Latest chutes Tenders | Government chutes Tenders

corporations/Associations/Others

CTN :45401261

16 Jun, 2026 16.01 Lacs

Bacheli - Chhattisgarh

Tender For replacement of liners for tcp bunker, secondary screen under chutes and np screen under chute at screening plant, dep. no.-5.

CTN :45412373

27 Jun, 2026 10.12 Lacs

Murshidabad - West Bengal

Tender For service contract for 10 months of poking of silo unloading telescopic chutes to facilitate smooth unloading of ash from silo along with poking of esp, aph and silo hoppers of unit 3 and 4 under ahp operation ii, sgtpp

CTN :45384476

11 Jun, 2026 NA

Dharmapuri - Tamil Nadu

Tender For purchase of equipments for mechanical department - purchase of equipments for mechanical department, tail stock assembly medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, working model of fuel supply system - petrol mpfi type petrol multi point fuel injection (mpfi) system for dismantling and assembly practice system type: non-working / cut-section model for study of internal construction construction: actual automotive components or equivalent training model mounted on frame includes throttle body (sectioned), fuel injectors, fuel rail, intake manifold includes fuel pump, fuel tank (dummy), fuel filter, pressure regulator includes ignition system components: ignition coil, spark plug, distributor (if applicable) ecu module (dummy/display type) with wiring layout representation all components cut-open, painted, and clearly labelled provision for manual demonstration of flow path and component interaction mounted on rigid ms powder-coated frame designed for repeated dismantling, assembly, and component identification, hydraulic cylinderbore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply: mounted on training base suitable for dismantling and inspection, hydraulic operated directional control valves (dcv) type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study, bearing with shaft assembly type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips end covers mounting: bench-mounted / frame mounted unit, coupling unit using driving and driven shafts using plummer block bearing unit the plummer block housing material: cast iron (grade fg 200 or equivalent). type: sng or snl series (split-type housing). sealing: felt seals or v-ring seals (to demonstrate lubrication retention). lubrication: provided with a grease nipple at the top center for manual lubrication practice. the bearing type: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series). bore diameter: standard 25mm or 30 mm. shafting and coupling shaft material: ground carbon steel (en8 or en9) for high surface finish. coupling type: flexible coupling: to demonstrate the bearings ability to handle slight misalignment. rigid flange coupling: to demonstrate traditional direct connection. driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., 3d printing machine build volume(wxdxh) 256 x 256 x 256 mm shell enclosed (plastic & glass) hot end all-metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps time lapse supported filament run out sensor :yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter

CTN :45369209

22 Jun, 2026 11.13 Lacs

Midnapore - West Bengal

Tender For service contract for coal bunker and feeder chutes cleaning as and when required basis of ktps unit# 3 to 6 during rainy season under bm

Central Government/Public Sector

CTN :45386466

09 Jun, 2026 49.41 Lacs

Visakhapatnam - Andhra Pradesh

Tender For running maintenance of technological equipment in converter shop of sms-1.- repair of technological structures in converter shop, mixer discharge spout door rope changing, lance oxygen and water hoses replacement and hose shifting , lance guide minor structural repairs during operation, assistance in removal of lance from thimble socket, converter tilt drive lube oil topping up in lube tank, minor structural repairs of ferro alloy chutes, hoppers and bulk material chutes during converter operation, shifting of stc, sptc&sdc, various running repairs of stc, sptc, sdc, and sample&service car, lime fines screw feeder jamming rectification by cleaning, shifting of mobile equipments like debricking m/c during breakdown in front of converter., tap hole drilling m/c drill bit hard facing, telescopic hoist rope changing/portable repair during relining of converter, well mix pipe changing in l.p bay, steel teeming ladle bell crank lever bracket/ trunnion collar changing, steel teeming ladle bottom purging adapter plate fixing, hot metal tilter /steel teeming ladle resting bracket repair, various minor structural and other repairs like dart pipe centering, tip cleaning and device locking etc in slag cut off device.replacement of charging crane/ mixer crane tilter hook, assistance in shifting jack car and telescopic hoist, minor repairs of lance carriage balancer during operation of converter, minor repairs of lance foldable platform &lance stands, minor repairs of dog house & dog house doors during operation, hot metal ladle spout repair, lub pump changing in revamped converters, shifting, jam cutting and other minor repairs of lance assemblies.

State Government

CTN :45135987

15 Jun, 2026 NA

Kutch - Gujarat

Tender For corrigendum : work of fabrication, erection & modification of lignite transfer chutes at lhp-kltps.

State Government

CTN :45398351

17 Jun, 2026 NA

Khaperkheda - Maharashtra

Tender For design, engineering, supply and installation of weld overlay modular transfer chutes for smooth flow & centre feeding of coal through y chute of apron feeder no. 1 & 2 to conv. 2c & 2d ; conv. 9 to conv. 5a & 5b ; crusher no. 1 to conv. 4a & crusher no. 2 to conv. 4d and weld overlay liners for impact crusher installed at chp-i (4 x 210 mw),

CTN :45057581

04 Jun, 2026 9.50 Lacs

Farrukhabad - Uttar Pradesh

Tender For corrigendum : supply of fabrication and erection work e e - places , replacing wornout runner base and installing a new runner base of cane carrier and baggage elevator and r b c , replacing wornout runner with new one of cane carrier and baggage elevator and r b c , removing wornout angle iron and t iron of the cane carrier and reinstalling it by straightening the crooked part , removing the wornout part of the suit from different places and fitting it with new one , chevron grooving of new rollers of the mill , chevron grooving of old rollers of the mill , remove the wornout partition plates of the juice box above and below the juice heater by 10 or 12 mm ms plate and install it , installing ribs at the top and bottom partitions of the juice heater , repairing save all of qurdbody , removing old wornout gutters installed at various places and installing it with new gutters , remove the old wornout save all from pan and quard and install it with new one , reinstalling the new umbrella fitted inside the pan by making a new one and removing the old one , replacement ribbon arm of the mascute receiving crystallizer , making new separator of a centrifugal machine , removing the wornout truff of the hopper and installing it with new one , making and installing new separators for continuous centrifugal machines , removing the tubes of quad juice heater and dynamic juice heater and expanding them by installing new tubes and giving their hydraulic testing satisfactory of size 42 mm , removing the tubes of pan installing new tubes and expanding them and giving hydraulic tesing with satisfactory trial of size 96 mm , removing the wornout flue gas ducting of both the boilers and installing it with newone making from new or old plates , removing the wornout front and roof plate at boiler number 1 and 2 and installing with a new plate , removing the damaged boiler damper and installing a new one , making bagasse suit and installing. , replacement of juice over flow box of clarifier , making and installing bed of motor and pumps at various places as per requirement , replacement 6 inch dia cooling pipe of sulfur furnace , removing the monitor casing of a machine from old machine and installing it and giving its a trial , making amd replacing manholes at various places , making and replacing the enternals of cather of the pan. , making and replacing the new hood of cane cutter , removing the old bottom plate of the lowest compartment of the clarifier and placing a new plate on it after placing an angle trap as per the instructions and giving a satisfactory water trial , reinstalling the stirrer of the clarifier and giving a satisfactory trial , removing the shaft of a pug mill and replacing the old bushes on both sides and fitting new ones , removing and refitting the shaft of a brown sugar magma mixer and installing with new bush , reinstalling the trufff of connecting rod of the hopper , making and installing new catcher strainer , removing the old rail line of the trolley of the unloader and fitting the new rail line satisfactorily and doing water level , reinstalling the old rail line of the unloader s bridge and fitting it and checking water level etc , removal of old and weak channels of 3 inches to 10 inches diameter installed at various places and installation of new ones as per requirement , cutting and straightening old plates installed at various places as per requirement , removal of old and wornout scrubber installed on sulfur furnace and making and replacing with 8 or 10 mm plate and making all the connections , removing the trufff plate including support corroded shell and top cover plate of the top chamber of the clarifier and fitting the new plate and giving it s a water proof trial , re-installation alignment and //bid details 2 / 47 trial of hopper driving end , making and installing the top cover of the centrifugal machine , making an arm and installing it on the shaft of pug mill , making and installing scrubber and bot

