Latest clamping ring Tenders | Government clamping ring Tenders

Central Government/Public Sector

CTN :45419767

02 Jul, 2026 NA

Varanasi - Uttar Pradesh

Tender For bid to ras supply of scrapper bracket (hy-251.06) - un m/cd carbon steel casting as per drg. 16117000402/02 with matl as , rough m/cd bowl extn. ring seg. (hy-254. m) - as per drg. hy-254.00m rev-01 with matl. as per specn. a , bull ring clamping ring (hy-263. c) as per drg. no. hy-263. c rev 01 with matl as per specn. aa19511/0 , rough machined casting of spring housing cover (hy-854.06) as per drg. hy-854.06. c/00 with matl. as

CTN :45723773

30 Jul, 2026 NA

Kollam - Kerala

Tender For procurement of 210l nominal capacity m.s.open top drumswith lid, oring/gasket and clamping ring

Central Government And Public Sector

CTN :45370889

04 Jul, 2026 NA

Thane - Maharashtra

Tender For corrigendum : supply of clamping ring segments , hex head screws with spring washers for clamping ring segments , valve seal epdm rubber , plug for shaft pin

corporations/Associations/Others

CTN :45696580

08 Jul, 2026 NA

Kolkata - West Bengal

Tender For supply, delivery, installation of one number dismantling joint along with replacement of worn out spare parts, testing and commissioning of 750 mm dia. pdv and other allied works of pump unit no. 5 at cwps-ii, grww. - supply, delivery, installation, testing andcommissioning of 700 mm dia ms dismantling joints., dismantling counter weight, lever, arm, hydraulic unit etc. and all other components of the hydraulic system one by one of 750 mm dia. pump discharge valve parts by parts sequentially and cautiously as per direction of the engineer-in-charge (eic) at grww., dismantling the 750 mm dia. pdv from the existing pipe-bay, installatio/fitting-fixing of barrel-piece/flange and lifting & keeping the same on the working platform sequentially and cautiously as per diretion of the eic at grww., to and fro transportation charges of 750 mm dia. pdv from grww to workshop including loading and unloading.., dismantling all the components of 750 mm dia. pdv parts by parts sequentially and cautiously as per direction of the eic at grww/workshop., supply, delivery and fitting-fixing of drive shaft of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of valve seal of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of seat ring (ss 410) of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of seat ring (epdm rubber) of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of stub bearing bush of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of drive bearing bush of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of clamping ring of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of end cover of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of o ring of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of shaft pin of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of allen screw of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply,delivery and fitting-fixing of gland plate of 750 mm dia. pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of shaft key of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., repairing the damaged portion of the hole for holding the bearing of 750 mm dia. pdv by deposting metal, boring, machining, grinding etc., all complete, as per original shape and size and direction of eic at grww.., re-aasembling all the components of 750 mm dia. pdv parts by parts sequentially and cautiously as per direction of eic at grww., performing of necessary hydro-testing of the disc and body of 750 mm dia. pdv as per direction of eic at grww., lowering from the working-bay, installation, fitting-fixing of 750 mm dia. pdv in the existing pipe-bay removing the existing barrel-piece/flanges as per direction of the eic at grww., re-assembling and re-fitting all the components of the hydraulic system like counter weight, lever, arm, hydraulic unit etc. with the existing 750 mm dia. pdv installed in the pipe-bay parts by parts sequentially and cautiously as per direction of the eic at grww., test run, operation and commissioning of the entire system of 750 mm dia. pdv as per direction of the eic at grww.

Central Government/Public Sector

CTN :45010817

30 Jun, 2026 NA

Burnpur - West Bengal

Tender For bid to ras supply of 13 roll chocks d d - spacer ring0160019 41.047 , spacer ring0160019 41.048 , cover 0160019 41.039 , feather key 13600690 , split ring 13601011 , feather key 13601013 , fuse locking plate 13601030 , distance ring 13601031 , tensioning clamping ring 11576739 , segment ring 13601032 , segment ring 11512939 , fuse 13601033 , feather key 13601034

Central Government/Public Sector

CTN :45702792

02 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - 98050126: cond. & u/s. ms/ci/gi and scrap consisting of grs full box, grs half box, relay pannel box, bars, ms rod/angle/ channel/ pipe, cut pieces of ms flat, bm box, tie bar fencing, pipe fittings, coupling hook,tension rod, tmt rod,plate, p/m cover, door broken parts, ms stand, slide cover, ms/gi nut, bolt, lock nut,avtm, clamp, washer, lc gate parts and tap, mast, ms/gi telephone/light pole, gate, valve, cover hook, universal axle counter box, axle counter base plates, gear case,pump case, flat rod,rack, rottery key, grill, fencing, ladder, battery boxes, frames,fob frame/mesh net, ms boxes, ring, ct boxes, ground connection, beaters angle different sizes, da box, d bracket, stay adjuster, battery stand, rack, ci components , ladder platform, cls /signal post with or without base, fabricated rail used for fencing purposes, foot step, brake beam, ms rope, ms bond,ms board,gate,cut off angle cock, gravity cock, ms rod cut pieces, flushing valve, door closser, ms loco parts,surface base,pure iron flat, beam, and such other similar ms items with or without non ferrous and other attachments as is where is condition. note: (1) if any non- ferrous items found in loose in the location to be handed over to custodian at the time of delivery (2) crane/jcb loading permitted (3) segregation is not permitted, (4) cutting permitted strictly up to loadable size only at the time of delivery (5) delivery should be made location wise. purchaser should be permitted to take the materials from the next location after clearing the materials of one location. (6) electronic weighbridge capacity 30 mts only. hence purchaser should bring suitable vehicle so that the loaded weight should not exceed 28 mts at the time of delivery. location: in two locations :(1) bin-w-4 (2) w18 to w-23, near witness shed of scrap yard/ssd/ptj.

State Government

CTN :45669229

01 Jul, 2026 NA

Kangra - Himachal Pradesh

Tender For tender for supply of equipment material, design, erection, testing and commissioning for sop to improvement of distribution system of various lwss in electrical section silh under esd hpsebl majheen, ed jawalamukhi - muff for steel tubular pole with concrete filling aaac conductor 7/3.81, 80 sq. mm (includes 3 conductor length and additional 1% sag (sag, jumpering and wastage)) single continuous earth wire (g.i wire 8 swg) x-arm cl 100x50x6mm, length 2800 mm x 2 nos for incommer line x-arm cl 75x40x6 mm, length 2800 mm x 4 nos for supporting do fuse unit & go switch go switch handle supporting cl 75x40x5 mm, length 460 mm go ab switch unit (11kv, 400a, 25 ka) tripple pole ofd type do fuse unit cross-arm (channel iron (100x50x6 mm), length 1270 mm 11 kv pin insulators (porcelain, 12 kv, 10 kn): 3 no. per pole structure al (50x50x6 mm), length 750 mm x-bracing set -ms angle iron 50x50x6, length (2125 mmx2 no } pole top bracket (100x50x6 mm), length 100 mm ht stay set complete stay wire earthing set ht complete in all respect barbed wire (rec sp f 3-1981) half clamp steel tubular poles 9 mtr. long muffs with concerete filling distribution transformer 11/0.4 kv, 25 kva x-arm: [channel iron (100x50x6 mm), length: 2800 mm x 2 nos] ms angle iron (50x50x6 mm), length: 2800 mm x(1 nos for la's) x-arm: [channel iron (75x40x6 mm), length: 2800 mm x 4 nos] for supporting do fuse unit & go switch x-arm [channel iron (100x50x6 mm), length: 2800mm x 2 nos for transformer bed x-arm [channel iron (100x50x6 mm), length: 460 mm x 2 nos for supporting main channel of transformer ms angle iron (50x50x6 mm), length: 2800 mm x 2 nos ms angle iron 35x35x5 mm), length: 460 mm x 2 nos ms angle iron 50x50x6 mm), length: 950mm x 2 nos for bed knee bracing ms angle iron (50x50x6 mm), length: 2800mm x 2 nos for lt distribution box and go switch assembly ms angle iron (50x50x6 mm), length: 450 mm x 1 nos for lt distribution box and go switch assembly go switch handle supporting: [channel iron (75x40x6 mm), length:460 mm

State Government

CTN :45671186

30 Jun, 2026 NA

Kangra - Himachal Pradesh

Tender For supply of material as per annexure-i , is required in operation circles working under chief engineer (op.) kangra zone, dharamshala - stay clamp:- stay clamp:- fabrication and supply of stay lamps made of only tata/sail/rashtriya ispat or as per is 2062/2006,2011 with latest amendments if any ms flat 50x6mm along with 3sets of ms nuts and bolts and washers size 75x16mm duly painted with one coat of red oxide and one coat of black japan paint suitable for 9/10 mtr steel/pcc poles (approx wt. 4.0kg)

State Government

CTN :45669224

01 Jul, 2026 NA

Kangra - Himachal Pradesh

Tender For tender for supply of equipment material, design, erection, testing and commissioning for sop to jsv by prov. 11 0.4 kv, 25 kva dtr at bohal khalsa a w 11 kv ht line in electrical section bharoli under esd hpsebl noi jawalamukhi, ed jawalamukhi - aaac conductor 7/3.81, 80 sq. mm (includes 3 conductor length and additional 1% sag (sag, jumpering and wastage)) single continuous earth wire (g.i wire 8 swg) cross-arm {channel iron (100x50x6 mm), length 1270 mm} 11 kv pin insulators (porcelain, 12 kv, 10 kn): 3 no. per pole structure ai (50x50x6 mm), length 750 mm x-bracing set -ms angle iron 50x50x6, length (2125 mmx2 no } pole top bracket (100x50x6 mm), length 100 mm ht stay set complete stay wire earthing set ht complete in all respect barbed wire (rec sp f 3-1981) half clamp full clamp danger plate (250x200x1.6 mm) nuts & bolts off sizes 2001

Private Sector

CTN :45666340

04 Jul, 2026 NA

Jhajjar - Haryana

Tender For m4761056624 m p o plate & liner aasy, xrp 1003 , m4761056058 bull ring clamping ring: xrp 1003 mill , m4761056227 labyrinth seal for xrp 1003 mill

Clamping Ring Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors