Latest cladding panel Tenders | Government cladding panel Tenders

Central Government/Public Sector

CTN :40726039

30 Jul, 2025 NA

Chennai - Tamil Nadu

Tender For supply of shell kit item for rapid metro m shells for medha electrics a)one coach set of roof and 3 mm side wallto drg. no. 1) roof complete to drg.no.70116001 col -i alt 'a' - 1 n o 2)side wall complete to drg.no.(617)emu/m/3ph-1-4-001 alt 'a' col-i - 1 no (617)emu/m/3ph- 1-4-001 alt 'a' col-ii- 1 no. the firm shall fulfil the requirement as per icf/md/specn.200, is sue status-01, rev.04 with amendment no - 1 b) end wall complete to drg no: (617)emu/m/3 ph-1-5-001 alt 'f' col-i - 1 no. (574)icf/mrvc/m/bt-1-5-002 alt 'h' col-i- 1 no the firm shall fulfi l the requirement as per icf/md/spec-315,issue status-01, rev.00 c) one coach set of body shell items and partition frames for emu m 3ph coaches to drg nos. 1. mounting arrange ment of equipment in ht room to drg no. emu/m/3ph-1-0-009 alt 'c' col- i - 1 no. 2. floor sup port angles in driver cab to drg no. emu/m/3ph-1-0-007 alt 'c' col-i - 1no 3. floor support angles in ht compt to drg no.emu/m/3ph-1-0-006 alt'd'col-i-1no. 4. cat walk arrangement t o drg no . icf/mrvc/m/bt-1-0-015 alt 'a' col-i-1no. 5. partition frames list to drg no. emu/m/ 3ph-1-0-002 col-i -1no. 6. back pieces for seat fixing and partitions to drg no. icf/mrvc/m/b t-1-0-008 alt 'c' col.i - 1 no. d) under frame complete to drg.no.(617)emu/m/3ph-1-1-001 col-i ii alt 'f'- 1no the manufacturing facility as per icf/md/specn.147, issue status-01, rev.02 wi th amendment no.1 special condition : a) packing as per icf/j&t/misc-2201, alt 'e', b) packing a s per icf/j&t/sk-1809, alt 'a'. c) packing condition as per icf/j&t/sk-1865, alt "a" d) packing c ondition as per drg.no.icf/j&t/misc-2487, alt 'b' the underframe should be supplied as no rmal side up & side bearer side down. [safety item ]

State Government

CTN :40627983

30 Jun, 2025 30.36 Lacs

Salcete - Goa

Tender For corrigendum : construction of hall and supplying gym items for pinto youth club of baradi in velim constituency under mla-lad scheme (re-tender). - demolishing laterite stone masonry in cement mortar including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead., demolishing cement concrete 1:3:6 or richer mix including disposal of material within 50 m lead., laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement., extra for laterite masonry in all sizes in superstructure from floor i level upto floor v level., 12mm cement plaster 1:4 (1 cement : 4 fine sand), providing and fixing 1st quality ceramic glazed wall tiles (johnson somany kajaria ) conforming to is:15622 (thickness to be specified by the manufacture of approved make in all colours shades except burgundy bottle green black of any size as approved by engineer-in-charge in skirting risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @3.3kg per sq.m including pointing in white cement mixed with pigment of matching shade complete.;wall ceramic glazed tiles : 300 x 600, providing and and laying antiskid floor tiles 12 x 12 upto 16 x 16 in of johnson somany kajaria (thickness to be specified by the manufacturer) of 1st quality conforming to is: 15622 of approved make in shades as specified laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete;dark shades, proving and fixing white vitreous china wall hung type (european type) water closet with seat and lid with c.i. brass hinges and rubber fittings with flush valve nelson/ similar fully chromium plated with stop cock wall flanges flush pipe or elbow and vaccum breaker coupling etc. including chair bracket/rag bolts cutting & making good the walls and floors where required and concealed seat support - w.c. pan with white plastic seat and lid, providing and fixing brass stop cock (heavy) of approved quality :;15 mm nominal bore, providing and fixing brass full way valve (heavy) duty with wheel of approved quality :;20 mm nominal bore, providing and fixing p.v.c. connection pipe with brass unions 15 mm nominal bore:;45 cm (18 ) length ., providing and fixing rigid pvc s.w.r. (soil waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed:; 110 mm dia, providing and fixing rigid pvc bend (approved make) for s.w.r. pipes including lubricating etc complete bend with door :; 100 mm dia, providing and fixing nahani trap of rigid pvc (approved make ) for s.w.r. pipes including lubricating etc complete without door :;110 mm dia, providing and fixing nickel chrome plated copper alloy fancy bib cock short body jaquar make or equivalent.confirming to is 8931; 1993;15mm nominal bore, providing and fixing chlorinated ployvinyl chloride (cpvc) pipes confirming to is:15778 having thermal stability for hot and cold water supply including all cpvc plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. this includes jointing of pipes and fittings with one step cpvc solvent cement and testing of joints complete as per direction of the engineer-in-charge. concealed work (medium duty sdr 13.5 pipe) including cutting chases and making good the walls etc.;20 mm dia nominal outer dia pipes., providing and fixing hand shower (health faucet) with 8mm dia abs/brass body with double lock 1.00 m long flexible tube (brass plated stainles steel flexible hose) and wall hook of approved quality confirming to is standards., frp (fiber reinforced polymer) frames with wood finish manufacture supply and installation (with anchor fastener) of epee or equivalent goan make frp (fiber reinforced polymer) frame of cross section as per options below with right angle joint and frp (f

Central Government/Public Sector

CTN :40595786

20 Jun, 2025 NA

Angul - Odisha

Tender For corrigendum : supply of 1 x 1010 kva dg set and accessories - 1010 kvae 1500 rpm, 415v, 0.85 pf lag, prime power dg set with radiator on common base frame , fuel day tank of 990 liters capacity with accessories , 24v dc, 360 ah- minimum lead acid type automotive battery with accessories and stand, to be supplied at the time of commissioning , float cum boost battery charger panel with stand for one dg , necessary fuel piping, supports, accessories for one dg , silencer,exhaust piping, supports, with bellows, reducers, flanges and accessories and insulation with aluminium cladding up to entire length for one dg , galvanized exhaust support structure with foundation bolts and accessories for 1 dg , acoustic enclosure for one dg with ventilation fans, exhaust fans, if applicable, and lighting fixtures , lt power, control, instrument and screened cable including all accessories like lugs, glands, ties etc. for one dg set , engine b-check kit for one dg, to be supplied at the time of commissioning , first fill of lube oil, coolant and coolant conditioner at site for one dg, to be supplied at the time of commissioning , tools and tackles specific to offered dg set , phase side and neutral side terminal box for one alternator , amf panel for one dg , mandatory spares for dg set and panels , supervision of erection of one dg set with exhaust piping and structure, fuel piping, control panels and cabling , supervision of testing, pre commissioning checks, and commissioning and load trial of one dg set with control panels as per operating philosophy , total freight charges for all supplies including spares bid number/ & ( * ) : gem/2025/b/6305713 dated/ + : 03-06-2025 bid document/ 3 3 1 / 17

CTN :40467835

17 Jun, 2025 2.00 Lacs

Jhansi - Uttar Pradesh

Tender For corrigendum : supply of led strip for defence duty vehicle , digital signature certificate , calling bell , green carpet , coper wire , wall mounted frame , digital watch , led board for brigade logistics support area

CTN :40704782

04 Jul, 2025 NA

South Andaman - Andaman And Nicobar Islands

Tender For custom bid for services - work for setting up of ipms repair facility at nsry (svp)-1.00 services-1.01 construction of hollow block wallof size 6'x6'x16" cub 46.5, 1.02 casting of support beam for wall 6"x4" r/mtr 110, 1.03 inside side & out side sand pla ter 12 mm thick sqm 440, 1.04 painting and finishing with plastroguard paint (2 coat on, exterior) & (2 coat in interior emulsion for inner wall) sqm 440, 1.05 aluminum frame ceiling with 2x2 feet gypsum ceiling, board sqm 300, 1.06 fixing of electrical (2 switch & 2-socket 16a @ 20 box), (fixing of ceiling round light 15 w) job 1, 1.07 antiskid flooring sqmm 300, 1.08 double door nos 1, 1.09 single door nos 1, 1.10 ac 1.5 ton nos 5, 1.11 setting up pcb test room sqm 42, 1.12 windows (aluminum with grills) nos 3, 1.13 window blinds nos 3.

CTN :40726454

01 Jul, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of t/p & t/g board with back support of angle frame of size 25 mm x 25 mm x 3 mm with clamp ing arrangements for fixing of post made out of 18 gauge thick ms sheet donded with approved color retro reflective sheeting including all letters made out of computerized screen printing on retro reflective sheetin g . the retro reflective sheeting shall be of high intensity grade having pressure sensitive/heat activated siz e 1 m dia. t/p board=30 nos. & t/g board=30 nos. as per annexure-a [ warranty period: 30 mont hs after the date of delivery ]

CTN :40714458

19 Jun, 2025 4.95 Lacs

Hanumangarh - Rajasthan

Tender For supply of bal vatika equipments with installation total 5 works rawatsar - excavation by labour including loading, unloading, disposal soil within initial lead 50 meters and lift up to 1.50 meters in dry or moist including dressing of exacavted area. back filling and dewatering wherever required complete all respect, (hard soil). (bsr item no. 2 b). in hard soil, 1:2:4 , , , , , 1:3 (item no 13a), four seater mgr:- providing and fixing of four seater mgr swing of size 4/5 feet (diameter), 3 feet (height) fabricated with a center pipe/ frame of 50 nb shall be made from c class g.i. pipe and frp material. the bottom shall be welded with support of m.s. round plate of 250 mm & 10mm thickness. the bottom frame of 32nb shall be made from c class g.i. pipe. the handle frame of 25nb shall be made from c class g.i. pipe. the foundation should be used for fixing is a structure and shall be made from center pipe of g.i. of 50 nb c class welded with m.s. round plate of 250 mm & 10mm thick. main pipe shall be supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. closing caps shall be made up of high quality fiber reinforced plastic material. high tensile steel with galvanized nuts and bolts shall be used for assembly. the powder coating shall be done with pure polyester powders from ackzonoble or berger paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. (the cement concrete and excavation work shall be paid separately). (non bsr item no. 01, dwdsc/2021-22/6329-443/04.03.2022)., circular swing four seater:- providing and fixing of circular swing four seater of size 6.0 x 5.25 x 5.0 feet fabricated with a center pipe/ frame of 65 nbshall be made from c class g.i. pipe and frp material. the bottom shall be welded with support of m.s. round plate of 250 mm & 10mm thickness. the bottom frame of 32nb shall be made from c class g.i. pipe. the handle frame of 25nb shall be made from c class g.i. pipe. the foundation should be used for fixing is a structure and shall be made from center pipe of g.i. of 65 nb c class welded with m.s. round plate of 250 mm & 10mm thick. main pipe shall be supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. closing caps shall be made up of high quality fiber reinforced plastic material. high tensile steel with galvanized nuts and bolts shall be used for assembly. the powder coating shall be done with pure polyester powders from ackzonoble or berger paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. (the cement concrete and excavation work shall be paid separately). (non bsr item no. 02, dwdsc/2021-22/6329-443/04.03.2022)., four seater see saw:-providing and fixing of four seater see saw of size 5.5 x 6.25 x 2.5 feet fabricated with a center pipe/ frame of 50 nb shall be made from c class g.i. material. the bottom shall be welded with support of m.s. round plate of 250 mm & 10mm thickness. the bottom frame of 32nb shall be made from c class g.i. pipe. the handle frame of 25nb shall be made from c class g.i. pipe. the foundation should be used for fixing is a structure and shall be made from center pipe of g.i. of 50 nb c class welded with m.s. round plate of 250 mm & 10mm thick. main pipe shall be supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. closing caps shall be made up of high quality fiber reinforced plastic material. high tensile steel with galvanized nuts and bolts shall be used for assembly. the powder coating shall be done with pure polyester powders from ackzonoble or be

CTN :40521848

17 Jun, 2025 NA

Delhi - Delhi

Tender For bid to ras corrigendum : repair, maintenance, and installation of plant/ systems/equipments (version 2) - office space; supply installation commissioning of equipments and devices for storage; buyer-providing compactors made out of 0.8mm thick crca steel conforming to is: 513 gr. d each unit have 4 loading levels formed by 3 nos . adjustable shelves . body units are bolted to under carriage . optimizer height form ground is 2080 mm (1980 body + 65 undercarriage +35 channel system) the body i /c shelves are given antirust surface treatment & are powder coated with epoxy polyester powder. it involves treatment consisting of hot water rinse. knock of degreasing, cold-water rinse, phosphating ,cold water rinse , passivation & dry off oven treatment. final finish consists of epoxy polyester powder coating of approved color & shade with a dry film thickness of minimum 40 microns . the testing of paint is done for various physical & chemical properties as per is: 101. the material is the oven backed with a controlled temperature of 180 deg. c . to 200 deg . c. it is made of 0.8 mm thick crca steel conforming is is : 513 gr . d or dd its max load bearing capacity is 80 kg uniformly distributed per shelves are mounted on support bracket & shelf level can be adjusted at approx. 25.4 pitch . there are 3 adjustable shelves per body given per body given 4 loading levels , if bi cradle pair is provided the under carrying is a welded frame made of hr sheet 3.15 mm thick conforming to is : 10748 suitably fabricated to take the loads based on configuration . a centralized locking arrangement is provided through locking stiffener mounted on to back of single last unit so that it gets locked on channels when all the units are brought together. 10 bodies.

Central Government/Public Sector

CTN :40701866

27 Jun, 2025 NA

Mumbai - Maharashtra

Tender For supply of support frame/cross section for lhb fiat bogie as per fiat drawing. no: 1267405 alt -02 r1 , item conforming with mdts 150 rev. nil or latest & mdts 166 rev. 2 or latest. [ warranty period: 30 m onths after the date of delivery ]

Central Government/Public Sector

CTN :40700149

25 Jun, 2025 NA

Kota - Rajasthan

Tender For supply of caution order board retro-reflective engineering indicator boards, made of 2mm thick al uminum sheet or 3mm thick aluminum composite |sheet, face to be fully covered with high |intensity enca psulated type heat activated retro-reflective sheeting conforming to |type-iv of astm-d4956-01 in yellow & black or other colour combination including subject matter, message, symbols. borders etc. as approved by engineer incharge or as per irpwm guidelines, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class-2 of astm-d-4956-01 and fixing |the same wit h suitable sized aluminum alloy rivets @ 20 cm c/c to back-support |frame of m.s. angle iron of size 25mm x25mm x 3mmprovided all along the edges of board with theft resistant measures back side of board shall be with non-peelable weatherproof paint, consisting of one coat of zinc chromate |primer and two coats of epoxy paint. [ warranty period: 30 months after the date of delivery ]

Cladding Panel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector