Latest chrom plating Tenders | Government chrom plating Tenders

Central Government And Public Sector

CTN :45409525

30 Jun, 2026 NA

Angul - Odisha

Tender For supply of insulation floor coating

CTN :45420637

24 Jun, 2026 NA

Pune - Maharashtra

Tender For supply of pressre barrel (chrome plating) for 7.62 x 51 mm,accuracy & velocity barrel for 7.62 x 51 mm

CTN :45386932

16 Jun, 2026 6.59 Crore

Gwalior - Madhya Pradesh

Tender For construction and development (civil work) for construction and demolition waste plant of 100 tpd as per boq of rfp/dpr supplying erection and commissioning of machines/equipment for construction and demolition (c and d) waste plant of 100 tpd 2nd cal - all kinds of soil, "excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers,, loose or soft soil, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all w, cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate., "foundations, footings, bases of columns, etc. for mass concrete.", cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate., "columns, pillars, piers, abutments, posts and struts.", "reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves,, "lintels, beams, plinth beams, girders, bressumers and cantilevers.", "along external wall where the apron is not provided using chemical emulsion @ 7.5 liters / sqm o, "filling by available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exce, thermo-mechanically treated bars. (fe 500 d or more), "aluminum turbo ventilator fan, size: dia 600 mm market rate", "sky light market rate ", 80x1.25mm m.s. laths with 1.25 mm thick top cover., "providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to is: 1868 wit, cement mortar 1:6 (1 cement : 6 coarse sand), 1:6 (1 cement: 6 sand), two or more coats on new work, "structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoist, 0.80mm thick with zinc coating not less than 275gm/m , 0.80mm thick with zinc coating not less than 275gm/m , "35 mm thick including isi marked stainless steel butt hinges withnecessary screws.", 35 mm thick shutters, half brick masonry with of class designation 40 in foundation and plinth in.cement mortar 1:4 (1 cement : 4 coarse san, "providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) nano polished (glossy, providing and laying broken china mosaic flooring for terrace using 12mm to 20mm broken pieces of glazed tiles to be lai, providing and fixing m.s. grills of required pattern to wooden frames of window etc. with m.s. flats at required specin, "construction of embankment/sub grade/ earth shoulders, as per clause 305 & its sub-clauses, where required but with app, "construction of granular sub-base by providing coarse graded material (cbr>30), spreading in uniform layers with motor, "providing, laying, spreading and compacting graded stone aggregate to wet mix macadam including premixing the material, providing and applying primer coat with cationic bitumen emulsion (ss1 grade) on prepared surface of granular base inclu, @ 0.25 kg per sqm (normal bituminous surfaces), for grading ii( 50-75mm thickness ) bitumen content 3.4% (vg-30), "for grading ii ( 30-40 mm thickness ), bitumen content 5.4% (vg-30)", procurement of fully automatic c&d waste processing unit(100 tpd) with dry and wet process inculding feeding & crushin, procurement of table vibrator for paver making unit including table vibrator,colour mixer,colour pigment,tables,concre, procurement of fully automatic fly ash bricks machine (120 ton compress force) with fully sensor based controlled 7 nos, procrement of vehicles articulated front end wheel loader,4-wheel drive,1.4 cum bucket,hydrostatic drive,, procrement of vehicles/tipper truck blazo 28t tipper,9 speed,bogie suspension,11x20-16pr tyres,6.17rar ,nac,16 cum box,4, procurement of pneumatic breaker (quotation), electrification /internal wiring and electrification (market rate)

CTN :45388788

11 Jun, 2026 NA

Kochi - Kerala

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - onboard ins kochi at ndmbi; hard chrome plating of the stabilizer rams and steering rams of ins kochi; service provider

Central Government/Public Sector

CTN :45401128

05 Jun, 2026 NA

Medak-T - Telangana

Tender For f9azs00085- chrome plating and hydrogen embrittlement of impeller npcil

State Government

CTN :45382897

08 Jun, 2026 13.48 Lacs

Faridabad - Haryana

Tender For dnit name : repairing of plaster work and providing and laying vitrified floor tiles, water proofing, floor mounted, pcc, flush door shutters, paint work, sanitary work in house no.1413, 1414, 1415 and 146 in sector-15 faridabad and all other works contingent thereto. chargeable head - annual maintenance of hsvp staff quarters in sector-15 and 15a, faridabad for the year 2026-27. - [10.1]providing and laying of base course of floors consisting of 100 mm thick cement 1:8:16 and 100 mm sand or stone filling., [10.109]providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of engineer-in-charge., [10.67.1]providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to i.s. 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement and matching pigments etc. complete. 1. size of tile 500x500 mm, [11.5.3]12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand), [11.6.2]15 mm cement plaster on the rough side of single or half brick wall of mix : 2. 1:6 (1 cement: 6 fine sand), [11.64.1]distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 1. new work (two or more coats) over and including water thinnable priming coat with cement primer, [11.96.1]finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade: 1. new work (two or more coats applied @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), [12.157.1.2]providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / panelling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer-in-charge. (glazing, panelling and dash fasteners to be paid for separately) : 1.2. for fixed portion powder coated aluminium (minimum thickness of powder coating 50 micron), [12.159.2]providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (cost of aluminium snap beading shall be paid in basic item): 2. with float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm), [13.29.1]steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 1. in stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete, [13.44]providing and fixing circular/ hexagonal cast iron or m.s. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick m.s. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ m.s. sheet box by means of

CTN :45072476

02 Jun, 2026 NA

Tawang - Arunachal Pradesh

Tender For bid to ras bid to ras corrigendum : supply of proprietary brand of make nerolac berger asian , birla white wall care putty water resistant white cement make nerolac berger asian , ppgi roofing sheet 10 ft x 3 ft long and thickness 0.63 mm with grard film the ppgi sheet shall have minium coating of 4 to 5 micron epoxy primer , pre painted galvatume aluminium zinc coating gi based plain steel sheet 0.50 mm thick an colour having a tensile strength 550 mpa , synthetic paint enamelled og colour confirming to is 5 to 2004 , painting brush 4 inch isi marked , nails various size , self taping steel screw half thread with rawl plug of 1 1 oblique 2 inch size isi marked 100 nos oblique pkt , anodised aluminium door 1000 mm x2100 double shutter with frame including all fittings and as directed aluminium section weighing 0.55 kg oblique mtr , anodised aluminium window triple track with frame of size 1000mm x 1000mm including all fittings and as directed aluminium section weighing 0.55 kg oblique mtr , anodised aluminium ventilator 1200x600 mm fixed type with glass 4mm thick including all fittings and as directed aluminium section weighing 0.55 kg oblique mtr , ms anchor bolt suitable for rcc work 12mm dia 300mm long with 2 washer and a nut minimum wt of each bolt and nut is 450 gm complete all as directed , ceramic tiles of size 600 mm x 600 mm for floor thickness between 9 to 10 mm thick 1st quality confroming to is 156 to 2006 , white cement confirming to is 8042 oblique 1989 , curtain arrangement drapery and rod made of 25 mm dia , retaining wall height 8 mtr x 3 mtr 5 nos 40 mtr cement opc 43 grade packed in hdpe bag each 50 kg wt confirming to is 8112 to 2013 , coarse sand free from vegetation confirming to is 650 to 1991 reaffirmed 2008 , coarse aggregate 40mm graded confirming to is 383 2016 , stone boulder 9 inch to 12 inch confirming to is 1597 part i 1992 reaffirmed 2002 , pvc pipe 75mm dia 3 mtr long confirming to is 4985 to 2000 reaffirmed 2006 , cement 43 grade opc packed in hdpe bag each 50 kg wt conforrn to is 8112 1989 make birla gold ambuja ultratech acc jkj daimia or equivalent , coarse sand free from vegetation , coarse aggregate 40mm graded , hardcore 63 90 mm graded , brick sub class , three phase 1.2 hp monoblock pump 430 volt complete with and incl 3 mtr length required size flexible suction pipe foot valve and connected accessories complete all as specified , distribution box 8 way spn 240 volts copper bus bar and neutral link earthing stud conforming is 13032 is 8623 double door type make havells legrand l and t , mcb spn 240 volts 32 amps make havells l and t standard , mcb sp 6 to 32 amps make havells l and t standard , pvc tape 19mm wide 5 m long make steelgrip anchor kinjal , cable pvc insulated electric cables heavi duty 1100 volts grade multi stranded copper conductor of size 1.5 sqmm single core frls confirming to to is 1554 part i 1988 make havells finolex polycab , cable pvc insulated electric cables heavy duty of size 1.5 sqmm single core frls confirming to is 1554 part i 1988 make havells finolex polycab , cable pvc insulated electric cables heavy duty 1100 volts grade multi stranded copper conducter of size 2.5 sqmm single core frls confirming to is 1554 part i 1988 make havells finolex polycab , pvc casing capping of size 1 inch medium grade snow white make presto polycab finolex , pvc casing capping of size 3 oblique 4 medium grade snow white make presto polycab finolex , modular switch piano 5 amp 230 volts flush type one way snow white make anchor ssk cona , led tube light fitings 15w 230v box type 4 feets with crca body pre coated white and prewired for led tube //bid details 2 / 70 complete make havells bajaj philips crompton , led mirror lights 1 feet 5 watts make havells bajaj philips crompton , screw full thread 6 x 19 mm isi marked 200 nos pkt , pvc switch board snow white size 6 inch x 6 inch for sockets and switches make supreme polycab finolex , pvc switch board snow white size 7 inch x 4

