Latest classifier Tenders | Government classifier Tenders

State Government

CTN :45421272

13 Jun, 2026 NA

Bulandshahr - Uttar Pradesh

Tender For providing of tentage service lumpsum based - outdoor gatherings, social gatherings, social gatherings, lighting floorings, tent rentals, furniture & equipment rentals, power supply, logistics & delivery, maintenance & support, safety measures, dismantling and rem..

CTN :45404122

09 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

CTN :45420638

13 Jun, 2026 NA

Ganderbal - Jammu And Kashmir

Tender For providing of tentage service lumpsum based - outdoor gatherings; floorings, lighting, tent rentals, theme based installation, decoration, furniture & equipment rentals, power supply, logistics & delivery, maintenance & support, safety measures, dismantling and re..

CTN :45421588

12 Jun, 2026 NA

Shahjahanpur - Uttar Pradesh

Tender For providing of tentage service lumpsum based - social gatherings; lighting, floorings, tent rentals, furniture & equipment rentals, power supply, logistics & delivery, maintenance & support, safety measures, dismantling and removal

CTN :45421514

15 Jun, 2026 NA

Kushinagar - Uttar Pradesh

Tender For providing of tentage service lumpsum based - social gatherings, more than 2000 marriage in the events; tent rentals, lighting, furniture & equipment rentals, decoration, theme based installation, power supply, dismantling and removal, photography videography self..

Central Government/Public Sector

CTN :45389599

30 Jun, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For the different mechanical work of 'dismantling of loco equipment / sub assemblies' of wap7 and wag9 locomotive at electric loco shed ghaziabad.

Central Government / Public Sector

CTN :45400990

10 Jun, 2026 NA

Secunderabad - Telangana

Tender For auction sale of others - 81503-26-05-07-hyb-sc-w o p: - scrap unserviceable condemned press line web offset printing machine (one number) consisting of 4 units front and back, 3 unwinding units,1 plate folding,1 plate punching, 1 control panel,1 electrical panel,3 reel shafts, 1delivery unit without quarter folder ( not for sale=1 no. quarter folder)2 electrical motors ( 1 hp and 45 kw), chiller unit approximate weight of the machine=15mt. available under the custody of sse/general printing press/sc. location: - general printing press secunderabad. ds-8 no.081503-26-00045 dated 23-04-2026. delivery by as is where is basis by number, state telangana, pl no. 98322497 hsn code 72044100 refer to depot conditions for gstin of state railways, list of holidays and other conditions. [1]. in order to make assessment the purchaser may visit the lot location and inspect the lot and satisfy themselves before bidding [2]. post auction no representation shall be entertained. [3]. weight shown is indicative and no claim can be made for delivery in weight. [4]. gas cutting is permitted [5]. purchaser has to make his own arrangements such as tools, lifting tackles, lifting equipment such as crane, gas cutting equipment and necessary trained men for dismantling, cutting & loading [6]. the purchaser is responsible for providing adequate safety firefighting equipments on the spot at the time of cutting and delivery. [7]. the purchaser shall be liable to make good any damage loss caused to railway property during cutting and delivery.

Central Government/Public Sector

CTN :45373172

09 Jun, 2026 NA

Multi City - Multi State

Tender For providing of tentage service lumpsum based - exhibitions, outdoor gatherings, bedding facilities; floorings, lighting, tent rentals, theme based installation, decoration, furniture & equipment rentals, power supply, dismantling and removal, safety measures

Central Government / Public Sector

CTN :45311469

08 Jun, 2026 NA

Panipat - Haryana

Tender For corrigendum : procurement of rotex make product classifier/ separator spares - list of item(s) / work(s) as per tender documents, linked belt drive,p/n:p0710410162, crankpin assembly 80series p/n:24422 kit, wear plate slider uhmw12"/14" p/n 126606, carbon slipper ball,p/n:27153,rotex, slide ball socket ,p/n:27184,rotex, slide plate ,p/n:17155,rotex, epdm seal strip,p/n:132168, mach tool tension spring 410ss,p/n:49904, white neoprene ball,p/n 30583, slide brg assy 50,greased,p/n:63447, outer shield cstg,p/n:64294

CTN :45374531

09 Jun, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no. divn/s-yd/35/05/26-27/bg/cond./8w/coaches. description - iron and steel scrap cutup parts of bg cond./8w/coaches with n.f attachment without contents if any. 1) special repair 056903 wgaccn 2)se 058106 wgaccn nb: [1]. (a) all coaches are to be sold without 08 nos. wheel sets complete alongwith roller bearing with bio tanks and other excluded fittings as per latest excluded fitting list no.m2/c-19/excluded fittings/coach/1271 dt.13.09.2018. (b) the coaches are to be sold without 02 nos. serviceable bogies against special repairl no: 01-01 ( bogie end-2) and special repairl 02-01 ( bogie end-1) (c) the coaches are to be sold with 02 nos. unserviceable bogies without excluded fittings. against special repairl no: 01-01 and 02-01. nb[2]: special condition for rolling stock- a) all excluded fittings including wheel sets and bogie, if any, are to be handed over by the purchaser at the specified location for which the purchaser have to arrange labour/tools/ equipment for loading of the excluded fittings from cutting site and then transport it to specified location by their own arrangement/vehicle. they have to unload and stack the excluded fittings by their own arrangement including labours and hand over the same to: - (i) sse 27-28 bogies, coil spring, screw coupling, buffer sets etc. (ii) sse-19,wheel sets. (iii) sse-30, dv, aux reservoir, cr, common pipe bracket,alu. water tank, bmbc, etc. (iv) sse-29 bio tank. (v) sse-51 battery, fan, alternator, etc. (vi) sse-55 (all ac items) to hand over to concern stock holder with clear acknowledgement. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. b). delivery witnessing official will ensure that such nil value items has been cleared by purchaser before taking cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) delivery witnessing official will record following certificate on sale delivery register ¿purchaser clear all nil value items arisen after cutting of sold rolling stock and there is no left over available at cutting site (c) the rolling stock may either be on the cutting line or grounded and may or may not have trolley/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. nb:-[3] 08 nos. wheel sets complete along with roller bearing, 02 nos seviceable complete bogies, bio tanks and other excluded fittings are to be handed over by the purchaser at specified location as advised by concerned sse. nb:[4] delivery will be given in numbers. nb: [5] the purchaser is required to take adequate safety measures so that no railway property is near vicinity of the cutting spot is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery. and the purchaser will be solely responsible of any loss applied ( railway employee or any other person) caused due to any activities involved while dismantling /cutting, of the coaches, transportation loading and unloading of all excluded fittings of the coaches . including wheel sets and trolleys.

Classifier Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government / Public Sector