Latest clay Tenders | Government clay Tenders

State Government

CTN :45732633

02 Jul, 2026 49.8 Thousand

Pinjore - Haryana

Tender For bhoj dharti,bhoj darara,bhoj mataur, group of 3 no. of habitations annual mtc.works for water supply - providing and laying of base course of floors, providing and laying of conglomerate floor, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering, brick work with common burnt clay non-modular bricks of class. cement plaster on rough side of single or half brick wall.

State Government

CTN :45732647

02 Jul, 2026 49.6 Thousand

Pinjore - Haryana

Tender For bhoj dharti,bhoj darara,bhoj mataur, group of 3 no. of habitations annual mtc.works for water supply - demolishing dry brick pitching in floors, drains etc, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering, steel reinforcement for r.c.c. work, brick work with common burnt clay modular bricks of class. cement plaster.

State Government

CTN :45720713

15 Jul, 2026 2.50 Lacs

Satna - Madhya Pradesh

Tender For supply of materials for carpentry industry (volume 01) - paper tape (branded/high quality) (as per sample), welding rod (branded/high quality) (gauge 8, gauge 10), nails – gauge 14, 17, 20 (branded/high quality) (1 to 4 inches), yellow clay, chalk clay (branded/high quality) (1 kg pack), plastic cane (for chair making) (branded/high quality) (as per sample), chandras (good variety/high quality), nc thinner (branded/high quality) (5-liter can), sandpaper, 4-inch (branded/high quality) (grade 80/100), turpentine oil (branded/high quality) (1 kg packet), paint (all colors) (branded/high quality) (1-liter pack), water-based paint (all colors) (branded/high quality), oil-based paint (all colors) (branded/high quality), brush (sizes 0 to 12) (branded/high quality), brush (branded/high quality) (4-inch), handsaw (16-inch) (branded/high quality), triangular file (4-inch) (branded/high quality), plywood 12 mm (branded/high quality) 4x8, plywood 18 mm (branded/high quality) 4x8, plywood 8 mm (branded/high quality) 4x8, plywood 6 mm (branded/high quality) 4x8, sunmica (1 mm) (branded/high quality) 4x8, sunmica (0.8 mm) (branded/high quality) 4x8, iron angle/iron strip (branded/high quality) – as per size, metal cutting blade (branded/high quality) 14-inch, metal cutting blade (branded/high quality) 4-inch, nuts, bolts, and washers – all sizes (branded/high quality) (as per sample), foam 3", 32 density (3x6) (branded/high quality), foam 2", 32 density (3x6) (branded/high quality), foam 1", 32 density (3x6) (branded/high quality), sofa fabric/rexine (branded/high quality), grinder disc/stone (no. 120, 140) (branded/high quality), putty (1 kg pack), wood cutter circular blade (branded/high quality) 10-inch, gi wire (branded/high quality), broom sticks (30-inch) (good/high quality) solution (sr 505) (branded/high quality) (1 kg packet), welding goggles (black/clear) (branded/high quality), measuring tape (branded/high quality), drill bit (good quality/high quality), wooden block (good quality/high quality), teak wood (good quality/high quality), acacia (babool) wood (good quality/high quality), sheesham wood (good quality/high quality), firewood (good quality/high quality), sealer (1 kg packing), wood touch-up/filler (1 kg packing), sandpaper (grit 120, 100) (good quality/high quality), electric planer (size-specific) (branded/high quality), straight edge/siknja (3 feet) (branded/high quality), bench vice (large size) (branded/high quality), hand drill machine (600 watt) (branded/high quality), compressor gun (500g, 200g) (branded/high quality), compressor hose/pipe (branded/high quality), planer machine moulding die (all sizes) (branded company / best quality)

State Government

CTN :45720726

15 Jul, 2026 3.50 Lacs

Satna - Madhya Pradesh

Tender For materials for the sewing industry (section 02) - paper tape , welding rod , nails (nos. 14, 17, 20) , yellow clay, chalk clay , plastic cane (for chair weaving) , chandras (shellac resin) , nc thinner , sandpaper (4-inch) , turpentine oil , paint (all colors) , water-based paint (all colors) , oil-based paint (all colors) , brush , brush , saw , triangular file , plywood (12 mm) , plywood (18 mm) , plywood (8 mm) , plywood (6 mm) , sunmica (1 mm) , sunmica (0.8 mm) , iron angle, iron strip , metal cutting blade , metal cutting blades , nuts, bolts, and washers (all sizes) , foam (3-inch, 32-density) , foam (2-inch, 32-density) , foam (1-inch, 32-density) , sofa fabric/rexine , grinding wheel , putty , brush cutter (circular blade) , gi wire , broom sticks , adhesive (sr 505) , welding goggles (black/clear) , measuring tape , drill bit , wooden block/batten , teak wood , acacia wood , sheesham wood , firewood , sealer , wood touch-up/finish , sandpaper , electric planer , c-clamp , bench vise , hand drill machine , compressor gun , compressor hose , planer machine molding die , sewing machine oil , nylon shirt buttons , hand sewing needles , sewing machine needles (10 pieces per packet) , sewing machine treadle/pedal , tailor's chalk , thread reels , amela machine bobbin case , sewing machine needle plate , scissors (size 08, 10) , sharpening stone , sewing machine , overlock machine , embroidery threads , embroidery frame , macramé cord (cotton, polyester, nylon, jute) , poly master , tree rope , stapler pins , white paper (80 gsm) , laser paper (green, 80 gsm) , white paper (68 gsm) , white paper (68 gsm) , ruled paper (68 gsm; ream of 1000 sheets) , ruled paper (68 gsm) , white paper (57 gsm) , brown paper (80 gsm) , card sheet (165 gsm) , cardboard sheet (no. 32) , rin/surf excel laundry soap , coating , fevicol , winding thread , winding cloth , fount solution , brown tape , screen printing ink , decoter , german sponge , reducer , winding paper , synthesizer , yellow envelope paper , stapler gun , winding paper , colored paper (70 gsm) , annual contract section , picking wall fiber , pickers , ratchet catch (leaf set) , pressing cam lever lr-101 , wooden steel (no. 29) , wheel gear 14t (no. 62) , bevel gear , worm wheel stud , ratchet catch lever , buffer soldering bracket , buffer strap (leather) , stick cap , bearing , ratchet wheel , warp weaver , worm , parachute rope , fine belt , picking stick , tariff wheel , handloom pickers , fast dyes (for fabric) , powerloom steel reed , yarn 2/40s on cone (coloured/white) , yarn 6s on coloured cone , coloured wool , yarn 2/60s on cone (coloured/white) , jute fabric , yarn 6s on cone , handloom reed (no. 12) , warping machine brake belt (leather) , dari beater/comb (wooden) , emery strip , warp frame hook set , pick/bobbin filling rod (handloom) , cast iron welding rod , temple rod/cover , weft filling needle/hook

State Government

CTN :45430774

14 Jul, 2026 1.23 Lacs

Sheopur - Madhya Pradesh

Tender For corrigendum : sanitation suply for sub jail vijaypur - < sanitation items supply for sub jail vijaypur > - mustard oil (branded); lime (chuna/kalai); red ochre (geru); acid; salt; large clay pot with lid; small clay pot with lid; coconut broom; date palm broom; bamboo broom; *soofa* (cleaning brush); colgate tooth powder/paste; laundry soap (ghadi, wheel, surf excel); bathing soap (lux, lifebuoy, breeze, joy – 75g pack); washing powder (ghadi, wheel, surf excel); phenyl concentrate; toilet brush; whitewashing brush; plastic container/mug; tongue cleaner; coconut oil (branded company pack); asian paints oil paint; wood oil; blades (super-max, gillette).

Central Government/Public Sector

CTN :45716459

08 Jul, 2026 1.95 Lacs

South Andaman - Andaman And Nicobar Islands

Tender For supply of dry chemical powder , clip jubilee 3 and half to 4 1 by 8 , emery cloth abrasive cloth is grit 36 , cloth coated pvc 102 cm wide , paint roller 6 inch , paint brush 4 inch , paint brush 2 inch , gloves leather a , detergent solution , grease lg 280 , cleaner white toilet , paint roller 9 inch , ear plug , switch socket 3 pin 15a isi mark , rope polypropylene 16 mm isi mark , broom country , super mop , tape transparent 1 inch , sand paper isi mark , paint roller 7 , paper napkin , dvd , envelope cloth coated 12x16 inch , envelope cloth coated 10x14 inch , envelope cloth coated 9x12 inch , tape transparent 2 inch , tape insulating 25 mm , wonder tape 2 inch , wet surface putty , xerox paper 80 gsm 420 x 297 mm a3

Central Government/Public Sector

CTN :45719686

13 Jul, 2026 44.90 Lacs

Cachar - Assam

Tender For repair/ maint of lt ug cables and its connected items of masimpur mil stn incl army est at khumbigram under masimpur mil stn - e & m division items, dismantling of old unserviceable/damaged acsr or aac conductors of any size , jumper from overhead line & stacking serviceable & non serviceable material separately complete all as specified and directed., dismantling of old unserviceable/damaged stay assembly embedded in concrete including demolition of pcc and removing unserviceable meterials from site of work complete all as specified and directed., dismantling of cross-arms of ms channel or angle of any sections complete all as specified and directed., dismantling of insulators of any size/type complete all as specified and directed., dismantling earth wire or copper conductor/ cradles/stay /service feeder or distribution span complete all as specified and directed, excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cable/poles and getting out in soft/loose soil complete all as specified and directed., returning, filling in trenches with soil obtained from excavation including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed., removing excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point all all as specified and as directed., supply and laying burnt bricks of sub-class b of size 230mm x 115mm x 75mm laid in trenches for cable protection complete all as specified and as directed, supply and spread dry fine sand in trenches as sand cushioning to under ground cable for protection with fine river sand and provide reqd cover after punning down complete all as specified and directed. note: thickness of sand cushioning after punning down will be measured and paid separately., m&l for cutting existing road / pcc drain for taking out / laying of underground cable and including necessary earth work and making good to match with the existing surface with pcc 1:3:6 type ci using 20mm graded aggregates complete all as specified, taking down or out existing cable of sizes 10 sqmm to 70 sqmm 2/3.5/4 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, taking down or out existing cable of sizes 95 sqmm to 300 sqmm 3.5 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :-(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 10 to 70 sqmm 2/3.5/4 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc complete all as directed and specified. note :- lugs and glands will be measured and paid separately., relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 95 to 300 sqmm 3.5 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc compl

corporations/Associations/Others

CTN :45707328

03 Jul, 2026 NA

Ahmedabad - Gujarat

Tender For procurement of 17a1 dental consumable items - acrylic cold cure powder + liquid, acrylic fullteeth set, acrylic posteriro teeth set of 16, adhesive powder, air rotor hand piece spray, bott, alpine mounted stone for c.a hp/ st. hp, amalam capsules single use, anterior teeth set of 6 upper/lower, applicators tips brushes for bonding agent, arch wire- 032" round can wires ( straight, length), autoclave strip, barb broches n0.15-40, begg's buccal tubes weldable--- oval, beggs t-pins, blue inlay wax, bonding kit ( light cure ), bonding kit ( self cure ), brass lock - pins stege - 1, brass lock - pins stege - 3, brass wire, bristle brush for polishing, buccal tubes ( oval ), buff for polishing - bondable, buttons -rect-curved -1, calcium hydroxide with iodofoam, carbide bur cahp, carborundum disc, coe pack, combifin material set, composite finishing & polishing kit (abrasive, stris & discs), composite material, brown,white,black,yellow, composite placement instruments +, contouring instruments (teflon coated), core formers, dental floss, dental mercury, dental napkin, disposable sleeve cover for opg bite block, disposeble sucction tip, dowel pin, edta gel, elastic rubber rings indian, endo block, endo flass, expansion screw, expansion screw ( conventional ), expansion screw hyrax (size : 9 mm & 11 mm ), extra oral film - { size : 8"x10"} for kodak, system, flouride varnish, foamtray (flouride applicator) size- adult, formacresol, g.p.stick, gold alloy, gold castin wax, gutta percha cutter, hand protaper files, h-file, high hat pins -1, impression compound, investment materials, iodoform powder, iopa x-ray film for kodak system, light tranimiting wedges (010), liquid for electopolishing unit, low friction lig - ties, magic foam cord, mandril for sand paper, mandril for st.h.p., material for temporary gingival, miracle mix (silver reinforced gic), modeling wax, needle no 18 half circle, niti -file .02 taper ( 21mm) no. 15-40, niti -file .02 taper ( 25mm) no., 15-40, niti plugers no.15-40 assorted sizes, pediatric iopa x ray film{iopa size 0} for, kodak system, pesso reamers no.1 to 6, pretrimmed,precontoured,prefestoond s.s, crown, pumic powder, relining gel, relining material/soft reliner for acrylic, rotary protaper files, rotational wedges, rubber cup for ca hp, rubber dam sheets, sand for sandblasting unit, sand paper, sand paper sheets, scaler handpieces, scalertips, seprating medium, silver amalgam alloy, sodium hypocloride, steel valcanite trimmer, sticky wax, tooth preparation kit, topical fluoride gel (apf gel), universal polishing paste for denture, wax carving set, wires can beta - jit wires, zero degree molar teeth set of 16, preadusted edgewise 0.022 mbt kit, container complete no. 22 (plastic box), 8x10 dry view films 125 sht, non absorbable black braided silk surgical, suture on reel non sterile length 25/30 mtr, diametr 3-0, unolock syringe 2.5ml, rvg sleev for x ray(pktt-500), mercury (225gm), etchent jumbo syringed, occlusal film for x ray, fluride gel, fluride application tray, cool temp, metal alloy (white metal), prophylaxis paste, zinc oxide (100gm0, eugenol, 17% edta liquid, fiber splint, fogar solution, skyblue wax

Corporations And Associations And Others

CTN :45710725

02 Jul, 2026 5.99 Lacs

Delhi - Delhi

Tender For supply of materials for day to day maintenance work in area by providing coarse sand stone aggregate 10 mm, bricks and precast rcc drain covers at kalkaji store ward no.175 kalkaji cnz. - laying and jointing pvc pipe. heading, supply and stacking of coarse sand at mpl. store, supply and stacking of of size 10mm nominal stone agg. at mpl. store, supply of rcc slab/grating 70mm thick manufactured with cc 1:2:4 (cement : 2 coarse sand : 4 graded stone agg. 20mm nominal size) reinforced with 96 kg/m3 of rcc i/c lapping all four side with m.s. sheet 1.6 mm thick and fixing in position complete (drain cover with or without holes) at mpl. store, supply of precast r.c.c. cover frame 500x450 mm horizontal grating at mpl. store, supply and stacking of common burnt clay f.p.s bricks of class designation 75 at mpl. store

Corporations And Associations And Others

CTN :45563054

07 Jul, 2026 NA

Rupnagar - Punjab

Tender For corrigendum : e-tender for civil contract jobs - civil contract job:, earth filling under floors with surplus ordinary soil or soil containing gravel or kankar, including ramming, watering and consolidated lead., first class burnt brick work laid in cement sand mortar 1:7 in foundation and plinth, laying 80 mm thick factory made cement conc. inter locking paver bricks after m-40 grade made by block making machine with string vibratory compaction ordinary gray color & pattern over 50 mm thick compacted bed of coarse sand filling the joint with fine sand, complete in all respect ., dismantling brick of flagged stone flooring including concrete base, dismantling concrete plain 1:2:4 mix, cement concrete 1:2:4 with stone ballast or shingle, a. mixing by manual mean, b. mixing by mechanically mean using concrete mixer, laying of dry brick ballast 40mm gauge for flooring, civil work (rate to quoted on csr rates)

Clay Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors