Latest clay powder Tenders | Government clay powder Tenders

Central Government And Public Sector

CTN :45397473

22 Jun, 2026 59.47 Lacs

Almora - Uttarakhand

Tender For supply of material for sr to dandeshwar temple, jageshwar district almora-uttarakhand, under the jurisdiction of dehradun circle of archaeological survey of india as specified in boq - supply of material for sr to dandeshwar temple, jageshwar district almora-uttarakhand, under the jurisdiction of dehradun circle of archaeological survey of india as specified in boq, stone aggregate 20mm nominal size, coarse sand free from dust, portland cement 50kg bag, local stone patal 20 to 30mm thick, fine sand free from dust, hiring of bamboos 50 to 75mm dia 20ft height, deodar wood cut & roughly dressed to size as specified by site-in-charge, nut bolt fastners 8mm thickness 12 to 15cm length, nails 4, fevicole marine, sand paper, structural steel section 50x10 truck kamani patta, galvanized iron sheet 0.50mm thickness, copper sheet 20 gauge minimum 2ft width & 8ft length, copper nails 25mm, copper plain washers, melamine matt clear polish, synthetic enamel paint, thinner, unslaked lime, surkhi of first class brick, gur, belgiri sheera, gound, coloring pigment, stone for masonry work(0.10 to 0.15 x 0.10 to 0.15 x 0.10 to 0.15), plastic bucket 20ltr, plastic mortar pan, plastic mug 1 ltr, coir brush, tarpaulin sheet 18ft x 25ft, plastic pipe 25mm dia 30m length, water tank 1000 ltr, complete.

State Government

CTN :45410555

12 Jun, 2026 NA

Sundernagar - Himachal Pradesh

Tender For supply of fine aggregate (v2) conforming to is 383 (q3) , coarse aggregate (v2) conforming to is 383 (q3)

State Government

CTN :45403999

22 Jun, 2026 NA

Chatarpur - Madhya Pradesh

Tender For building material-doors (wooden membrane door): 1. made of pinewood and finished with wood paint. 2. isi certified. 3. minimum door thickness: 30 mm. doors (wpc – wood plastic composite) solid: 1. made of wpc material. 2. isi certified. 3. door thickness: up to 30 mm. 4. density: 50. wooden door frames – sal wood (sawn timber). aluminum section complete door/window (isi marked): rounded profile, 20-22 gauge, 4 mm thickness. 1. sliding window with aluminum frame and pebbled glass, complete with stainless steel mesh. 2. bearings and locks made of aluminum. 3. frame in silver finish. 4. rubber gasket: 4 mm. iron gate/frame, iron board. insecticide – chlorpyrifos 20% ec. urea fertilizer. nails (3-inch). black japan bitumen paint. g.i. wire. topsoil. growth hormones. copper wire for electrical fittings (2.5 mm). copper wire for electrical fittings (1.5 mm). electrical wiring cables (10 amp, 16 amp, 20 amp, 25 amp, 32 amp); orient ceiling fans; iron grills for windows; painting materials; wall putty; white cement (for whitewashing); paints; emulsion; distemper; laminated flush doors (shutter thickness: 30 mm); ceramic glazed bathroom floor tiles (30x30 cm, isi-marked, thickness: 6–7 mm, with a premium quality certification/label on the packaging); vitrified floor tiles (60x60 cm, isi-marked, thickness: 9–10 mm, double-charged/layered, with a premium quality certification/label on the packaging); ceramic glazed bathroom wall tiles (30x45 cm, isi-marked, thickness: 6–7 mm, with a premium quality certification/label on the packaging); granite stone (thickness: 10–15 mm, premium quality); cow dung manure (2 years old, well-decomposed, with a moisture content of less than 15%, and free from pebbles, stones, and plastic); steel railings; kota stone (thickness: 15–20 mm). premium quality submersible pumps (cri) — 1 hp, 2 hp; cement (opc 43 grade, isi marked, weight: 50 kg); bricks (9" x 4" x 3") — fully kiln-fired and compliant with pwd sor standards; river sand — free from impurities such as soil, dust, gravel, or stones; crushed stone aggregate (10 mm, granite/black basalt); crushed stone aggregate (20 mm, granite/black basalt); crushed stone aggregate (40 mm, granite/black basalt); murrum (laterite gravel) & boulders — free from contamination by soil or black cotton soil; steel reinforcement bars (isi marked, thermo-mechanically treated/tmt) — 12 mm; steel reinforcement bars (isi marked, tmt) — 10 mm; steel reinforcement bars (isi marked, tmt) — 8 mm; steel reinforcement bars (isi marked, tmt) — 6 mm; binding wire; iron angles; paver blocks (60 mm) — colored and polished; profile sheets (corrugated/roofing tiles pattern); plastic profile sheets; g.i. (galvanized iron) profile sheets; stone dust.

State Government

CTN :45399319

22 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of building material and other - open bhatta brick (8x4x4), cement (isi mark) 53 grade, brand - ultratech , acc and jk, stone aggregate 40 mm, stone aggregate 20 mm, stone aggregate 10 mm, dust, narmada sand, tested steel (isi mark) 6 mm, tested steel (isi mark) 8 mm, tested steel (isi mark) 10 mm, tested steel (isi mark) 12 mm, tested steel (isi mark) 16 mm, copra, bolder stone, profile sheet 0.5 mm 1.20 mtr width 3 mtr length, muram, steel iron ms pipe 72x72mm, thickness 2-3mm, steel iron ms pipe 40x40mm, thickness 2-3mm, steel iron ms pipe 25x25mm, thickness 2-3mm, steel iron ms pipe 50x25mm, thickness 2-3mm, fertile soil, fresh cow dung (kachha gobar), pakaa gobar, wall ceramic tiles 12x18, floor vitrified tiles matt & glossy 24x24, floor & wall tiles vitrified matt & glossy 24x48, vitrified porch tiles rustic 16x16, thickness 20mm, green net heavy duty type-2 u v stabilized material, 75 % shed, poly bag is 15x25 cm in size, 100 micron (400 gauge), uv stabilized material, per kg minimum of 145 poly bags and a warranty of minimum usage for 2 years without tearing with exposure to sunlight and water., poly bag is 20x30 cm in size, 125 micron (500 gauge), uv stabilized material, per kg minimum of 70 poly bags and a warranty of minimum usage for 2 years without tearing with exposure to sunlight and water., ldpe sheet natural compound/black compound conforming size 10.25 m x 1.25 m, minimum 125 micron 500 guage, weight 3 kg 10 % per bed, paver block 60mm thick, c.c.paver block of m-35 grade, shape-zigzag/cube/milano/dumble, vermi compost lamination bag size 19"x32" (inch) per bag, gsm approx weight capacity 25 kg with office name printing, wall putti (brand- asian paints true care 40kg), white cement brand birla, primer interior brand asian, primer exterior brand asian, steel primer brand asian, wood primer brand asian, oil paint (wood) brand asian, oil paint (iron) brand asian, emulsion interior brand asian, emulsion exterior brand asian, distemper brand asian, tarpin oil, brush 4", brush 5", vinyl printing board -vinyl + 5mm forex with 1" ms pipe frame pasting and installation at nursery, q r code stickers -medicinal plant, ret plants, ficus plants, water proof sticker of size 8"x12" having plants details with qr code, display board -approx size 2x8 (feet) with iron frame, acp base and disigned printed on vinyl fixing at signed, green house specification given in tender document page no 3 to 5rate per unit without gst, poly house specification given in tender document page no 5 to 7rate per unit without gst, rcc polercc fencing poles height 2.0 mtype straight, length 2.00 m, dimensions bottom 10x10 cm square, top 8x8 cm square cement concrete mix cement, sand and metal ration 1:2:4, with 12.5 nominal size coarse aggregate, sand used should be free from clay and salt. concrete mix shall be conforming to grade m-15 of is:456:2000reinforcement- 4 round vertical bars of 6 mm diameter, 11 no of stirrups of 6 mm diameter round ms bars 20 cm centre to centre.hooks 5 no. bottom hook should be provided 60 cm above the bottom of the pole, second at 82.5 cm, third hook at 112.5 cm, fourth hook at 150 cm, top and fifth hook at 195 cm from bottom.manufacturing- in order to ensure desired compressive strength, rcc fencing poles should be compacted with the help of platform vibrators. surface should be uniform and free from voids. the concrete cover over the reinforcement should not be less than 1.5 cm., barbed wiregalvanized steel barbed wire- mesh wire -galvanised steel wire of 2.5 mm diameterpoint wire galvanised steel wire of 2.5mm diameterbarbs sistance between two boards 75mm, the barbs shall have four points and shall be formed by twisting two point wires each two turns. tightly around both the line wires making altogether four complete turns.standard - conforming to is-278-2009, chainlink chainlink fencegalvanised steel chain link fence- mesh wire -galvanised steel wire of 3.15 mm diameter fabric size - 100x100 mm

State Government

CTN :45413501

09 Jun, 2026 NA

Mandi - Himachal Pradesh

Tender For lifting, collection and safe disposal of silt, mud, waste materials, and aggregate from the trail race tunnel plug area of 3x42 mw larji power house under the resident engineer, larji power house division hpsebl thalout.

State Government

CTN :45397974

11 Jun, 2026 80.77 Lacs

Kota - Rajasthan

Tender For work of name :- remaining work pkg. no. rj-23-10/srf (rr) / np / 2022-23 distt kota - providing, laying and spreading and compacting specified graded crushed stone in sub-base course including premixing the material at omc in mechanical mixer (pug mill), carriage of mixed material, laying in uniform layers with motor grader, f.e. loader, on a prepared surface and compacting with vibratory compactor to achieve the desired density including all material, labour, machinery, lighting barricading and maintenance of driversion complete. (morth specification clause 401). with all lead & lift, fdkuiqjk rfd;k ls punzsly, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc ordinary kilometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc hectometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and erecting typical citizens information board as per approved drawing & specification of mord, made of two ms sheet of 1.6 mm thick each of size 900 mm 750 mm stiffened by angle iron 25 mm 25 mm 3 mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 swg sheet (vertical post 3050 m with angle holdfasts and horizontal member 900 mm) to be joined by 5 mm thick ms plate at 12 places (65 50 mm) duly embedded in cement concrete m-15 grade of block of 600 mm 600 mm 750 mm size below ground level as per enclosed drawings & as directed by engineering - in-charge. all ms will be stove enameled on both side, lettering, figuring and border will be with ready mixed synthetic enamel paint of superior quality in required shade and colour etc. complete in all respect. all sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per mord specification., fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and laying reinforced cement concrete pipes np-3 for culverts including jointing ends and fixing collar with cement mortar 1:2. (morth specification : clause 1000/2900). 300 mm dia, fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, dry lean cement concrete sub - base. construction of dry lean cement concrete 1:3:6 sub-base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blening to be as per table 600-1, cement content not to be less than 200 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonne vibratory roller, finishing and curing., fdkuiqjk rfd;k ls punzsly, total, providing and laying un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base with 43 grade cement, coarse and fine aggregate conforming to is:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or fix form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures and vacuum processing pump as approved, curing compound, finishing to lines and grades as per drawing as per morth specification : clause no. 602, 112. using cement concrete m-30 pavement grade, fdkuiqjk rfd;k ls punzsly, total, earthwork in excavation for foundation of structure complete with all lift, dewaterin

Central Government/Public Sector

CTN :45406970

23 Jun, 2026 NA

Jaduguda - Jharkhand

Tender For supply of coarse aggregate: size range from 100 mm to 150 mm or 4" to 6" .

Central Government/Public Sector

CTN :45403802

24 Jun, 2026 30.00 Lacs

Jammu - Jammu And Kashmir

Tender For repair/maintenance of e/m installation, chain link fencing, stone aggregate and other connected items at zone i and zone ii under ge nagrota

State Government

CTN :45421247

15 Jun, 2026 NA

Tiruvallur - Tamil Nadu

Tender For supply of 40 mm aggregate

corporations/Associations/Others

CTN :45246691

11 Jun, 2026 NA

Panaji - Goa

Tender For corrigendum : preferential purchase scheme-vib-rcc slabs - supplying of factory made precast rcc slabs at site in concrete grade of m-25 with 20mm nominal size granite or basaltic aggregate, consolidated by means of mechanical platform, vibrator etc. with lifting hooks of m.s. 10 mm bars and pvc cups including cost of reinforcement etc., complete, a. size 900x400x150mm with steel reinforcement not less than 7 kg per unit 30t capacity, b. size 900x400x100mm with steel reinforcement not less than 5.0 kgs per unit 12t capacity, c. size 750x400x100mm withsteel reinforcement not less than 4.2 kg per unit, d. size 700x500x75mm with steel reinforcement not less than 3.0 kg per unit, e. size 600x500x75mm with steel reinforcement not less than 3.0 kg per unit, f. precast rcc slabs of size 1200x400x100mm with steel reinforcement not less than 7 kg per unit-12 t capacity., g. precast rcc slabs of size 1200x400x150mm with steel reinforcement not less than 10 kg per unit-30 t capacity., h. precast rcc slabs of size 1500x400x150mm with steel reinforcement not less than 12 kg per unit-30 t capacity. - supplying of factory made precast rcc slabs at site in concrete grade of m-25 with 20mm nominal size granite or basaltic aggregate, consolidated by means of mechanical platform, vibrator etc. with lifting hooks of m.s. 10 mm bars and pvc cups including cost of reinforcement etc., complete, a. size 900x400x150mm with steel reinforcement not less than 7 kg per unit 30t capacity, b. size 900x400x100mm with steel reinforcement not less than 5.0 kgs per unit 12t capacity, c. size 750x400x100mm withsteel reinforcement not less than 4.2 kg per unit, d. size 700x500x75mm with steel reinforcement not less than 3.0 kg per unit, e. size 600x500x75mm with steel reinforcement not less than 3.0 kg per unit, f. precast rcc slabs of size 1200x400x100mm with steel reinforcement not less than 7 kg per unit-12 t capacity., g. precast rcc slabs of size 1200x400x150mm with steel reinforcement not less than 10 kg per unit-30 t capacity., h. precast rcc slabs of size 1500x400x150mm with steel reinforcement not less than 12 kg per unit-30 t capacity.

Clay Powder Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors