Latest classroom repair Tenders | Government classroom repair Tenders

State Government

CTN :41094710

25 Jul, 2025 11.01 Lacs

Shimla - Himachal Pradesh

Tender For repair/renovation to various residential buildings under division no iii shimla. (sh -construction of steel pedestal for providing water tank for q-2 block set no 105-112 at nabha estate shimla.)

Central Government / Public Sector

CTN :41103294

06 Aug, 2025 NA

Sambalpur - Odisha

Tender For trd related work in connection with(1)replacement of 10 nos. of steel girder bridges of span 12.20 mtr by psc slab in dfr-thv section of sambalpur division(2)construction of rub/lhs in liu of trespassing location near km-311/29-31 in bmck-thv block section, km-308/29-31 of bmck-thv block section, near km 18/12-13 in ljr-bwip section, near km-257/5-7 of amb-ljr block section, near km-320/35-37 of bmck-thv block section (3) construction of rub/lhs in liu of lc-rv-230 at km 293/0-1 in mngd-bmck block section, lc-rv-228 at km-290/33-291/01 in mngd-bmck block section, lc-rv-220 at km-276/25-27 in dklu-mngd block section, lc-rv-217 at km 270/10-12 in amb-dklu block section, lc-rv-205 at km-249/1-2 in nrlr-ljr block section in sambalpur division.

State Government

CTN :41085914

30 Jul, 2025 NA

Tarn Taran - Punjab

Tender For providing installing deep tubewell 250 mm id straight 150 mtr depth with hand bore 20 mtr stainless steel strainer , pumping machinery, chlorinator, construction of pump chamber 3.05x3.70.with wc, construction of one no. ohsr 100 kl capacity

CTN :41084927

22 Jul, 2025 NA

Kurung Kumey - Arunachal Pradesh

Tender For 01 x supply and constr and construction of double storey office shelter using light gauge steel structure (lgss) technology

CTN :41075649

28 Jul, 2025 NA

Gurdaspur - Punjab

Tender For supply of e work in excavation in foundation trenches or drains i c dressing of slides , providing and laying of position cement concrete 1 5 10 , back filling , sand filling under floor , providing and laying dpc 40mm thick with cement concrete 1 2 4 , bric brick work with bricks of class designation in foundation with cement mortar 1 4 , brick work in super structure cm1 4 , half brick masonary cm 1 4 , rrc in s floor , c s centering and shuttering , rainforcement for steel work , p f windows of z section , p f door of standard wood iron , p f glazed tiles for walls , p f glazed tiles for flooring , 12 mm cement plaster of mix 1 6 , 15 mm cement plaster of mix 1 6 , 6 mm cp to ceiling of mix 1 3 , finishing walls with water proofing cement paint , white wash , making plinth protection , cement concrete 1 2 4 , pf gi pipe 15 mm internal work ls 30 , pf gi pipe 20 mm external work ls 30 , pf sw pipe up to steptic tank ls 30 , pf water closet with pvc cistern 6 indian type , pf water closet with pvc cistern 6 european type , pvc water tank , pf wash basin , pf brass bib 6 nos , pf stopcock 6 nos , constructing soak pit 1 point 5x 1point 5 x 1 point 5 filled with brickbats inckuding sw drain pipe 100 mm diameter and 1 point 20m long complete as per standard design , providing and fixing brass fitting like bib cock stop cock ball cock and angle valve etc complete as per requirement of site , construction of septic tank of size 2 point 0 x 1 point 5 x 1 point 8 mtr as per standard design and complete

CTN :41095290

23 Jul, 2025 31.58 Lacs

Rohtak - Haryana

Tender For construction of cc streets near house of ramesh munjal and near house of mahender singh in geeta colony, near house of shanti sadan via munjal steel and near chawla sadan in jagdish colony and h/o manoj makkar to h/o ahuja in dlf colony and h/o karan

CTN :40901143

22 Jul, 2025 NA

Bathinda - Punjab

Tender For corrigendum : mechanical construction of various steel storage tanks at hpcl 2g ethanol bio refinery project bathinda punjab

CTN :41067137

21 Jul, 2025 NA

Lakshadweep - Lakshadweep

Tender For procurement and supply of play equipments furnitures and chairs under amini division amini kadamat chetlatand kiltan - providing & supplying of best quality plastic junior study set: gloss-finished, durable virgin plastic construction. the set includes a storage box with a foldable lid and a pencil slot, ideal for kids within the age group of 3 to 5 years. dimensions - chair: width 33.5 cm, depth 39.5 cm, height 61 cm; table: width 51 cm, depth 38 cm, height 51 cm. the weight of the set is 4 kg. brands: nilkamal, cot and candy, supreme, or equivalent, providing & supplying of best quality toy jungle plastic baby arm chair: made from virgin plastic, this kids rocker chair features horse face armrests. dimensions - width: 33 cm, depth: 57 cm, height: 48 cm. weight: 0.68 kg. brands: nilkamal, cot and candy, supreme, or equivalent. quantity and rates to be specified and quoted by the supplier., providing & supplying of best quality table made of engineered wood (brown colour) with cabinets: this table has a width of 120 cm, depth of 60 cm, and height of 75 cm. it weighs 37.64 kg, providing & supplying of fmm jungle theme mini cabinet (beach & pastel orange): this cabinet has a width of 59 cm, depth of 35 cm, and height of 122.5 cm. it weighs 11.0 kg, providing & supplying of mini (fmsj) jungle theme kids plastic storage cabinet (beach/pastel orange): this storage cabinet has a width of 59 cm, depth of 35 cm, and height of 63.5 cm. it weighs 6 kg, providing & supplying of baby playpen ball pool kids activity centre safe & spacious play yard for home with lockable gate, providing & supplying of the nilkamal genius ludo table (milky white) is a durable, plastic table designed for kids, featuring a square top with in-foil lamination that includes games like ludo and snakes & ladders, as well as educational elements like numbers, alphabets, and a poem. with dimensions of 48 x 48 x 41.5 centimeters, its compact and requires basic assembly. ideal for study, play, and creative activities, this table provides hours of fun and learning for children., providing and supply of the nilkamal smilo kids activity table (crate red) is a versatile and durable piece of furniture designed for childrens activities. it features a bean-shaped top made from high-density polyethylene (hdpe) and a powder-coated chromed mild-steel frame, ensuring sturdiness and easy maintenance. with dimensions of 60 x 90 x 74.5 centimeters, it is ideal for classrooms, play areas, and recreation spaces. the table is safe, non-toxic, and perfect for writing, drawing, or playing desk games, providing and supplying nilkamal eeezy go plastic arm chair (peach), a durable and lightweight chair made from 100% polypropylene material. the chair features an ergonomic design with supportive armrests and a wing-like structure for added comfort. it has a weight capacity of 125 kilograms and dimensions of 66 x 60 x 74 centimeters. ideal for both indoor and outdoor use,, providing and supplying nilkamal 50 litre multipurpose storage box with lid (orange and yellow), a high-quality and long-lasting plastic storage box with a spacious 50-litre capacity. the box features a simple, lightweight design with a handle and lid, making it perfect for holding clothes, toys, and accessories. its dimensions are 60 x 40 x 31 centimeters, and it weighs 2 kilograms., providing and supplying super garden swing & slider for kids, a versatile plastic baby slide and swing combo with a 4-inch baby basketball toy. this 3-in-1 playset includes a seamless slide, a sturdy swing, and an integrated basketball hoop, designed for both indoor and outdoor use. the set is crafted from high-quality, en71-certified plastic, ensuring safety and durability. with dimensions of 163 cm in length, 163 cm in width, and 110 cm in height, it offers a spacious and engaging play area for children aged 1 to 5 years, providing & supplying of best quality sea saw (two seated) having unit s

CTN :41082911

22 Jul, 2025 10.10 Crore

Patna - Bihar

Tender For mgsy/25-26/teghra/02 - construction of h.l rcc bridge ( 6 x 18.75 m) over river balan in between pwd road to mujahidpur ( maheshpur- gehuni ghat per balan nadi par pul ) under bhagwanpur block in the district of begusarai, excavation for structures , earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. up to 3.00 m depth ., levelling course for pile cap , providing and laying of pcc m15 levelling course 100mm thick below the pile cap., providing and laying reinforced cement concrete as per drawing and technical specifications clauses 800, 1205.4 and 1205.5 , rcc grade m -35 in pile cap, bored cast in situ piles r.c.c m-35 , pile excluding reinforcement complete as per drawing and technical specification and removal of excavated earth with all lift and lead up to 1200 m, supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawing and technical specifications , tmt in foundation , refer bbs ,qty = 54.273+16.411+74.929+ 29.651= 175.264, 6mm thick. steel liner as per drawing and technical specification ., providing and constructing temporary island 16 m diameter for construction of well foundation for 8m dia. well. assuming depth of water 1.0 m and height of island to be 1.25 m including royality for earth @ rs. 3768.00 for each island., pile load test on single vertical pile in accordance with is:2911(part-iv) 1985, a) initial load test @ 2.5 times load on 1 pile, c) lateral load test, confirmatory boring at abutment and pier location, back filling behind abutment, wing wall and return wall complete as per drawing and technical specification, providing and laying of filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of morth specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification., plain/reinforced cement concrete in sub-structure complete as per drawing and technical specificationsheight upto 5m , rcc grade m30, plain/reinforced cement concrete in sub-structure complete as per drawing and technical specifications ,rcc grade m30 , height 5m to 10m, supplying, fitting and placing hysd bar reinforcement in sub-structure complete as per drawing and technical , reinf qty = 20.810+28.454+1.762+0.313+1.289+1.139 =53.77, providing weep holes in brick masonry/plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia ac pipe, extending through the full width of the structure with slope of 1v :20h towards drawing foce. complete as per drawing and technical specifications, supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications., furnishing and placing reinforced/prestressed cement concrete in super-structure as per drawing and technical specificatio,rcc grade m 30, height 5m to 10m, reinforeced cement concrete m30 grade approach slab including reinforcement and formwork complete as per drawing and technical specification, pcc m15 grade leveling course below approach slab complete as per drawing and technical specification, construction of rcc railing of m30 grade in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical rcc post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as

CTN :41082914

22 Jul, 2025 4.44 Crore

Patna - Bihar

Tender For (nabard)/25-26/rajauli/01 - 1) name of work: construction of hl rcc bridge over khuri river in gram panchayat bakshanda, earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. upto 3.000 m depth, providing and constructing temporary island 16 m diasmeter all complete job as per specifiactions and direction of e/l, providing service road etc. all complete job as per specifications and direction of e/i., providing steel liner 6 mm thick for piles including fabricating and setting out as per detailed drawing., bored cast-in-situ m35 grade r.c.c. pile excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m., dismantling of reinforced concrete pile head complete as per drawing and technical specification, providing and laying of pcc m15 levelling course 100mm thick below the pile cap., cement concrete for reinforced concrete m - 35 in pile cap complete as per drawing and technical specification, supplying, fitting and placing un-coated hysd bar reinforcement in foundation complete as per drawing and technical specifications., providing rcc m30 mechanically mixed concrete in abutment shaft & pier shaft with stone aggregate 20 mm nominal size and clean coarse sand of fm-2 .all complete job as per design upto 5 m height, supply fitting & fixing elasto-meric bearing & seismic pad :-- supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications. elastomeric bearing & pad, providing weep holes in abutment cap with 100mm dia ac pipe:-- providing weep holes in brick masonry/plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia ac pipe, extending through the full width of the structure with slope of 1v :20h towards drawing foce. complete as per drawing and technical specifications., supplying, fitting and placing hysd bar reinforcement in substructure complete as per drawing and technical specification., back filling behind abutment, wing wall and return wall, complete as per drawing and \technical specification.(sandy material ), providing and laying of filter media with granular materials/stone crushed aggregate satisfying the requirement laid down in ci. 2504.22 of morth specification of not less than 600mm behind abutment, wing and return wall to the full height compacted., providing rcc m 30 grade & super structure :--furnishing and placing reinforced/ prestressed cement concrete in super-structure as per drawing and technical specification beyond 5 m and upto 10m hieght (t beam slab), providing hysd bar in all types of rcc work:-- supplying, fitting and placing hysd bar reinforcement in super-structure complete as per drawing and technical specifications ., wearing coat :-- providing and laying cement concrete wearing coat m-30 grade including reinforcement complete as per drawing and technical specifications, providing rcc m30 grade in railing:-- construction of precast rcc railing of m30 grade, aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical rcc post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications., providing drainage spout:-- drainage spouts complete as per drawing and technical specification, providing pcc m15 grade below approach slab:-- pcc m15 grade leveling course below approach slab complete as per drawing and technical specification, providing pcc / rcc m30 in approach slab:-- reinforced cement concre

Classroom Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government / Public Sector

State Government