Latest chrome plate Tenders | Government chrome plate Tenders

CTN :45420440

24 Jun, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For supply of phosphating chemical i. c. i phosdine- 40 (code no. 62-40) /phoschem 203 for phosphate coating as per s

CTN :45404122

09 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

CTN :45384476

11 Jun, 2026 NA

Dharmapuri - Tamil Nadu

Tender For purchase of equipments for mechanical department - purchase of equipments for mechanical department, tail stock assembly medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, working model of fuel supply system - petrol mpfi type petrol multi point fuel injection (mpfi) system for dismantling and assembly practice system type: non-working / cut-section model for study of internal construction construction: actual automotive components or equivalent training model mounted on frame includes throttle body (sectioned), fuel injectors, fuel rail, intake manifold includes fuel pump, fuel tank (dummy), fuel filter, pressure regulator includes ignition system components: ignition coil, spark plug, distributor (if applicable) ecu module (dummy/display type) with wiring layout representation all components cut-open, painted, and clearly labelled provision for manual demonstration of flow path and component interaction mounted on rigid ms powder-coated frame designed for repeated dismantling, assembly, and component identification, hydraulic cylinderbore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply: mounted on training base suitable for dismantling and inspection, hydraulic operated directional control valves (dcv) type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study, bearing with shaft assembly type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips end covers mounting: bench-mounted / frame mounted unit, coupling unit using driving and driven shafts using plummer block bearing unit the plummer block housing material: cast iron (grade fg 200 or equivalent). type: sng or snl series (split-type housing). sealing: felt seals or v-ring seals (to demonstrate lubrication retention). lubrication: provided with a grease nipple at the top center for manual lubrication practice. the bearing type: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series). bore diameter: standard 25mm or 30 mm. shafting and coupling shaft material: ground carbon steel (en8 or en9) for high surface finish. coupling type: flexible coupling: to demonstrate the bearings ability to handle slight misalignment. rigid flange coupling: to demonstrate traditional direct connection. driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., 3d printing machine build volume(wxdxh) 256 x 256 x 256 mm shell enclosed (plastic & glass) hot end all-metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps time lapse supported filament run out sensor :yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter

CTN :45386932

16 Jun, 2026 6.59 Crore

Gwalior - Madhya Pradesh

Tender For construction and development (civil work) for construction and demolition waste plant of 100 tpd as per boq of rfp/dpr supplying erection and commissioning of machines/equipment for construction and demolition (c and d) waste plant of 100 tpd 2nd cal - all kinds of soil, "excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers,, loose or soft soil, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all w, cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate., "foundations, footings, bases of columns, etc. for mass concrete.", cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate., "columns, pillars, piers, abutments, posts and struts.", "reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves,, "lintels, beams, plinth beams, girders, bressumers and cantilevers.", "along external wall where the apron is not provided using chemical emulsion @ 7.5 liters / sqm o, "filling by available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exce, thermo-mechanically treated bars. (fe 500 d or more), "aluminum turbo ventilator fan, size: dia 600 mm market rate", "sky light market rate ", 80x1.25mm m.s. laths with 1.25 mm thick top cover., "providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to is: 1868 wit, cement mortar 1:6 (1 cement : 6 coarse sand), 1:6 (1 cement: 6 sand), two or more coats on new work, "structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoist, 0.80mm thick with zinc coating not less than 275gm/m , 0.80mm thick with zinc coating not less than 275gm/m , "35 mm thick including isi marked stainless steel butt hinges withnecessary screws.", 35 mm thick shutters, half brick masonry with of class designation 40 in foundation and plinth in.cement mortar 1:4 (1 cement : 4 coarse san, "providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) nano polished (glossy, providing and laying broken china mosaic flooring for terrace using 12mm to 20mm broken pieces of glazed tiles to be lai, providing and fixing m.s. grills of required pattern to wooden frames of window etc. with m.s. flats at required specin, "construction of embankment/sub grade/ earth shoulders, as per clause 305 & its sub-clauses, where required but with app, "construction of granular sub-base by providing coarse graded material (cbr>30), spreading in uniform layers with motor, "providing, laying, spreading and compacting graded stone aggregate to wet mix macadam including premixing the material, providing and applying primer coat with cationic bitumen emulsion (ss1 grade) on prepared surface of granular base inclu, @ 0.25 kg per sqm (normal bituminous surfaces), for grading ii( 50-75mm thickness ) bitumen content 3.4% (vg-30), "for grading ii ( 30-40 mm thickness ), bitumen content 5.4% (vg-30)", procurement of fully automatic c&d waste processing unit(100 tpd) with dry and wet process inculding feeding & crushin, procurement of table vibrator for paver making unit including table vibrator,colour mixer,colour pigment,tables,concre, procurement of fully automatic fly ash bricks machine (120 ton compress force) with fully sensor based controlled 7 nos, procrement of vehicles articulated front end wheel loader,4-wheel drive,1.4 cum bucket,hydrostatic drive,, procrement of vehicles/tipper truck blazo 28t tipper,9 speed,bogie suspension,11x20-16pr tyres,6.17rar ,nac,16 cum box,4, procurement of pneumatic breaker (quotation), electrification /internal wiring and electrification (market rate)

CTN :45405578

11 Aug, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply of gravity cock 1/2 inch chrome plated to rcf drg. no. cc63933, alt. c. mat. & spec. as per drg. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45385316

03 Jun, 2026 NA

Sonipat - Haryana

Tender For sonipat a/mtc estimate for office building circle and division - visitor chair, pp arm, chrome plated pipe frame, seat cushion, back high elasticity mesh tapestry / at phe sub division no. 5, sonepat

Central Government/Public Sector

CTN :45396672

26 Jun, 2026 NA

Bhavnagar - Gujarat

Tender For supply of cz m6 x 50 mm bolt conferming to is 1367 /1364 cl 8.8, chrome plated. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45378692

12 Jun, 2026 NA

Panchmahal - Gujarat

Tender For supply of various tools and tackles for khep. combination plier insulated with thick c.a. sleeve with joint cutter, generally confirming to is 3650-1981, product no. 1621-8. , taparia circlip plier internal state nose 1441 7s 19 to 60 mm , taparia circlip plier external state nose 1443 7s 19 to 60 mm , taparia circlip plier internal state nose 1441 9s 40 to 100 mm , taparia circlip plier external state nose 1444 9s 40 to 100 mm , taparia make screw driver heavy duty with plastic handle no.927 having 200mm blade length,blade dia 10mm and tip dia 10x1.2mm. , heavy duty pipe wrench, length -350 mm, least max opening-60 mm , heavy duty pipe wrench size 600mm , least max opening 95 mm. , sledge hammer with wooden handle taparia make product no. shh 1350 , sledge hammer with wooden handle taparia make product no. shh 1800 , sledge hammer with wooden handle taparia make product no. shh 3600 , sledge hammer with hickory wood handle - weight 5400 gms , double ended fix spanner sets ,(ribbed) content- 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x19, 20 x 22, 21 x 23, 24 x 27, 25 x 28, 30 x 32, , double ended spanners (ribbed), chrome plated, size- 32x36 mm , double ended spanners (ribbed), chrome plated, size- 41x46 mm , double ended spanners (ribbed), chrome plated, size- 50x55 mm , double ended ring spanners sets, ,contents- 6x7 , 8x 9, 10x11, 12x13, 14x15. 16x17 , 18x19, 20x22 , 21x23, 24x27, 25x28, 30x32 mm. , bi hexagonal ring spanner 41x46 mm , slogging ring spanner size 36 mm , slogging ring spanner size 41 mm , slogging ring spanner size 46 mm , octagonal chisel, length - 125mm, cutting edge - 9 mm, taparia product no-101 , allen key set black finish of mm , series having sizes 1.5mm ,2mm,2.5 mm ,3mm ,4mm ,5mm ,6mm , 8mm , & 10mm allen keys , oil can, size: 500ml , taparia make tool adjustable spanners, product no 1171 - 8 , taparia make tool, adjustable spanners, product no 1173 - 12 , oil barrel hand pump , manila rope h/l-3 strand grade size-18mm dia , manila rope size: 1" , 25mm) dia , manila rope, size: 16 mm dia , chain pulley block cap-2 ton heavy weight , chain pulley block cap 3 ton, lift: 4.5 m , polyester flat webbing slings with loops at both end, straight lift wll :- 2 ton , length :- 1 mtr. , polyester webbing sling, swl 5000 kg x 3 mtr , two in one screw driver,blade length 200mm,blade dia 5.0,tip dimention 1 philips 3.5 * 0 philips , 1/2 dr. deep socket set 11pcs. deep socket set contents sockets 8,10,12,13,14,16,17,18,19,21 & 24mm taparia make product slhs11 , tin cutter with spring size 14" confirming to is 6087 -1971 , hand smooth file product no.:- hf2003 , vernier caliper , mitutoyo" make,size- 0- 300 mm , digital vernier caliper, size - 0-150 mm , allen key set black finish of inch eries having sizes 1/16" , 5/64" ,3/32" , 1/8",5/32",3/16",7/32",1/4",5/16",3/8" allen keys , tubular spanner set (8 pcs ) product no ts 08 taparia make , polyester webbing sling,10ton capacity,12 feet long,250mm width ,

Central Government / Public Sector

CTN :45396862

15 Jun, 2026 NA

Kazipet - Telangana

Tender For manufacturing and supply of single piece spring inserted reusable seize nut for size m-25 lock nut m 025. dimensional requirement of the nut shall be as under (as per irs/t-23) and generic specifications (provisional) for self-locking nuts to be used in bolts for track fittings. basic material of the nut shall be of steel conforming to chemical composition, mechanical and physical properties mentioned in is-1367 part-06 or equivalent standards ensuring the performance requirements of indian railways as mentioned in this document with materials electro galvanizing or hot-dip galvanizing or nickel alloy coating etc. tenderer must enclose as per din 65151-dynamic testing of the locking characteristics of fasteners under transverse loading conditions (vibration test) or nas3350(national aerospacestandard)- vibration test requirements for high quality, self-locking nuts, used at temperatures up to 800 degrees f or iso 7481:2000 aerospace -nuts, self-locking, with maximum operating temperature less than or equal to 425 degrees c. brinell hardness of the nut shall be 139-287 hbw (as per sub-clause 9.1 of is 1367 part-6)along with tender. pitch screw threads for check rails of isejs and fish plated joints of cms crossings 28 & 25 mm pitch in 3 mm . [warranty period: 60 months after the date of delivery ] [ warranty period: 60 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45396534

22 Jun, 2026 NA

Tirupati - Andhra Pradesh

Tender For supply of cx- antirust (anti- rust water soluble coating treatment) or equivalent to prevent non- painted surfaces& fins of lhb wheel brake disc from getting rusted again. note : 1)chemical should be water soluble coating as per rcf specification mdts-22283 2) chemical should not irritate an operator skin or respiratory system. [ warranty period:30 months after the date of delivery ] ]

Chrome Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

Central Government / Public Sector

Central Government / Public Sector