CTN :45359308

08 Jun, 2026 NA

Delhi - Delhi

Tender For providing of custom bid for services - local repair contract of chrome plating of cylinder liner (left & right bank)

Central Government/Public Sector

CTN :45358504

19 Jun, 2026 NA

Nashik - Maharashtra

Tender For supply of rectifier for dechrome,rectifier for chrome plating,rectifier for chrome plating,rectifier for cynaid cad barrel,rectifier for ammonium cad plating,rectifier for cynaid cad plating,rectifier for fluborate cad plating,rectifier for nickel plating,rectifier for zinc plating barrel,rectifier for degreasing

corporations/Associations/Others

CTN :45346453

09 Jun, 2026 29.95 Lacs

Coimbatore - Tamil Nadu

Tender For improvement works and supplying of kitchen accessories to the amma unavagam at poo market , mettupalayam road in ward no.72 of west zone. - earth work excavation of building in kind of soilsand sup soilsand full depth as may be directed by the departmental officers with initial lift and leads and cleaning and leveling the site., cement concrete 1:4:8(one cement,four sand and eight aggregate) using 40mm gauge hand broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted, supplying and erection shuttering,including necessary supports for plain in all floors using mild steel sheets of size 90x 60 cms and bg 10 stiffed with surfacewelded mild steel angles for boarding supported by casuarina props at suitable intervals etc. completecomplying with standard specifications as directed, for plinth beam, for lintel beam slab, for vertical walls, cement concrete 1:1.5:3 (one cement,one and half sand and three aggregate)using 20mm gauge hard broken granite stone jelly for all rcc items of work excluding centring, shutteringand cost of reinforcement grill but including fixing fan clamps and fixtures in rcc works wherever necessary as per the direction of departmental officers complete, cement concrete 1:2:4 (one cement, two sand and four aggregate ) using 20mm hard broken granite stone jelly for all pcc items of work etc., complete fixturas directed by departmental officer ., supplying,fixing and placing in position mild steel /ribbed torsteel rods for all rcc works including cost of steel and binding wire also in all floors,complete complying with standard specifications(upto 16mmdia rods), fly ash brick work in cm 1:4 (one cement & four sand) using size 9"x4 3/8"x2 3/4" including finishing,curing,etc., complete complyingwith standard specification., plastering with cement mortar 1:3 (one cement and three sand) 12mm thick in all floors including cost and conveyance of all materials to site etc,complete as per standard specifications, plastering with cement mortar 1:5 (one cement and five sand) 12mm thick in all floors including cost and conveyance of all materials to site etc,complete as per standard specifications, finishing the floor with 20mm cement concrete ( ellis pattern rst sort - no sand to be used) etc complete as directed., supplying, fabricating, erecting structural steel work for roofing welded or bolted type using ms channels, angles, plates and roundbars etc. conforming to is specification including primer coating and enamal painting as per design given by the departmental officers etc, complete as per standard specification., supplying and roofing with pplg sheet of selected colour fixed to required profile inclusive of brackets and screw arrangements etc.,complete, supplying and erecting pull and push type rolling shutter with i.s.i. make of approved size and section using 18 gauge g.i.sheet with manually operated type. the shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc, complete as per standard specification., supply of man hole cover and frame is 12592 including fixing etc. extra heavy duty circular (228kg) 600 mm dia, supplying and fixing in position cement based hydrualically pressed anti skid tiles (pattern design) 20mm thick in cement mortar 1:3 (one part of cement and three part of plastering sand (p-sand)), 20mm thick and pointed with same colour of cement etc., complete as per standard specification, dadooing the walls with first quality approved coloured glazed tiles of size 150x150x6mm laid in cement motar 1:2 mix to 10mm thick and pointing with white cement using 0.40kg per sqm including finiching the joints and surface etc., complete, flooring finishing with first quality ceramic tiles of all colours of size 305cm x 305cm x 6mm laid in cement motar1:3 mix to 20mm thick and painting with cement paint using 0.3kg 1m2 including finishing the joi

Chrom Plating Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

corporations/Associations/Others