Latest clamp Tenders | Government clamp Tenders

State Government

CTN :40514371

03 Jun, 2025 NA

Delhi - Delhi

Tender For supply of mechanical items for various tubewells installed at loknayak puram, bakkarwala. - supply of gi pipe 50 mm dia, medium class with gi flange welded on both sides, each pipe 3mtr. long with threading work on each side of pipe, each flange should have 4 holes and cut for submersible cable. make: jindal / tata or any other make approved by djb., supply of gi tail piece medium class 0.5 mtr. long inclduing one end flanged and the other end threaded of 50 mm dia., supply of ms clamp 8 mm thick suitable for 8 inch bore dia, complete with nut and bolts and washers for holding the 50 mm dia pipe including bending and shaping etc. as required., supply of gi bend 50mm dia 90 deg. double flange. heavy class, make: ganesh / jindal/ tata / isi, supply of 6 mm thick steel wire rope to hold the pump., supply of required off size threaded nut bolts and washers of good quality., supply of ms bore cover 4 mm thick suitable for 8 inch bore size in 2 pieces complete with bolting arrangement angle iron frame and provision of 50 mm dia hole in the center., supply of neoprene rubber packing 3 mm thick, suitable for 50 mm bore pipe and having 4 holes for nut / bolts.

Central Government/Public Sector

CTN :40530033

10 Jun, 2025 NA

Kalka - Haryana

Tender For supply of wooden pipe clamp assembly for clamping of 20mm bore pipe as per drg no-cc36653 alt a . [ warranty period: 18 months after the date of delivery ]

Central Government/Public Sector

CTN :40528313

10 Jun, 2025 NA

Kalka - Haryana

Tender For supply of wooden pipe clamp assembly for clamping of 25mm bore pipes as per drg no. cc3 6833 [ warranty period: 18 months after the date of delivery ]

Central Government/Public Sector

CTN :40510866

16 Jun, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of e shaped clamp for brake hanger no. 5,6,19 & 20 to drg. no. dmw/el/sk-0002 requi red for wap-7 locos. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40523789

19 Jun, 2025 14.09 Lacs

Gaya - Bihar

Tender For supply of teflon tap , 4 inch pvc pipe , 4 inch pvc socket , 4 inch pvc tee , 4 inch pvc elbow , 4 inch pvc y tee , 4 inch pvc half bend 45 degree bend , 4 inch pvc p trap , 4 inch pvc nahanni floor trap , 4 inch x 3 inch pvc reducer , 4 inch pvc cross y tee , 4 inch pvc door elbow bend , 4 inch pvc door tee , 4 inch pvc sadal clam huk , 4 inch pvc end cap , pvc solvent 250g , 2 inch pvc pipe , 2 inch pvc socket , 2 inch pvc elbow band , 2 inch pvc tee , 1.5 inch pvc pipe , 1.5 inch pvc socket , 1.5 inch pvc elbow , 1.5 inch pvc tee , 1.5 inch cpvc pipe 500feet , 1.5 inch cpvc elow , 1.5 inch cpvc tee , 1.5 inch cpvc socket , 1.5 inch cpvc half bend , 1.5 inch cpvc mta , 1.5 inch cpvc fta , 1.5 inch cpvc ball valve , 1.5 inch cpvc union , 1.5 inch cpvc tank nipple , 1.5 inch cpvc end cap , 1.5 inch cpvc sedal huck clamp clip , 1.25 inch cpvc pipe 250 feet , 1.25 inch cpvc elbow , 1.25 inch cpvc tee , 1.25 inch cpvc socket , 1.25 inch cpvc half bend , 1.25 inch cpvc fta , 1.25 inch cpvc mta , 1.25 inch cpvc ball valve , 1.25 inch cpvc union , 1.25 inch cpvc tank nipple , 1.25 inch cpvc sadal huck , 1.25 inch cpvc end cap , 1 inch cpvc pipe 300feet , 1 inch cpvc elbow , 1 inch cpvc tee , 1 inch cpvc socket , 1 inch cpvc half bend , 1 inch cpvc mta , 1 inch cpvc fta , 1 inch cpvc sadal huck , 1 inch cpvc ball valve , 1 inch cpvc tank nipple , 1 inch cpvc union , 1 inch cpvc end cap , 0.75 inch cpvc pipe 500feet , 0.75 inch cpvc elbow , 0.75 inch cpvc tee , 0.75 inch cpvc socket , 0.75 inch cpvc half bend , 0.75 inch cpvc mta , 0.75 inch cpvc fta , 0.75 cpvc tank union , 0.75 inch cpvc tank nipple , 0.75 inch cpvc ball valve , 0.75 inch cpvc end cap , 0.75 inch cpvc sedal huck , 0.5 inch cpvc pipe 200feet , 0.5 inch cpvc elbow , 0.5 inch cpvc tee , 0.5 inch cpvc socket , 0.5 inch cpvc brass elbow , 0.5 inch cpvc brass tee , 0.5 inch cpvc fta , 0.5 inch cpvc mta , rope , 2x1angel cock pvc , m seal , wash basin , tank cover24 inch , 1.25 inch coulam pipe 10 feet roll pipe , adapter 1.25 inch , pvc shower , heath faucet , ewc toilet seat cover floor mounted , section pipe 1.25 inch , check valve foot valve 1 inch , spindle 0.75 inch jaquar , flush handal , hacksaw blade 1 inch 2 inch , toilet seat cover wall mount hanging , water storage tank alaram bell , iron cutting blade wheel 4 inch , tiles cutting blade wheel 4 inch , 0.75 inch 0.5 inch cpvc brass elbow , 0.75 inch 0.5 cpvc brass tee , 0.75 inch 0.5 cpvc brass mta , 0.75 inch x0.5 cpvc brass fta , 40x32mm cpvc reducer , 32x25mm cpvc reducer , 25x20mm cpvc reducer , 40x25mm cpvc bush , 32x20mm cpvc bush , 40x32mm cpvc bush , 32x25mm cpvc bush , 25x20mm cpvc bush , 20x15mm cpvc bush , 20x15mm cpvc reducer , cpvc solvent 200gm , chaina nails 1 inch , chaina nails 1.5 inch , 0.5mm spindle , saifan washer , connection pipe , short bend pvc , compound tap , ewc seat with cover , cement bag , white putty bag , tiles 200x300 , tiles 300x300 , tiles 300x600 , pvc long body , pvc angle cock , pvc waste pipe , pvc urinal pipe , pvc pillar cock , pvc push cock , pvc connection pipe , wash basin , bit nipple 0.5 mm , thinner , measuring tap 5 meter , measuring tap 10 meter , brushless drill machine , hammer drill bit 6mmx20mm , 4 inch iron cutting wheel , 4 inch tiles cutting blade , hacksaw blade one double sided , water pump plier 12 inch , pipe wrench 12 inch , adjustable wrench 12 inch , screwdriver magnetic , mini screwdriver , angle grinder cutter , toilet plunger , sprit level , plumb bob , m.s. basuli hammer , trowel m size , line tester bid details/ 2 / 117

Central Government/Public Sector

CTN :40025025

10 Jun, 2025 NA

Panchkula - Haryana

Tender For corrigendum : supply of single needle lock stich machine with motor , single needle lock stich machine with needle , single needle lock stitch machine with unison , s.n.l.s. zig zag machine , double needle chain stitch machine , double needle lock stitch machine with split bar , electronic lock stitch bar , blind stich machine , twin needle feed off the arm machine , multi needle chain stitch machine with front placket , single thread saddle stitch machine , 6 threads safety stitch machine , 5 threads over lock stitch machine , 4 threads over lock stitch machine , 4 threads cylinder bed over lock stitch machine , 5 threads flat lock stitch machine , adjustable right angle binder , binder , blind stitch latch hemmer , button stay folder with lining , comp ft half inches right , comp ft one by thirty two inches needle hole , comp ft three by eight inches right , comp ft left zero point two five inches , comp ft left one by two inches , comp ft left three by eight inches , comp presser feet left zero point eight mm , comp presser feet left 1 point six mm one by sixteen inches , comp presser feet right zero point eight mm one by thirty two inches , comp presser feet right one point six mm one by sixteen inches , comp presser ft zero point eight mm one by thirty two inches , comp presser ft one point six mm one by sixteen inches , comp. presser ft one by four inches , comp. presser ft six point four mm one by four inches , comp ft one by thirty two inches left ndl hole , cord edge piping , downturn hemmer ft one by four inches , edge guide hemming ft large , edge guide hemming ft medium , edge guide hemming ft small , edge guide hemming ft x large , edge stitch foot one by thirty two inches 95 96 , feed dog , feed dog nineteen teeth , hemming ft one inches , hemming ft one by two inches , hemming ft three by four inches , hinged ft , hinged ft narrow , hinged hemming foot one by four inches , hinged lining ft , hinged presser ft , lap seam folder , latch hemmer one inches , latch hemmer three by four inches , left hinge raising ft one by two inches , left hinge raising ft three by eight inches , lockstitch split hemmer , lockstitch swing hemmer one inches , lockstitch swing hemmer one by two inches , lockstitch swing hemmer one dash one by four inches , lockstitch swing hemmer three by four inches , needle clamp set screw , needle point tracer , plain bias binder , presser foot sg 281 , right hinged raising ft one by sixteen inches , ruffler attachment , shirt tail hemmer one by four inches , shirt tail hemmer one by eight inches , shirt tail hemmer three by sixteen inches , shirt tail hemmer three by eight inches , single downturn hemmer three by sixteen inches , single downturn hemmer five by sixteen inches , single upturn hemmer three by eight inches , single upturn hemmer five by sixteen inches , sleeve folder complete , spagyetti att , spreader , spring balancer three point zero to five point zero kg , stitch joiner and ft one by four left , straight folder , swing single upturn hem three by eight inches , swing single upturn hem.five by sixteen inches , tape measure self-adhesive , teflee ft medium standard , teflee ft , throat plate , thumb screw singer , tongue hemmer one inches , tongue hemmer one dash one by two inches , tongue hemmer one dash one by four inches , tongue hemmer three by four inches , top and bottom waistband att , top center folder , wire hemmer ft one by thirty two inches , yoke attachment , zipper foot wguide bid details/ 2 / 70

Central Government/Public Sector

CTN :40511603

04 Jun, 2025 NA

Kapurthala - Punjab

Tender For supply of clamp for water tank piping arrgt., as per drawing: lg63283 alt nil , packing in struction: suitably packed in jute bags [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40510347

13 Jun, 2025 NA

Solapur - Maharashtra

Tender For supply of parallel clamp (157-65/107/150)(r.i no. 1031-3) with ss bolt nut and washer as per rds o drawing no. eti/ohe/p/1030-3 rev-a or latest and rdso specification no. ti/spc/ohe/fittings/0130 (10/13) rev-1 , [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40529438

09 Jun, 2025 NA

Vadodara - Gujarat

Tender For supply of suspension clamp body (1161) along with all accessories . rdso drg: re/33/p/1160/mod -k s tr: core-str-16 make-core approved source [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40529519

09 Jun, 2025 NA

Vadodara - Gujarat

Tender For supply of suspension clamp body (1161) along with all accessories . rdso drg: re/33/p/1160/mod -k s tr: core-str-16 make-core approved source [ warranty period: 30 months after the date of delivery ]

Clamp Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors