Latest clutch gear Tenders | Government clutch gear Tenders

Central Government/Public Sector

CTN :44432705

19 Mar, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of rolling stock - condemned bg-8 wheeler wagons- with all available fittings there on but excluding the following reclaimable items - 1)casnub bogie complete set with bolster assembly with brake gear items complete set- 2)wheel set complete with axle,axle box and roller bearing assembly complete set-, 3)centre buffer coupler complete set excluding draft gear and yoke. wagon nos- 1) nr bcnm1 30039060904, 2) sc bcnm1 30099060982 ,3 ) nr bcnm1 30039061710 , 4) er bcnm1 30029061874 ,5) cr bcnm1 30019060795 = 5 wagons. advice note no 023280-25-18649 dt 06.02.2026 location: tondiarpet marshalling yard. custodian: sse - c and w - tnpm. pl.no.98110159, remark:1) rc items to be handed over to the custodian at specified location before final delivery-stores section. (2) cutting permitted to loadable size only. (3) crane loading permitted. (4) purchaser should take safety precaution while cutting of wagons. (5) at the time of delivery all items including zero value items such as rexene, rubber, frp etc., should be removed and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government.

Central Government/Public Sector

CTN :44432706

19 Mar, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of rolling stock - condemned electric loco no. 22011 wap1 as is where is condition with all available ferrous -non ferrous-wooden fittings- excluding the following reclaimable items- (1) wheel set with bull gear- 6 sets (2) axle box with ferrous components-12 nos. removed items- (1) siv 1 no., (2) smoothening reactor (sl) 2 nos., (3) battery 10 nos., (4) lc 6 nos., (5) c145 1 no., (6) sc 18 nos., (7) reverser (j1 & j2) 2 nos., (8) emc 5 nos., (9) epc pneumatic pipe line 30 nos., (10) ctf 1 & 2 2 nos., (11) ctf 3 1 no., (12) sandwich mounting assembly 6 nos., (13) connecting strap 12 nos., (14) brake hanger with shoe 24 nos., (15) cable head termination 1 no., (16) cab fan 4 nos., (17) tap changer 1 no., (18) rps 1 no., (19) radiator 1 no., and (20) aftex 1 no. loco no- 22011 wap1. ds8 no. 063630-25-03256 dt:23.08.25 location: dsl-ed. cus- sse-dsl-ed. pl.no. 98980889. note: (1) rc items to be handed over to custodian at specified location before final delivery. (2) cutting permitted to loadable size only. (3) crane loading permitted. (4) purchaser should take safety precaution while cutting of loco.(5) at the time of delivery all items including zero value items such as rexene, rubber, frp etc., should be removed and cleared by purchaser from railway premises and should be disposed as per the existing norms of central/state government.

Central Government/Public Sector

CTN :44432707

19 Mar, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of rolling stock - condemned and u/s ac emu motor coaches with vailable ferrous, non-ferrous and wooden fittings on " as is where is" basis. excluding the following reclaimable and removed items. rc items: 1) bogies with brake riggings complete set, 2) wheel set with axle, gear wheel and axle box complete set, 3) bronze wering pieces, removed items: 1) traction motor complete set-12 nos, 2) tranformer and reactor-2 units. coach nos- 1) b12089, 2) b12094, 3) b12103. ds8 no. 022688-25-09233 dt:03/01/26 custodian: sse-emu-avd, location: backside of emu workshop-avd, pl.no.98111061. note: (1) rc items to be handed over to custodian at specified location before final delivery. (2) cutting permitted to loadable size only. (3) crane loading permitted. (4) purchaser should take safety precaution while cutting of coaches.(5) at the time of delivery all items including zero value items such as rexene, rubber, frp etc., should be removed and cleared by purchaser from railway premises and should be disposed as per the existing norms of central/state government.

Central Government/Public Sector

CTN :44432708

19 Mar, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of rolling stock - condemned and u/s ac emu motor coaches with vailable ferrous, non-ferrous and wooden fittings on " as is where is" basis. excluding the following reclaimable and removed items. rc items: 1) bogies with brake riggings complete set(for 12104 and 12106), 2) wheel set with axle, gear wheel and axle box complete set, 3) bronze wering pieces(for 12104 and 12106) removed items: 1) traction motor complete set-12 nos, 2) tranformer and reactor-3 units. coach nos- 1) b12104, 2) b12105, 3) b12106. ds8 no. 022688-25-10569 dt:17/02/26 custodian: sse-emu-avd, location: backside of emu workshop-avd, pl.no.98111061. note: (1) rc items to be handed over to custodian at specified location before final delivery. (2) cutting permitted to loadable size only. (3) crane loading permitted. (4) purchaser should take safety precaution while cutting of coaches.(5) at the time of delivery all items including zero value items such as rexene, rubber, frp etc., should be removed and cleared by purchaser from railway premises and should be disposed as per the existing norms of central/state government.

Central Government/Public Sector

CTN :44432713

19 Mar, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond.& u/s diesel/emu/c&w/lhb, equilising beam, buffer, ac loco components such as tooth gears, crank shaft, brake disc, pinion, injector, gear wheel, cylinder liners, grease cup, alternator fan cover filter assembly, cattle guard, sab air brake components, end shield, air brake cylinder components, shock absorber, cattle guard, linear,traction motor spare parts, dust collector, motorman driver seat base with bend, hp cylinder rail guard, outer/inner sleeves of bearing bolts& nuts, air filter, damper, lube oil filter, tiny springs, cowl, rotor, anchor link scrap, sab components, cutoff angle cock, control arm upper, ca lower, traction rod, anti roll bar assembly, axle box components, gears, brake disk, leaf spring, carrier assembly, bearing bolt, centering device, fork eye, coupler sleeve, air pipe assembly, break shoe bolster link, hoop coupler, parking break assembly, coupler front plate, coupler rear plate, break liver, bolster hanger, dust guard, wearing plate, compensating ring, impeller, inner hanger, safety strip, iron bracket above transformer, brake gear components, spring plate, coupler sleeve, brake hanger, yoke lead, coupler bearing, coupler rear plate, coupler clearance plates, wearing plate, brake beam, dust covers, collar, dashpot top, protective tube, gear case vocer, side bearer cover, pins for hanger, machinery items cut pieces, shock absorber, nipplers, cutout cocks, etc., tm pinion, tm parts as holder plate and end shield, axle box parts as axle box cover, axle guide and racer, traction link, the bar, traction housing, spheriblock, brake hangar, pull rod, slack adjuster, knuckle, clevis, screw coupling, cbc coupler and parts, fuffer, cattle guard, labyrinth, bearing for axle box, traction motor and aux motors, damper, sand box, sand ejector, sand pipe, foot step, sand ejector., angle cock and ferrous couplings, lathe machine head, junction box, cutting ferrous, angles, rod, ferrous heater coils, ferrous lamp pipe, transformet brackets, oil lubricator for suspension bearing, lid for gear case, linear, push rod &gudgeon pin, compressor, hood with impeller,ocb ducts, labyrinth, end frame tamper, hanger link, cylinder linear, oil dispersive, axle box cover, servo motor, pantograph, deflector for hitachi traction motor, protective tube collars, alternator cowl of various sorts, anchor link, flushing valve, hydraulic nut,emu scrap including fan body, striker casting with grease adherings(diesel), impeller, guard, compartment sliding doors, compensating ring, end sheild, cartridge with nu bearing,pipe, drum,hoist, gear, impeller, eot crane wheels, eot crane gears , semi permanent coupler, bogie mounted brake cylinder of ac loco,traction link with bush, emu after cooler, cr tank,cbc restrictor,centre pivot block assembly with rubber bush, draw and buff gear, side rod, pull rod, pinion wheel, pull lift chain, door closer, emu coupler,inter cooler, engine head, covers, dooms, pipes, tank, front cover, rear cover, hand rail, after cooler, cylinder body, spring piston, holder plate,sand box, labyrinth, lhb bearings, outer bearing covers, end shield, piston trunk, adjusting rod, palm pull rod, control arm, dbr rf boxes,hoods, brake hanger, brake hanger with head, brake head & semi permanent coupler and parts, bmbc components, bend cover, inspection cover, centrifugal dust collector, cut off angle cock, safety rod, racker arm, valve plate, cylinder bore, bearing cover, emu sliding door, silencer, racer, raiser, bellow plate, door operating cylinder scrap, msu components scrap, labyrinth &pinion shaft(diesel), compensation ring, buff gear, hood with impeller, ront fork complete housing, lb spring set scrap, stator w/o coil, contering dis, anger link with or w/o silent block, oil cup and all other scraps released from diesel / ac loco/emu/c&w/lhb components and all other ms/ci with/without minor non ferrous attachments in as is where is condition. pl no. 980

Central Government/Public Sector

CTN :44432717

19 Mar, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond. & u/s ferrous track machine components such as various sizes of engine frame/body ,gear pump assembly, pinion shaft with gear, tampering unit main frame, tampering unit complete assembly, engine rod, hydraulic pump with iron motors, vaccum pump,sledge chain, ,magnesia cutter chain, conveyor belt chain,bench vice, rail wheel, balance spring, wear plate, silencer, link, cutter bar extension piece, sprocket bcm l angle, wheel disc of sortsand sizes, silencer,jack, various type of screen, connecting elbow tamping tool, tamper coupling, track lifting roller, wearing plates, hook, crank shaft, crane released from utv 048machine in dismantled condition, tm items including shock absorber, chisel, cummins, squeezing cyllender, corner roller, released ot pad with rubber content, cylinder piston rod vibration shaft of sorts and sizes and shapes full/cut with/without fs fittings and all other nature of items released from track machine in as is where is condition.pl no 98050126. custodian: cdms-gsd-rsf-per location: b row bin 13, note: 1) cutting permitted to heavy nature items to lorry loadable size only. 2) loading by crane/jcb is also permitted.3) if any non-ferrous materials found should be handed over to custodian.

Central Government/Public Sector

CTN :44437565

06 Apr, 2026 NA

Ajmer - Rajasthan

Tender For supply of set of spares for the transmission system of platform truck suitable for josts industrial platform truck cap 03 ton -model- jfhf-30-dc 1-self aligning ball bearing 1307 make -flt/zkl/urb/nachi or similar qty-01 2- thrust bearing 51207 make-flt/zkl/urb/nachi or similar qty-01 3-bonnet spring-qty-06 4-bonnet spring clamp -qty-06 5-key-6x6x31-qty-02 6- gunmetal bush qty-05 7-pinion shaft-qty-03 8- roller bearing n208/r140-flt/zkl/urb/nachi or similar qty-01 9-gear wheel-qty-01 10- sprocket (duplex 56 teethx3/8) qty 01 no.

corporations/Associations/Others

CTN :44435072

26 Mar, 2026 NA

Salem - Tamil Nadu

Tender For mtps i mill plant unit i complete dismantling and assembling of mill internals reconditioning renewal of worn out parts bearings replacement of worn out worm wheel with worm shaft and renewal of worm gear hub mill bottom etc in any one mill 1a to 1f

Central Government / Public Sector

CTN :44432587

25 Mar, 2026 NA

Multi City - Telangana

Tender For auction sale of others - ms scrap-ms scrap released condemned unserviceable parts and cut-up parts of wagon consisting of different items 01] hand brake wheel, 175 nos. 02] brake beam, 74 nos. 03] yokes, 10 nos. 04] coupler rods, 650 nos. 05] sab, 45 nos. 06] adopters, 3400 nos. 07] draft gear, 50 nos. 08] primary brake beam, 17 nos. 09] lock lifters, 550 nos. 10] locking plate 2900 nos. 11] top and bottom pivot, 150 nos. 12] coupler body[cbc], 90 nos. 13] lock lifter for cbc 1600 nos. 14] non modified 10 bmbs cylinder 50 nos. 15] different sizes of coil springs 900 nos. 16] brake cylinder 19 nos. 17] knuckle 650 nos. 18] wedges 35 nos. 19] mixed scrap [cutup parts of doors, springs, connecting rods, locking pieces, knuckles, look lifter assembly, footsteps, operating handles, floating lever, air hose carriers, wedge blocks, all types pins, floor channels, branch pipes, all types of brackets, split pins, bolts, nuts, yokes, side frame keys, throwers and other items, etc., 10790 kgs. 20] dom cylinders, 12 nos. total qty-141.887mt(ms-141.011 mt approx., al-60 kg approx., fiber-60 kg approx.,gi-756 kg). total 01 and 02[ for each item]. ds-8 no.013419-25-36988, 36997, 36981 dt.22.10.2025, 013419-25-37083 dt.23.10.2025, 013419-25-48223 dt.26.12.2025, 013419-25-50760 dt.08.01.2026, 013419-25-59365, 59364 dt.25.02.26 and 013419-25-59475, 59416 dt.28.02.2026. loc. available at wagon depot ramagundam stack no 1 located between sick line no.1 and shunting line m16 of scrap yard and stack no. 2 located in scrap shed. delivery by actual weighment basis. note- 1] for bobrn door assembly with spreaders cutting is permitted.2] request for fixation of delivery point should be invariably raised in ireps online only. purchasers are requested to make use of this facility. no representative should be sent to the office of sr. dmm sc for collection of delivery fixation letter. as soon as the balance sale value is received by railways online, delivery order will be issued immediately, to facilitate the purchaser to raise an online request for fixation of delivery point. pl no.98050011. hsn code 72042910. available under sse cnw rdm, state- tg.

Central Government And Public Sector

CTN :44407726

01 Apr, 2026 NA

Surat - Gujarat

Tender For supply of sr. no. 1 limit switch - test service position of ms cgl make 6.6 kv switchgear supplied at kapp-3 and 4 having sap code 490232002 , sr. no. 2 worm wheel segment gear of ms cgl make 6.6 kv switchgear supplied at kapp-3 and 4 having sap code 490021001 , sr. no. 3 rm shaft of ms cgl make 6.6 kv switchgear supplied at kapp-3 and 4 having sap code 490041015 , sr. no. 4 insulating drive of ms cgl make 6.6 kv switchgear supplied at kapp-3 and 4 having sap code 450088148 , sr. no. 5 tripping shaft with springs and trip strip of ms cgl make 6.6 kv switchgear supplied at kapp-3 and 4 having sap code 190241020 , sr. no. 6 closing shaft with springs and trip strip gear box assembly of ms cgl make 6.6 kv switchgear supplied at kapp-3 and 4 having sap code 190241029 , sr. no. 7 auxiliary switch 7 n o plus 7 n c for ms cgl make 6.6 kv switchgear supplied at kapp-3 and 4 having sap code 190232556 , sr. no. 8 big cam with main shaft with bearing and cover of ms cgl make 6.6 kv switchgear supplied at kapp-3 and 4 having sap code 190241037 , sr. no. 9 trip catch assembly with all linkages of ms cgl make 6.6 kv switchgear supplied at kapp-3 and 4 having sap code 460411498 , sr. no. 10 charged discharged indicator assembly with torsion spring and pin of ms cgl make 6.6 kv switchgear supplied at kapp-3 and 4 having sap code 190241085, 190241085s, 190041803 , sr. no. 11 complete pole assembly up to 1250a of ms cgl make 6.6 kv switchgear supplied at kapp-3 and 4 having sap code 4502411550b , sr. no. 12 epoxy support insulator 105 dia of ms cgl make 6.6 kv switchgear supplied at kapp-3 and 4 having sap code 450088009 , sr. no. 13 timer of ms cgl make 6.6 kv switchgear supplied at kapp-3 and 4 having sap code 460232636 , sr. no. 14 plug and plug socket assembly of ms cgl make 6.6 kv switchgear supplied at kapp-3 and 4 having sap code 4500512843p, 4500512843s , sr. no. 15 complete pole assembly up to 3150a of ms cgl make 6.6 kv switchgear supplied at kapp-3 and 4 having sap code 450242310npcil , sr. no. 16 double trip coil of ms cgl make 6.6 kv switchgear supplied at kapp-3 and 4 having sap code 190232905asly , sr. no. 17 closing coil of ms cgl make 6.6 kv switchgear supplied at kapp-3 and 4 having sap code 190232528asly , sr. no. 18 motor cut- off limit switch cherry of ms cgl make 6.6 kv switchgear supplied at kapp-3 and 4 having sap code 460232369 , sr. no. 19 set of 6 nos. isolating contact assembly for 1250a ms cgl make 6.6 kv switchgear supplied at kapp-3 and 4 having sap code 74200018sp10m , sr. no. 20 epoxy support insulator 61 dia of ms cgl make 6.6 kv switchgear supplied at kapp-3 and 4 having sap code 450088029

Clutch Gear Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors