Get complete information related to latest Chute Repair Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Chute Repair Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Chute Repair Tenders.
Tender For tender for satisfactory trial. , carry out strengthening work using the channels and angles provided by src and irc and conduct a satisfactory trial. , to fabricate the weak sloppy plates of the donali suit fitted on milo from the given ms plate as per the drawing and give a satisfactory trial. , removing the worn out trpf cover fitted on the mill and making and fitting a new cover using the plate given as per the drawing sample and giving a satisfactory trial. , to carry out the work of tipping the teeth of mill rollers and conduct a satisfactory trial. , to carry out the work of chevron cutting as per requirement on mill rollers and give satisfactory trials. , work involving the errectation of broken teeth on the mill s pressure chuterepair of worn out teeth via hard facing and conducting a satisfactory trial run , dismantling the old pressure chute errected on the mill completely replacing the corroded section repairing and welding the damaged parts of the ss plate reassembling the unit fitting it onto the mill , fabricate the juice tank for the mill house using the provided 6 8 mm plate and conduct a satisfactory trial run , removing the bottom of the supply juice tank errecting a 12 mm plate in its place and conducting a satisfactory trial. , manufacturing the bed for the s.r.c. and i.r.c. motor gear and conducting a satisfactory trial. , remove the worn out trpf headstock side plate errect a 6mm plate in its place and conduct a satisfactory trial. , fabricating teeth for the hydraulic grab replacing old or damaged teeth with new ones and conducting a satisfactory trial run. , a dismantling old columns beam channels etc. b manufacturing and installing new columns beam channels etc. , removing the old corroded platform and replacing it with a new one. , installing 16 inch 18 inch manholes with blinds , constructing a bed for the pump fitting the pump and motor and conducting a trial run of up to 20 hp. , dismantling fabricating and erecting weak corroded pipe lines up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting weak corroded tees up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting weak corroded nipples up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated cross member up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated band up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated flange up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak sloping reducer up to 12 inch and providing a satisfactory leak proof trial.
Tender For supply of cast steel bolster with integrated 14'' center pivot bottom for lwlh25 bogie as per rdso drg. no. wd-13012-s-5 (sheet 1, 2) with latest alteration (item no. 1 duly welded with item no. 2,3,4) confirming to rdso spec. no. wd-40 lwlh25 bogie (''k''- class)-2015 with latest amendment. material & spec. as per drg. and rdso spec. [ warranty period: 72 months after the date of delivery ] ]
Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no wc-07001fac/icf note : - 1 advance handing over of coaches for cutting may be allowed. 2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 16 mt approx.) s.b.lot no. bpl/crws/26-27/cond. coach/15/0068 restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.
Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decoram, non-ferrous & restricted items will not be delivered) coach no 1-wc-910037 art/beml2-wc -920016 art/beml 3-wc-910036 art/rcf note : - advance handing over of coaches for cutting may be allowed. 2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 48 mt approx.) s.b.lot no. bpl/crws/26-27/ cond. coach/15/0069 restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc. note: delivery will be made on actual nos basis.
Tender For supply of shackle lock with washer, center pivot pin & lock pin for lhlw 25t bogie for boxns wagon rdso drg. no. wd-15013-s-01 alt. 5 or latest item no. 2,3,4 & 5 [ warranty period: 30 months after the date of delivery ] ]
Tender For auction sale of depot ferrous scrap - cast steel scrap consisting of yoke, knuckle, coupler body, buffer plunger, equalizer beam, centre block, repair kit, pinion, gear cp top, cp bottam, narrow & wide jaw adaptor, center pivot, axle box, brake discs, lock lift assembly, cbc housing with and without rubber, block schaku coupler item, brake beam, piece of bogie frame, bhrr adopter, nut, bolt and other miscellaneous cs/ci scrap unservicible for railway use. mode of delivery by actual weight fdp-40 days. material should be loaded with one end from lot as per description.
Tender For supply of bogie center pivot top for lwlh 25 bogie of boxns wagon. drawing no. : rdso's drg. no. wd-15013-s/01, alt. 4 , item no. 1. material and specification : as per drawing and conforming to rdsos spec. no. wd-40- lwlh25 bgie ("k"- class) -2015 (revision no. 1) amendment slip no.2 of february-2021. [ warranty period: 72 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]
Tender For providing of repair and overhauling service - repair of hydraulic press for packing brake chute; repair of hydraulic press for packing brake chute; yes; buyer premises
Tender For auction sale of rolling stock - pl no.98111061, condemned bg-8 wheeler- icf ac coaches 3 nos, without bogie, with all available ferrous, non-ferrous-wooden fittings thereon but excluding the following reclaimable items. 1} coach no. special repair accn 056905 (year built 2005), ds-8 no. 334716 dt 31.03.26, mechanical rc items are common for all three coaches as per sse/c&w/srr letter dt 24.01.2026- 1] complete bogie arrangements including wheel sets 2 nos, 2] buffer plunger and casing 4 nos 3] cbc/screw coupling set [draw bar with hook, draft gear assembly] 2 sets, 4] center pivot 2 nos. 5] bogie mounted brake cylinder 4 nos, 6] distributor valve complete full set 1 set, 7] wearing piece( bronze) and plate 4 nos each, 8] auxiliary reservoir 200 l. 1 no 9] main doors -4 nos 10] cut off angle cock- 4 nos. 11] dirt collector- 2 nos 12] non return valve(fp)- 1 no. electrical rc items as per sse/electrical/srr /letter no.elg/srr/6a dt 23.01.2026- 1] alternator - 2 nos 2] regulator - 2 nos 3]vrla battery -56 nos. 4] tensioning device - 4 no 5] bldc fan 400 mm-8 nos. 6] 150mm fan- 4 nos 7] exhaust fan-04 nos 8]5 w led with fittings (double led)- 16 nos 9] 5 w led with fittings (single) - 5 nos 10] 2w led 8 nos 11] emergency light unit-3 nos 12] d type led fitting - 5 nos 13] md switch-32 nos 14] mobile charger - 16 nos 15] axle pulley -4 nos 16] pumb - 2 nos 17] pre cooling unit - 1 no 18] pre cooling socket -1 no 19] inverter panel- 2 units 20] power panel- 1 unit 21] rmpu- 2 units.. 2} coach no. special repair accn 056904 (year built 2005), ds-8 no. 334717 dt 31.03.26, electrical rc items as per sse/electrical/srr /letter no.elg/srr/6a dt 23.01.2026-1] alternator 25 kw - 2 nos 2] regulator - 2 nos 3] vrla battery -56 nos. 4] tensioning device - 4 no 5] inverter 2 nos 6] bldc fan -8 nos. 7] emergency light unit-2 nos 8] 150mm fan- 4 nos 9] exhaust fan-04 nos 10] 5 w led with fittings (double led)- 18 nos 11] 5 w led with fittings (single) - 1 no 12] 5 w led -5 nos 13] axle pulley -4 nos 14] pump - 2 nos 15] pre cooling unit -1 no 16] pre cooling socket - 2 nos 17] inverter panel -2 units 18]power panel- 1 unit 19] rmpu- 2 units.. 3} coach no. special repair accn 041198 (year built 2004), ds-8 no. 334718 dt 31.03.26, electrical rc items as per sse/electrical/srr /letter no.elg/srr/6a dt 23.01.2026-1] alternator - 2 nos 2] regulator - 2 nos 3]vrla battery -56 nos. 4] tensioning device - 4 no 5] inverter 2 nos 6] bldc fan -8 nos. 7] 150mm fan- 4 nos 8] exhaust fan-04 nos 9]5 w led with fittings (double led)- 18 nos 10] 5 w led with fittings (single) - 6 nos 11] d type 5 w led 2 nos 12] 2 w led-8 nos 13] md switch-32 nos 14] mobile charger - 8 nos 15] axle pulley -4 nos 16] pump - 2 nos 17] pre cooling unit - 1 no 18] pre cooling socket -2 nos 19] inverter panel- 2 units 20] power panel- 1 unit 21] rmpu- 2 units. custodian sse/ c&w/ shoranur.