Latest ci pulley scrap Tenders | Government ci pulley scrap Tenders

corporations/Associations/Others

CTN :40521256

09 Jun, 2025 64.39 Lacs

Bokaro - Jharkhand

Tender For supply of spare for coal feeder and conveyor body liner for coal mill ctps - weigh span roller assy , weigh roller assy , coc chain assy , inlet skirt assy , inlet span roller assy , drag housing with cover , head pulley of feeder , tension roll pulley assy , weigh sensing system , mixing box de , mixing box nde , conveyor body liner de

State Government

CTN :40534123

05 Jun, 2025 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of c.i./c.s. casted item - c.i. casted items on new basis, c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling different size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, c.i. casted items (on conversion basis), c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling difrent size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, cast steel spur gear & pinion new basis, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) material 2708, c.s.sproket-36 teeth for duplex chain 2 1/2" pitch material 2708 drg no ksc/boiler-163, c.s. sprocket 17 teeth for duplex chain 2 1/2" pitch material 2708 drg no-ksc/mill/4887, opertuinity device of trash turner beam material-ss drg no. mills-8488, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-10, fw-110mm od-260mm bore-50mm, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-8, fw-120mm od-208 mm bore-50mm, c.s.worm shaft ( as per sample) for mill, c.s. mill coupling (weight 700kg approx) as per drawing, c.s. mill crown pinion 16 teeth (weight 1500 kg.) as per drawing, cast steel spur gear & pinion on conversion basis, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) material 2708, c

CTN :40540480

20 Jun, 2025 NA

Delhi - Delhi

Tender For supply of centrifugal oil filter assy , 52z8160123 hose , cpf0910813 nipple , cfn0120868 nut , cfb0121250 bolt , 30z7111786 flange coupling , 42z7112813 nut , 30z7111778 coupling disc , 30z7181762 flex plate assy , 728601963 hose , 30z2180384 hose , 30z2180392 breather assy , 30z2180335 cap assy , 30z2180595 gauge level , cfb0221000 bolt , ccc0106015 clamp , ccc0103008 clip , 31z6190173 clip , cfs0130830 bolt , 31z2190052 clip , 30z2100403 cover assy , 31z1210032 spacer , 30z2110164 bolt , cfb0221035 bolt , 30z2190347 chain , 33z2100014 oil filler , 30z2110059 spacer , 30z3100243 bearing main std 1 eng set , 30z3100292 bearing main us 0 point 25 1 pair , 30z3100324 bearing main us 0 point 50 1 pair , 30z3180134 main bearing thrust , 30z3100413 bearing thrust os 0 point 25 assy , 105151430 bolt , 30z3150075 crankshaft , cfp0401228 dowel pin , 30z3190227 key , 30z3180734 dumper asy , 30z3150083 gear crankshaft , 30z3140063 pulley , cfs0131225 screw , 31z2140156 cylinder liner , 807310505 switch , 30z2180351 bushing camshaft , 31z2130096 nozzlepiston cooling , 31z2110072 pin , 31z2100028 cylinder block assy , 30z2160303 o ring liner upper , 30z2160296 o ringliner lower , 30z2160311 seal liner crevice , 30z5110201 bolt , 30z2110107 bushing , cfp0400514 dowel pin , cfp1304008 pin spring , 704012414 plug , 704013016 plug , 30z2110083 bolt , cfp0400820 dowel pin , cfw0516045 washer , 30z1180269 valve exaust , 30z1180399 valve intake , 30z1180244 seat exaust valve insart , 30z1180252 seat intake valve insert , 30z1140376 guide int valve , 30z1110081 spring valve ex , 30z1100029 gasket head , 30z1110049 cotter valve , 30z1110057 guide int valve , 30z1110065 bolt , 30z1150209 cross head , 30z1100037 cross head assy , 30z1100434 cyl head asy less valve , 30z1110121 nut , 30z1110113 screw , 30z1120158 sleeve nozzle holder , cfb1751045 bolt , 30z1310013 nut , 30z1340098 manifold exhaust front , 31z1340095 manifold exhaust mddle , 30z1340105 manifold exhaust rear , 10z1330036 clamp , 158221411 nut , 32z1100015 pipe exhause , 2447222125 hand priemer , 1230203001 sealing ring for 13 and 15 , 2440105000 sealing ring for 4 , 2443203001 valve , 2444615006 spring , 51z3250376 gear ring , cfb0121685 boit , cpl0111521 plug , cfb0721845 bolt , 31z3200138 fly wheel assy , cfw0518045 washer , cfb0721855 bolt , 30z2380179 seal front , 30z2380187 bushing , 30z2380195 bushing , cfp1305012 pin spring , cfb0121075 bolt , cfb0121065 bolt , cfb0121070 bolt , 30z2310031 dowel pin , cfb0721460 bolt , 30z2300011 gear assy , 30z2310072 shaft , 30z2310089 washer , cfw0610032 washer

CTN :40522801

19 Jun, 2025 NA

Kalyani - West Bengal

Tender For supply of 2 ton chain pulley, chain pulley block tested to 50% overload capacity with maker s test certificate

CTN :40528327

12 Jun, 2025 NA

Pilibhit - Uttar Pradesh

Tender For competitive e-bidding for supply of lifting material for bisalpur kisan sahkari chini mills ., ltd., bisalpur ( pilibhit ) for the season 2025-26 - heading, usha martin make steel wire rope hemp core tested quality having tensile strength of 180kg.n/mm squ. confirming to is-2266/89 ,with test certificate.(6/19 material construction) -size-3/4 , but -size-3/8 , shalimar make manila rope mufd.to is/bs specification with test certificate .size 3/4", shalimar make manila rope mufd.to is/bs specification with test certificate .size 1", heavy duty poly propylene rope 3stand hawser laid, tuff make, tested quality, with test certificate. size 1 / 3/4 , heavy duty nylon rope 3stand hawser laid, tuff make, tested quality, with test certificate. size 1 , usha martin make wire rope sling as per above spec. with both end sealed looped in o shape 12 length for 15 tone load crane hook grip. with test certificate size 3/8 x 4 met., but size 1/2 x 02 met., but size 1/2 x 04 met., but size 5/8 x 03 met., but size 3/4 x 11 met., but size 1.1/2 x 04 met., u clamp forged steel for 1/2 rope., but for 3/4 rope., indef make chain pulley block with 15 met. tested lift chain capacity. with test certificate. capacity --01 tone. heavy duty-p series, but 02 tone with 15 met. tested lift chain heavy duty. p series with test certificate., but 03 tone with 20 met. tested lift chain heavy duty. p series with test certificate., but 05 tone with 20 met. tested lift chain heavy duty. p series with test certificate., indef make extra tested lift chain for above chain pulley block. heavy duty-p series

Central Government/Public Sector

CTN :39875422

31 May, 2025 NA

Bhopal - Madhya Pradesh

Tender For bid to ras supply of gear travel trolley 2 tonne as per annexure-a. pre dispatch inspection & proof load test of all quan , gear travel trolley 3 tonne as per annexure-b. pre dispatch inspection & proof load test of all quan , chain pulley block 3 tonne as per annexure-c. pre dispatch inspection & proof load test of all quant

Central Government/Public Sector

CTN :40492913

18 Jun, 2025 NA

Duliajan - Assam

Tender For supply of chain pulley block- 3ton , chain pulley block- 5ton

Central Government/Public Sector

CTN :40267024

03 Jun, 2025 NA

Raichur - Karnataka

Tender For corrigendum : supply of spare parts for tractors - bearing assembly , filter power string tank , rubber sleeve, d31 35 l 75 , rubber spacer , o ring , cable assembly battery to starter , tube fuel length 1400 , steering cylinder child parts , cable battery to ground , cable battery to starter or , cable battery pos , pipe assy remote valve port b , pipe assy remote valve port a , fuel fiter primary grey , fuel filter secondary grey , eng oil filter grey , cap assy with seal , kit filter 3630 5500 7500 , lynch pin , pin top link , cylinder delivery connector l 37 , thermostat , pipe water seprator to feed pump , pipe feed pump to filter , pipe filter to fip , turn signal switch , knob dsent control , lever gear shift range , hood rear lower panel rh , hood rear lower panel lh , harness engine , rear hood dash panel , hood rear centre panel , bracket assy pipe holding , gaurd, assy cylinder , main harness , bracket mtg uhm , gear hydraulic pump , draft sensing linkage , hydraulic piston , hydraulic cylinder , block , roll pin , fan belt alternator 3510 to 4510 , fan belt, water pump 3510 to 4510 , tensioner assy with pulley , gasket strg hyd pump , hose hydraulic suction , dipstick lubricating oil sump assy with o ring , drain plug fuel sedimentor , pre cleaner assembly small glass 4710 excel , body pre cleaner , hose hydraulic pipe inlet , air cleaner assy 8 inch dry , front pipe assy with tap off valve , element air cleaner , seal air cleaner , rubber seal air cleaner , seal hydraulic piston , hose oil tank steering l 140 , top link assembly , dash pannel assembly , fusible link cable , harness main , lever gear shift , flexible tubing l 262 , hyd oil filter long only for ndl , pin , differential assy ndl kit , fuel feed pump t 3 new , plate , allen screw m8 20 , recovery tank , clamp hose 60 80 mm , kit seals , harness head lamp new , bracket new remote valve , check chain assembly , hood rear left panel , hood rear right panel , bracket side panel lh , bracket side panel rh , link assy lower , seat sliding w o arm rest and belt grey , seal , brkt battery mtg , pin assy lower link mounting , hose , bracket water seperator ps , coupling quick , cable throttle control , allen screw m10 1.25 85 , lower link 3510 to 4510 , lift rod assembly lh , levelling box assembly rh , o ring 3.53 245 bi housing , boot gear lever , recovery bottle assy new , screw connecto ss 10181711 , ring antiextrusion , light switch , switch ignition , screw hex soc , clamp tie l 289 , spring gear shift , pin upper lift rods , pin lower lift rods , spacer , pin check chain d14 , oring , fuel cock assy , washer , pipe filter to feed pump , pipe filter to fip inlet , bellow transmission lever , knob engine shut off red , rod battery hold down yoke , copper washer m12 18 1.5 , washer 10.5x18x2mm , nut m16x1.5x13 , bolt m16x1.5 rim to disc , fork pin release control link , flexible tubing fuel l 406 , screw tapping , connector braze , banjo bolt ss 4864083 , pin gear shift linear motion , washer 8x17x2 , pin cotter 2x22 , bolt m6x1.0x18 , hex head screw m5 x 18 , plain washer 6.15x15x1.5 , worm drive clamp 20x32mm , nut rad , cable tie l 178 , plug , nut m6 1 , clamp constatnt tension fuel new , split pin , pin d22 66 , nut p t non mtl m5 8 znd , spring nut self tapping screw , hair pin , pad rubber , worm drive clamp , bracket f plug n 8 , copper washer , banjo bolt , banjo washer , screw 8 18 2 pan head tap

State Government

CTN :40227801

10 Jun, 2025 49.58 Lacs

Gandhinagar - Gujarat

Tender For corrigendum : various routine/preventive and breakdown maintenance work on as and when require basis at chp-gtps - replacement of hammer rings for stage ii crusher , replacement of hammer rings for stage i crusher , replacement of screen plate / breaker plate/kick off plate of stage i and ii crushers , replacement of rotor of stage i crusher with disassembling of removed rotor and assembling of new/repaired rotor , replacement of drive end side bearing / pedestal of crusher rotor or complete gear coupling set of crusher or repositioning of dislocated rotor of crusher , replacement of non drive end side bearing/pedestal of crusher rotor or complete alignment of crusher motor with crusher rotor , replacement of broken hammer rings of stage i and ii crushers (stage i crusher up to 12 nos.of hammer rings and stage ii crusher up to 06 nos. of hammer rings at a time) , replacement of rail of rail table of wagon tipplers 1/2/3/4 (in one side full length) , replacement of clamping rubber pads of clamp for wagon of wagon tipplers , replacement of whole resting pads for wagon of side beam of wagon tipplers , replacement of spill plate roller of wagon tipplers , repairing/preparation/ fitting and replacement of hooks/rods/turn buckle, chain, sling rope ,spring assembly etc. of vibrating trays and crusher house trays , spillage control at various locations , miscellaneous cutting/welding work require at various locations , replacement of gearbox in conveyor no. 2a/b,11a/b,12a/b,13,14/15,16a/b,17a/b ,18a/b,drc/apron/rg/,wagon tipplers,stacker-reclaimer , replacement of gearbox in conveyor no.,5a/b,8a/b,10a/b,shuttle conveyor 1/2,belt feeder 1/2 ,roller screen, mrc 3/4/5,wobbler feeder ,dribble conveyor 1/2 , replacement of slow speed coupling set (two halves) of drive pulley , replacement of coupling bolts and rubber bushes of slow/high speed coupling(input/output coupling ) in conveyor no.2a/b,11a/b,12a/b,13,14/15,16a/b,17 a/b,18a/b,drc/apron/rg/,wagon tipplers,stacker-reclaimer , replacement of coupling bolts and rubber bushes of slow/high speed coupling(input/output coupling ) in conveyor no.,5a/b,8a/b,10a/b,shuttle conveyor 1/2,belt feeder 1/2 ,roller screen, mrc 3/4/5,wobbler feeder ,dribble conveyor 1/2 , replacement/removing/refitting of various size and type of fluid coupling , replacement or removing & refitting of any internal/bearing/input/ output oil seal of various size and type of gear box , overhauling of dismantles old/used gearbox in all respect with fitment of input and output coupling. , replacement of drive pulley , replacement of drive end side bearing of drive pulley or repositioning of dislocated drive pulley , replacement of non drive end side bearing/any side pedestal of conveyor drive/non drive pulley , alignment of motor/ gearbox/drive pulley including decouple/couple of coupling , nut bolt and drive system checking with replacement of broken nut bolt in all 04 wagon tipplers no.1/2/3/4 as per scope , lifting and releasing of gravity take up of any conveyor belt for locking and de locking of belts for other than belt replacement work , loosening and tightening of horizontal type screw take assembly of any conveyor belts for other than belt replacement work , work of dismantling and re erection of new/repaired apron pan from existing apron feeder of wagon tippler , repairing of upper/lower structure/cone plates of damaged/bend apron pan , replacement of carrying roller of apron feeder , replacement of worn out/ damaged ti roller and garland rollers. , replacement of worn out/ damaged impact rollers , replacement of worn out/ damaged return rollers , replacement of various worn out/ damaged ti roller stands , replacement of various worn out/ damaged impact roller stands , replacements of various worn out/ damaged return roller stands , replacement of various worn out skirt rubbers [10 m each] and skirt rubber with angle , preparation and replacement of guide rollers with bracket in place of worn out/ damaged gu

Central Government/Public Sector

CTN :40469100

14 Jun, 2025 NA

Raigad - Maharashtra

Tender For supply of lg glass and gasket tools - reflex lg glass a7 with gaskets-map , gasket for reflex type lg size-a7 - map , torque wrench , range - 20-100 , 1/2inch sq drive box spanner set , box spanner set , chain pulley block light weight 1t x 3me , d.shakle scr 1 mt , flat webbing sling , 1t x 2me

Ci Pulley Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector