Latest clean agent system repair Tenders | Government clean agent system repair Tenders

Central Government / Public Sector

CTN :40962436

25 Jul, 2025 24.61 Crore

Panipat - Haryana

Tender For custom bid for services - rprc256204-rate contract for rotary equipment maintenance in p-25 units at panipat refinery-1. personal protective equipment (total marks - 80), i). whether p.e.e. used as per the contract standard., ii). p.p.e. compliance at site (% marks will be deducted as per the violation of each worker), iii). during the working period, at least 20% additional ppe by the contractor stock has been kept., iv). p.p.e. given to the worker by the contractor is recorded in a ppe monitoring register. contractor shall, have a detailed register., 2. training (total marks - 50), i). tool box talk has been provided to the contract workers and record maintained., ii). arrangement of safety training for contract workers (induction fire and safety training / on the job safety, training), iii). does the contractor ensure that all the workers are skilled as per the job given?, iv). does the contractor ensure that all contract workers are supervised directly by the competent person., 3. incident / injury / incidence of hair loss (total marks - 70), i). incident of near miss reporting by contract workers (1 point for each 20 under-miss reported, maximum, 20 points)., ii). unsafe act / unsafe condition noticed against contractor / contract employee., iii). first aid / fire incident / injury (10 for every first aid / injury), iv). major accident / major fire (100 every accident), 4. work permit (total marks - 100), i). all works done with valid work permit and clearance., ii). work permit violation (2 every work permit violation), iii). during the work, standard operating procedure (sop) was followed., iv). whether the standard equipment is used by the contractor., 5. safety incentives and awareness (total marks - 100), i). did the contractor motivate his employees on the basis of safety performance? whether the contractor, held a safety meeting with his employees and engineer in charge., ii). whether the contractor has promoted safety on the site to make the contract employees aware about, safety., iii). whether the contractor appointed a safety supervisor., iv). did the contractor or its worker get any appreciation award from the iocl management?, v). whether all the contract employees have been medically examined and their documents have been, submitted to the engineer in charge., .

CTN :40955936

15 Jul, 2025 22.30 Lacs

Tonk - Rajasthan

Tender For municipality malpura vehicles jcb operator, safety tank driver, fire vehicle driver, fireman, computer worker supply work

Central Government/Public Sector

CTN :40937755

23 Jul, 2025 1.04 Crore

Kanpur - Uttar Pradesh

Tender For fire safety and bms work for data centre facility under nsm2 national super computing mission at computer centre iit kanpur

CTN :38504808

07 Jul, 2025 NA

Hyderabad-T - Telangana

Tender For bid to ras supply of emergency response equipment - taparia, stanley, spartan, tata agrico , vise grip 10 inches make taparia, stanley, spartan, tata agrico , bolt cutter 14 inches make taparia, stanley, spartan, tata agrico , bolt cutter 30 inches make taparia, stanley, spartan, tata agrico , chisel for concrete 1 by 2 inch make taparia, stanley, spartan, tata agrico , chisel for concrete 1 by 2 inch to 1 inch make taparia, stanley, spartan, tata agrico , framing square 22 inches make taparia, stanley, spartan, tata agrico , screw driver set make taparia, stanley, spartan, tata agrico , hacksaw 12 inch tubular make taparia, stanley, spartan, tata agrico , hacksaw replacement blades 12 inch long make taparia, stanley, spartan, tata agrico , tin snip 12 inch make taparia, stanley, spartan, tata agrico , claw hammer make taparia, stanley, spartan, tata agrico , sledge hammer 7kg. make taparia, stanley, spartan, tata agrico , sledge hammer 10 kg. make taparia, stanley, spartan, tata agrico , carpenter hammer 3 inches make taparia, stanley, spartan, tata agrico , level 12 inch make taparia, stanley, spartan, tata agrico , file flat 12 inches make taparia, stanley, spartan, tata agrico , carpenter pencil packets make apsara, natraj, navneet , paint bursh 3 by 4 inch make amber or equivalent , shovels round 8 inch make taparia, stanley, spartan, tata agrico , spade shovels 12inch x 10inch make taparia, stanley, spartan, tata agrico , spades make taparia, stanley, spartan, tata agrico , fire axe 2.5 feet make taparia, stanley, spartan, tata agrico , crow bar 2 feet make taparia, stanley, spartan, tata agrico , crow bar 3 feet make taparia, stanley, spartan, tata agrico , pick mattock 3kg make taparia, stanley, spartan, tata agrico , pry bar 6 feet make taparia, stanley, spartan, tata agrico , ventilator and air tube 7 meters long , extension cord 8mm dia 25meters long , working lamps with 50m lead , fuel containers 20 liters , reflective jackets water proof make 3m, udyogi, karam, champion, sure safety , safety helmets make 3m, udyogi, karam, champion, sure safety , boots, hard toe steel shank make 3m, udyogi, karam, champion, sure safety , tarpaulin 4m x 4m , tarpaulin 6m x 6m , mega phone battery operated load speakers make ahuja or equivalent , rope manila 100m rolls , rope nylon 100m rolls , traffic cones make 3m, udyogi, karam, champion, sure safety , wooden planks 5m x 100mm x 100mm , wooden planks 3m x 100mm x 50mm , safety vest fluorescent make 3m, udyogi, karam, champion, sure safety , heavy duty work gloves make 3m, udyogi, karam, champion, sure safety, venus , face shield make 3m, udyogi, karam, champion, sure safety, venus , safety goggles make 3m, udyogi, karam, champion, sure safety, venus , head light pelican heads up 2780 or equivalent , nose mask make 3m make 3m, udyogi, karam, champion, sure safety, venus , dust mask make 3m, udyogi, karam, champion, sure safety, venus

CTN :40818010

07 Jul, 2025 8.47 Lacs

Rewa - Madhya Pradesh

Tender For supply work of fire fighting equipments at municipal corporation rewa for financial year 2025-26. - abe fire extinguisher 12 kg (map 50), abe fire extinguisher refilling (map 50) refilling, abe fire extinguisher 4kg (map 50), abe fire extinguisher 6kg (map 50), adjustable wrenches 27no., adjustable wrenches all type (upto 27 no.), angle cutter (heavy duty) (11000 rpm), axe large (heavy duty), b.a. set refilling, bolt cutter 350 mm, bolt cutter 600 mm long(heavy duty), canvas gloves with anti skid palm (heavy duty), cap hydrant spindle (heavy duty), co2 fire extinguisher refilling, co2 fire extinguisher 6kg, co2 fire extinguisher 9kg, combi tools hydraulic (spreading force 23 ton, cutting force 43 ton), combined key for hydrant cover and lower valve, delivery hose 63mm dia confirming to (type a 15 mtr length) with ss metal and female coupling, delivery hose 63mm dia confirming to (type a 30 mtr length) with ss metal and female coupling, delivery hose 63mm dia confirming to (type b 15mtr length) with ss metal and female coupling, delivery hose 63mm dia confirming to (type b 30mtr length) with ss metal and female coupling, digging bar(heavy duty) 5kg, double side box end wrench ss (12-13, 14-15, 16-17, 23-26, 24-27) complete set, electric chain saw machine (heavy duty) 16 inch bar,800w, electric circular saw 1400 watt, electric tool kit (megnetic bit holder, long nose plier, vu inch adapter pller 1x4, socket wrench, cutter hammer, wood drill bits x5, masonry drills bitsx5 wrenchx7 allen keysx8 hix bitsx10, fire beater ms 5kg, fire blanket 5mtrx5mtx4mm (heavy duty) asbestos, 900 degree c, fire proximity suit with helmet, fire fighter cap (heavy duty), fire fighter winter jacket (heavy duty), fire fighter uniform, fire fighting safety shose/boots (heavy duty) class s-3, fire net (3m x 10m) (heavy duty), fire safety helmet with tourch facility(heavy duty), fire vehicle ladder 24 feet (aluminium), fire vehicle ladder 30 feet (aluminium), fireman axe (heavy duty), first aid box, floodlight led work light 18 v, foam branch-fb5x type with pick up tube, gm, foam tubes (length 14 inch), fog nozzle 63 mm. gunmetal, folding ladder aluminium 15 feet (heavy duty), full face mask, goggle- (heavy duty), hand controlled branchpipe gm 63mm, hand cross saw 18 inch steel (heavy duty), high expansion foam branch pipe 63mm gm, high expansion foam compound, high velocity nozzle 63 mm gunmetal, hook ceiling (preventor) with 3 mtr long wooden handle(heavy duty), hose bandages, hose reel 19mm heavy duty (30 m), hose reel drum ms, hose reel nozzles bronze inch, hydraulic bolt cutter electric 950 w cutting diameter 20mm, hydraulic grease gun with all nozzle set 9gm/stroke, 10 kg. heavy duty, 4000 psi, hydraulic rebar cutter (14 ton) (manual), leather gloves(heavy duty), led torch rechargeable 4 hour backup 2200 mah, london pattern nozzle 63 mm, gunmetal, mechanical foam fire extinguisher refilling, mechanical foam fire extinguishers 2ltr, mechanical foam fire extinguishers 6ltr, monitor complete set (ms), navy type branchpipe gunmetal 63mm, petrol chain saw machine(heavy duty) (1900 watt) (chain speed 12 m/second ) (1100rpm), pick axe (heavy duty), pick axe (heavy duty), pipe wrench steel (2, 3,4,5 inch) (heavy duty) complete set, portable gas detector, portable generator 2kva with self facility, portable microphone and speaker for announcement, raincoat (heavy duty), revolving type branchpipe gunmetal 63mm, rope ladder (heavy duty) (per meter), rope polyamide 12mm dia for guy line of 30mtr long with sealed ends, rope polyamide 22mm dia for short line of 20mtr long with sealed ends, rope polyamide 24mm dia for long line of 30 mtr long with sealed ends, rotary hammer (1500w), rubber gloves (heavy duty), scba for long duration operation (45 min.), sand bucket with stand (6 no.), screw drivers all type 1 set, short branch 63mm, shortbranchpipe gunmetal 63mm, shovel with handle (heavy duty), single and bi-filter half mask, three position branchpipe gm 63mm, tr

