Latest ci fitting scrap Tenders | Government ci fitting scrap Tenders

Central Government/Public Sector

CTN :45306043

20 Jun, 2026 40.00 Lacs

Jammu - Jammu And Kashmir

Tender For corrigendum : maintenance of day to day complaints of water supply including connected items at various loc under ge nagrota - m&l for repair/rectification of leakage to water supply distribution lines 15 mm dia to 25 mm dia gi tubing by necessary excavation, returning/filling as required, tightening of loose joints of union, elbow, socket etc, threading if required including replacement of gi union/socket/nipple as required complete all as specified and directed., all as per srl item no.1 above but for gi tubing of 40 mm dia to 50 mm dia complete all as specified and directed., all as per srl item no.1 above but for gi tubing of 80 mm to 150 mm dia complete all as specified and directed., all as per srl item no.1 above but for gi tubing /di /ci /ms of 150 mm dia to 300 mm dia complete all as specified and directed. note : (i) the complaints for the above works shall be registered by contractor at the water supply complaint cell of age e/m (ii) stationary required such as complaint book, job cards etc shall be arranged by the contractor and proper record shall be maintained by the contractor.(iii) tools ,plumber with helper and transport with driver for attending of above complaints shall be arranged by contractor. (iv) the rate quoted by the contractor for above jobs under item no 1 to 4 shall be inclusive of cost of works under note (i) to (iii) above. (v) the said complaints shall be rectified within 12 hrs of the registration of the complaints failing which recovery of rs.500/commplaint shall be made for contractors due payment (vi) the stores/item required for the works under item no 1to 4 shall be measured separately under relevant item as supply only. (vii) excavation, returning/ filling shall be measured and paid for separately and material required for the works above shall be included to quoted rates., excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep including getting out in hard/dense soil complete all as specified and directed., returning /filling including watering , leveling , spreading and well ramming in layers not exceeding 25cm thick complete all as specified and directed., removing excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 50 metre above the starting point complete all as specified and directed., refixing/relaying of old retrieved steel tubing in new or old position with and including new gi fittings (connections) and as per site requiremen laid in trenches, above ground level or in any position of following sizes as under complete all as specified and directed : -, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, taking down unserviceable gi tubing / upvc tubing from any position complete with all fittings & connections from any position of following sizes as under complete all as specified and directed :-, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply and fixing/laying & testing of galvanised steel water tubing, medium grade, isi marked complete with all new galvanized fittings of following sizes laid in trenches/ above ground level or in any position complete all as specified and directed :, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply and laying upvc pipe tubings medium grade pressure rating 10 kgf/cm2 isi mark with all fittings such as elbow, bends, sockets, nipples and union etc and fixed complete laid in trenches or in any other position of following sizes as under complete all as specified and directed , 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply only gi fittings, medium grade, isi marked of following sizes as under complete all as specified and directed :-, union 15 mm dia, union 20mm dia, union 25mm dia, union 32mm dia, union 40mm dia, union 50mm dia, socket 15 mm dia, socket 20 mm dia, socket 25 mm dia, socket 40 mm dia, socket 50 mm dia, reducer socket 40mmx50mm, reducer socket 15mmx20mm, reducer socket 20mmx25mm, elbow 15mm dia, elbow 20mm di

CTN :45515797

18 Jun, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - condemned 11 nos wagon sl no. [1] special repair bcnm1 30069131797, [2] special repair bcnm1 30069160773, [3] er bcnm1 30029160300, [4] er bcnm1 30029160065, [5] ser bcnm1 30079160565, [6] ser bcnm1 30079168493, [7] ser bcnm1 30079161289, [8] wr boxnr 25089600651, [9] cr boxnr 25019660441, [10] er bobrnm1 72029561992, [11] er bcnm1 30029124524. total qty- 11 nos. excluded items of each wagons sl no- 1 to 10 are as follows: 1) wheel set with axle- 04 nos (one no wheel set with axle consists of two wheel disc & one axle), 2) ctrb- 08 nos, 3) bogie - 02 nos, 4) brake cylinder- 01 no, 5) draft gear- 02 nos , 6) coupler body- 02 nos, 7) yoke-02 nos, 8) yoke pin- 02 nos, 9) yoke supporting plate- 02 nos, 10) yoke pin support plate- 02 nos, 11) all sorts of bolster springs, 12) distributor valve (ci)- 01 no, 13) slack adjuster- 01 no, 14) knuckle- 02 nos, 15) anchor plate with safety plate- 02 nos, 16) brake beam complete for casnub bogie- 04 nos, 17) equalising lever with bush- 04 nos, 18) bogie brake push rod- 02 nos. (nb- apm not included as a excluded item as this item is not fitted in the aforesaid wagon and 02 nos hand break wheel deficient of the wagon sl no. 8 & 9). excluded items of wagon sl no- 11 (er-30029124524) are as follows: 1) wheel set with axle- 04 nos (one no wheel set with axle consists of two wheel disc & one axle), 2) ctrb- 08 nos, 3) brake cylinder- 01 no, 4) draft gear- 02 nos , 5) coupler body- 02 nos, 6) yoke-02 nos, 7) yoke pin- 02 nos, 8) yoke supporting plate- 02 nos, 9) yoke pin support plate- 02 nos, 10) all sorts of bolster springs, 11) distributor valve (ci)- 01 no, 12) slack adjuster- 01 no, 13) knuckle- 02 nos, 14) anchor plate with safety plate- 02 nos. (nb- apm- not included as a excluded item as this item is not fitted in the aforesaid wagon). nb: bogie (02 nos) not included in the excluded items of wagon sl no-11 (er-30029124524) as this wagon is fitted with casnub 22w(m)-bogies with wide horn which are no longer in use in any of the current design wagon vide edme/frt/rly bd's l/no-2018/m(n)/60/4, dated-14/11/2019 & this wagon should be sold & disposed with bogies. the wagons will be sold except excluded items mentioned above as per crse/frt/kkk's l/no. mc/300/pt. xx, dt. 10.04.2024. wagons sl no-1 to 10 to be sold without bogies & wagon sl no-11 to be sold with bogies.

CTN :45515798

18 Jun, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - condemned wagon no. cncr-98259060449, type- bfkhn. qty- 01 no. excluded items of wagon no bfkhn-cncr-98259060449 are as follows: 1) wheel set with axle- 04 nos (one no wheel set with axle consists of two wheel disc & one axle), 2) ctrb- 08 nos, 3) bogie- 02 nos, 4) brake cylinder- 01 no, 5) draft gear- 02 nos, 6) coupler body- 02 nos, 7) yoke-02 nos, 8) yoke pin- 02 nos, 9) yoke supporting plate- 02 nos, 10) yoke pin support plate- 02 nos, 11) all sorts of bolster springs, 12) distributor valve (ci)- 01 no, 13) slack adjuster- 01 no, 14) hand brake wheel- 02 nos, 15) knuckle- 02 nos, 16) anchor plate with safety plate- 02 nos, 17) brake beam complete for casnub bogie- 04 nos, 18) equalising lever with bush- 04 nos, 19) bogie brake push rod- 02 nos. (nb- apm- not included as a excluded item as this item is not fitted in the aforesaid wagon). the wagon will be sold except excluded items mentioned above as per crse/kkk's letter no mc/300/pt.xx, dated- 10.04.2024. wagon to be sold without bogies. excluded items as mentioned above are to be returned to the custodian by the purchaser during return over programme.

Co-operative

CTN :45474707

23 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For c.i. item on conversion/supply basis - c.i.pipe with standard thickness & flange as per i.s.i. specification machined from dia 4" to 12"(i) new material supply basis, (ii) on conversion basis, c.i. bend, duck foot bend, cross,tee and other such part all size as per drg.(i) new material supply basis, (ii) on conversion basis, c.i.drum, rod,bush, bari,idler pully, break drum for cane unloader etc as per drg.(i) new material supply basis, (ii) on conversion basis, c.i.coupling from 4"dia to 10"dia plane/flange type(i) new material supply basis, (ii) on conversion basis, c.i. firing frame,door side chamber, bagasse rotary chuts, rotary feeder drum , clit, hanger, beam, gutka, furnace nozzle, clam etc. and other such parts for lipi/taxmaco boiler as per different drg.high chrome grade 25 , casting & machined temp. capacity 15000 c(i) new material supply basis, (ii) on conversion basis, c.i. clamp/ hanger clit small size for lippi boiler no. 3 as per drg. blr-79 high chrome grade 25 , casting & machined temp. capacity 15000 c, c.i scapper mixed with pig iron and having standard hardness dully machined as per drg.no.mh-66 ( r)(i) new material supply basis, (ii) on conversion basis, (iii) grooving of c.i.scrapper as per drg., centrifused casted c.i.coupling for fmg gear of kcp mill od 1000 mm.pcd 815(18 holes)9+9,with machining complete as per drg.no.mh-93, c.i.motor cover for different type motor, mill setting bolt & nut for kcp mill drg.no.mh-106, mill setting bolt & nut for taxmaco mill drg.no.mh-38, c.i.worm and worm wheel for crystilizer as per drg.bh-39 ( r ) machined, c.i.worm and worm wheel for vertical crystilizer no. 2 complete set as per drg. machined, eccentric shaft and eccentric for hopper as per drg.no.bh-60, m.s.shell for under feed roller as per drg.mh-95.length 1525 mm.od 750mm,thickness 18mm, c.i. muff coupling for cane unloader as per drg.no cu-25, c.i.gear for magma mixture as per drg.no bh-137.od 450mm,no.of teeth-51.bore 70mm, width 63mm, c.i.brake drum for s.d.centrifugal machine taxmaco make duly machined(i) as per drg.no. bh 81/1, (ii) as per drg.no bh-81/2, c.i.v-belt pully of cont.centrifugal machine duly machined, c.i.scale seat for juice weighing scale duly machined and drilled as per drg.no.mh-195, id fan pully (as per drawing no. bl-r-128/2024-25), id fan motor pully (as per drawing no. bl-r-129/2024-25), boiler grate bar material-cont iron. (as per sample/drg.), boiler furnace manage gap bar. (ap per sample/drg.), chief engineer

Central Government And Public Sector

CTN :45473049

18 Jun, 2026 NA

Nagpur - Maharashtra

Tender For supply of engine oil api 15 w 40 ci 4 plus specification : a) valvoline premium blue 7800 plus , make - valvoline or b) servo pride supereme plus, make- indian oil corporation ltd or c) milcy no. 1 plus ,make hindustan petrolum corporation ltd or crb turbomax 15w 40 , api ci4 plus , make -castrol as per drg.no. na as per specn. a)valvoline premium blue 7800 plus , make- valvoline, or b) servo pride supereme plus,make: ioc ltd.,or c) milcy no. 1 plus ,make : hpc ltd.,or d) crb turbomax 15w 40,api ci4 plus,make-castrol. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45326467

15 Jun, 2026 14.21 Lacs

Bhandara - Maharashtra

Tender For corrigendum : annual item rate contract for maintenance of ci and gi pipe lines for ensuring unintrrupted water supply to various chemical plant inside factory at o.f.bhandara

Central Government/Public Sector

CTN :45473382

03 Aug, 2026 NA

Bengaluru - Karnataka

Tender For supply of engine oil sae 15w 40 api-ci-4 plus grade lubricant oil. brand: valvoline premium blue 7800 plus of m/s. valvoline cummins (p) ltd., or equivalent brand from m/s. greaves cotton ltd., m/s. koel , m/s. hpcl, m/s. bpcl or m/s. iocl. suitable for cpcb-i and cpcb-ii compliant diesel engines. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45453617

06 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply of hi lube oil api ci 4 plus grade lubricant oil suitable for cpcb-ii complaint diesel engines of m/s. cummins, greaves cotton and kirloskar diesel engine of power car. make: vovoline/ iocl/ bpcl/ hpcl or any other equivalent make recommended by the engine manufactures of power car. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

Central Government And Public Sector

CTN :45454417

29 Jun, 2026 NA

Raipur - Chhattisgarh

Tender For supply of engine oil api 15 w 40 ci 4 plus specification : a) valvoline premium blue 7800 plus , make - valvoline or b) servo pride supereme plus, make- indian oil corporation ltd or c) milcy no. 1 plus ,make hindustan petrolum corporation ltd or crb turbomax 15w 40 , api ci4 plus , make -castrol as per drg.no. na specn: a)valvoline premium blue 7800 plus , make- valvoline, or b) servo pride supereme plus,make: ioc ltd.,or c) milcy no. 1 plus ,make : hpc ltd.,or d) crb turbomax 15w 40,api ci4 plus,make-castrol. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45194659

08 Jul, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For corrigendum : supply of set of coupling cock consists of 02 items for memu. (1). coupling cock size3/4" type bl for mr pipe between mr pipe and isolation cock as per wsf part no. ib 70380/1, or equivalent of m/s recon engg. or equivalent of m/s escorts ltd. with handle(item 2) as per rdso drg. no. cg-k 7095 alt 3. (2). coupling cock type br 1" for key operation ci. body assy. wsf part no. ib 70381/1 or equivalent of m/s escorts ltd or equivalent of m/s racon engg. with handle(item2) as per rdso drg. no. cg- k 7095 alt-3. [ warranty period: 30 months after the date of delivery ] ]

Ci Fitting Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Co-operative

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector