Latest cling film Tenders | Government cling film Tenders

Central Government/Public Sector

CTN :45437796

15 Jun, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For supply of linear low density polyethylene (lldpe) film (v3) conforming to is 14500 (q3)

State Government

CTN :45410064

12 Jun, 2026 NA

Faridkot - Punjab

Tender For supply of linear low density polyethylene (lldpe) film (v3) conforming to is 14500 (q3)

CTN :45377268

09 Jun, 2026 NA

Darjeeling - West Bengal

Tender For supply of d cfa re 47 obstetrical elbow length gloves size7 dot 5 , d cfa re 47 euroband pettiband 6 75mm , d cfa re 47 euroband pettiband 12 50mm , d cfa re 47 tube endotrachel with cuff size3 , d cfa re 47 tracheatube introducer boigie 5fr , d cfa re 47 bipolar cautry tip accessory with laureate , d cfa re 47 silicon gel insole medium , d cfa re 47 silicon gel insole large , d cfa re 47 functional humerus support splint medium , d cfa re 47 functional humerus support splint large , d cfa re 47 skin traction kit including elastic traction belt with adjustable velcro straps vinyl sand water bag traction cord , d cfa re 47 disposable hair trimmer blades for surgical preparation one handset with charger to be given for use with every 100 blades , d cfa re 47 cast shoe medium l xl , d cfa re 47 surgical cling film roll sterile 4 dot 5 m 10 variation in size acceptable , d cfa re 47 sterile disposable suction tube with removable cannula , d cfa re 47 kit for aso titre , d cfa re 47 closed suction post op drain spiral slot with tubings in sterile pack consisting of bellow unit connecting tube with clamp and y connector curved trocar , d cfa re 47 disposable tourniquet velcro type * /bid number : gem/2026/b/7603730 + /dated: 30-05-2026 ' ' / bid document 1 / 21

corporations/Associations/Others

CTN :45197600

05 Jun, 2026 NA

Kanpur - Uttar Pradesh

Tender For corrigendum : tender for supply of various types of items -rubber bowl-small hand sanitizer5litre, 80% ethyl alcohol i.p v/v, glycerol 1.p 1.45% v/v, hydrogen peroxide 1.p 0.125% v/v, purified water-qs polythene wrapper (stretch film) tape fastener hook type synthetic (velcro) 25mm wide, is:8156 pop rivet ø 1/8" x 1/4" aluminium aluminium rivet, 5/32" flat head rivet 3x12 mm as per is:2907 copper3x12mm, copper material, 1kg box. flat head rivet 3x20 mm as per 15:2907 copper3x20mm, copper material, 1kg box tape fastener hook type synthetic (velcro) 16mm wide, is:8156 tape fastener loop type synthetic (velcro) 16mm wide, is:8156 tape fastener loop type synthetic (velcro) 25mm wide, is:8156 press button big press button medium wire mesh smooth as per sample smooth wire mesh size-3/4"plastic freeloader strap buckle set (bag accessories), colour-black size-"plastic freeloader strap buckle set (bag accessories), colour-black cone sander (fine) vaseline (500gms in a bottle) steel grip electric tap surform file half round prefabricated shell metal, stainly or equivalent ethaflex 6 mm, 1x1 metre, 6 mm thickness thermoformable, for padding & cosmetic cover purpose in p&o appliances ethaflex 12mm (110cm x 73mm) polyethylene or polyurethanes composition with 110cm x 73mmx 12 mm, density (lbs/cubic ft)-2-3, compression ethaflex 3mm (110cm x 73mm) polyethylene or polyurethanes composition with 110cm x 73mm x3mm, density(lbs/cubic ft)-2-3, compression sheet rubber m.c thick 11/12 mm hard, 50/60 shore "a" r.d. 0.38/0.42 colour as approved beige colour

State Government

CTN :45390153

04 Jun, 2026 1.99 Lacs

Firozpur - Punjab

Tender For supply of linear low density polyethylene (lldpe) film (v3) conforming to is 14500 (q3)

State Government

CTN :45390204

04 Jun, 2026 1.99 Lacs

Firozpur - Punjab

Tender For supply of linear low density polyethylene (lldpe) film (v3) conforming to is 14500 (q3)

Central Government/Public Sector

CTN :45393443

22 Jun, 2026 NA

Kapurthala - Punjab

Tender For supply of exterior stickers for lhb scn coaches, as per drawing: ls83002 alt f w/o item 1,9 & 18, follow material spec. to rdso specification no. rdso/2006/cg-13 rev-01 option b (ref. md46271 dated 01.04.25), packing instruction: exterior sticker/ marking diagram outside set of sidewall stickers should be rolled firmly on a cardboard tube/pipe of aprox. 03 inches diameter of sufficient strength and length more than sticker 2-3 inches of maximum width of sticker . endwall stickers of same set should also be rolled onseperate another cardboard tube/pipe (having similar dimensional and strengthparameter ) in same way. both tubes of one set should be packed together in a bio degradable transparent polyethylene packing. stickers or any edge of sticker should not be found folded in packing. vinyl film side of stickers should be on the outside of tubes.these individual sets are further to be packed in card box (containing bulk quantity of sets). a list should be pasted on each set of transparent polyethylene packing and also on card box (containing bulk quantity of sets) showing pl no., item description, po no., name and address of supplier, date of manufacturing, lot number, lot quantity, list of items in a set etc. [ warranty period: 12 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45394867

03 Jun, 2026 NA

Kapurthala - Punjab

Tender For supply of exterior stickers for ac 3t amrit bharat coaches., as per drawing: lwaccn/pp2-8-3-002 alt ar w/o item 3,16 & 23, follow material spec. to rdso specification no. rdso/2006/cg-13 rev-01 option b (ref. md46271 dated 01.04.2025), packing instruction: exterior sticker/ marking diagram outside set of sidewall stickers should be rolled firmly on a cardboard tube/pipe of aprox. 03 inches diameter of sufficient strength and length more than sticker 2-3 inches of maximum width of sticker . endwall stickers of same set should also be rolled on seperate another cardboard tube/pipe (having similar dimensionaland strength parameter ) in same way. both tubes of one set should be packed together in a bio degradable transparent polyethylene packing. stickers or any edge ofsticker should not be found folded in packing. vinyl film side of stickers should be on the outside of tubes.these individual sets are further to be packed in card box (containing bulk quantity of sets). a list should be pasted on each set of transparent polyethylene packing and also on card box (containing bulk quantity of sets) showing pl no., item description, po no., name and address of supplier, date of manufacturing, lot number, lot quantity, list of items in a set etc. [ warranty period: 12 months after the date of delivery ] ]

State Government

CTN :45377883

02 Jun, 2026 NA

Moga - Punjab

Tender For supply of linear low density polyethylene (lldpe) film (v3) conforming to is 14500

CTN :45151836

06 Jun, 2026 NA

Bathinda - Punjab

Tender For corrigendum : tender for rate contract of mash materials at aiims bathinda - required items, light weight partial absorbable mesh {polyglecaprone + polypropylene}, light weight partial absorbable mesh {polyglecaprone + polypropylene}, polypropylene mesh, polypropylene mesh, polypropylene mesh, polypropylene mesh, polypropylene mesh, tissue separating mesh {polyproplyne+ oxidized regenerated cellulose}, tissue separating mesh {polyproplyne+ oxidized regenerated cellulose}, tissue separating mesh {polyproplyne+ oxidized regenerated cellulose}, tissue separating mesh {polyproplyne+ oxidized regenerated cellulose}, soft polyproplyne and oxidized regenerated cellulose, mesh fixation device, mesh fixation device, macropourous partially absorbable mesh with 2:1strech made of soft polypropylene and polyglecaprone in ratio of 55:45 with unique honeycomb design, macropourous partially absorbable mesh with 2:1strech made of soft polypropylene and polyglecaprone in ratio of 55:45 with unique honeycomb design or macroporous partially absorbable mesh of polypropylen and polylactic acid., macropourous partially absorbable mesh with 2:1strech made of soft polypropylene and polyglecaprone in ratio of 55:45 with unique honeycomb design, macropourous partially absorbable mesh with 2:1strech made of soft polypropylene and polyglecaprone in ratio of 55:45 with unique honeycomb design or macroporous partially absorbable mesh of polypropylen and polylactic acid., macropourous partially absorbable mesh with 2:1 stretch made of soft polypropylene and polyglecaprone in ratio of 55:45 with unique honeycomb design, macropourous partially absorbable mesh with 2:1 stretch made of soft polypropylene and polyglecaprone in ratio of 55:45 with unique honeycomb design, prolene mesh, a permanent barrier separator mesh with 3d polymer matrix on parietal side fused to silicon film on the visceral side to prevent adhesions. mesh should have perforations to prevent seroma formation. should have prefix pp sutures, a permanent barrier separator mesh with 3d polymer matrix on parietal side fused to silicon film on the visceral side to prevent adhesions. mesh should have perforations to prevent seroma formation. should have prefix pp sutures, a permanent barrier separator mesh with 3d polymer matrix on parietal side fused to silicon film on the visceral side to prevent adhesions. mesh should have perforations to prevent seroma formation. should have prefix pp sutures, a permanent barrier separator mesh with 3d polymer matrix on parietal side fused to silicon film on the visceral side to prevent adhesions. mesh should have perforations to prevent seroma formation. should have prefix pp sutures, a permanent barrier separator mesh with 3d polymer matrix on parietal side fused to silicon film on the visceral side to prevent adhesions. mesh should have perforations to prevent seroma formation. should have prefix pp sutures, a permanent barrier separator mesh with 3d polymer matrix on parietal side fused to silicon film on the visceral side to prevent adhesions. mesh should have perforations to prevent seroma formation. should have prefix pp sutures, a permanent barrier separator mesh with 3d polymer matrix on parietal side fused to silicon film on the visceral side to prevent adhesions. mesh should have perforations to prevent seroma formation. should have prefix pp sutures, a permanent barrier separator mesh with 3d polymer matrix on parietal side fused to silicon film on the visceral side to prevent adhesions. mesh should have perforations to prevent seroma formation. should have prefix pp sutures, a permanent barrier separator mesh with 3d polymer matrix on parietal side fused to silicon film on the visceral side to prevent adhesions. mesh should have perforations to prevent seroma formation. should have prefix pp sutures, a permanent barrier separator mesh with polyester knitted mesh on parietal side and polyethylene film on the visceral side to prevent adhesions. mesh s

Cling Film Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors