Latest clay brick Tenders | Government clay brick Tenders

CTN :45737861

15 Jul, 2026 15.00 Lacs

Kheri - Uttar Pradesh

Tender For supply of special heavy duty costable refractory suncast make al2o3 45 percent , good quality fire cement temp above 1200 c , maxcrete super costable refractory as per detail alumina ai2o3 85 percent above, silicon 5 percent below, iron 1 to 2 percent suitable for 1200c temp mahakoshal make , special fire tiles as per detail temp 1200 c ai2o3 grade is type i size 306 x 306 x 50mm each weight 9 kg , special fire tiles as per detail temp 1200c ai2o3 grade is type i size 550 x 306 x 50mm each weight 16 kg , special fire m tiles as per detail temp 1200c ai2o3 grade is type i size 700 x 306 x 50mm each weight 20 kg , special fire bend tiles 45 as per detail temp 1200c ai2o3 grade is type i size 306 x 306 x 50mm each weight 9 kg , ceramic blanket density 100 percent thick 1 inch , cold insulation brick size 9 inch x 4 half 5 inch x 3 inch , special standard fire brick temp 1200 c ai2o3 45percent, end arch brick size 9 inch x 4 half 5 inch x 3 inch each weight 3 half 75kg , special fire brick temp 1200 c, al2o3 45 percent , end arch brick size 9 inch x 4 point 5inch x 3inch x 2 3 over 4 inch each weight 3 point 75kg , special fire brick temp 1200c, al2o3 45percent, end arch brick size 9inch x 4 point 5 inch x 2.5inch x 3inch each weight 3 point 75kg , special 20 ton boiler hanging arch fire brick temp 1200c, al2o3 45percent, end arch brick, thickness 50mm, each weight 10kg

CTN :45686841

09 Jul, 2026 9.50 Lacs

Umaria - Madhya Pradesh

Tender For inviting yearly material supply rate for nagarpalika parishad shahdol as per nit rate for the year 2026-27 (burnt clay bricks, fly ash bricks, sand, metal 20mm, metal 40 mm)- burnt clay bricks , fly ash bricks, , sand, , metal 20 mm, , metal 40 mm

State Government

CTN :45696571

03 Jul, 2026 NA

Birbhum - West Bengal

Tender For fixation of local market rate (lrm) for supplying of materials (construction plantation materials) for mgnrega work under murarai-ii development block - coal (steam), bitumen vg-30, bitumen emulsion, hire charges of diesel road roller- 8 to 10 tonne, diesel oil, stone screening type a (13.2 mm), stone screening type b (11.2mm), coarse sand, stone aggregate(single size): 06 mm nominal size, grade 1 stone metal 63 mm to 45 mm, 1st class picked jhama bricks(traditional), coloured inter locking c.c. paver block, fine sand, silver sand, portland cement, 1st class traditional bricks (kiln burnt), fly ash bricks(traditional), modular fly ash bricks, modular clay bricks, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 40 mm nominal size, precast cement concrete blocks (nominal mix. 1:1.5:3 with 20 mm down coarse aggregate including supplying at site, laying and finishing the top surface with 1:3 cement mortar), medium sand, udaypur marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, udaypur marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., rectified - ceramic glazed tiles ist quality 300 x 300 mm or more in all shades designs white, ivory, grey, fume red brown etc, vitrified floor tile 60x60 cm, precast chequered cement tiles 22 mm thick dark shade using ordinary cement, water proofing materials, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), hire charges of 5 kva generator, hire charges of 3 kva generator, hire charges of monkey set, hire charges for 5 hp with operator,fuel and shifting etc all charges complete, surface vibrator, water tanker 5000 ltr. capacity, r.c.c. pipes np2 class 300 mm dia, r.c.c. pipes np2 class 450 mm dia, rcc pipe 600 mm dia np- 3 spigot, rcc pipe 900 mm dia np - 3 spigot, rcc pipe 1000 mm dia np -3 spigot, rcc pipe 1200 mm dia np - 3 spigot, empty gunny bag, bamboo (8cm-10cm dia) including fixing, nail, sal bullah (7.5cm -10cm dia), eucalyptus bullah (7.5cm -10cm dia), sal bullah (12.5cm -15cm dia), sal bullah (17.5cm -20cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), sausage wire net, mild steel tubes hot finished seamless type, galvanised steel corrugated sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, g.i limpet washer, bitumen washer, galvanised steel plain sheets, seam bolts and nuts 6 mm dia and 25 mm long, g.i. plain washer for seam bolts, stainless steel bolts /square bar and plates, welding by electric plant, false ceiling (with 4mm thick pearl designer fibre cement board), supplying, fitting & fixing asbestos corrugated sheet(6 mm thick), supplying, fitting & fixing asbestos ridging, supplying, fitting & fixing zn-al alloy steel sheet work in roof, supplying, fitting & fixing aluminium sheet ridging, fitting and fixing glass reinforced polyester translucent fiber glass sheet, fitting and fixing glass reinforced polyester translucent ridging, fitting & fixing circular corrugated aluminium sheet, tor steel rods/hysd bars/tmt bars (sail/tata/rinl) (fe415/fe500/fe500d conforms to is: 1786), tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is: 1786), tor steel rods/hysd bars/tmt bars (other than sail/tata/rinl/jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is: 1786), brick aggregate (single size):40 mm nominal size, moorum, loading unloading & stacking lime, moorum, building rubish and similar miscellaneous material, stone a

State Government

CTN :45678444

01 Jul, 2026 NA

Birbhum - West Bengal

Tender For fixation of local market rate of material items for implementation of mgnrega schemes under rampurhat ll development block - technician, helper (technician), coolie, carriage of tar bitumen, carriage of stone aggregate below 40 mm nominal size, carriage of steam coal, carriage of stone aggregate 40 mm nominal size and above, 1st class picked jhama bricks(traditional), carriage of soling stone & masonry stone, coloured inter locking c.c. paver block, fine sand, silver sand, 1st class traditional bricks (kiln burnt), coarse sand, fly ash bricks(traditional), modular fly ash bricks, modular clay bricks, stone aggregate(single size): 40 mm nominal size, medium sand, water proofing materials, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), hire charges of 5 kva generator, hire charges of 3 kva generator, hire charges of monkey set, hire charges for 5 hp with operator,fuel and shifting etc all charges complete, surface vibrator, water tanker 5000 ltr. capacity, carriage of r.c.c. pipes 600,700,750 & 800 mm dia, carriage of r.c.c. pipes 900 mm dia, carriage of r.c.c. pipes 1000 mm dia, carriage of r.c.c. pipes 1200 mm dia, eucalyptus bullah (7.5cm -10cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), welding by electric plant, brick aggregate (single size):40 mm nominal size, moorum, carriage of carriage of moorum, stone aggregate(single size):63 mm nominal size, river bed material, fitter(grade1), brick aggregate (single size):50 mm nominal size, hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings, hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings, hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings, thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), nylon net, paddy straw, g i wire, stone boulder ( 225mm-150mm ), stone boulder( 225 mm above ), laterite boulder, carriage of cost of neelgiri/maxican grass truf sqm, wood dust, sal silliguri, sal malaysia, neem wood, other local wood, ordinary teak wood, sisu/gamar wood, local sal wood, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 kg/ sqm), float glass sheet of nominal thickness 8 mm (weight not less than 20.00 kg/sqm), bright finished or black enamelled mild steel screws 40 mm, bright finished or black enamelled mild steel screws 20 mm, bright finished or black enameled mild steel butt hinges 50x37x 1.50 mm, bright finished or black enameled mild steel butt hinges 75x47x 1.70 mm, bright finished or black enameled mild steel butt hinges 100x58x 1.90 mm, hydraulic door closer tubular type aluminium section body, brass 150 mm floor door stopper (0.357 kg), anodised aluminium hanging type door stopper, malayasia sal cleat, chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles, frp composite door frame 66mm x 90mm, frp composite door frame 66mm x 70mm, 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage, supplying,fitting & fixing of 2-track / 3-track aluminium sliding window, supplying, fitting & fixing of partly glazed partly paneled or fully glazed single leaf aluminium swing door, supplying, fitting & fixing of aluminium fixed partition wall of all aluminium sections, supplying solid flush type doors of commercial quality, white cement, coal tar, carriage of steel, r.c.c ventilator of 20 mm. thick upto 0.10 sq.m. area, r.c.c ventilator of 20 mm. thick above 0.10 sq.m. area, fan hook, chlorinated polyvinyl - chloride (cpvc) pipe 15 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 20 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 25 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 32 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 40 mm outer dia,

