Latest climbing ladder Tenders | Government climbing ladder Tenders

Corporations/Associations/Others

CTN :45662707

02 Jul, 2026 4.05 Lacs

Multi City - Karnataka

Tender For supply and maintenance of necessary materials for 7 pure drinking water units in bilagi town - item description: painting steel work with deluxe multi surface paint to give an even shade. two coat applied @ 0.90l/10 m² over an under coat of primer applied @ 0.80 l/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of engineer-in-charge.. (pwd sr v-2, 2023-24, item no-8.33.3, page no-46), item description: providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of engineer-in-charge..:(pwd sr 2023-24 / volumme ii / i.no-8.3.2 /p.no-41), item description: supplying and fixing rolling shutters of approved make, made of required size m.s. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to is: 4454 - part 1 and m.s. top cover of required thickness for rolling shutters. 80x1.25 mm m.s. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the engineer-in-charge.(csr 2023-24 v-2 itm no.11.6.1 pg 78), item description: dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of engineer-in-charge. for thickness of tiles 10 mm to 25 mm (pwd sr 2023-24 / volumme ii /i.no-19.22.1 /p.no-189), item description: providing and laying cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 ce ment : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size, including finishing complete as per engineer incharge (pwd sr 2023-24 / volumme ii / i.no-9.4 /p.no-59), item description: flooring with 25mm thick polished shahabad slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications.(pwd sr 2023-24 / volumme ii / i.no- 9.35 /p.no-64), item description: providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered upvc (matching to ral-9016) sections and with minimum tio2 (titanium dioxide) at 6phr with tpe(thermo plastic elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with galvanized iron profile through-out the window frame. the outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and sash with overall size of 39mm x 75mm with gi reinforcement of 2mm and mesh sash of size 37mm x 58mm. coextruded glazing bead for fixing of glass shall be of size 20mm x 24 mm. windows shall be provided with 6mm plain float glass, standard hardware& multi point locking system with touch lock. wall thickness of frame & sash shall be of 2mm-2.5mm. maximum possible size 2419mm x 2200mm (the cost is inclusive of all fixtures and separate charges for minor t&p s shall not be made) (pwd sr 2023-24/volumme ii/i.no-12.90 /p.no-110), item description: providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel prime

Central Government/Public Sector

CTN :45682452

17 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For supply of ladder trolley complete set generally confirming to rdso specification no. tm/sm/465 dated 03.02.2014 (rev 01 of 2020) enclosed with following minor deviations. 1. each trolley set comprises of (1) wheel and axle 2 nos. (2) detachable frame- 1 no. and foldable ms ladder-1 no. 2. the wheel and axle set, frame for the trolley and the ladder for the trolley shall be as per the drawing enclosed. 3.the materialsespecially steel used for fabrication of wheel and axle should confirm to relevant standards wherever applicable. only isi marked, branded ms pipe should be used for fabrication of ladder. the finished ladder should be given one coat of anticorrosive painting 4.seating arrangements, any arrangement for tool box are notrequired in the trolley though mentioned in the rdso specification. 5. where there is any minor deviation in the dimensions between the drawing and the rdso specification is noticed if any, the dimensions in the enclosed drawing shall be adopted. 6. suitable insulating pad or similar insulating material should be provided in the axle such that the two wheels of the axle are not electrically shorted. 7.prototype approval for the finished trolley is not mandatory but preferred. 8. inspection will be carried out by consignee. encl: 1. rdsospecification no.tm/sm/465 dt.03.02.2014 (rev 01 of 2020) 2. drawing no.m/trd/sk/589 [ warranty period: 30 months after the date of delivery ] ]

CTN :45680348

04 Jul, 2026 NA

Delhi - Delhi

Tender For supply of steel box , garden pipe , register 350 page , flag rope , combat cloth , water compere 20 ltr , terracotta paint , black paint , white paint , yellow paint , thinner , chunna , geru , mattress with cover , long table folding , tea hot case 10 ltr , tea hot case 14 ltr , umbrella big size , lo arms , duty jco arms , aluminun folding ladder , garden net 50 mtr , cooler small size , polycarbonate sheet 5 , iron sheet 1 5 x 20 ft , iron nail screw

CTN :45492538

02 Jul, 2026 1.09 Crore

Hyderabad - Telangana

Tender For corrigendum : supply of almirah large steel 1 by 2 hanging 1 by 2 shelving , rostrum , ladder alluminium , almirah small oblique medium 1 by 2 x 1 by 2 sh steel , rack adj 6 tire steel , almirah small oblique medium 1 by 2 x 1 by2 with having shelves steel , table dining 8 person , bin linen multipurpose , book case wooden , locker steel , bed hard steel , rack side with tray steel , table bed side , chair verandah , trestle store room , chair revolvin mb , chair excecutive high back , table executive officers

CTN :45662421

24 Jul, 2026 NA

Barabanki - Uttar Pradesh

Tender For transportation, assembling, launching of important bridge no. 04 (20x61.0m owg) as per drawing no. rdso/b-17182/r series b/t barhalganj - dohrighat stations & fabrication, supplying, erection & launching of owg (ballasted) br no-72(1x30.5 m), br no-95(1x30.5 m) owg (ballasted), br. no. 75(1x30.5 m) owg (ballasted) as per drawing no. rdso/b-17186 series, fabrication, supplying, erection & launching of composite girder for br. no. 106(5x24.4 m) as per rdso drawing no. rdso/b-11751/r3 series and br. no. 82(1x18.3 m), br. no. 88(1x18.3 m), br. no. 105(1x18.3 m) as per rdso drawing no. rdso/b-11753/r3 series of sahjanwa - doharighat new line project of lucknow division, fabrication, supplying, erection & launching of composite girder for br no-43(1x24.4m) as per drawing no. rdso/b-11751/r3 series & br. no- 50a(1x30.5m) owg as per drawing no. rdso/b-17161 series b/t mehdawal - pasai station of khalilabad - bahraich new line & fabrication, supplying, erection & launching of open web girder for br no-404(2x 45.7m) as per drawing no. rdso/b-17181 series & br no-406(3 x 30.5m) as per drawing no. rdso/b-17186 series b/t burhwal- bindaura station in connection with third line work between burhwal - barabanki section & fabrication, supplying, erection and launching of pathway, inspection ladder, trolley refuse of owg & composite girder for above mentioned bridges as per rdso drg. no. cbs-0045 and cbs-0046 and as per approved drawing & balance/left over steel works of robs and any other bridges of north eastern railway.

CTN :45679037

06 Jul, 2026 NA

Coimbatore - Tamil Nadu

Tender For supply of assistance for safety and mech services , maintenance of dcp fire extinguisher 9kg , servicing of fire extinguisher 25kg and 75kg , servicing of fire extinguisher 1kg to 4 5kg , refilling of co2 gas 2kg to 6 8kg , refilling of fire extinguisher 9kg , dcmp mock drill arrangements , foam pourer testing , hydrotesting fire hose , supply of dry chemical powder , supply and fixing hose dcp 9kg , fabrication welding and erection of structural steel , supply and installation safety clip and safety pin , supply and installation discharge hose for 25kg dcp , supply and installation discharge hose for 75kg dcp , supply and installation discharge hose for 4 5kg co2 dcp , supply and installation discharge horn 4 5kg co2 dcp , supply and installation discharge horn 2kg co2 dcp , ultrasonic testing of fire extinguisher , supply and installation luminous wind sock , supply and installation connecting hose , servicing of sprinkler nozzle , servicing of fire hose , welding of pipe all dia , supply and installation of butterfly valve , supply and installation coupling washer , cleaning of strainer 6 inches and above product line , cleaning of strainer upto 6 inches product line , supply and installation of 80mm ci butterfly valve , supply of spark arrestor , supply of fire hose 15mt , supply and installation of sprinkler nozzles , supply and installation fire hose box glass , supply of jet nozzle , supply and installation of hose box , refilling of clean agent cylinder , supply and installation of hydrant cap , cleaning of strainer upto 6 inches for hydrant lines , cleaning of strainer 6 inches and above for hydrant lines , additional manpower assistance , hydrotesting of pipeline , supply application and wrapping for underground pipeline , testing and calibration of tsv and srv , testing and servicing of pv vent 3 inch , testing and servicing of pv vent 6 inch , hiring of hydra crane , pipe modification product drain , hiring of jcb , supply and installation of gland rope for valves , supply and filling of silica gel , hydrotesting of unloading hose , cleaning and greasing of gate valve upto and including 6 inches , cleaning and greasing of gate valve 8 inch and above , servicing of gear operated valves , maintenance of swing ladder , repairing of swivel joint , supply and installation of bolt and nuts , supply and installation of gasket sheet , supply of structural steel erection aligment and welding , refilling of scaba cylinder 200bar and 300bar , product tank cleaning ag tank , removing of dead stock ag and ug tanks , product tank cleaning ug tank , servicing of deluge valve , dismantling of structure , repairing of dcv , fire extinguisher sticker , foam pick up tube , 9kg abc stored pressure operating valve , sply fixg of pressure gauge , calib pressure guage 0 30psi 5 psi

CTN :45455087

26 Jun, 2026 NA

Muzaffarnagar - Uttar Pradesh

Tender For corrigendum : supply of computer table , office side table , chairs , white board , laptop , multi function printer , projector screen , neceeary stationeries , epabx , first add box , seize fire extinguisher , almirah , dining table chairs , side station , bar counter , hostess desk , stroage cabinet , computer pos , dinner plate 11 , dessert plate , b and b plate , tea cup , tea saucer , soup bowl , soup bowl 4.5 , soup spoon chiese , service bowl 1 , service bowl 2 , platter1 port 10 , platter 2 port 12 , pasta plate 11 , cereal bowl , chutney bowl , tea spoon , dessert spoon , dessert fork , soup spoon ,bowl , dessert knife , table spoon , table fork , tea strainer , tea set , water jug , salt and pepper set , tooth pick holder , straw holder , sugar sachet folder , napkin holder , finger bowl large with under liner , entree dish round with lid , oval platter , resered , round tray , rectangular tray , ash tray , tom collins , hi ball , pilsner , decanter small , decanter large , wine glass , table cloth , table napkins , bar tool kit , cocktail shaker , first add kit , iron almirah , internet , white board with marker , overhead projector , desktop , internet access , money currency counter machine , printer scanner , multimedia speaker , first aid box , air conditions , adjustable lights , bar code scanner ,printer , calculator , card swipping machine , carry bag , cashcounting machine , cash drawer , cctv , computer chairs , challen book , clipper hangers , desktop computer , coupons vouchers , credit card , credit notes , currency notes , customer feedback , daily log book , danglers , demo counter , display tool kit , display photographs , display board , dummy product , dummy biling , dummy stock invoice , dustbin , fire alarm , flip chart holder , gift wrapping pper , glow in dark , gondolas , gun tag tagging gun , hanger , hanger stand , housekeeping , labelling macjine , ladder , lcd tv , lead register , shopingcart , locking system , loyalty scheme , mannequins , neck lock for varry bags , offer policy , pallets , paper board , paperpins , peghooks , personal protective , photographs , physical bill copy , posters , projector , publlc address ststem microphone , punching machine , purchase book , safety sing board , security tags and remover , shopping basket , stationary items kit , stock almirah , stock count register , stool molded with steel base , store directory directional signages , uv light fake note detecting machine , vaccuum cleaner , weighing machine , writing board with white npard marke and duster , electronic pay option signage , display photographs of different types of product categories of recent to fit into 1 5 , ups , theft alarm , printer with scanner , 5 port network switch , internet connection , wiiting board with white board marker and duster , external hard disk drive , usb drive , rj45 connecters , web camera , vaccum cleaner , air conditioner , antiverus , printer table , steel cupboard drawe type , electrlcal work includes isi working and fitting , toner cartridges / ink cartridges / consumables for printers (q2) //bid details 2 / 102 (q2)

Central Government/Public Sector

CTN :45660483

29 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - scrap condemned released steel/iron furniture consisting following items such as-iron cot, work man locker, steel table, visitor chair, iron rack, steel cupboard, small rack, iron chair, revolving chair, stretcher, godrej table, table with synmica, cabin chair, steel bucket, computer table, iron pipe ladder, officer chair, steel almirah, folding chair, steel chair with arms, steel draw almirah, metal shelving rack, ,cupboard, tabular steel, pipe frame, computer table and etc, as per online ds 8 notes received.

Central Government/Public Sector

CTN :45224261

27 Jun, 2026 25.02 Lacs

Bardhaman - West Bengal

Tender For corrigendum : supply of jungle cutting sword , spade big , spade small , gaity , dhama , belcha , kanta , hammer , pliers , chisel , sickle , adjustable range , sabol , chopper , axe , pvc pipe 100 ft , safety belt , mosquito net , snake catcher of 6ft , rope of 1 inch thick , ring range , dal range , screw driver , hand held search light , electric extension cord of 30 meters , garbage collection plastic , multipurpose pruning saw , brush cutter safety helmet , disposable mask , apron , abdominal guard , steel dustbin , new rickshaw van , hydraulic tractor , honda bush cutter , spray gun pipe set for spray machine , vanfog fog machine , electrically operated walk behind scrubber dryer , petrol engine operated chain saw , lawn mower , industrial aluminum ladder ) /bid number : gem/2026/b/7550487 * /dated: 16-05-2026 & & / bid document 1 / 33

Central Government/Public Sector

CTN :45513751

29 Jun, 2026 99.52 Lacs

Ahmedabad - Gujarat

Tender For corrigendum : supply of tirfor two pint five tor one point five t , tirfor 5t or 3 t , pull lift zero point seven five t or zero point eight t , ladder trolley suitable to move on railway track , earthing discharge rod complete , aluminium straight ladder extendable type , first aid box made of gi or al sheet , stretcher two fold type , set of 4 fire buckets of 10 l capacity , portable fire extinguisher dry chemical powder , portable fire extinguisher dry chemical powder type and suitably mounted on trolley , d shackeles set of alloy steel , set of steel slings with eye on each end , stainless steel digital micro meter , bench vice 6 inch suitably mounted on steel table , canvass tarpaulin 12m by 12m with ropes and spikes of adequate size , portable 5kva silent diesel gen set with battery push button start , binoculars , vernier calipers digital , digital multi-meter , high sensitivity digital multi-meter , aluminium self supporting stool type magjic pole ladder 8 feet long , drop out fuse pull rod made of fibre body extension type and suitable for use on 25 kv ohe , half inch square drive socket set containing 22 sockets with 5 attachments packed in power coated carrying case , transformer oil acidity testing kit with all accessories , portable arc welding machine 250 a capacity , clip on digital tong tester suitable for measuring ac current 600amp , digital breaker time interval meter , insulation megger with voltage selectable range of 250v and 500 v and 1000 v , supply of automatic transformer oil bdv testing kit , transformer oil filtration plant 125 litre per hour capacity , auto transformer which should be close type dimmer , load cell tester suitable for 40 ah and 200 ah battery , spanners set , 52 pieces socket set with storage case , insulation megger with voltage selectable range , supply of digital ground or earth tester , thermal imaging camera with software , fully automatic capacitance and tan delta test set , transformer oil as per is 12463 , ratchet lever hoist three point two ton , ratchet lever hoist one point six ton , universal come along clamp , extension ladder 2 by22 , pillar drill machine , bench grinder , portable welding generator set , industrial safety belts and harnesses , heavy duty contact wire cutter 36 inch suitable to cut copper contact wire 107 sq.mm , supply of dropper wire cutter size 12 inch. , single sheave pulley block wheel size three point five inch by half inch , single sleave pulley of fibre of size three point five by half , single sleave pulley blockof steel of size six by one , polyester slings with 1 tonne , double ply polyester webbing slings , ply polyesterwebbing slings with load capacity 3 tonne , polyester slings of 4 m and 10 m , supply of contact wire splicing jig suitable to splice 107 sqmm contact wire , angle cutter electric 355 , supply of 5 drill bits rotary hammer drill ndrf , fiber ladder of 11m and 8m , atd bearing removal tool , hydraulic crimping tool , spring loaded stabilizer auger type post hole digger , digital spirit level , single point laser class ii handheld digital infrared thermometer , hydraulic dyanamometer 10 ton capacity with steel carrying box , 4 stroke engine telescopic pole , digital camera , hand operated rotary barrel pump , chain pulley block 3 tonne capacity with standard lift 3 meter as per is 3832 , fibre body handheld electric blower , magic pole ladder 8 feet made out of aluminium side section , transformer oil sampling bottles, size 1500 millilitre in box. , contact resistance meters measuring range 100 milli ohm , digital lcr meter 3 one by two digit 1999 counts , supply //bid details 2 / 62 of magnetic drill machine with magnetic stand , rechargebale portable battery operated hand cutter

Climbing Ladder Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector