Latest clamp spares Tenders | Government clamp spares Tenders

CTN :40557166

20 Jun, 2025 NA

Udhampur - Jammu And Kashmir

Tender For supply of alternator 10x631 , plate adjust 10x797 , screw heavy head cap 10x593 , fan belt 10x550 , sensor water temp 10x501 , connection air inlet 10x553 , gasket connecting 10x566 , hose molded 10x607 , clamp hose 10x604 , engine fan 3a0133 , screw heavy head cap m8x45 , fan sensor 3a0233 , kit injector 10x880 , screw heavy head cap 10x600 , gauge old 10x703 , guide gauge 10x705 , guide base 10x706 , element lubrication old filter 10x0619 , plug drawn 10x701 , motor starter 10x632 , hex hange head cap 10x593 , pin centre 3c0090 , screw 353915x0.5 , tooth 3c0050 , nut 353427x0.5 , flexible hose 3c0165 , flexible hose 3c0176

CTN :40539961

20 Jun, 2025 NA

Pithoragarh - Uttarakhand

Tender For supply of complete stores for living shelter 16 men fems - main columns will be made of 100m x 100m x 4mm square section of 3 length , wind breaker columns c1 will be made of 80mmx40x3 point 2 mm rhs 2 x 2 point 70 mtr and 2x2 point 40 mtr , purlin should be made of rhs 80 x 40 x 2 point 9mm of length 2 point 60 mtr and 2 nos purlin of size 80x40x2 point 9mm of length 1 point 5 mtr for wind braker , truss made of rhs main member of 80x40x2 point 9mm , runner of length 2 point 53 mtr and 04 nos gable side runner of length 2 point 40 mtr made of shs 40x40x3 point 2mm , pedestal of height zero point 30 mtr made of shs 150mmx150mmx6mm , wind breaker a cabin of size 1500mm x 1500mm made of 4 nos ms square tube 80mmx40mmx3.2mm and hight 02 nos 2 point 70 and 2 nos 2 point 40 ht with 60mm thick puf panel , double bunks ms of size 1930mm x 930 x 1840 at leg side and 910mm hight with 02 nos mattress with each bunk , ladder shall be provided on kg side in between long rial connecting lower bunk and upper bank , mattress smart ortho mattress ultimate back pain relief of size 1890mm x 800mm , all nuts and bolts used for joining the structural members shall be of high quality and varieties of bolts as per specification , sun shade for door and window openings will be provided with 450mm wide sun shade made out of same material as of roof sheets matching with roof colour as per technical specification documents , suitable flashing with zero point 6mm thick pre coated sheet of matching colour with panels will be provided at all joints between roof and wall corners as per specification , lightning conductor made of copper tube 150cm long x 25 mm dia with five copper prongs of length 15cm each fixed to copper ball of dia 50mm and 4mm thick with securing arrangement , earthing of building provided using 3mm dia gi earth wire connecting to main board to gi earth plate of size 60cm x60cm 6mm thick , lower outer frame rhs 80mm x 40mm 2.9mm thick and having two through holes at each end to enable suitable fitting of u clamp on the bushing system at the columns , lower gable outer frame rhs 80mm x 40mm x 2 point 9mm thick and having two through holes at each end to enable suitable fitting of u clamp on the bushing system at the columns , lower cross tie beam rhs 66x33x2 point 9mm has to be fitted with the columns in the u channel fitted at the lower side of the columns , floor panel 6 mm thick vinyl sheet of approved colour over 18mm thick bwp oblique bwr isi ply board shall be shall be provided for floor , pedestals will be made of 150x150x6mm sections of height 300mm with base plate of size 400x400x 12mm , foundation for all pedestals will be of pcc 1 2 4 type b1 20mm graded stone aggregate of size 450x450x900mm over the sub base 100mm thick pcc 1 4 8 using 40mm graded stone aggregate , field heating device , sleeves for field heating device as per specification , peg sets will be provided stainless steel premium fesue dual edge 8 pin cloth hanger bathroom wall door hooks , curtain rods for all openings of doors and windows of shelter will be provided with drapery rods made of 25mm dia , looking mirror of size zero point 5 x 1 point 65mm with wooden frame , iron foot scrapper for size 600mm x 450mm will be provided for entrance doors , iron foot mat for size 1200mmx900mm comprising of internal wire mesh of gauge 18 swg will be provided for entrance doors , all electric items shall be isi marked as per specification , stainless steel shoe rack and shoe stand and multipurpose stand of 31x24 inch , swing open to top dust bin stainless steel 12x28 inch 50l , supply only transitional end table with open shelvees size 24x22x18 inch , stainless steel heavy duty double pole 3 lalyer foldable and moveable prince jumbo cloth drying stand brc 786 ss grey , ordinary portland cement grade 43 and is 12269 to 1990 and packed in 50 kgs hdpe bags , coarse sand , stone aggregate shall be crushed stone 20mm graded conforming to is 383 1970 , stone aggregate shall be

CTN :40540699

20 Jun, 2025 NA

Pithoragarh - Uttarakhand

Tender For supply of complete stores for living shelter 16 men fems - main columns will be made of 100m x 100m x 4mm square section of 3 length , wind breaker columns c1 will be made of 80mmx40x3 point 2 mm rhs 2 x 2 point 70 mtr and 2x2 point 40 mtr , purlin should be made of rhs 80 x 40 x 2 point 9mm of length 2 point 60 mtr and 2 nos purlin of size 80x40x2 point 9mm of length 1 point 5 mtr for wind braker , truss made of rhs main member of 80x40x2 point 9mm , runner of length 2 point 53 mtr and 04 nos gable side runner of length 2 point 40 mtr made of shs 40x40x3 point 2mm , pedestal of height zero point 30 mtr made of shs 150mmx150mmx6mm , wind breaker a cabin of size 1500mm x 1500mm made of 4 nos ms square tube 80mmx40mmx3.2mm and hight 02 nos 2 point 70 and 2 nos 2 point 40 ht with 60mm thick puf panel , double bunks ms of size 1930mm x 930 x 1840 at leg side and 910mm hight with 02 nos mattress with each bunk , ladder shall be provided on kg side in between long rial connecting lower bunk and upper bank , mattress smart ortho mattress ultimate back pain relief of size 1890mm x 800mm , all nuts and bolts used for joining the structural members shall be of high quality and varieties of bolts as per specification , sun shade for door and window openings will be provided with 450mm wide sun shade made out of same material as of roof sheets matching with roof colour as per technical specification documents , suitable flashing with zero point 6mm thick pre coated sheet of matching colour with panels will be provided at all joints between roof and wall corners as per specification , lightning conductor made of copper tube 150cm long x 25 mm dia with five copper prongs of length 15cm each fixed to copper ball of dia 50mm and 4mm thick with securing arrangement , earthing of building provided using 3mm dia gi earth wire connecting to main board to gi earth plate of size 60cm x60cm 6mm thick , lower outer frame rhs 80mm x 40mm 2.9mm thick and having two through holes at each end to enable suitable fitting of u clamp on the bushing system at the columns , lower gable outer frame rhs 80mm x 40mm x 2 point 9mm thick and having two through holes at each end to enable suitable fitting of u clamp on the bushing system at the columns , lower cross tie beam rhs 66x33x2 point 9mm has to be fitted with the columns in the u channel fitted at the lower side of the columns , floor panel 6 mm thick vinyl sheet of approved colour over 18mm thick bwp oblique bwr isi ply board shall be shall be provided for floor , pedestals will be made of 150x150x6mm sections of height 300mm with base plate of size 400x400x 12mm , foundation for all pedestals will be of pcc 1 2 4 type b1 20mm graded stone aggregate of size 450x450x900mm over the sub base 100mm thick pcc 1 4 8 using 40mm graded stone aggregate , field heating device , sleeves for field heating device as per specification , peg sets will be provided stainless steel premium fesue dual edge 8 pin cloth hanger bathroom wall door hooks , curtain rods for all openings of doors and windows of shelter will be provided with drapery rods made of 25mm dia , looking mirror of size zero point 5 x 1 point 65mm with wooden frame , iron foot scrapper for size 600mm x 450mm will be provided for entrance doors , iron foot mat for size 1200mmx900mm comprising of internal wire mesh of gauge 18 swg will be provided for entrance doors , all electric items shall be isi marked as per specification , stainless steel shoe rack and shoe stand and multipurpose stand of 31x24 inch , swing open to top dust bin stainless steel 12x28 inch 50l , supply only transitional end table with open shelvees size 24x22x18 inch , stainless steel heavy duty double pole 3 lalyer foldable and moveable prince jumbo cloth drying stand brc 786 ss grey , ordinary portland cement grade 43 and is 12269 to 1990 and packed in 50 kgs hdpe bags , coarse sand , stone aggregate shall be crushed stone 20mm graded conforming to is 383 1970 , stone aggregate shall be

CTN :40540705

27 Jun, 2025 NA

Pune - Maharashtra

Tender For supply of laboratory equipments and standards as per spec. no. hemrl/qard/spec/2025/lab equipments & standards - acid storage cabinet with exhaust system, capacity: 100-120 liter, qty: 01 no a. construction of cabinet should be minimum 8mm polypropylene panels, which can give protection against harsh acids, alkali and corrosion. b. there should have adjustable and reversible shelves and can be customized. c. the storage should be divided into two parts to store different acids. d. front door of the cabinet shall be in twin door design having glass panel. e. door hasp should accept padlock to achieve double locks and also have safety lock system. f. there should have circulating fans with air vents. , acid storage cabinet with exhaust system, capacity: 220-250 liter, qty: 01 no a. construction of cabinet should be minimum 8mm polypropylene panels, which can give protection against harsh acids, alkali and corrosion. b. there should have adjustable and reversible shelves and can be customized. c. the storage should be divided into two parts to store different acids. d. front door of the cabinet shall be in twin door design having glass panel. e. door hasp should accept padlock to achieve double locks and also have safety lock system. f. there should have circulating fans with air vents. , sample storage cabinet, capacity: 220-250 liter, qty: 02 nos. a. the laboratory sample storage cabinet should be made of pure stainless steel. b. there should have adjustable shelves and can be customized. c. should have double lock system. d. front door of the cabinet shall be in twin door design having glass panel. ?. should be workable within temperature range of 10-50c and humidity of 20-80%. f. door handles shall make of ss 304., glass membrane filtration assembly with three manifold system and vacuum pump & other accessories, qty: 02nos. vacuum filtration assemblies made of borosilicate glass that should be compatible with most organic solvents for solvent filtration purpose. b. funnel, receiver flask & filter support base should be made of borosilicate glass the filter support base design should have an integral vacuum connection located above the filtrate dip such that it can prevent contamination of the vacuum line from droplets. d. it should be three place manifold glass filtration assembly. glass funnel capacity: 300ml f. filter support base with sintered glass filter: 47mm. g glass receiver flask: i) 500ml-01 no, ii) 1000ml-01 no iii) 2000ml-01 no. h. aluminium clamp: 47mm i. effective filtration area: 9.6cm the filtration base should have a silicon stopper. k. all accessories should come with assembly. vacuum pump: , vacuum pumps are to be equipped with vacuum regulator to adjust vacuum. b. vacuum pump should have thermal protection device to shut off the pump automatically when overheated and resume working when temperature cools down. c. max. vacuum (mbar): 100 d. max flow rate (l/min): 17 e. motor rotation (rpm): 1450 , digital rotary shaker, qty: 02 nos. the rotary shakers comprises of shaking platform, speed regulator and timer to adjust duration of orbital motion. b. shaking platform should be made of ss 304 to avoid any kind of rust formation. clamps should be made of either unbreakable plastic or stainless steel d. the housing should be made with thick sheet of mild steel duly powder coated. motion: rotary motion f shaking mechanism: brushless motor used for shaking b digital lcd display with rpm controller provided in the panel. h over temperature alarm. speed (rpm): 20-200 accuracy: 1c k. volume capacity: should be of different sizes like as 16 x 250ml and 16 x 500ml. l platform dimension (inches): 18 x18 m. temperature control: electronic/automatic ceramic hotplate magnetic stirrer, qty: 06 nos. a. digital lcd display with back light. b. big size ceramic hot plate with flame protection and durability. e. heating and stirring can proceed simultaneously. d. temperature & stirring speed is stepless adjusted.

CTN :40534651

17 Jul, 2025 NA

Delhi - Delhi

Tender For procurement of spares for rafale aircraft - mounting base,tiedown,electrical, mounting base,tiedown,electrical, mounting base,tiedown,electrical, mounting base,tiedown,electrical, shell,electrical connector, termination,shield,electrical conne, clamp,cable,electrical connector, crr receptacle valve, shell,electrical connector, connector body,receptacle,electrica, connector body,plug,electrical, connector body,plug,electrical, connector body,plug,electrical, connector body,plug,electrical, connector body,plug,electrical, connector body,plug,electrical, screw,externally relieved body, screw,externally relieved body, clamp,loop, clamp,loop, end fitting,spherical,swivel fittin, screw,close tolerance, screw,close tolerance, hinge,butt, hydraulic hose, hydraulic hose, latch assembly,aircraft, clamp, clamp,loop, clamp,loop, bearing,plain,self-aligning, bolt,close tolerance, bolt,close tolerance, bolt,close tolerance, bolt,close tolerance, bolt,close tolerance, screw, screw,close tolerance, screw, overhead lighting module, rivet,blind, maniflod,hydraulic system accessori, setscrew, cover,access,aircraft, channel,aircraft, tube assembly,metal, clamp,bridge, bell crank, cover,access,aircraft, nut,self-locking,round, pin,headed,threaded, cover,access,aircraft, cover,access,aircraft, cover,access,aircraft, cover,access,aircraft, cover,access,aircraft, gasket, cover,access,aircraft, cover,access,aircraft, cover,access,aircraft, skin,aircraft, skin,aircraft, skin,aircraft, bearing,plain,rod end, tube assembly,metal, tube assembly,metal, lever,remote control, propeller shaft with universal join, nut,plain,round, liner,location, cover,access,aircraft, spacer,plate, cover,access,aircraft, bell crank, spacer,straight, pipe,exhaust, connecting link,rigid, connecting link,rigid, connecting link,rigid, connecting link,rigid, guide,positionning, cover,access,aircraft, cover,access,aircraft, door,access,aircraft, cover,access,aircraft, cover,access,aircraft, cover,access,aircraft, cover,access,aircraft, door,access,aircraft, cover,access,aircraft, cover,access,aircraft, cover,access,aircraft, fairing,aircraft, link set,weak,refueling boom, tube assembly,metal,branched, tube assembly,metal, bracket,multiple angle, duct,assembly,air conditioning-heat, duct,assembly,air conditioning-heat, duct,assembly,air conditioning-heat, bracket,double angle, bracket,structual component,aircraf, houssing,air outlet,aircraft, seal,nonmetallic special shaped sec, elbow,air conditioning-heating,airc, elbow,air conditioning-heating,airc, bracket,mounting, tube assembly,metal, tube assembly,metal, tube assembly,metal,branched, tube assembly,metal,branched, adapter,straight,flange to hose, duct section,air cooling,airtcr.gun, elbow,flange to tube, scoop,aircraft, scoop,aircraft, lateral,air conditioning-heating,ai, tube assembly,metal

CTN :40541274

11 Jun, 2025 NA

Medak-T - Telangana

Tender For supply of washer 6t 65 to 16 gost 6402-70. , shaft 675-10-42. , screw machine 700-35-355 , clamp to drg. no. 672-54- 9-19. , shaft shouldered 765-58-222. , lock control hand to drg. no. 765-58-cd199. , axle 675-73-459 , base 675-73-363

Central Government And Public Sector

CTN :40290236

06 Jun, 2025 NA

Kudankulam - Tamil Nadu

Tender For corrigendum : supply of phoneix contact make electrical spares - switched-mode power supply, 1-phase, with push-in clip, control in primary circuit, input ac 100-240v, output dc 24v-5a as per annexure-1a , switched-mode power supply, 1-phase, with push-in clip, control in primary circuit, input ac 100-240v, output dc 24v-10a as per annexure-1a , switched-mode power supply, 3-phase, control in primary circuit, input 3ac 320-575v, output dc 24v-40a as per annexure-1a , insertable miniature relay dc 60v, 1co, load - 230v-6a as per annexure-1a , insertable miniature relay dc 110v, 2co, load - 250v-8a as per annexure-1a , modular unit for relay mounting, 1co, power supply ac-dc 230v, width 6.2mm, rcz-filter in control circuit side as per annexure-1a , modular unit for relay mounting, 2co, power supply ac-dc 230v, width 14mm, rcz-filter in control circuit side as per annexure-1a , universal terminal block, gray, 32a, 1000v, standart size 2.5, width 5.2mm, doubleside screw connection as per annexure-1a , pe-terminal yellow-green, 32a, 1000v, standart size 2.5, width 5.2mm, double-side screw connection as per annexure-1a , universal terminal block, gray, 41a, 1000v, standart size 4, width 6.2mm, double-side screw connection as per annexure-1a , divider plate, length 42.5mm, width 2.5 mm, height 30.5 mm, colour gray as per annexure-1a , fuse terminal, black, 6.3a, 24v, standart size 4, width 6.2 mm, fuse 5x20, indicator 24v ac-dc as per annexure-1a , modular relay insulation, ac 230v, 50-60 hz 2co, load - 250v-8a, relay, base, led, clamp, plate as per annexure-1a , power socket, 3-pole l-n-pe, rated current - 16a, 230 v ac as per annexure-1a , spd, for 4-wire power supply systems as per annexure-1a , switched-mode power supply, 3- phase, control in primary circuit, input 3ac 320-575v, output dc 24v-5a as per annexure-1a , modular relay insulation, ac 230v, 50-60 hz 4co, load - 250v-5a, relay, base, led, clamp, plate as per annexure-1a , terminal with overvoltage protection, 10a, 24v, width 6.2 mm, black, double-side screw connection as per annexure-1a , switched-mode power supply, 1-phase, with pushin clip, control in primary circuit, input ac 100-240v, output dc 24v-3a as per annexure-1a

Central Government/Public Sector

CTN :40538938

12 Jun, 2025 NA

Mumbai - Maharashtra

Tender For supply and installation of work instructions display board for tl shop of pl w orkshop lower parel size 73 inch length & 49 inch width, board made of oval extruded fram e fixed on pu coated pipe with clamp mounted on circular base plate through conical cups e ngg grade unyl matter & pasted with eeco vinyl gloss lamination print and paste of work in structions in hindi consignee shall provide the matter to be printed, the annexure is attac hed for board details. [ warranty period: 30 months after the date of delivery ]

CTN :40522285

19 Jun, 2025 NA

Shopian - Jammu And Kashmir

Tender For supply of trummer 6 and 8mm carper specifiation not avalilable , router para 12 flr specifiation not avalilable , xpt 454 jig saw 65mm new specifiation not avalilable , kbs 731 planner 82mm specifiation not avalilable , maf combination square 12 inch 300 specifiation not avalilable , xp 1144 circular saw 1400w specifiation not avalilable , velcro pad m10 swishin specifiation not avalilable , maf nylon brush yellow 4 inch specifiation not avalilable , yw adj hole saw circle cutter specifiation not avalilable , scale 39 inch steel specifiation not avalilable , quik bar camp 12 inch steel specifiation not avalilable , baby vice fix base removerable 4 specifiation not avalilable , jb hand saw 18 inch specifiation not avalilable , hole saw 8 x drills bits specifiation not avalilable , tool kit and socket carper specifiation not avalilable , jk super driver 4 inch specifiation not avalilable , maf pro 6 adjusting speed specifiation not avalilable , corner clamp 4 pcs right angle clamp specifiation not avalilable , deodap aluminum ally rafter square specifiation not avalilable , f clamp 4 pcs specifiation not avalilable , ranpra aluminum universal drill stand specifiation not avalilable , face sheld anti fogg specifiation not avalilable bid number/ & ( * ) : gem/2025/b/6286401 dated/ + : 29-05-2025 bid document/ 2 2 1 / 19

CTN :40508369

17 Jun, 2025 NA

Medak-T - Telangana

Tender For supply of rotor (turbine) motor for murzello shot blasting machine, part. no: m400-401. , barrel plate seal for murzello shot blasting machine. part. no: m400-405. , barrel plate for murzello shot blasting machine, part. no: m400-406. , set of rotary blades for murzello shot-blasting machine, part. no: m400-407. , blade locking screw for murzello shot-blasting machine part no: m400-408. , casing eye bolt for murzello shot blasting machine, part. no: m400-410. , control cage seating for murzello shot blasting machine, part. no: 400-411. , clamp for control cage locking of murzello shot blasting machine, part. no: m400-412. , top liner for murzello shot blasting machine, part. no: m400-414. , top liner seal for murzello shot blasting machine, part. no: m400-415. , side liner for murzello shot blasting machine, part. no: m400-416. , impeller for murzello shot blasting machine, part. no: m400-419. , centering plate for murzello shot blasting machine, part. no: m400-420. , centering bolt for murzello shot blasting machine, part. no: m400-421. , control cage for murzello shot blasting machine, part. no: m400-422. , feed spout 45deg/90deg for murzello shot blasting machine, part. no: m400-424. , feed spout bkt seal for murzello shot blasting machine, part. no: m400-425. , feed spout bkt 45deg/90deg for murzello shot blasting machine, part. no: m400-426. , vibration pad for murzello shot blasting machine, part. no: m400-427. , base plate for murzello shot blasting machine, part. no: m400-428.

Clamp Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector