Tenders | Government choke repair Tenders

Central Government And Public Sector

CTN :45423220

12 Jun, 2026 NA

Katihar - Bihar

Tender For supply, design, installation, testing and commissioning of multi section digital axle counter (msdac) complete system as per rdso specification no rdso/spn/176/2013 version 3 or latest and as per technical specification suitable for provision of axle counter with existing dc track circuit. tenderer shall design the scheme for provision of required number of evaluators, detection points and track clearance relaysetc. to be submitted as certified by oem. msdac should have facility to reset track sections. this shall also include necessary power supply arrangement, proper and recommended earthing as well as surge and lightening protection arrangement for working of the system. (unit- nos means per dp) special condition attached with annexure- a (used in kdpr yard) [ warranty period: 30 months after the date of delivery ] ]

CTN :45404035

03 Jul, 2026 11.78 Lacs

Gwalior - Madhya Pradesh

Tender For supply of fan, exhaust fan and other materials. file no.53/26x6/4. - supplying,erection and testing o approved make electric ceiling fan of double ball bearing complete with standard downrod , canopy,hanging shackle,aluminium blades, without regulator, a.c.230-250 volts including connections with all necessary material complete as required confirming to is :374/1979 with upto date ammendments. ceiling fan (energy saver 50 w)-1200 mm sweep, supplying,erection and testing of approved make freshairfan ac230-250 volts with connection and including framebolt/anchor hole fasteners etc.compelte finished and as required.225mm sweep, supplying,erection and testing of approved make freshairfan ac230-250 volts with connection and including frame bolt/anchor hole fasteners etc.compelte finished and as required.300mm sweep300 mm sweep, supplying,erecting and testing of approved make exhaust fan heavy duty with mounting frame,blades ac230-250 complete connection and including, frame bolt/ anchor hole fastners etc. complete finished and as required.450mm sweep 900 rpm, supplying and drawing single core pvc insulated cable frls withcopper multi strand conductor isi marked in existing rigid pvccasing and capping/conduit in surface or concealed as perspecification. 1.5 sq. mm. wire 1 x 1.5 sq. mm. (1 coil = 90 mtrs) 19 rs/mtr., supplying and drawing single core pvc insulated cable frls withcopper multi strand conductor isi marked in existing rigid pvccasing and capping/conduit in surface or concealed as perspecification. 1.5 sq. mm. wire 1 x 2.5 sq. mm. (1 coil = 90 mtrs) 30 rs./mtr, supplying and drawing single core pvc insulated cable frls withcopper multi strand conductor isi marked in existing rigid pvccasing and capping/conduit in surface or concealed as perspecification. 1.5 sq. mm. wire1 x 4.00 sq. mm. (1 coil = 90 mtrs) 45 rs/mtr., supplying and drawing single core pvc insulated cable frls withcopper multi strand conductor isi marked in existing rigid pvccasing and capping/conduit in surface or concealed as perspecification. 1.5 sq. mm. wire 1 x 6.00 sq. mm. (1 coil = 90 mtrs) 68 rs/mtr., supplying and testing of approved make pedestal fana.c.230-250volts with blades speed regulatorpedestal etc duly wired with all necessary material complete as required 400 mm sweep, supply and fixing led tube rod comprising of led tube with non-integral/ integral driver, upto 6500k color temp having 40000 burning hrs life with minimum @ l 70, system lumen output should be minimum with system efficacy> 100 lm/watt. led driver pf> 0.95 & thd 20%. the colour rendering index of led light should be more than 70. submission lm 79 08/is16106 (2012), iec60598, iec61347i/c connection wire, testing etc. to complete the job. tube light led 1 x 20/22watt, integral i/c batten aluminium body, pc diffuser., supply and fixing of surface mounting type led light fixture, led of 1 to 3 watt each assembled on single mcpcb, having color temp upto 6500k & having 50000 burning hrs. life with minimum @ l 70, system lumen output should be minimum withefficacy>100 lm/watt. led driver, pf> 0.95, thd 20% & surge protection 4kv. the colour rendering index ofled light should be more than 70. housing made of crca powder coated frame with glare free diffused polycarbonate cover. submission led luminiare 2 x 2, 45watt, color temp 3000-6500k as required.

CTN :44962786

10 Jun, 2026 NA

Dehradune - Uttarakhand

Tender For expression of interest document for pre bid selection of consortium partner for procurement of ict equipment along with supply installation for seoc at usdma building it park dehradun - core network switches , supply installation testing commissioning of core switch as per technical specifications and corrigendum updates/clarifications , supply installation testing commissioning of sfp+ module for 10g , access network switches - (for poe & non- poe devices) , "supply, installation, testing & commissioning of access switch 48 port non- poe, as pertechnical specifications and corrigendum updates/clarifications" , "supply, installation, testing & commissioning of access switch 48 port poe+ as pertechnical specifications and corrigendum updates/clarifications" , wireless networking , "supply, installation, testing & commissioning of virtual wireless controller (software)as per technical specifications and corrigendum updates/clarifications" , "supply, installation, testing & commissioning of wireless indoor access point as pertechnical specifications and corrigendum updates/clarifications" , "supply, installation, testing & commissioning of wireless outdoor access point as pertechnical specifications and corrigendum updates/clarifications" , wireless networking , ip telephony appliance based system (minimum 500 end-user lic support including ip phones, video phones and sip h.323 based video conferencing devices. hardware, software and voice gateways shall be from same oem for better interoperability), and will also include 1 pc based console for operator) , supply, installation, testing & commissioning of helpdesk operator wired headsets , "supply, installation, testing & commissioning of fusion room operator wireless hands- free headsets forsoftphone working" , "supply, installation, testing & commissioning of unified communication (uc) system with softphone support and250 user licenses" , supply, installation, testing & commissioning of basic type-i sip phones features a color display, 3 context-sensitive soft keys, and fixed function/navigation buttons. , supply, installation, testing & commissioning of vip (premium) sip telephone with 7- inch or larger color touch screen with a 2mp or 1080p hd camera, supporting one or more sip accounts and 3-way conferencing. features hard function keys for essential call controls and a secondary gigabit ethernet port for desktop/laptop connectivity , supply, installation, testing & commissioning of pc based console for operator , router , "supply, installation, testing & commissioning of standalone / modular router, as pertechnical specifications and corrigendum updates/clarifications with 5 year support." , firewall , "supply, installation, testing & commissioning of utm firewall as per technical specifications and corrigendum updates/clarifications. shall have 32 gb or higher ram and 800 gb nvme ssd storage and wil provide 5 gbps firewall throughput, 3 gbpsipsec throughput, 5 gbps ips throughput or more and 5 gbps nextgen firewall throughput including firewall" , dns security , "supply, installation, testing & commissioning of dns security solution for minimum 150users" , active power factor filter (apff/ahf) , "supply, installation, testing & commissioning of active power factor filter with ct kit(150 a)" , ems , supply, installation, testing & commissioning of element management systems. , nac , nac (appliance + 100 licenses) in ha , hci servers , supply installation testing commissioning of 4 hci nodes for dc across 1 clusters , supply installation testing commissioning of 4 hci nodes for dr across 1 clusters , microprocessor based transient voltage surge suppression (tvss) system with reset facility high/low voltage protection , "supply, installation, testing & commissioning of microprocessor based transientvoltage surge suppression (tvss) system with reset facility high/low voltage protection" , rodent repellent s

CTN :45373081

08 Jun, 2026 39.89 Lacs

Multi City - Telangana

Tender For procurement and supply of street lights and spare parts in adilabad municipality, est.cost rs.48.00 lakhs, 15th fc untied grant- elecrtical insulating tape of 10 mtrs , glass and deffuser (excluding gst) of 18w , glass and deffuser (excluding gst) of 70 w , supply and delivery of pcb (excluding gst) of 110 w , supply and delivery of pcb (excluding gst) of 18w , supply and delivery of pcb (excluding gst) of 35 w , supply and delivery of pcb (excluding gst) of 70 w , supply and fixing of automatic street light control system based on daywise users settable mode of astronomical timer or digital timer with optical micro sensor, low voltage / high voltage trip and reset, operating voltage 380 - 480v ac, 50 hz and shall withstand surge level of 8 kv. the electronic controller with ip 65 protection and suitable smc / pc enclousure with ip 54 protection, mcbs of legrand / schneider / lk / siemens / bch of 10ka c curve and contactor suitable to control the load ---------- three phase load with necessary of 12 kw , supply and transportation of .......... corrosion resistant powder coat, having protective toughened glass cover / temperature protective custom molded polycarbonate diffuser, thermal shock and impact resistant ik07 fixed to the housing by ss screws suitable lense on leds, less glare, ip 66 (silicon gasket ensures optical & electrical compartments are ip 66) protected, wide operating voltage range, p.f > 0.90, system having efficacy >120 lumens / watt,with ingress protection ip66, bis approved potted driver, driver surge protection >10kv, thd<15%, cct: 3000- 6500k as desired by the department and as per is, cri>70, inbuilt electrical protections like over voltage, short circuit, over load, open circuit, miswiring, etc complete with bis certification with 5 years warranty. the contractor has to furnish the manufacturer warranty letter, lm 79 and lm 80 certificates. luminaire make : philips / osram / crompton / bajaj / surya / ecolink / wipro / jaquar / eveready / halonix / keselec / havells / polycab / surya / capart / fortune arrt / goldwyn / panasonic / gm / goldmedal / silicon / orient / hpl / valmont / transrail / bee - lite / accent led make : philips lumileds / cree /nichia / osram / samsung / lg leds. of 30 w +/- 10% (> =3000 lumens) , supply and transportation of .......... corrosion resistant powder coat, having protective toughened glass cover / temperature protective custom molded polycarbonate diffuser, thermal shock and impact resistant ik07 fixed to the housing by ss screws suitable lense on leds, less glare, ip 66 (silicon gasket ensures optical & electrical compartments are ip 66) protected, wide operating voltage range, p.f > 0.90, system having efficacy >120 lumens / watt,with ingress protection ip66, bis approved potted driver, driver surge protection >10kv, thd<15%, cct: 3000- 6500k as desired by the department and as per is, cri>70, inbuilt electrical protections like over voltage, short circuit, over load, open circuit, miswiring, etc complete with bis certification with 5 years warranty. the contractor has to furnish the manufacturer warranty letter, lm 79 and lm 80 certificates. luminaire make : philips / osram / crompton / bajaj / surya / ecolink / wipro / jaquar / eveready / halonix / keselec / havells / polycab / surya / capart / fortune arrt / goldwyn / panasonic / gm / goldmedal / silicon / orient / hpl / valmont / transrail / bee - lite / accent led make : philips lumileds / cree /nichia / osram / samsung / lg leds. of 20 w +/- 10% (> =2000 lumens) , supply and transportation of led driver with input line voltage 120v-270v ac, 50hz with surge protection more than 2.5 kv, ip20, suitable for............... led down lighter. makes : philips / osram / ge /crompton / bajaj / keselec / halonix / havells / hpl / surya / syska / jaquar/ arraystorm / gm / goldmedal / pro-lite / secs of drivers 70 w , supply and transportation of led driver with input line voltage 120v-270v ac, 50hz with surge prote

CTN :45048307

30 Jun, 2026 NA

Tarapur - Maharashtra

Tender For corrigendum : : supply, installation, testing & commissioning of electrical equipment for dg block 119a of inrp - ht panels (119a)supply, installation, testing & commissioning of indoor type floor mounted, single front, metal clad, 1250 a, 6.6 kv, 3 phase, 3 wire, vcb switchgear panel suitable for a short circuit current of 31.5 ka for 3 seconds, internally arc tested for 31.5 ka for 1 second, comprising of following incoming & outgoing feeders : incoming feeder: 1 no. 1250 a, 3p vcb outgoing feeders: i) 7 nos. 630 a, 3p vcbii) 1 no. 1250 a, 3p vcb as tie feederwith surge arrestors, relays, pts, cts & other necessary accessories including associated structural steel required for complete installation of the panel & equipment earthing of the panel from both the earthing terminals of the panel to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings. reference drg. nos: ip1/119a/05027339/dwg/001/r0 & ip1/119a/05027339/dwg/002/r0(note: terminal box of each incomer of 6.6kv switchboard shall be suitable for terminating 4x3cx400 sq.mm., 6.35/11kv (e), a2xwy cables.), supply of spares for ht panels as per attached spares list mentiond in section c, part ii of tender, 2.5 mva, 6.6/0.433 kv dry type transformers (119a)supply, installation, testing & commissioning of 6.6/0.433 kv, 2.5 mva, dyn11 dry type cast resin transformer having percentage impedance of 8.5% complete with ht cable end box, lt bus duct flange, off load tap changer on ht side with range of +/-5% in steps of 2.5%, wti scanner, ct for restricted earth fault protection and other necessary accessories including associated structural steel required for complete installation of the transformer & equipment & neutral earthing of the transformer from both the earthing terminals of the transformer to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings.reference drg. no. : ip1/119a/05034347/dwg/001/r0, supply of spares for dry type transformers as per attached spares list mentiond in section c, part ii of tender, 2000 kva diesel generator sets (119a)supply, installation, testing & commissioning of 3 phase 2000 kva prime power 433v, 50hz, 0.8 p.f. diesel-generator sets with 110% overload capacity for 1 hr with four (4) stroke inline or vee type cylinder arrangement having engine speed 1500 rpm, 24v electric battery starting system with a provision of interchangeability of battery bank between two dg sets, complete with all auxiliary equipment including amf control panel, auxiliary mcc panels, heat exchanger cooling system, raw water pump, remote radiator with fans on terrace, ms exhaust piping, exhaust structure (maximum 30 m stack), 4 nos. of 3.6 cubic metre fuel day tank outside dg building (for all 4 dg sets) & 1 no. of 990 ltr intermittent tank inside each dg room, ms "c" class fuel piping between engine & fuel tank, dg room accoustic treatment & complete ventilation of dg room, brushless excitation for alternator, one no. 3200 amp 415 v 4p acb, ms structural steel supports/ channels/ angles & other necessary accessories including associated structural steel required for complete installation of the dg & equipment & neutral earthing of the dg from both the earthing terminals of the dg to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & necessary statutory clearances from cpcb etc. as required and as per tender technical specifications & drawings. design and construction of foundation for exhaust pipe rack/ structure of dg set is included in the scope of the contractor.reference drg. nos. : i) ip1/119a/05034347/dwg/001/r0ii) ip1/119a/05044831/dwg/003/r0iii) ip1/119a/05044831/dwg/004/r0iv) ip1/119a/05044831/dwg/005/r0v) ip1/119a/05044831/dwg/006/r0, supply of sp

Central Government And Public Sector

CTN :45406504

08 Jun, 2026 NA

Lumding - Assam

Tender For supply of flood light led 50w input voltage range 145v-270v with cut off below 120v, 50 hz, ip66 , conforming to is 104322 part 5/section 5/ 2012 & is: 16107 (part 2/sec 1 2012, photobological safety of leds as per is 16108/2012, type b led luminaire as per is 16107 (part 2/sec 1) type 3 led module as per is 16103 part-2/2012, efficacy>100lm per watt, pf>0.95, driver efficacy>85, thd<10, led chip efficacy>130 lm/watt color temperature 6000k, cri>70, beam angle>120, heat sink-aluminium die cast with syfficient fins ti dissiple heat junction temperature<85 degree centigrade , operating temperature- 20 degree c to 50 degree c, 10% to 95% rh. all protection like - short circuit protection, over load protection , over voltage protection, reverse polarity , ir>100m ohm, protection against surge and transients>5kv internal and >10kv for external.the luminaire casing shall be die casted aluminium alloy with higher thermal conductivity corrossion, resistance epoxy powder coated , stainless steel fastner, led make osram/ nichia/ cre/philips/syska/samsung with lm 79, emi/emc compliance system lm 80 & tm 21 reports from accredited labnabi/ilac, dc/ac controlled gear as per is:15885(part2/section 1) 2012, bis safety for led luminaire as per is:10322(part 5) 2012, hsn code: 94054090 make- havells/bajaj/crompton/philips. [ warranty period: 48 months after the date of delivery ] ]

CTN :45387836

22 Jun, 2026 NA

Kupwara - Jammu And Kashmir

Tender For supply of core compute ai workstation , edge ai developer board with integrated gpu , online power protection with eight outlet heavy duty surge protector system , online power protection with six outlet standard duty surge protector system , networking device eight port gigabit ethernet managed and smart with cabling , ribbon based thermal labeler

Central Government And Public Sector

CTN :45391556

02 Jun, 2026 NA

Multi City - Multi State

Tender For supply, testing and commissioning of smps based integrated power supply (mini ips) systemfor lc gate in re area with 200ah vrla battery (55+5 cells) as per rdso specification no.rdso/spn/165/2023 ,version 4.0 or with latest amendment/specification complete set with surge protection devices( in separate wall mountable spd box), status minitoring panel , cable for connecting ips to battery bank, tool kit, all spares as per rdso specification, all optional modules , user instruction manual, etc and commissioning of ips system at lc gate in accordance with rdso letter no. sts/e/ips/genl. dated.03.04.2008 or latest.[ warranty period: 48 months after the date of delivery ] ]

State Government

CTN :45327429

30 May, 2026 2.98 Lacs

Jodhpur - Rajasthan

Tender For providing and fixing of various electrical accessories at district and session court metro jodhpur - sitc of ip20 smd mid power led batten type integrated light fixture made from powder coated extruded aluminium housing with in built driver , system lumen efficacy 110 lm/watt output only at cw (5700k to 6500k) , internal surge protection of 4.0 kv with short & open circuit protection ,thd 10% , p. f. 0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000 k / 4000 k / 5700 k /6000 k/6500 k (as per ansi bin) as required., 1170mm(+/-10%) led batten with min. lumen output 2200 lm, sitc of ip-20 led recessed / surface mounted, round / square backlit & smd mid power led downlight with power coated die-cast aluminum housing with uv stabilized non yellowish diffuser with bis compliance 4.0 kv surge protected isolated driver, with short & open circuit protection input 320vac-48 hr protection, input 350vac-2 hr protection), having efficiency > 85% . system lumen efficacy of 110 lm / watt,at cw (5700k to 6500k) , thd 10 % , pf. 0.95, cri >80, life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000 k / 4000 k/ 5700 k /6000 k/6500 k (as per ansi bin) as required., recessed mounting, minimum lumen output 1950 lm, sitc of ip20, 2x2 led surface/ recessed mounting backlit & smd mid power type led light fixture not less than 35 mm housing depth made from crca sheet steel housing, high purity / transmissivity uv stabilized non -yellowish diffuser for uniform light distribution. operating voltage range 140-285 v, hv cutoff - lv cutoff should be 300-100v . high efficiency with 4 kv internal surge protection bis certified isolated driver having efficiency > 85% , with short & open circuit protection ( input 320vac-48 hoursprotection,input 350vac-2 hours protection) (integral with light fixture). system lumen efficacy of 120 lm/watt ,thd 10 % , p.f. 0.95,cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000 k / 4000 k / 5700 k /6000 k/6500 k (as per ansi bin) as required., recessed mounting, minimum lumen output 4320 lm, providing & fixing of bee star rated copper wounded with class of insulation f, double ball bearing capacitor start, aluminium body & aluminium blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 with down rod up to 30 cm with secondary support safety cable ( steel rope) , cotter pin, shackle kit with 3 x 1.5 sq.mm pvc insulated flexible copper conductor and making connection testing etc. as required., 1200 mm sweep bee 1 star rated (service value >=4.0 to 4.5 ), providing & fixing of ventilating fans capacitor start, copper wounded, single phase with pvc impeller, abs body, automatic openable louver shutter in existing opening including making connection, testing etc. as required., 200 mm sweep minimum air delivery 450 cum / hour, providing & fixing of 450 mm sweep oscillating type wall mounting / pedestal type fans with three speed, on and off position, sintered iron bush oil impregnated, with metal front and back 120 or more ribs guard; three no. aluminium blades, minimum air delivery 100 cum. / minute , minimum service value 1.11 cum./min/watt, noise level should be = 75 db, power consumption = 120 watts, motor protection through thermal overload protection device, including fixing with anchor bolts, making connection testing etc. as required., wall mounting type with adjustable vertical angle, supplying and laying fr pvc insulated & unsheathed flexible copper conductor of following nominal sizes with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from copper, stranding in acc. to is:8130/iec 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation pvc type a/c/d , flame retardant as per is 10810-53, better amperage rat

corporations/Associations/Others

CTN :45321766

15 Jun, 2026 45.73 Lacs

Paonta Sahib - Himachal Pradesh

Tender For procurement of electrical spares and consumables for 220 kv and 33kv switch yard at khodri power station - 245 kv lightening arrester, discharge current 10ka, frequency 50 hz,pressure relief class 40 ka(rms), long duration discharge class 3, m.c.o.v. 56 kv, make: oblum electrical industries pvt. ltd. /cg power and industrial solution ltd. or eq make as approved by engineer in charge., 145 kv lightening arrester outdoor type ,suitable for 145kv system voltage , discharge current 10ka, freq. 50 hz, high current impulse (4/10 s) 100 ka, rated lightning impulse withstand voltage 1.2/50 s - 650 kvp, polymer based (single phase) make-oblum electrical industries pvt. ltd. /cg power and industrial solution ltd,/ htachi / siemens india ltd or eq make as approved by engineer in charge., auxiliary switch (stack) 5no + 5nc, 220v, dc, make: crompton, hitachi or eq make as approved by engineer in charge for 220kv cgl make sf6 circuit breaker., surge monitor/surge counter with leakage current meter suitable for 220 kv lightening arrestor , make: cg power and industrial solution ltd./ oblum electrical industries pvt. ltd., 33kv ct indoor type , 3 core, 15va each, ratio 650-350/1 a + 1a , class 0.2s(2 core metering) & 5p10 (protection), str: 25ka for 3 sec. make siemens, crompton, hitachi or eq make as approved by engineer in charge., 33kv ct indoor type, 3 core, 15va each, ratio 300-150/1 a + 1a , class 0.2s( 2 core metering) & (5p10 protection, str: 25ka, for 3 sec. make siemens, crompton, hitachi or eq make as approved by engineer in charge, control motor, type c21, 2.6 a, 230v ac/dc, o/p 0.3kw, sr. no: 042-901, m/y 03/08, 750/ min. make: kpt shirol or eq make as approved by engineer in charge for 33kv cgl make indoor type sf6 circuit breaker., auxiliary switch 7no+6nc (stack), 250 volt dc, make: crompton, hitachi or eq make as approved by engineer in charge for 33kv cgl make indoor type sf6 circuit breaker., auxiliary switch 8no+ 8nc, 220v, dc, (motor drive ). make: abb/ hitachi or eq make as approved by engineer in charge for 245 kv, abb make isolator., 220 v, dc, close or trip-1 coil ( part no. exin - 400834 - r9)make: abb/hitachi or eq make as approved by engineer in charge for 145kv, abb make sf6 breaker., rectifier 15 a, 220 v, ac (part no. 1hyn-450040p1 ) make: abb/ hitachi or eq make as approved by engineer in chargefor 245kv, abb make isolator, mcb (2 pole,3a, 220v, dc ), over current earth fault relay, mc61a-nx, cat no : mc61anx2200, make: l&t electrical & automation, or eq make as approved by engineer in charge for 33kv sf6 braeker., 33kv busbar support insulator (epoxy) . make: universal engg. corporation,star electrical engg. works or eq make as approved by engineer in charge.(as per sample), epoxy bushing/ fixed contact of "r","y" &"b" phase bottom side for 33kv cgl make panel (as per sample), epoxy bushing/ fixed contact "r","y" &"b" phase top side for 33kv cgl make panel (as per sample), ratech wheel of 33kv sf6 breaker, cgl make, flexible contact of 33kv sf6 breaker finger, cgl make (as per sample), silica gel blue crystal in mesh size of 15 mm to 35 mm duly packed in poly lined moisture proof m s drums/carton, heat shrinkable cable terminal kit for 3- 400mm ,33 kv xlpe cable for outdoor application (make 3m/raychem/ densons)., heat shrinkable cable terminal kit for 3- 400mm ,33 kv xlpe cable for indoor application (make 3m/raychem/ densons)., heat shrinkable cable terminal kit for 3- 185 mm 33 kv xlpe cable for indoor application (make 3m/raychem/ densons)., heat shrinkable cable terminal kit for 3- , 185 mm 33 kv xlpe cable for outdoor application (make 3m/raychem/ densons)., p g clamp deer/panther for 220 kv conductor, p g tclamp deer/ zebra, for 220 kv conductor, p g clamp deer/ trantulla for 220 kv conductor, p g clamp tarantula/ trantulla for 220 kv conductor, p g clamp deer/deer for 220 kv conductor, p g clamp made of aluminum-alloy suitable for zebra to trantulla conductor with 4 nos bolt - n

Choke Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government And Public Sector

Central Government And Public Sector

State Government

corporations/Associations/Others