Latest cleats Tenders | Government cleats Tenders

Central Government/Public Sector

CTN :45011585

22 May, 2026 NA

Multi City - Multi State

Tender For supply of set of stainless steel fasteners. set consists of 2 sets of items as given below: 1) m10 x 40mm, ss304 fully threaded bolt-01 no, nut -01 no, spring washer-01 no and flat washer-2 nos of grade a2-70 to is 1364 (all stainless steel)-600 nos/set. 2) m12 x 50mm, ss304 fully threaded bolt-1 no, nut -01 no, spring washer-1 no and flat washer-2 nos, of grade a2-70 to is 1364 (all stainless steel)-100 nos/set [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45012581

26 May, 2026 NA

Multi City - Multi State

Tender For set of fasteners in various sizes fully threaded hex head bolt with suitable spring washer, plain washer & nut. detailed description as per annexure attached. note :- each of one set sample to be got approved before bulk supply. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :44539764

11 May, 2026 NA

Tapi - Gujarat

Tender For corrigendum : supply of various fasteners and consumables for chp at utps. (chp maint. (mech) et-6238) - ms hex bolt nut size m 6x50 full thread, ms hex bolt nut size m 8x50 ft, ms hex bolt nut size m 10x40 ft, ms hex bolt nut size m 10x60, ms hex bolt nut m 12x60 (ft), hexagonal head, full thread m. s. bolt with nut of size m 12 x 80 mm, ms hex bolt nut size m 16x90 full thread (f.t.), ms hex bolt nut size m 16x120 ht, ms hex bolt nut m 18x100, ms hex bolt nut m 20x80., ms hex bolt nut m 22x100, ms bolt m 24x100, unbreko make ms nut bolt ( full thread) with double washer size: m30 x 120 mm, s.s.-316 hexagonal full threaded bolt with nut and two nos. washers size: m 10 x 50, hexagonal headed full threaded stainless steel aisi-316 bolts with nuts and two washers.size m 10 x 80 mm long., s.s.-316 hexagonal full threaded bolt with nut and two nos. washers size: m 12 x 50, ss316 fastner hexa head boll with nut(ft)m12x70, ss316 bolt with nut and two washer m16x60, ss 316 full thread bolt nut with washer m 16x100 (one set consists of 01 no bolt , 01 no washer), high tensile hex bolt nut m 10x50 gr.12.9, unbrako make hexagonal bolt, nut & spring washer size m10 x 80 full threaded of grade 10.9, unbrako h.t.hex.bolt nut & spring washer size m.12 x 50 mm., unbreko make ht hex. bolt of m16x50mm with nuts and washer as per is 1364 din 933 and threads as per metric is-4218 bolt 10.9 grade, nut and washer 10.9 grade and having std pitch and thread length i.e. full thread., unbreko make allen bolt size m16x100 grade 12.9, ht hex bolt m 16x130, ms hex bolt nut size m 6x50 full thread, ht nut&bolt with washer carbonsteel size:m16x150, ht hex head bolt nut, m 20x70, ms hex bolt nut size m 8x50 ft, high tensile hexagonal head bolt of size m20 x 120, ht hex bolt nut and washer size m 22x70, ms hex bolt nut size m 10x40 ft, 8.8 grade high tensile bolts with nut and spring washer of size m 22 x 150, ms hex bolt nut size m 10x60, ht hex bolt nut m24x90, high tensile hex head bolt size m 24x120 long mechanical properties as per class 10.9 ., ms hex bolt nut m 12x60 (ft), unbrako make stud bolt with two heavy hex nut m16x60 mm (astm a 193 gr.b7 & a 194 gr.2h), hexagonal head, full thread m. s. bolt with nut of size m 12 x 80 mm, m22x160 l full thread ht stud with two spring washers and two nuts, m.o.c : studs to astm a193 gr.b7 and nuts to astm a194 gr.2h., ms hex bolt nut size m 16x90 full thread (f.t.), m24 x 160 ht grade 8.8, a set of stud with nut and lock washer washer., unbreko make stud bolts size: m30 x 170 mm, ms hex bolt nut size m 16x120 ht, ht allen bolt m 6x 50, unbreko make allen key bolt size: m08 x 50 mm, ms hex bolt nut m 18x100, allen key bolt m 10x50, ms hex bolt nut m 20x80., unbreko make allen key bolt size: m10 x 100 mm, ms hex bolt nut m 22x100, unbreko make allen bolt size m12x60 grade 12.9, ms bolt m 24x100, unbreko make allen head bolt m12x80, allen key bolt size m 16x40, unbreko make ms nut bolt ( full thread) with double washer size: m30 x 120 mm, unbrako alenkey full thread bolt : m . 16 x 50, s.s.-316 hexagonal full threaded bolt with nut and two nos. washers size: m 10 x 50, unbreko make allen bolt size: m16 x 70 mm, hexagonal headed full threaded stainless steel aisi-316 bolts with nuts and two washers.size m 10 x 80 mm long., h.t. allen bolt size of m 20x60 grade12.6, s.s.-316 hexagonal full threaded bolt with nut and two nos. washers size: m 12 x 50, high tensile allen bolt m 24x70 gr.12.9, high grade alloy steel grub screw size m5 x 10 full thread mtl alloy steel 45 h conf to is 6094, ss316 fastner hexa head boll with nut(ft)m12x70, grub screw m 6x16, ss316 bolt with nut and two washer m16x60, unbrako make grub screw of size m6 having length of 20 mm., ss 316 full thread bolt nut with washer m 16x100 (one set consists of 01 no bolt , 01 no washer), high tensile hex bolt nut m 10x50 gr.12.9, unbrako make hexagonal bolt, nut & spring washer size m10 x 80 full threaded of grade 10.9, unbrako h.t.hex

Central Government And Public Sector

CTN :44760622

01 May, 2026 3.17 Lacs

Darjeeling - West Bengal

Tender For corrigendum : installation of obstacle training equipment at cisf unit tld iv ps - earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m. as directed. the item includes necessary trimming the sides of trenches, levelling, dressingand ramming the bottom, bailing out water as required complete.(a) depth of excavation not exceeding 1,500 mm, earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m. as directed. the item includes necessary trimming the sides of trenches, levelling, dressingand ramming the bottom, bailing out water as required complete (b) depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring., cement concrete with graded jhama khoa (30 mm size) excluding shuttering in ground floor and foundation- 1:3:6 proportion, ordinary cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground flooras per relevant is codes(b) river bazree, m.s. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle,channel sections conforming to is: 226, is: 808 & sp (6)- 1964 connected to one another with bracket,gussets, cleats as per design, direction of engineerincharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding electrodes of approved make and brand conforming to is:814- 2004, haulage, hoisting and erection all complete. the rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc.i) for structural members of specified sections weighing less than 22.5 kg./m, (a) priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc, (a) painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary (b) on steel or other metal surface :with other than higloss of approved quality-(iv) two coats (with any shade except white), filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)(b) do - by fine sand, supply and fixing of manila rope/ monkey rope., reinforcement for reinforced concrete work in all sorts of structures including distribution bars ,stirrups, binders etc. initial straightening and removal of loose rust ( if necessary), cutting to requisite length hooking and bending to correctshape, placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction.(a) for works in foundation,basement and upto roof of ground floor/upto 4m) (i)tor steel/mild steel iii. others manufacturers not specified

State Government

CTN :44231927

04 May, 2026 NA

Jamnagar - Gujarat

Tender For corrigendum : supply of various size of ms/hightensile/ss fasteners for bmd unit 3 and 4 at stps - high tensile socket head cap screw (allen bolt ) of size m12 x 35mm full threaded of grade 10.9, hex socket head cap screw, is 2269, m16x90, gr 12.9, ht hex bolt nut m 24x80,gr.8.8, m33 x 165 full thread,high tensile alloy steel hex.head bolt property class 10.9., hexagonal socket head cap screw m10x30 gr-10.9 for coal mill of unit 3 and 4 of sikka tps., ht allen bolt m 10x50,gr.12.9, unbreko make allen head bolt m12x80, unbrako/tvs/gkw/pfl high tensile alloy steel hex.head bolt size m16 x 50mm (ft) property class 10.9 with hex head nut & spring washer class 10 as per is:1367, ht allen bolt of size m 20x50, unbreko make allen bolt size m24x100 grade 12.9, hex head bolt of size m 24x100 conf.to is 1364,din 933 property class 10.9 as per is 1367, hexagonal socket head cap screw m33x75 (strong drive) gr-8.8 for coal mill of unit 3 and 4 of sikka tps., bolt m20x70, part no. 0000537201001019, shaft seal assy. (ee) of wanakbori bhel make 210mw, stage i, lmz/lmw generator, hexagonal head screw m30x40 gr-10.9 for coal mill of unit 3 and 4 of sikka tps., hexagonal socket head cap screw m16x25 gr-10.9 for coal mill of unit 3 and 4 of sikka tps., high tensile hexagonal head bolt & nut, size m.20 x 50 mm, full thread (f.t.) mtl: steel conf. to is-1367, half thread socket head allen bolt m12x60 mm, unbrako alenkey full thread bolt : m . 16 x 50, high tensile hex bolt nut m8x25, high tensile hexagonal head bolt and nut of size m8 x 30mm full threaded of gread 10.9, ht hex bolt nut m 8x50 gr.10.5, m8 x l 70 mm hex. head half thread bolt with nut and two washers, high tensile hexagonal head bolt, nut & washer of size m12 x 70mm full threaded of gread 10.9, unbrako hex.bolt m16x70 ft, high tensile hex head bolt nut with washer of size m 16x80 full threaded of gread 10.9, unbraco high tensil hex head bolt m 16x100,grade 10.9, m16x250 mm bolt wiht nut hex.head bolt/nut size4.6, high tensile hexagonal head bolt, size m.20 x 60 mm, full thread (f.t.) mtl: steel conf. to is-1367, ht hex bolt nut size m 20x200

Central Government / Public Sector

CTN :44807068

29 Apr, 2026 NA

Begusarai - Bihar

Tender For corrigendum : supply of stainless steel threaded fasteners as per is 1367(part 14) (q3)

Central Government/Public Sector

CTN :44900424

02 May, 2026 NA

Dahod - Gujarat

Tender For corrigendum : supply of set of high tensile hex head bolt for brake cylinder foundation: (i) size m20 x 65 mm long full threaded 2mm pitch.- qty 01 no. (ii)hex. nut m20 qty 02 nos. (iii) m20 spring lock washer qty 02 nos. (iv) m20 plain washer qty 02 nos. (v) size m20 x 220 mm long with threading of 65 mm at nutside 2mm pitch. qty 01 no. as per is 1363(part1)2002 & is 1363(part 3) 2002 property class 8.8 with zinc plated (one set consists of 08 items) .make tvs or unbrako or lps. note:- material to latest version of bis specn . accepted make:- unbrako/dfl make mfg. by m/s. deepak fasteners ltd. [ warrantyperiod: 30 months after the date of delivery ]

State Government

CTN :44060664

05 May, 2026 NA

Gandhinagar - Gujarat

Tender For corrigendum : supply of various fittings for gtps : : -dropped forged carbon steel 90 degree female equal elbow, nb size-50 mm having threaded end., dropped forged carbon steel 90 degree female equal elbow, nb size-40 mm having threaded end., dropped forged carbon steel 90 degree female equal elbow, nb size-32 mm having threaded end., dropped forged carbon steel 90 degree female equal elbow, nb size-25 mm having threaded end., dropped forged carbon steel 90 degree female equal elbow, nb size-20 mm having threaded end., dropped forged carbon steel 90 degree female equal elbow, nb size-15 mm having threaded end., dropped forged carbon steel hexagonal threaded nipple, male equal nb size-50 mm., dropped forged carbon steel hexagonal threaded nipple, male equal nb size-40 mm., dropped forged carbon steel hexagonal threaded nipple, male equal nb size-32 mm., dropped forged carbon steel hexagonal threaded nipple, male equal nb size-25 mm., dropped forged carbon steel hexagonal threaded nipple, male equal nb size-20 mm., dropped forged carbon steel hexagonal threaded nipple, male equal nb size-15 mm., forged c.s coupling 1-1/4inch dia, 1 1/4inch heavy duty cap, carbon steel, dropped forged carbon steel hexagonal head solid plug, male end bspt threading nb size-32 mm., flange connection sae 3000, size-1.5 inch for 48.3 mm od tube (hydraulic system), ms flange, size- 32 nb, moc- ms, ms flange, ansi/asme b 16.5, class-150, size- 50nb., ms flange, ansi/asme b 16.5, class-150, size- 65nb., ms flange, ansi/asme b 16.5, class-150, size- 80nb., ss316 bend 90 degree size- 1/2inch with 02 flanges (flat face) per bend size- 1/2inch (15 mm) along with fasteners, ss316 bend 90 degree size- 1inch with 02 flanges (flat face) per bend size- 1inch (25 mm) along with fasteners, brass nipple 1inch to 1/2inch, brass nipple 1/2inch, brass nipple 1inch, 25 nb ms seamless nipple sch-80, 40 nb ms seamless nipple sch-80, 50 nb ms seamless nipple sch-160, ms nipple size- 3/8inchx100 mm, ms nipple 1/2inch, nipple 1/2inch, nipple 3/4inch, nipple 1inch, ms nipple size 2inch, ss 304 nipple 1inchx100 mm, ss nipple size- 1/2inchx100 mm, s.s.pipe fitting hex nipple,male npt size-1/2 inch, ss pipe fitting hex reducing nipple,male npt size -1/2 inch, male npt size -1/4 inch, ss hex nipple, size- 1/2inch npt (m) x 1/2inch bsp (m), ss316

Central Government/Public Sector

CTN :44958894

06 May, 2026 NA

Rajkot - Gujarat

Tender For supply of set of fasteners for wheel set earthing housing modification as per drg. no. sked- 945, consisting of 03 items 1) stainless steel stud m8x55mm (mat. aisi 304) with both end threaded length 25mm & 20mm, qty=02nos. 2) stainless steel stud m8x50mm (mat. aisi 304) with both end threaded length 25mm & 15mm, qty=01nos. 3) stainless steel lock nut, m8 (mat. aisi 304), qty=03nos [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44633628

23 Apr, 2026 NA

Vellore - Tamil Nadu

Tender For corrigendum : supply of set of ss fasteners to is 1364, ss 304 a-270 bolt of makeapl/kun, tvs/dfl/vif only and ss flat washer to is-2016 and ss springwashers to is 3063. set consisting of 04 items as given below : - 1)m12 x35 fully threaded -01 no/set. 2)m12 x 30 fully threaded -01 no/set. 3)m12flat washer (3mm thick)- 02 nos/set, 4)m12 spring washer (3mm thick)- 02nos/set [ warranty period: 30 months after the date of delivery ]

Cleats Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors