Get complete information related to latest Circlip Pliers Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Circlip Pliers Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Circlip Pliers Tenders.
Tender For installation of various instruments at lakhanka and hamirpara irrigation scheme - providing, supplying, installing, testing, and commissioning of a v-notch weir (mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anticorrosion finish. complete in all respects as directed by the engineer-in-charge. (1) 90° v-notch-20 x 40 secticin 15 lit/sec , providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in- charge. , providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc. c) concrete grade 1:2:4 and msa-40mm(graded)
Tender For procurement of auto electrician and electronics trade equipments allen key set of 12 pieces, back probe tools, caliper inside, calipers outside, center punch, dividers, electrician screw driver, hammer ball peen, hands file, logic probe, pliers combination, screw driver, screw driver, scriber, spanner d.e. set of 12 pieces, spanner, ring set of 12 metric sizes, spanners socket with speed, handle, t- bar, ratchet and, steel rule 30 cm inch and metric, steel tool box with lock and, key (folding type), test light, wire cutter and stripper, ac alternator slip ring puller, adjustable spanner, air blow gun with, standard accessories, air impact wrench with, standard accessories, air ratchet with standard, accessories, allen key set of 12 pieces, ammeter, angle plate adjustable, angle plate size, anti theft device, auto electrical test bench, battery -charger, battery terminal cleaner tool, battery tester, belt tensioner gauge, blow lamp, caliper inside, calipers outside, car jet washer, car stereo, chisel, chisels cross cut, circlippliers expanding and, contracting type, clamps c, clamps c, clamps c, cleaning tray, copper bit soldering iron, dc ohmmeter, depth micrometer, dial gauge type 1 gr. a, (complete with clamping devices, and stand), distributor -duel advance type,, reluctance type, dividers, drift punch copper, drill point angle gauge, drill twist, electric soldering iron 230 v 25, watts, electric testing screw driver, electrical horns ( different types ), engineer's square, executive auto electrical tool kit, feeler gauge 20 blades (metric), file flat, file, half round, file, square, file, square, file, triangular, files assorted sizes and types, including safe edge file (20 nos), flat file, flat file, glow plug tester, granite surface plate, grease gun, growler, hacksaw frame adjustable, hammer ball peen, hammer chipping 0, hammer copper, hammer mallet, hammer plastic, hand operated crimping tool (i), for crimping up to 4mm and, (ii) for crimping up to 10mm, hand reamers adjustable, hand shear universal, hand vice, high rate discharge tester (cell, tester), hollow punch set of seven, pieces, insulated screw driver, insulated screw driver, left cut snips, lifting jack screw type, magneto spanner set with 8, spanners, magnifying glass, marking out table, multimeter digital, multi-point fuel injection pump, oil can, oil stone, oscilloscope, outside micrometer, outside micrometer, outside micrometer, outside micrometer, philips screw driver set of 5 pieces, pliers combination, pliers flat nose, pliers round nose, pliers side cutting, portable electric drill machine, portable headlight aiming kit, prick punch, punch letter 4mm (number), scriber, scriber with scribing black, set of stock and dies - metric, soldering copper hatchet type, spanner clyburn, spanner d.e. set of 12 pieces, spanner t. flocks for screwing up, and up- screwing inaccessible, positions, spanner, adjustable, spanner, ring set of 12 metric sizes, spanners socket with speed, handle, t-bar, ratchet and, universal upto 32 mm set of 28, pieces with box, spark lighter, spark plug spanner, steel measuring tape, steel rule, steel rule, straight edge gauge, straight edge gauge, stud extractor set of 3, stud remover with socket handle, surface gauge with dial test, indicator plunger type i.e. 0.01 mm, tachometer (counting type), taps and dies complete sets (5, types), taps and wrenches - metric, telescope gauge, temperature gauge, tester sparking plug 'neon' type, thermostat, thread pitch gauge metric, bsw, timing lighter, universal puller for removing, pulleys, bearings, v' block, vernier caliper, vice grip pliers, voltmeter, wire gauge (metric), work bench, 4 point relays, 5 point relays, air bag simulator, air conditioned mpfi vehicle, with auto transmission and, air conditioning service unit (car), air conditioning trainer kit, alternator assembly used for lmv, arbor press hand operated 2, ton capacity, general installation/ machineries, cut section model of moc
Tender For annual maintenance of gas crematorium equipment at mananthavadi municipality wayanad district proposed under 2025-26 annual plan. project no-1068 - civil work, od319315/2025-2026supply, replacement and servicing of automatic burner and fitting gas line., od319328/2025-2026cleaning of chimney surface, machinery repairing, removal of soot and rust, and applying primer with two coats of epoxy paint., od319385/2025-2026repairing damaged brickwork by removing broken bricks and replacing them with new bricks using cement mortar. the work also covers proper alignment,joint finishing, curing, and cleaning of the repaired area, complete as per direction of engineer-in-charge, od319413/2025-2026servicing and maintenance of the motor electrical system, such as inspection of wiring, terminals, switches and connections. it also covers tightening of loose connections, minor repairs, testiong for proper operation, and ensuring safe and smooth functioning of the motor., od319470/2025-2026reparing damaged or worn-out bed with 18 mm ss rod structures by alignment correction, replacement of defective parts if required, welding or fastening works, and ensuring proper strength and stability., od319499/2025-2026repairing of the gas valve system, such as cleaning , replacement of worn-out seals orcomponents if required, leak testing, and ensuring smooth and safe operation. the work shall be carried out as per safety norms., od319520/2025-2026removal of rust, scale, and old loose paint from equipment surface by wire brushing /scrapng, surface cleaning, application of suitable anti-corrosive primer, and finishing with two coats of approved paint. the work includes all materials, labour, tools and incidental charges required to complete., od319580/2025-2026comprehensive maintenance of the installed equipment for a period of one year, covering routine inspections,servicing, minor repairs,adjustments and ensuring continuous and safe operation. including survice of burner, blower, impeller and chimney. the rate includes labour, tools and incidental charges during the maintenanace period, excluding major replacements unless specified.
Tender For installation of various instruments and monitoring system at vadi irrigation scheme - supplying, installing, testing, and commissioning of a v-notch weir mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anti-corrosion finish. complete in all respects as directed by the engineer-in-charge.with different sizes mentioned below: (1) 90° vnotch- 20 x 40 secticin 15 lit/sec, providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in-charge., providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc (c) concrete grade 1:2:4 and msa-40mm(graded))
Tender For installation of various instruments and monitoring system at thebi irrigation scheme - supplying, installing, testing, and commissioning of a v-notch weir (mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anti-corrosion finish. complete in all respects as directed by the engineer-in-charge.with different sizes mentioned below: (1) 90° vnotch- 20 x 40 secticin 15 lit/sec, providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in-charge., providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc (c) concrete grade 1:2:4 and msa-40mm(graded))
Tender For installation of various instruments at raidy & dhataravdi-1 irrigation scheme - item no.1:- providing, supplying, installing, testing, and commissioning of a v-notch weir (mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss- 304/ss-316 plate with thickness of 3-5 mm, and be suitable for measurement ranges of approximately 0-50 l/s depending on notch angle. the weir shall have ±1% fullscale reading accuracy, operate under 5-100% humidity, temperature -20°c to +60°c, and provide corrosion protection through anti-corrosion finish. complete in all respects as directed by the engineer-in-charge. (1) 90° v-notch-20 x 40 secticin 15 lit/sec , item no.2:- providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in-charge. , item no.3:- providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks, centering, scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc. (c ) concrete grade 1:2:4 and msa-40 mm(graded)
Tender For 4th call - procurement, supply of tools and equipments for lascars and helpers pertaining to irrigation sub division no.4, pdpl, id4 manthani of ic-pdpl, peddapally district - supply of torch light (make: philips) multi functional long range with rechargable with 1 year warranty and 1 year extended warranty as directed by the engineer-in-charge. , supply of tool kit spanner set ring spanner 6-32 (make: taparia) as directed by the engineer-in-charge. , supply of sluice operating handle ( 1 small & 1 big for medium gear boxes for dps & ots) as directed by the engineer-in-charge. , supply of sickles/ kodavali (make:tata) as directed by the engineer-in-charge. , supply of shovel (make: tata) 10 number 1.8 kg as directed by the engineer-in-charge. , supply of safety helmet isi(make:karam) as directed by the engineer-in-charge. , supply of rain coats (make:zeel) as directed by the engineer-in-charge. , supply of platic big gamela (make:srp gold/pooja) as directed by the engineer-in-charge. , supply of nylon rope 16 mm yellow (30 metre) (make:cheeta) 24 kgs weight as directed by the engineer-in-charge. , supply of measuring tape 30m isi(make: freemans) as directed by the engineer-in-charge. , supply of hand gloves electric shock proof as directed by the engineer-in-charge.( for 11 kv including 13.615% contractor profit). , supply of hammers( make:tata) 2 lb weight as directed by the engineer-in-charge. , supply of gum boot safety steel toe double colour(make: big elephant) as directed by the engineer-in-charge. , supply of grease gun 5 kgs (make:capson) as directed by the engineer-in-charge. , supply of crow bar (make;tata) 25 mm as directed by the engineer-in-charge. , supply of cotton waste per kg as directed by the engineer-in-charge.( each lascar - 10 kgs) , supply of chain saw 22" petrol (make: forte ) (with 6 months warranty for bore & piston) as directed by the engineer-in-charge. , supply of axe with wooden handle (make: tata) 1400 grams weight (min supply of 1 box i.e. 12 pieces, no loose) as directed by the engineer-in-charge. , supply of 2hp 4 stroke grass cutter/brush cutter umk 450 t (make: honda) (with 1 year warranty for bore & piston) as directed by the engineer-in-charge
Tender For auction sale of depot ferrous scrap - scrap condemned unserviceable old, broken and various types of tools, released from tool room section, consisting of flat files, half-round files, round files, pipe wrench (18"), ratchet handle (3/4"), combination pliers, hexa frame, crimping pliers (magar type), circlippliers (eastman), cable cutter, long nose pliers, torque wrench 1/2" (200 nm, chicago), torque wrench 1/2" (60?340 nm, chicago), torque wrench 1/2" (10?100 nm), torque wrench 1/2" (10?68 nm), measuring tape (5 mtr), double end spanners (6x7 mm, 8x9 mm, 10x11 mm, 12x13 mm, 14x15 mm, 16x17 mm, 18x19 mm, 20x22 mm, 21x23 mm, 24x26 mm, 25x28 mm, 27x32 mm, 30x32 mm, 36x41 mm and 41x46 mm), single end spanners (36 mm, 41 mm, 46 mm and 50 mm), ring spanners (6x7 mm, 8x9 mm, 10x11 mm, 12x13 mm, 14x15 mm, 16x17 mm, 18x19 mm, 20x22 mm, 21x23 mm, 24x26 mm, 25x28 mm, 30x32 mm and 36x41 mm), tubular spanners (6x7 mm, 8x9 mm, 10x11 mm, 12x13 mm, 16x17 mm, 20x22 mm and 36x41 mm), tap handles (10", 12" and 18"), allen keys (5 mm, 6 mm, 8 mm, 10 mm, 14 mm and 17 mm), allen key sockets (6 mm, 8 mm and 10 mm), hand tap sets (12 mm and 20 mm), socket wrenches 1/2" drive (13 mm, 14 mm, 16 mm, 17 mm, 18 mm, 20 mm, 22 mm, 23 mm, 24 mm, 27 mm and 34 mm), socket wrenches 3/4" drive (24 mm, 27 mm, 30 mm, 36 mm, 38 mm and 41 mm), distance pieces (3/4" x 400 mm, 3/4" x 200 mm and 1/2" x 3"), t-handle (3/4"), t-handle (1/2"), ratchet handle (1/2"), and drill sockets (1?2 mm, 2?3 mm and 4?5 mm), in broken and unserviceable condition, released from tool room section.
Tender For corrigendum : supply of impect wrench one inch , paint spray gun , trolley jack , mini pliers , circlippliers inner , circlippliers outer , power tool bits set , portable grinder four inch , drill sets , backpack tool bag