State Government

CTN :40839181

08 Jul, 2025 24.75 Lacs

Tapi - Gujarat

Tender For fire safety equipment work of taluka court building at.nizar, di.tapi (supplying and installation of fire hydrant,pump, alarm system)

State Government

CTN :40833227

02 Jul, 2025 14.19 Lacs

Chengannur - Kerala

Tender For general-installation of fire safety equipments in court complex ,chengannur-additional requirements-court complex-chengannur-general civil work

CTN :40808350

04 Jul, 2025 13.22 Lacs

Ganganagar - Rajasthan

Tender For requirement of safety, rescue & security items for ssctps fy 2025-26,suratgarh - head up light with alkaline batteries with adjustable cloth stripper for head and rubber strap , gum boots with steel toe cap moulded pvc to protect against oil acid and alkalie resistance confirming to is 15298 part - ii (size-8/9/10 inch) , barrication tape (6 inch) 250 mtr roll made out of pe/pp film with work in progress printed on both sides as per ansi z53 5.5 , chemical goggles with indirect ventilation made of pvc frame and fitted with polycarbonate lengths and non allergic elestic band confirming to en 160 , acid/ alkali proof gloves having size of 18 inch with palm m , normal dangari (size-l) with having an is-11612 are made of various fabrics like treated cotton , fire proof dangari (size-l) having is-11612 are made of inherent fire retardent fabrics , safety helmet made up of thermoplastic polymer with inside eight point textle/nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- white , safety helmet made up of thermoplastic polymer with inside eight point textle/ nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- green , impregnated granular activated carbon multi gas filter cartridge having is- 15323 :2003 , foot operated eye and face washer combination units are made of powder coated anti corossive gi pipes as per is 10592 , carry sheet (stretcher) l x b: 212 x 75 cm with self weight 1 kg, load limit 159 kg, lift type: horizontal , wind indicator made of light weight pu coated nylon material. double stitch at all joints. , plastic eyelets gives anticorrosion proper-ties. the complete wind sock comes with a polymer packing. 2" dia and 6 ft length along with wind indicator stand is made of good quality non corrosive galvanized iron (gi) pipe. , ear plugs corded epsav-570 , nose/ dust mask rpsav-p2 , flash light distance 243 mtr. run time:2 hr. 15 min. compliance: none, lumens. 164 , vapour respirator with head stripes to accommodate twin cartridges with exhalation valve , safety net consisting of pp rope dia: 4mm, mesh size: 100 mm, outer rope dia: 12mm supported by an additional nylon net (fish net), rope breaking strenght report should be as per is size 5mtr x 10 mtr , ear muffs, ce marked, made from impact proof polypropylene with multi position soft polymer head band. foldable compact size for storage. approved from en 352-2, snr 27 db(a) , heat shield hand gloves made of normal and tannedsplit leather of reddish-brown colour. , insulating thermalbarrier as inner layer gives heat protection upto 250 degrees. thumb re-inforcement enhances usage life. best for weldingtand general heat applications size 10 length 12.5", approved from en407-423x4x, en388-4344 , insulated hand gloves with working voltage of 17000 volts and proof voltage 25000 volts length of 14 inch, confirm to erda 4770:1991 , electrical hand gloves, for 2000 volts dc, coating material natural rubber latex, liner material non flocked, cuff style rolled beaded/gauntlet, grip design smeeth finish, confirm to erda 4770:1991 , hot oil splash suit, a five layer garment made of csm material, meta aramid, inherent cotton, aramid felt & inherent fr. the fabric withstanding pressure caacity is 50kg/cm2 and steam strength is up to 350c temperature.it should be atira tested for 250c splash, tested to iso 5025,9151,6942,9185 and en 1875-3 , chemical splash goggles with indirect ventilation, protect against splash and a hard-coated polycarbonate lens that reduces uvb and uva radiation from natural sunlight by 99%, approved from ansi z.87.1.2003 , chemical handling gloves, protect from acid alkali, sulfuric acid, size 18" as per en 374:2003 , elecrical shock proof helmet, material should be hdpe, weight should not be more than 325 gms design should be aerodynamic size is 520 to 600 mm, confirm to is 2925:1984 for head protection 30 kv , chemiflex latex gloves, length-300 mm, en si

CTN :40808819

23 Jul, 2025 NA

Multi City - Multi State

Tender For civil work for provision of concealed wiring with accessories at different administrative building and central hospital to implement fire safety recommendation and augmentation power supply arrangement at substation no 6 and 8 at south eastern railway, garden reach.

CTN :40821460

08 Jul, 2025 NA

Multi City - Rajasthan

Tender For requirement of safety, rescue and security items for ssctps fy 2025-26, suratgarh - head up light with alkaline batteries with adjustable cloth stripper for head and rubber strap, gum boots with steel toe cap moulded pvc to protect against oil acid and alkalie resistance confirming to is 15298 part - ii (size-8/9/10 inch), barrication tape (6 inch) 250 mtr roll made out of pe/pp film with work in progress printed on both sides as per ansi z53 5.5, chemical goggles with indirect ventilation made of pvc frame and fitted with polycarbonate lengths and non allergic elestic band confirming to en 160, acid/ alkali proof gloves having size of 18 inch with palm m, normal dangari (size-l) with having an is-11612 are made of various fabrics like treated cotton, fire proof dangari (size-l) having is-11612 are made of inherent fire retardent fabrics, safety helmet made up of thermoplastic polymer with inside eight point textle/nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- white, safety helmet made up of thermoplastic polymer with inside eight point textle/ nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- green, impregnated granular activated carbon multi gas filter cartridge having is- 15323 :2003, foot operated eye and face washer combination units are made of powder coated anti corossive gi pipes as per is 10592, carry sheet ( stretcher)l x b: 212 x 75 cm with self weight 1 kg , load limit 159 kg , lift type: horizontal, wind indicator made of light weight pu coated nylon material. double stitch at all joints. plastic eyelets gives anticorrosion proper ties. the complete wind sock comes with a polymer packing. 2 dia and 6 ft length along with wind indicator stand is made of good quality non corrosive galvanized iron (gi) pipe., ear plugs corded epsav-570, nose/ dust mask rpsav -p2, flash light distance 243 mtr. run time:2 hr. 15 min. compliance: none, lumens. 164, vapour respirator with head stripes to accommodate twin cartridges with exhalation valve, safety net consisting of pp rope dia: 4mm, mesh size: 100 mm,outer rope dia: 12mm supported by an additional nylon net (fish net), rope breaking strenght report should be as per is size 5mtr x 10 mtr, ear muffs, ce marked, made from impact proof polypropylene with multi position soft polymer head band. foldable compact size for storage. approved from en 352-2, snr 27 db(a), heat shield hand gloves made of normal and tannedsplit leather of reddish brown colour. insulating thermalbarrier as inner layer gives heat protection upto 250 degrees.thumb re inforcement enhances usage life. best for weldingtand general heat applications size 10 length 12.5", approved from en407-423x4x, en388-4344, insulated hand gloves with working voltage of 17000 volts and proof voltage 25000 volts length of 14 inch, confirm to erda 4770:1991, electrical hand gloves, for 2000 volts dc, coating material natural rubber latex, liner material non flocked, cuff style rolled beaded/gauntlet, grip design smeeth finish, confirm to erda 4770:1991, hot oil splash suit, a five layer garment made of csm material, meta aramid, inherent cotton, aramid felt & inherent fr. the fabric withstanding pressure caacity is 50kg/cm2 and steam strength is up to 350 c temperature.it should be atira tested for 250 c splash, tested to iso 5025,9151,6942,9185 and en 1875-3, chemical splash goggles with indirect ventilation, protect against splash and a hard coated polycarbonate lens that reduces uvb and uva radiation from natural sunlight by 99%, approved from ansi z.87.1.2003, chemical handling gloves, protect from acid alkali, sulfuric acid, size 18" as per en 374:2003, elecrical shock proof helmet, material should be hdpe, weight should not be more than 325 gms design should be aerodynamic size is 520 to 600 mm, confirm to is 2925:1984 for head protection 30 kv, chemiflex latex gloves, length-300 mm, en size- l coating material- natur

Clean Agent System Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

State Government

State Government