Latest ci rod Tenders | Government ci rod Tenders

corporations/Associations/Others

CTN :40126145

05 May, 2025 2.62 Lacs

Pimpri - Maharashtra

Tender For 22/2025-26 purchase of laqshya instruments - purchase of instruments ( laqshay), radiant warmer- technical specification of radiant warmer with baby bassinet a radiant warmer is used to keep the patient s core temperature stable at 37 o c. it should be microprocessor controlled radiant warmer with manual and servo options. it should have facility to display both skin and air (ambient) temperature separately.. it should have audiovisual alarm facility for overheating beyond set temperature range. it should have alarm facility for patient temperature less than or greater than the required temperature i.e. above or below the set range. it should rotate and swivel in different direction, so as to allow taking x-ray. the light should be dazzle free. it should have alarm for power failure. it should have alarm for heater failure and auto cut off for high temp. it should have alarm for probe failure. it should have time out alarm in manual mode. it should have facility to auto reset the system in case of hang up caused by power fluctuation. it should have manual setting for high and low alarm setting. in servo mode, the heater output should be controlled to maintain the baby at the required set temperature. in manual mode, the heater output should be directly controlled by a setting on the front panel should have a facility to lock the keyboard to avoid unwanted user. the desired temperature range from 25 to 40 degree c. the resolution should be 0.1 degree c halogen based observation light should be provided for observing the baby. it should be mounted on a pole with sturdy base with lockable castors power supply: power input to be 220-240 vac, 50hz fitted with indian plug. certificate of calibration and inspection from the factory. warranty: comprehensive warranty for 5 years after warranty documentation: user, technical, maintenance manuals to be supplied ce, iso certified , fetal doppler - technical specification of fetal doppler should be compact, table type and light weight. large lcd display for display of fetal heart rate. back light for better visibility display signal quality, low battery, etc., high sensitivity doppler probe of frequency 2.0 mhz ultra sound intensity 10mw/cm2. built-in speaker with output not less than 1.0w should work on rechargeable batteries with minimum battery time of 300minutes. battery charger and spare set of batteries aa type to be supplied. volume control facility and audio output for ear phone should be available. heart rate range should be from 50 to 240 b pm with accuracy of + /-2% should be water proof body. should have facility for fhr data transfer to pc. doppler probe should be light weight with holder facility when not in use. should be supplied with carrying case. machine should be iso mark, baby digital thermometer - technical specification of baby digital thermometer range 0.1 to 1000 degree centigrade measurement mode- min, max, average, differential, dual temperaturereading measurement unit- degree centigrade, degree fahrenheit,kelvin temperature probe with connecting cable relative humidity10 to 90% rh non-condensing ip rating- ip 40 g) probe response time 2-3 seconds it should be who & unicef standards, delivery trolley/patient stretcher trolley- technical specification of patient stretcher trolley overall size: 1905mm l x 710mm w x 660mm to 910 mm h. stretcher dimension 1830 mm l x 555 mm w. two section top. height adjusted by foot operated maintenance free hydraulic pump. height adjustment shall be obtained by hydraulically operated mono block type linear actuator pump foot operated actuation having stroke of 140 +/- 5 mm, push force 10 kn at 270 bars, number of complete pump stroke 22 to 24 for full stroke length x-ray permeable removable stretcher, backrest raised on ratchet. quick trendelenburg as well as reverse trendelenburg positions shall be provided with easily accessible operating handle provided with two gas springs for easy action. s.s. saline rod with 12 mm dia s.s

corporations/Associations/Others

CTN :40126147

05 May, 2025 2.62 Lacs

Pimpri - Maharashtra

Tender For 22/2025-26 purchase of laqshya instruments - purchase of instruments ( laqshay), radiant warmer- technical specification of radiant warmer with baby bassinet a radiant warmer is used to keep the patient s core temperature stable at 37 o c. it should be microprocessor controlled radiant warmer with manual and servo options. it should have facility to display both skin and air (ambient) temperature separately.. it should have audiovisual alarm facility for overheating beyond set temperature range. it should have alarm facility for patient temperature less than or greater than the required temperature i.e. above or below the set range. it should rotate and swivel in different direction, so as to allow taking x-ray. the light should be dazzle free. it should have alarm for power failure. it should have alarm for heater failure and auto cut off for high temp. it should have alarm for probe failure. it should have time out alarm in manual mode. it should have facility to auto reset the system in case of hang up caused by power fluctuation. it should have manual setting for high and low alarm setting. in servo mode, the heater output should be controlled to maintain the baby at the required set temperature. in manual mode, the heater output should be directly controlled by a setting on the front panel should have a facility to lock the keyboard to avoid unwanted user. the desired temperature range from 25 to 40 degree c. the resolution should be 0.1 degree c halogen based observation light should be provided for observing the baby. it should be mounted on a pole with sturdy base with lockable castors power supply: power input to be 220-240 vac, 50hz fitted with indian plug. certificate of calibration and inspection from the factory. warranty: comprehensive warranty for 5 years after warranty documentation: user, technical, maintenance manuals to be supplied ce, iso certified , fetal doppler - technical specification of fetal doppler should be compact, table type and light weight. large lcd display for display of fetal heart rate. back light for better visibility display signal quality, low battery, etc., high sensitivity doppler probe of frequency 2.0 mhz ultra sound intensity 10mw/cm2. built-in speaker with output not less than 1.0w should work on rechargeable batteries with minimum battery time of 300minutes. battery charger and spare set of batteries aa type to be supplied. volume control facility and audio output for ear phone should be available. heart rate range should be from 50 to 240 b pm with accuracy of + /-2% should be water proof body. should have facility for fhr data transfer to pc. doppler probe should be light weight with holder facility when not in use. should be supplied with carrying case. machine should be iso mark, baby digital thermometer - technical specification of baby digital thermometer range 0.1 to 1000 degree centigrade measurement mode- min, max, average, differential, dual temperaturereading measurement unit- degree centigrade, degree fahrenheit,kelvin temperature probe with connecting cable relative humidity10 to 90% rh non-condensing ip rating- ip 40 g) probe response time 2-3 seconds it should be who & unicef standards, delivery trolley/patient stretcher trolley- technical specification of patient stretcher trolley overall size: 1905mm l x 710mm w x 660mm to 910 mm h. stretcher dimension 1830 mm l x 555 mm w. two section top. height adjusted by foot operated maintenance free hydraulic pump. height adjustment shall be obtained by hydraulically operated mono block type linear actuator pump foot operated actuation having stroke of 140 +/- 5 mm, push force 10 kn at 270 bars, number of complete pump stroke 22 to 24 for full stroke length x-ray permeable removable stretcher, backrest raised on ratchet. quick trendelenburg as well as reverse trendelenburg positions shall be provided with easily accessible operating handle provided with two gas springs for easy action. s.s. saline rod with 12 mm dia s.s

Central Government/Public Sector

CTN :40132540

22 Sep, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of 25 kv operating rod in four sections of total length 6.50 mtrs with top clamp for bird nest removal as per rdso specification no. eti/ohe/51(9/87) rev- 1 (october-1992) or latest.

Central Government/Public Sector

CTN :40132531

27 Aug, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For supply of set of operating device arrangement for cbc assembly as per sr.dee/rs/nr/ gzb drg. no. 214/3 phase/2010 sheet no. 1 & 2 alt-1. one set consists 10 items 13 nos as per sr.dee/ rs/nr/gzb drg. no. 214/3phase/2010 sheet no. 1 & 2 alt-1(1) operating rod with handle qty-01 no. (2) cbc opening rod qty-01 no.(3) bracket short qty-01 no.(4) bracket long qty-01 no.(5) locking piece qty-01 no.(6) special screw qty. 01 no.(7) make up piece qty. 01 no. (8) screw m-6x85 lg qty-02 nos.(9) nut hex m8 qty-02 nos.(10) allen bolt m8x20 lg qty-02 nos

CTN :40008388

10 May, 2025 NA

Udhampur - Jammu And Kashmir

Tender For corrigendum : procurement of mt spares - mg spares part :, bolt, bolt frt hood hinge, bolt, bolt, bolt no 2, screw, screw, screw, screw, screw, screw, screw, screw, pin, ball, ball, ball case, nut, nut, nut, washer, lock washer, key, bolt no 2(8x120), bolt (10x18.5 ), bolt no 1 (8x100), screw, bolt lever locating (10x18.4), nut, nut rh, nut lh, nut, nut, thrust washer no.3 (t. o.8), thrust washer no 2(t 0.7), thrust washer no 1(t 0.6), thrust washer no.2 (t :1.0), thrust washer no 3(t:1.1), thrust washer no1 (t :0.9), (deleted) lock washer, washer, thrust washer, washer, washer t/m oil level plug, gasket, gasket, spacer (8x12x15), spacer, shim (t.1.15), shim (t-1.18), shim (t.1.21), shim (t.0.30), spring pin reduction frok, pin, spring pin gear, plug oil filter, plug oil level, plug, cap choke cable, plug timing belt outside cover, roller shaft sft interlock, bearing frt wheel, o ring, o ring distributor case, o ring guide oil level gauge, o ring, o ring oil strainer, o ring, oil seal, oil seal, oil seal, seal valve stem, bush, bush sprg shackle, cushion front, cushion case, hose water by pass, circlip axle shaft, circlip main shaft rr, circlip, e ring, clip heater hose, clamp, clamp heater hose, spring inner, spring outer, spring select return, spring axle housing breat, absorber assy rear shock, absorber assy front shock, spring, spring, bulb (12v 3.4w), bulb(12v 1.4w), bulb turn signal (12v 21w), bulb 12v 21/5w, bulb (12v 5w), bearing input shaft, pully crank timing belt, tensioner comp timing belt, gangue water temperature, gauge assy water temp, head lamp assy, lamp assy fornt fog, lamp assy comb rh, boot lever no1, shaft input, shim input shaft (t:0 3), gear counter, shaft counter, retainer output shaft, shim output shaft (t:0.1), shim output shaft (th:0.3), support open spring, latch assy front door rh, latch assy door rh, (deleted) latch assy front door lh, latch assy door lh, handle lock, cover gate handle, stricker lock, spacer, handle inside rh, handle inside lh, regulator assy frt dr window lh, joint rubber, bush column, rubber seal, dumper assy steering, connector tie rod end, tie rod steering, (deleted) rod assy steering drag, pad, (deleted) piston/cup set, bulb head lamp 12v 45/ 40w, fuse 15 amp, spark plug (champion rc 8 yc), spark plug, jet second, jet pilot, wrench spark plug, light assembly indicator, lens rh, lens lh, lens turn signal, lens tail stop, lamp assy room, lens back up rh, lens back up lh, harness assy wiring no.2st, harness assy wiring no.2, weather strip door outer, strap inside, scrape inside, glass wind shield, glass front door rh, glass front door lh, weather strip wind shield, weather strip door rh, trim operating extension assy, weather strip door lh, hub front drive clutch, sleeve front drive clutch, fork front drive shifting, handle jack, checking tool set, 3m way joint & hose, gasket & reservior, washer fr disc flexible hose, spring hold down, piston cup/boot set, spring tensioner, valve intake, valve exhaust (4 valve mpfi), seal valve stem, weather strip back door opening, mirrror assy out rear view rh, mirror assy inner rear view, cushion assy rh front soft top, cushion assy lh front soft top, back assy rh, back assy lh, tie rod end remover, bearing installer, steering pinion bush, side brg remover, wrench oil filter, oil pressure gauge, fork reduction shifting, boot lever no.1, gear speedometer drive, bolt spdom drive gear, pin, tank assy fuel, jack assy, jack assy, weather strip door rh, wheather strip back door, liquid gasket three bond 1207c, engine valve set of inlet and exhaust, shoe set rear brake, spring shoe return no.2, lock assy steering, switch assy change over, switch assy backup lamp, switch 4 wheel drive, switch assy stop lamp, switch assy oil pressure, gasket case front, mounting rh front/lh, mounting rh rear, nut, washer, spacer, oil seal, oil seal, o ring, o ring, spring, carburator assy, valve assy needle, float, jet assy slow, valve lifter, piston ring comp

CTN :40073481

13 May, 2025 NA

Dewas - Madhya Pradesh

Tender For tender for purchasing electrical material required for street lighting maintenance on empanelment basis - details, , (for both lt line & ht line), 8 ,, , 12 , , 25 , commercial and industrial fixed ladder 30 ft, folding aluminium ladder 20 ft, , 900 , , (for both lt & ht ), 150 . . , 400 . . , , earth discharge rod (lt & ht), arc flash suit (lt & ht), hot stick (insulated operating rod), faceshield & safety goggles, rubber mat/electrical insulated mat, 1000 , / , meco model : 3600 - 1200a dc & 1000a ac(trms), 3 digit 3999 counts, 40 segment bargraph, auto - ranging, peak hold, max, ?zero, data hold functions, apo ), , , ( )(for both lt & ht), do rod (ht) required size and shape, do wire (ht) required size and shape, energy saving t5 rod 24 watt, energy saving t5 24 watt electronic chock., energy saving t5 24x2=48 watt electronic chock., energy saving t5 holder 24 watt., energy saving t5 fitting (2x24 watt) with choke but without lamp., energy saving t5 fitting (2x24 watt) with lamp and choke complete., energy saving t5 fitting (2x24)watt without rod and choke., energy saving t5 fitting (4x24 watt) with choke but with out lamp., energy saving t5 fitting (4x24 watt) with lamp and choke complete., energy saving t5 fitting (4x24)watt without rod and choke., energy saving p.l. rod 36 watt., electronic pl 36 watt choke., energy saving p.l. holder 36 watt., energy saving p.l. fitting (36 watt) with choke but with out lamp., energy saving p.l. fitting (36 watt) with lamp and choke complete., energy saving p.l. fitting (36 watt) without rod and choke., energy saving p.l. fitting (2x36 watt) with choke but without lamp., energy saving p.l. fitting (2x36 watt) with lamp with choke complete., energy saving p.l. fitting (2x36 watt) without lamp and choke., ftl 36 watt tube rod., 36/40 aluminium choke 40 watt., 36/40 watt starter aluminium p.v.c. body., ftl 36 watt tube light fitting with out lamp., ftl 36 watt tube light fitting with., tube light led 20 watt type complete set., tube light led 40 watt type complete set., s.v. fitting 400 watt complete fitting with lamp, choke, igniter, capacitor etc., s.v. 400 watt choke., s.v. 400 watt lamp ., s.v. lamp 250 watt., s.v. choke 250 watt., s.v. fitting 250 watt complete., igniter 70-400 watt., 250+400 watt lamp holder heavy porcelane high quality., capacitor 10 mfd, 15 mfd, 20mfd, 33mfd high quality., aluminum wire bundle heavy duty l-91.44 mtr. (300 feet) , size-16 mm., aluminum wire bundle heavy duty l-91.44 mtr. (300 feet) , size-12 mm., aluminum wire bundle heavy duty l-91.44 mtr-(300 feet), size-10 mm., aluminum wire bundle heavy duty l-91.44 mtr. (300 feet), size-06 mm., aluminum wire bundle heavy duty l-91.44 mtr. (300 feet), size-04 mm., copper wire bundle heavy duty l-91.44 mtr. (300 feet), 1 mm., copper wire bundle heavy duty l-91.44 mtr. (300 feet), 1.5 mm., copper wire bundle heavy duty l-91.44 mtr. (300 feet), 2.5 mm., 23/76 wire bundle copper heavy duty l-91.44 mtr-(300 feet),., 6 sq. mm 2 core copper cable unarmoured, 4 sq. mm 2 core copper cable unarmoured, 2.5 sq. mm 2 core copper cable unarmoured, 1.5 sq. mm 2 core copper cable unarmoured, 1 sq. mm 2 core copper cable unarmoured, 6 sq. mm 3 core copper cable unarmoured, 4 sq. mm 3 core copper cable unarmoured, 2.5 sq. mm 3 core copper cable unarmoured, 1.5 sq. mm 3 core copper cable unarmoured, 1 sq. mm 3 core copper cable unarmoured, 6 sq. mm 4 core flate copper cable unarmoured, 4 sq. mm 4 core flate copper cable unarmoured, xlpe insulated 25 sq.mm cable 4 core armouned, xlpe insulated 16 sq.mm cable 4 core armouned ., xlpe insulated 16 sq.mm cable 2 core armouned., xlpe insulated 16 sq.mm cable 2 core unarmouned., xlpe insulated 16 sq.mm cable single core non armouned., xlpe insulated 10 sq.mm cable 4 core armouned ., xlpe insulated 10 sq.mm cable 2 core armouned., xlpe insulated 10 sq.mm cable 2 core un armouned, xlpe insulated 10 sq.mm cable single core un armouned., xlpe insulated 6 sq.mm cab

CTN :40082116

05 May, 2025 NA

Doda - Jammu And Kashmir

Tender For supply of spares/ stores/t&p/equipments/hardware items required from time to time for day to day operation/ maintenance/construction of power sub-transmission network of this division during the financial year 2025-26 or till the next rate contract - disc insulator 70kn b&s type, anti fog (reputed make/ already use in pdd), 33kv single tension disc fittings [3 bolts] suitable for dog conductor suitable for b&s 70kn disc insulators, 33kv pin insulators (porcelain) 70kn, 33kv g.i. pins (heavy duty), 11kv, 3 core cable kits [heat & shrinkable], a. indoor type, i) 600 mm. sq.single core, i. 400 mm sq., ii. 300 mm sq., iii. 240 mm sq, iv. 185 mm sq, b. outdoor type, i) 600 mm. sq.single core, i. 400 mm sq, ii. 300 mm sq, iii. 240 mm sq, iv. 185 mm sq, 11kv link set [heavy duty] 50*6 mm ( clamping suitable for dog conductor), 11kv l.a [station type]reputed make, 11kv l.a [line type] reputed make, guy wire 7/3.15mm, 33kv guy insulators, manila rope, i) 3/4 inch dia, ii) 1 inch dia, p.p.rope 3/4 dia, m.s. nut & bolts of sizes, i. 3" (full thread), ii. 6" (half thread), iii. 9" (half thread), iv. 10" (half thread), nuts and bolts brass, cork sheet 8mm, aluminum thimbles of sizes, i. 400mm sq, ii. 300mm sq, iii. 240mm sq, iv. 185mm sq, v. 120mm sq, drill bit [heavy duty], i. 16mm dia, ii. 19mm dia, iii.26mm dia, p.g clamps, i) suitable for panther conductor, ii) suitable for dog conductor, p.i clamps [suitable for dog conductor/panther], t clamps [suitable for dog conductor,panther ], brass bush rods of 33/11kv power transformer of sizes, i. hv [m20], ii. lv [m20], 33kv porcelain bushes of 33/11kv power transformer of sizes, i. hv side, ii. lv side, 3 core 11kv xlpe cable, i) 600 mm. sq., i. 400mm sq, ii. 300mm sq, iii. 240mm sq, iv. 185mm sq, v. 120mm sq, copper strip 20x3mm, vacuum interrupter suitable for, i. 11kv (yamuna] breaker, ii. 11kv [pascal] breaker, iii. 11kv (stelmec] breaker, iv. 11kv [schneider] breaker, iv. 11kv [electrifield make]breaker, aluminum bus bar 75x10mm, duck back shoes of different sizes, red oxide enamel paint (asian, nerolac/ berger), al. paint (asian, nerolac/ berger), 1.1kv voltage grade 2.5mm2 copper conductor, pvc insulated control cable conforming to is: 1554-1998, i. 2 core, ii. 4 core, iii. 5 core, iv) 8 core, iv. 10 core, v) 12core, 33kv current transformer of ratio, i. 750/375/5-5-5a, ii. 600/300/5-5-5a, iii. 400/200/5-5-5a, 33kv lightning arrestor [station type] reputed make, 33kv isolators with earthing blade, insulating hand gloves make crystal etc tested for 33kv level, aluminum ladder 9mtr long (folding), bamboo ladder 20 ft long, rubber mat 1mtr x2mtr, 12mm thick, 11kv operating rods, galvanised nuts and bolts of sorts, g.i wire 8 swg, lifting pulling machine 3 ton (make power ,wolf or any standard make), g.i earthing plates 2x2x6mm, pliers (taparia or any standard make), safety vest, safety belt, safety helmet (isi marked), 33kv danger plates complete, multimeter ( standard company make motwane , waco, etc), digital ampere meter [0-200/400 amps.], male contact (crompton greaves & emi make panel), female contact (crompton greaves & eim make panel), tripping coil suitable for 30/36v dc along with plunger for allind, bieco, make breaker, relays digital for vcbs for allind, bieco, easun,electricfield make panel, earth fault relay for vcb/ocb crompton greaves & emi make panel, over current relay for crompton greaves & emi make panel, 11kv ct set for breakers, i) 400-200/5 - 5amp, ii) 600-300/5 - 5amp, iii) 750-375/5 - 5amp, welding electrodes swg 8no as per is: 814 of 2004, maintenance free battery banks 36v ,vrla bank comprising of 18nos of cell [2 volt.100ah cell each] with tray and trolley of hbl,exide or any other reputed make, battery cells 2 volt,100ah(wet cell ) exide make, battery cells 2 volt,100ah (dry cell) exide make, master trip relay b24,110/125 v dc, guy rod complete with turn buckle, straining screws, guy plate etc [20mm] for 33 kv lines, transf

Central Government And Public Sector

CTN :39130329

02 May, 2025 45.35 Lacs

Ramgarh - Jharkhand

Tender For corrigendum : tender for supply of spares for bhel make ht switchgear - close unit assy , 35211001919-v00 , bhel , tripping block assy , 35211001918-v00 , bhel , limit switch , bhel , vcb , tripping spring for 6.6kv bhel , closing spring , 35213030702-v00 , bhel , vcb , top pole head , bhel , vm36 , bottom pole head , 15211001511-003 , bhel , vacuum interrupter , wl35964w , bhel , vcb , motor , vcb , spring charging , 220vac , 11kv , closing coil , 25211001563-009 , bhel , vcb , support insulator , 15211001515-012 , bhel , support insulator , 15211001515-002 , bhel , lever , 25211001510-001 , bhel , vcb , drive link , 25211001513-001 , bhel , vcb , d-lever assy , 25211001508-001 , bhel , vcb , centering ring , 45211001538-002 , bhel , vcb , spherical rod end , 35211001568-001 , bhel , spacer tube , 45211001715-001 , bhel , vcb , support rod , 25211001571-001 , bhel , vcb , compression spring , 35211001561-001 , bhel , auxiliary switch , bhel , vcb , emer tripping assy , 35212001889-v00 , bhel , plug and socket assy , bhel , vcb , slow closing handle , 35212001553-003 , bhel , spring charg hdle , 35211001509-v00 , bhel , bearing pin , bhel , vcb , 11kv , roller , 45211001622-001 , bhel , vcb , dashpot assy , 35211001720-00 , bhel , vcb , clip , 25211001588-001 , bhel , vcb , vm-12 , clip , pin , 25211001588-002 , bhel , vcb , vm-12 , clip , pin , 25211001588-003 , bhel , vcb , vm-12 , clip , 25211001588-004 , bhel , vcb , vm-12 , clip , 25211001588-005 , bhel , vcb , vm-12 , set of clip , bhel , vcb , 11kv , on-off indicator , 25211001578-001 , bhel , truck wheel , 35212001837-001 , bhel , vcb , roller , bhel , vcb , 11kv , shutter lifting , bolt , 35212001880-001 , bhel , vcb , set of pin , bhel , vcb , 11kv , push button , 45211001599-00 , bhel , vcb , damping rubber pad , bhel , vm36 , operating rod , bhel , vcb , vm12 , swing bolt , bhel , vcb , 11kv , rack in orout handle , 25212001515-v00 , vcb , lead screw assy , bhel , vcb , barrier , 35211001541-01 , bhel , vcb , vm-12 , pvc shroud , 35212001603 , bhel , vm12 , pin split , bhel , vcb , 11kv , plunger , 35211001846-001 , bhel , castle lock assy , 35211001930-v00 , bhel , packer cu , 45211001700001 , bhel , shroud , 15212001530-001 , bhel , vcb , vm-12 , poly shroud w ortopcut , bhel , vm12 , door gasket , 45215001674-001 , bhel , vcb , window glass , 45215002002-001 , bhel , vcb , fixed contact set , bhel , cb , 11kv , contact set w orsob , bhel , cb , 11kv , contact set w orsob , bhel , cb , 11kv , fixed contact set , bhel , vacuum cb , 11kv , seal off bushing , 15215001559-00 , bhel , vcb , inter panel b or b , 35215002059-001 , bhel , vcb , shutter assy , 35215001834-v01 , bhel , vcb , limit switch , bhel , vcb , tripping lever orknob , 45219001530-001 , bhel , cleat , bhel , vm-12 , insulating screw , 45215001658-003 , bhel , packer(round) , 45096901507-001 , bhel , al spacer(round) , 45096301554-001 , bhel , support insulator , 15211001515-003 , bhel , sprt channel , 35216601652-001 , bhel , busbar scrw-spl , 45095001554-001 , bhel , shim , 45096601525-001 , bhel , stud , 45216901510-001 , steel , bhel , clamp plate , 35096901504-001 , bhel , packer , 45216901509-001 , bhel , link plate , 45216301533-003 , bhel , barrier , 35215001773-003 , bhel , sealing cover , 35215001774-004 , bhel , busbar joint shroud , 25215001810-v00 , bhel , sprt ch rnd packer , 45096901506-001 , bhel , earthing connection , 35216602174-003 , bhel , slv l orf 0.4x240 , bp2251082069 , pvc , bhel , slv l orf 0.4x128 , bp2251082050 , pvc , bhel , slv l orf 0.4x104 , bp2251082069 , pvc , bhel , sleeve , dia-38 , pvc , bhel , space heaters 75w , bp7049073557 , bhel , bolt hex am12x75-8.8 , aa7111122224 , bhel , bolt hex a m12x65-8. , aa7111124014 , bhel , nut hex a m12-8 , aa7151115040 , bhel , washer spg-12-st , aa7164002070 , bhel , washer mcd13-st , aa7161001072 , bhel , scru hex a m8x30-8.8 , aa7121123134 , bhel , washer spg-8-st , aa7164002053 , bhel , washer mcd 8.4-st , aa7161001056 , bh

State Government

CTN :40049068

14 May, 2025 NA

Birbhum - West Bengal

Tender For supply, delivery and installation of different electro-mechanical accessories at loba pwss under bolpur mechanical division, phe,dte. - supply and delivery at site of following vertical submersible pumping machinery directly coupled with wet winding type suitable size submersible motor with following specification: method of starting : dol / s/d, shaft-s.s, impeller- s.s / crome steel / gm, outlet - 80/100 mm dia motor : operating voltage : 415 ( 10 %), phase : 3ph, 50 hz 6%speed : 2900 rpm, method of starting : s/d(make : ksb / grundfos / texmo / cri / kbl / mbh / or any approved vendor.) ( n.b : manufacturers test certificate along with charecteristics curve and gurantee certyificate have to be submitted at the time of delivery.), a)discharge (q) : 20m /hr.head (h) : 36 mtrs., b) discharge (q) : 27m /hr.head (h) : 42 mtrs., c) discharge (q) : 27m /hr.head (h) : 51 mtrs., d) discharge (q) : 30m /hr.head (h) : 57 mtrs., installation of submersible pumping machinery to newly sunk tubewell along with column pipes (as required), top cover, valves, and specials of above with protection pipe and supply of ms clamp, nut bolt, cable gland socket etc. making inerconnection of the pump delivery line to pump collecting main line near tubewell with supply of all necceasary pipe, reducer/enlarger, gi/ms specials etc. including brick, sand, cement, rod etc and laying & drawing of all actuator cable & cable protection pipe as required and all to complete the job including all connection & testing commissioning as per direction of eic., add: gst @ 18% on sum of item no: 1.00 to 2.00, add: cess @1% on sum of item no. 1.00 to 3.00

Central Government/Public Sector

CTN :39916813

28 Apr, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : supply of seamanship gear items for vc11190-91 - grapnel/creeper with lanyard with suitable bow shackles (0263/721-6113)material: polyproylene lanyard (standards for pp rope: is 5175: 2022)rope length: 40mts; diameter of rope: 16mmgrapnel material: steel, cordage shackles stoppers with bow shackles(25mm)material: polyproylene rope and shacklelength: 2 mts; diameter of rope: 24mm, snatch blocks with straight screw shackles material: wooden / synthetic resin bonded fibre (srbf)to suit diameter of rope: 36mmtest load: 06 to 08 tons, remating line (one end finished with soft eye connected to welling spring hook)material: polyproylene rope (standards for pp rope: is 5175: 2022)diameter of rope: 24mmlength: 220mts;test load for welling spring hook: 6t, straight screw shackle and welling spring hook for retaining pendant.d- shackle (pin size:25mm) and welling spring hook test load: 6t, swivel and non -swivel inglefield clip(brass) for light line rope.inglefield clip(swivel and non swivel): size-12mm, snatch blocks with straight screw shackles material: wooden / synthetic resin bonded fibre (srbf)to suit diameter of rope: 16mmtest load: 02 tons, gunline pendantpp rope with an inglefield clip on one end and a puma plate (brass material) on the other endlength of rope: 50 cmsrope diameter: 12mmpuma plate: brass, modified distance line with a inglefield clip at each endmaterial: polyprepylene rope (standards for pp rope: is 5175: 2022)length: 66 mtsdiameter of rope: 12mmsize of flags 330 mm equilateral triangle.the digits denoting the distances, in meter, are to be painted on both side of the flags each digit is to be 150 mm in height and 15 mm in width., welling spring hookmaterial: carbon manganese steel test load: 1.5 tonsswl: 0.75tons, test weight (with 5 removable discs on a central rod)135 kg, a 1mtr, 1ton swl round sling & appropriate straight screw shackle is to be used to attach the weight to the traveller. load certificates of wire rope, d-shackle to be provided.test load: 2 -3 tons, toggle with lanyardmaterial: woodenlength: 250mm longdiameter: 40mm, distance linebraided polyester with non-rotating inglefield clips at either endsize : 8.5mm dialength: 102mtsmin breaking load: 0.79tons, transfer bag with buoyancy aid arrangementmaterial: flax canvas/waterproof, mail bag with buoyancy aid arrangementmaterial: flax canvas/waterproofdimension: 300mm x 300mm, snatch blocks (to suit 16mm dia rope) with straight screw shackles (size:16mm)material: wooden / synthetic resin bonded fibre (srbf)to suit diameter of rope: 16mmsnatch block proof load: 3.6 tonsstraight screw shackle proof load: 9.5tons, straight screw shackle (d-shackle); pin size : 25 mmproof load: 9.5t, straight screw shackle (d-shackle); pin size :16mmproof load: 3.6t, boat hookmaterial: wooden handle with metallic hooklength: 5mts, emergency tool bagaxe & maul, hammer, hatchet, hand pliers, marline spikes, adjustable wrench,wire/bolt croppers, eye wash bottle & googles (04nos) , moussing wire. above items are to be provided in a waterproof canvas bag., ras signal wands with batteryfilter red, filter green, filter amber (every colour 4 sets), shot mats/ dumping matsmaterial: braided manila size: 3 mts x 3mtsthickness: 40mm(eye rings are to be provided on the four corners of the dumping mat for securing the mat with rope), electronic display board for raselectronic display board should contain 15 characters, each having a letter height of 200 mm , with a keyboard cable connected.color of led: red, station marker boxmaterial: wood/light weight steelthis is a 45 cm (length) x 22.5 mtr (breath) x 45 cm (height) box made of light weight sheet metal. on the top of the station marker box are three coloured lamps (green, red, amber), with shades and having independent operating switches. on the outboard side of the box, three rows of three holes, each measuring 2.5 cm in dia, are to be made. each hole is fitted with its individual hand operated shutter.

Ci Rod Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

State Government

Central Government/Public Sector