Central Government/Public Sector

CTN :45704468

17 Jul, 2026 NA

Jaduguda - Jharkhand

Tender For supply of clay bricks, size: 230 mm x 110 mm x 75 mm

State Government

CTN :45411968

29 Jun, 2026 35.00 Lacs

Doda - Jammu And Kashmir

Tender For corrigendum : construction of engineering workshop and testing lab including procurement of lab instruments at dam site of bhep. - earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed ordinary rock, 1 meter from cutting edge, providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1 :3 (1 cement : 1 coarse sand : 3 graded stone aggregate 20 mm nominal size), steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level thermo-mechanically treated bars of grade fe-500d or more., filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m., centering and shuttering including strutting, propping etc. and removal of form work., lintel, beams, plinth beams, girders, bressumers and cantilevers., columns, pillars, piers, abutments, posts and struts., structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. welded, providing corrugated g. s. sheet roofing including vertical/curved surface fixed with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2, providing ridges or hips of width 60cm overall width plain g.s. sheets fixed with polymer coated j. or l hooks, bolts and nuts 8mm dia g.i. limpet and bitumen washers complete. 12.4.3 0.50 mm thick with zinc coating not less than 275 gram/m2, painting on g.s sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on new work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution., brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :cement mortar 1:6 ( 1 cement : 6 coarse sand), extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level, 15mm cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand), providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. with galvanized m.s. wire gauge with wire of dia 0.63 mm with 12 mm mild steel u beading, p/f in existing frames 30mm th

CTN :45650745

07 Jul, 2026 4.90 Lacs

Nanpara - Uttar Pradesh

Tender For supply of ci beam , ci secondary air nozzle , ci nozzle for boiler furness , ci hanger , ci roof bar , ci link bar for furnace , b type female , c type middle rhs , d type middle rhs , e type packing rhs , f type packing lhs , ci clit for 30 tph , c type middle , b type lsh , ci clit of hanger , ci coupling , ci coupling for boiler , ci idler pully , ci washer for brick holding , ci scraper for mill top roller , ci scraper for mill discharge roller , ci cross , ci coupling for magma , ci v belt pulley b groove , ci v belt pulley for bagasse spreader , ci v belt pulley b groove , ci guard cover for side roller * /bid number : gem/2026/b/7697502 + /dated: 22-06-2026 ' ' / bid document 1 / 25

CTN :45647925

08 Jul, 2026 3.55 Lacs

Saharanpur - Uttar Pradesh

Tender For supply of fire bricks for boiler arch for small hanger specification as per sketch kcsf 224 90 15 nos , fire brick for boiler arch for small hanger specification as per sketch kcsf 225 90 15 nos , t bricks no 5 bl 14350 fire bricks for boiler arch specification as per sketch kcsf 226 90 15 nos , t fire bricks 5bl 14354 t fire bricks for boiler arch specification as per sketch kcsf 230 90 15 nos , 5br 14354 fire bricks for boiler arch specification as per sketch kcsf 228 90 15 nos , 5bl 14354 fire bricks for boiler arch specification as per sketch kcsf 227 90 15 nos , castable refractory above 45 persant alumna required in 50 kg bag , fire bricks for boiler arch specification as per sketch kcsf 223 90 15 nos , fire bricks for boiler arch specification as per sketch kcsf 219 90 15 nos , fire bricks as per specification kcsf 160 86 15 nos , special fire bricks for w i l boiler suspended for arch specification as per sketch kcsf 241 91 300 nos , 5 bl 14356 fire bricks for suspended arches for w.i.l boilers specification as per sketch kcsf 71 82 300 nos , m tile for boiler number 1 superheater as per sketch 496 26 30 nos , accoset 50 , white heat k castabpnle refractory

CTN :45666253

09 Jul, 2026 3.55 Lacs

Saharanpur - Uttar Pradesh

Tender For supply of fire bricks for boiler arch for small hanger specification as per sketch kcsf 224 90 15 nos , fire brick for boiler arch for small hanger specification as per sketch kcsf 225 90 15 nos , t bricks no 5 bl 14350 fire bricks for boiler arch specification as per sketch kcsf 226 90 15 nos , t fire bricks 5bl 14354 t fire bricks for boiler arch specification as per sketch kcsf 230 90 15 nos , 5br 14354 fire bricks for boiler arch specification as per sketch kcsf 228 90 15 nos , 5bl 14354 fire bricks for boiler arch specification as per sketch kcsf 227 90 15 nos , castable refractory above 45 persant alumna required in 50 kg bag , fire bricks for boiler arch specification as per sketch kcsf 223 90 15 nos , fire bricks for boiler arch specification as per sketch kcsf 219 90 15 nos , fire bricks as per specification kcsf 160 86 15 nos , special fire bricks for w i l boiler suspended for arch specification as per sketch kcsf 241 91 300 nos , 5 bl 14356 fire bricks for suspended arches for w.i.l boilers specification as per sketch kcsf 71 82 300 nos , m tile for boiler number 1 superheater as per sketch 496 26 30 nos , accoset 50 , white heat k castabpnle refractory

Central Government And Public Sector

CTN :45611549

09 Jul, 2026 NA

East Champaran - Bihar

Tender For supply and application of refractory castable materials and related materials, along with repair and maintenance on door delivery basis at hbl plant sugauli - supply and application of refractory castable materials and related materials, along with repair and maintenance on door delivery basis at hbl plant sugauli, as per the below details and attached tender document:, supply of fire crete super (medium purity dense castable)packaging type: packet, type: 70% alumina castablechemical: al2o3 (68% to 72%), cao (5.2% to 6.2%), fe2o3 (4.8% to 5.5%)nature of bond: hydraulicmax. service temperature: 1450 deg cel. or morepackaging size: 25 kgstate: dry powderedmake: calderys india refractories ltd / trl krosaki refractories limited / dalmia ocl, supply of refractory mortarproduct class: refractory monolithictype: 50% alumina mortar (coarse)chemical: al2o3 (45% to 50%), fe2o3 (3.8% to 4.8%)nature of bond: chemical / ceramicmax. service temperature: 1500 deg cel. or morepackaging size: 25 kgstate: drymake: calderys india refractories ltd. / trl krosaki refractories limited / dalmia ocl, tiles for boiler roof and bank zone side wall (both sides),size: 300 mm 300 mm 50 mm,quantity: 500 nos. (male female),as per the approved sample (sample collection under the supplier s scope)., repairing / replacement of damaged tiles to new tiles (approx. 300 nos)a. boiler bank zone (both sides)b. boiler roof, dismantling of old refractory & application of new castable refractory masonry work as per below scope of works.the broad scope involves complete dismantling and disposal of old refractory material and application of new castable refractory masonry in specified zones. the scope includes, but is not limited to, the following:dismantling of old refractory: removal of damaged, worn-out, or unserviceable old refractory material (brick, castable, insulation, etc.). manual/mechanical chipping and demolition as per site condition. collection, segregation, and safe disposal of dismantled refractory debris to the designated location inside the plant premises as directed by the engineer-in-charge. cleaning and surface preparation of the exposed area for new refractory lining. inspection and reporting of any damages to anchoring systems or structural parts.installation of new castable refractory: supply of new refractory shall be in hbl scope. surface cleaning and preparation prior to refractory application. mixing of castable using approved method (with pan mixer or mechanical mixer) and maintaining required water ratio. application of castable refractory using shuttering/moulds or free hand as per site requirement. compaction using poker vibrators for ensuring proper density and bonding. curing of refractory as per technical data sheet (tds) of the manufacturer minimum 24-48 hours water curing. removal of shuttering, inspection, and touch-up wherever required. final drying and heating-up (if in scope) under supervision of oem/engineer-in-charge., filling of ceramic wool.

Clay Brick Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

State Government

Central Government And Public Sector