CTN :45367742

19 Jun, 2026 NA

Jamnagar - Gujarat

Tender For supply of fancy tap with l bend , cp waste coupling for steel kitchen sink 100x32mm , ewc china glazed p trap , gi elbow 15mm , gi elbow 20mm , gi nipple 15x100 mm long , gi nipple 20x100 mm long , gi nipple 20x150 mm long , gi nipple 20x75 mm long , gi plug 15mm , gi plug 20mm , gi claimps 20mm dia tubing , gi elbow reducing 20x15mm , gi elbow reducing 25x20mm , gi socket 15 mm , cp grating 150 mm dia , pvc flushing cistern l l 10 ltr cap , gi socket reducing 25x 15 mm , gi socket 20 mm , gi tubing 15 mm medium grade , gi tee equal 15 mm , gi tees equal 20 mm , gi wiremesh roll 15mtr roll of 30 kgs , gi tubing 20 mm medium grade , glass sheet 3 mm thick ordinary quality in sqaure n ecx 0 point 50 sqm each pane , glass sheet plane 4 ft x 4 ft x 5 mm thick , glass shelf 600 x 120mm x 6mm thick with chromium guard , hacksaw blade both side teak heavy duty , helical door spring 250mm , glass sheet pin headed 4 ft x 4 ft x 5 mm thick , hydrolic door closer left , hydrolic door closer right , looking mirror 18 inch x 24 inch with pvc frame , looking mirror 5 feet height for office , nails 1inch , nails 1 point 5 inches , nails 4 inches , oil putty , paint blue , paint synthetic enamal in white colour , pillar tap for whb swan neck , plywood bwr grade of size 8 ft x4 ft x6mm , putty glazing , pvc ball cock float valve 15mm complete , pvc ball cock float valve 20mm complete , steel ms hinges butt 75 mm , looking mirror 600x450 pvc frame , pvc pillar tap 15mm fancy , pvc ball cock float valve 25mm complete , pvc bib cock 15 mm , pvc bib cock long body 15 mm , pvc bib cock short body 15 mm , pvc connection 15x450mm long complete with nut bolt and washer , pvc grating round or square 100 x 150mm , pvc grating 100mm , pvc grating 140 mm , pvc grating 75mm , pvc connection 15x600mm long complete with nut bolt and washer , pvc shower rose 15 x 100mm , pvc urinal waste pipe with coupler screw type , pvc waste pipe corrugated 32 x 900 mm long , pvc stop cock 15mm , pvc stop cock 15mm external thread , pvc towel rail 24 inches 600mm , pvc waste pipe 32 mm flexible type heavy grade 600 mm length , pvc waste pipe flexible 40mm x 600 mm , rat rail brass rod pattern spring 300 mm including roller and roller plate , stainless steel kitchen sink 675 x 535mm , water storage tank 500 ltr , stainless steel kitchen sink with drainboard overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete , stainless steel plate rack size 1220x x915x610mm , stainless steel plate rack size 900x750x250mm , steel ms hinges butt 100 mm , cp brass soap dish , taflon tape , turpentine oil , water storage tank 1000 ltr , bib tap for sink swan neck , wash basin 550 x 400 mm , seat cover for wc with rubber base , corner glass shelf 9 inch x 12 inch size , aluminium door stopper 100mm double rubber type , double layer cyl verticle tank 1000 ltr white colour , double layer cyl verticle tank 700 ltr white colour , hydraulic door closer , mortise door lock , pvc grating with waste hole basin mixer 150mm , pvc lid for tank 1000 ltrs with hinges and screw , pvc pipe 15 mm 10 mtr long , pvc pipe 20 mm 10 mtr long , pvc pipe 25 mm 10 mtr long , ss sink coupling no 3 , ss sink coupling no 4 , tank cover for tank 500 or 1000 ltrs , gi nipple 20 mm tank checknut , gi tank nipple 25 mm checknut , gi tank nipple 15 mm checknut , ms tower bolt 150 mm , white cement i kg bag , aluminium curtain rod 25 mm 12 feet long , cp bib cock 2 way 15 mm , ball valve high pressure ptmt pvc withapoxy coated aluminium rod 32 mm , bib cock brass 15 mm , cp waste coupling 32 mm brass cp , ball valve high pressure ptmt pvc withapoxy coated //bid details 2 / 116 aluminium rod 20 mm , ball valve high pressure ptmt pvc withapoxy coated aluminium rod 15 mm , white cement 5 kg bag , pvc elbow 15 mm , pvc elbow 20 mm , pvc elbow 25 mm , leather tool bag , nails wire of various size , fevicol 5 kg pack size , tumbler holder glass

CTN :45356043

18 Jun, 2026 14.00 Lacs

Multi City - Telangana

Tender For fabrication and replacement of structures like discharge/receiving chutes, walkways, trusses, feeder hoppers, chequered sheets, platforms, ladders etc. at ocp3 chp, rg2 for a period of one year.

Chutes Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

State Government

State Government