Latest clutch coupling Tenders | Government clutch coupling Tenders

State Government

CTN :45647309

30 Jun, 2026 1.66 Lacs

Panchkula - Haryana

Tender For -providing and fixing of mccb, ms pipe, etc. and spare parts at water works in i/a ph-i, panchkula. (a/mtc. of p.h services in sector-1 to 21 and i/a ph-i and ii, panchkula) - 24.5.1.6:- supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 16 sqmm., 23.22.1.5;- mccb ,distribution boards, mcb`s, rccb`s, change over etc. 1.5. supply and erection of modular case circuit breaker single pole/4 pole on existing wall/pedestal/panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the engineer- in-charge of the work. triple pole mccb 200 to 250 amp, 25 ka [through rate], 23.22.8.3:- mccb ,distribution boards, mcb`s, rccb`s, change over etc. 8.3. sitc four pole on load manual change over switch in ss enclosure of following ratings 200 amp 415 volts [through rate], 20.10.3:- extra for fixing sluice valves/flap valves socketed or flanged including cartage from stores or nearest railway station to site of works 3. 150 mm i/d [through rate], pm017. hire and running charges of crane 20 tonne capacity [rate], el270. m.s. pipe 100mm dia, [rate], ns item:-providing and fixing of spare part of sewer cleaning machine including cost of 40 ltr. hydraulic oil for pump, 12 mtr. suction pipe, 4 set millar coupling including handling and fixing charges complete in all respect to the entire satisfaction of eic.

State Government

CTN :45651300

01 Jul, 2026 1.68 Lacs

Panchkula - Haryana

Tender For providing and fixing of contractor block and other electric components at various t wells in sector 5 panchkula - 24.5.1.6:- miscellaneous items 1.6. supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 16 sqmm [through rate], 20.114.9:- supplying erection, testing of fully automatic electric control panel board for t/wells in pump chamber consisting of ms sheet of thickness 14 gauge duly painted box type floor mounted made of angle frame containing 1 no. fully automatic air brake starter suitable for motor of the following capacity, min switch of suitable range with hrc fuse, 1 no. volt meter (0 to 500 volts), 1 no. amp. meter of 0 to 100 amp. 3 sets of indicating lamp capacitor of suitable capacity and 1 no. single phase preventers with the timer switch including wiring in panel board and suitable electric energy meter wiring in electric control panel board complete in all respect as per specification given in schedule no. ii, including mcb, suitable, capacitor, wooden box etc as per site requirement complete in all respect. 9. 50 hp motor [through rate], 20.10.3 :- extra for fixing sluice valves/flap valves socketed or flanged including cartage from stores or nearest railway station to site of works 3. 150 mm i/d [through rate], 20.11.3 :- providing and fixing cast iron double flanged swing check type reflux (non return) valves pn-1.6 marked with is:5312 including nuts and bolts marked with is:1363, rubber sheet marked with is:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. complete in all respect to the satisfaction of engineer-incharge 3. 150 mm i/d [through rate], 20.84:- providing and fixing of insulated rubber matting suitable for 11 kv installation 1 m x 2 m x 12 mm thick (is code 15652-40091) as per specification complete and as per directions of engineer-in-charge [through rate], ns item:- providing and fixing of contractor block mnx 80 landt make as per satisfaction of engineer-in-charge and attesting on load, ns item:- hiring of electronic borewell camera for videography 350 deep borewell urgently required for internal photography complete in all respect to the entiresatisfaction of engineer-in-charge, ns item:- measurement of discharge at tubewell of 1 hr after opening of upper bend with help of discharge flow meter including dismantling and reassembling of tee bend with help of chain block labour tool and plantcomplete in all respect (note any damage to site and material is responsibilityof the contractor)

Central Government/Public Sector

CTN :45664085

30 Jul, 2026 NA

Prayagraj - Uttar Pradesh

Tender For supply of clutch coupling set for 09-3x tamping unit, plasser part no. ud-25-619, drg. no. tx-1064a, tx-1064b,specification no. tm/cpoh/6/tx-012 make-plasser or equivalent to plasser [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45665749

20 Jul, 2026 NA

Sarni - Madhya Pradesh

Tender For procurement of complete set of 02 nos. submersible water pump along with flanged flexible hose pipe of 15 meter length for dm plant in ph-iv stps, sarni.

Central Government/Public Sector

CTN :45646693

13 Jul, 2026 41.00 Lacs

Bhuj - Gujarat

Tender For certain repairs to water supply distribution lines and other connected items at zone c at mil stn bhuj and gandhidham under ge(a) bhuj - taking up u/s ac/gi/di/upvc water main (incl all fitting) with spigot & socket /ms pipe or any other type of pipe or lead joint incl burning out joint & recovering lead from pipe of 200 mm bore for laying /rerouting of serviceable pipe after cleaning complete all as specified and directed., all as per item 1 above but 150 mm dia bore complete all as specified and directed., all as per item 1 above but 100 mm dia bore complete all as specified and directed., all as per item 1 above but 80 mm dia bore complete all as specified and directed., all as per item 1 above but 50 mm dia bore complete all as specified and directed., material and labour di pipes of size 200 mm bore with spigot and socket end centrifugally cast class "k- 7" , in any length laid in trenches/on surface/ over masonary pillar and connection to old or new position complete all as specified and directed., material and labour di pipes of size 150 mm bore with spigot and socket end centrifugally cast class "k- 7" , in any length laid in trenches/on surface/ over masonary pillar and connection to old or new position complete all as specified and directed. note: di fitting /lead joint / tyton joint will be measured and paid seperately all the dismanted / demolished /taking down material shall be reused or removed from site., all as per item 7 above but 100 mm dia bore complete all as specified and directed., supply and fixing in any length upvc pipe 150 mm dia pipe manufactured as per astm-d-1785 as per is-559, schedule-40 complete with fittings, laid in trenches in required length complete all as specified and directed., all as per item 9 above but 100 mm dia bore complete all as specified and directed., all as per item 9 above but 80 mm dia bore complete all as specified and directed., all as per item 9 above but 50 mm dia bore complete all as specified and directed., m&l di bend any type radius and angle tapers any type straght bend increacing decreacing or double socket etc) tee pipe single branch y juction double branch cross(all socket and spiogat collars caps and plug for the pipe socket & spiogat of pipe size upto 200 mm dia complete all as specified and directed. ( lead /gasket for fitting shall be measured and paid separately), s & f in repair upvc ball valves with operating handle (stop valve) of size 50 mm dia complete suitable for fittings with astm - 1785, schedule 40 upvc pipes complete all as specified and directed., s & f in repair upvc ball valves with operating handle (stop valve) of size 80 mm dia complete suitable for fittings with astm - 1785, schedule 40 upvc pipes complete all as specified and directed., excavation in trenches in soft / loose soil nexc 1.5 mtr wide and not exc 1.5 m in depth etc complete and getting out in soft soil inciuding trimming sides and bottom of trenches complete all as specified and directed., rentring filling in trenches including watering and well ramming in layer not exc 25 cm thick in soft/ loose soil complete all as specified and directed., removing excavated surplus soil to a distance not exc 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed., hard standing cutting/road cutting for laying of pipe and making surface good with pcc 1:3:6 complete all as specified and directed., taking down carefully cast iron sluice valve of size 80 mm to 200 mm bore from ci water mains, complete with all acessories complete all as specified and directed., s&f in repair sluice valves flanged end, cast iron body, flanged and drilled and non rising type stainless steel spindle with nut, long body, class p n 1.6, conforing to is 14846 of 2000 for following sizes including all flange joint with rubber or fiber board, bolts, nuts and washers complete including pumping out accumulated water

corporations/Associations/Others

CTN :45467695

26 Jun, 2026 14.44 Lacs

Anpara - Uttar Pradesh

Tender For corrigendum : supply of miscellaneous items for atp anpara - ss shim (non magnetic) size:-2.0 mm thickness, ss shim (non magnetic) size:-1.0 mm thickness, ss shim (non magnetic) size:-0.5 mm thickness, ss shim (non magnetic) size:-0.2 mm thickness, ss shim (non magnetic) size:-0.1 mm thickness, ss shim (non magnetic) size:-0.05 mm thickness, ss shim (non magnetic) size:-0.02 mm thickness, eco hanger bolt with one nut two washer for economiser upper bank coil, as per sample, material: ss304, eco hanger bolt with one nut two washer for economiser lower bank coil,, as per sample, material: ss304, bend 90 degree ms 200nb, erw m.s. black plane end pipes size 300 mm conforming to is, c.iron double flanged swinging nrv 300mm, c.i. gate valve 150 mm both end flanged, ci gate v/v: 100 mm both end flanged., c.i. gate valve 80 mm both end flanged., both end flanged swinging nrv 250mm, coal gate bearing with bearing housing, bearing no. 6205zz fitted in its special bearing housing as per sample, 32 nb, gun metal, manual gate valves, screwed in bonnet, integral seat, rising stem, screwed female end, temp withstand 45degc medium -, air/water is: 318 (grade ltb 2), gate valve, size 80 mm nb with flange end

State Government

CTN :45655021

07 Jul, 2026 22.06 Lacs

Bellary - Karnataka

Tender For procurement of rtd and thermocouple spares - eeic2_tc r type flanged tw, eeic2_triplex tc turbine brg7, eeic2_temp switch mrhs ts2, eeic2_temp switch mrhs ts1, eeic2_thermostat hpbp osu, eeic2_temperature sensor, eeic2_rtd oil temp plos, eeic2_ter head k type tc bcwp, eeic2_terminal head k tc bcwp, eeic2_hc lo rtd temp txr, eeic2_hc bearing rtd temp txr, eeic2_ah sb gb temp switch, eeic2_temp switch hpu, eeic2_k type tc with fl tw 1200mm

Central Government/Public Sector

CTN :45657906

15 Jul, 2026 NA

Bangalore - Karnataka

Tender For supply of angle , shim , washer , gasket , swgd pipe end-fitting nut , pin , pin , hdd shear , pin , pin , hdd shear , collar , collar , housing , bearing-bush , collar , shaft , cap end , bolt , housing , cap , bushed end , shaft , coller , bearing-bush , spring , spring , pin , cylinder , bearing , cap , end-fitting , piston , rod , spring , spring , washer , washer , washer , flat , washer , washer , flat , washer , flat , washer , tab , ferrule-rat door , retaining plate , retaining plate , flanged bush , retaining plate

CTN :45658174

07 Jul, 2026 17.77 Lacs

Rampur-Up - Uttar Pradesh

Tender For supply of supply 100mm m s pipe isi mark including flange nut bolt rubber , supply and fixing of jointing delivery line to main with material , supply and fixing 100mm size c i m s bend with all attachment complete , sf 100mm ci tee with all attachment , supply and laying of 100mm ms with flanges nut bolt packing etc , supply of 100mm dia of hand wheel operated with sluice valves destination including all taxes and insurance , supply of 100mm hand wheel ci double flanged valve operated with sluice valves destination including all taxes and insurance , supply and fixing 100mm size fire attend with pipe line attached , ci pipe 110mm leakage work complete , nalkup lowering and lifting work with include lifting machine fitting valves coupling and nut bolt , l e d plate , l e d sisa , sandf of 6 amp to 32 amp spmcb 10 ka c curve , supply and wiring of submains with 2 nos 25 sq mm frlsh pvc 1100v single core multistrand copper cable in existing conduit complete with all materials labour tandp as directed by engineer in charge , supply of electric power contactor 32 ampere 03 pole ac maximum power 21 w 400v , supply of electric power contactor 63 ampere 03 pole ac maximum power 21w 400v , supply of pvc electric tap grill roll multi colour , supply of onoff vintage bakelite light black switch 2way 06 amp to 16ampere 240 vol , sandf of 63 amp 4pole change over switch on 40x40x6mm angle iron frame including cost of labour tandp painting and material required for completion as per direction of engineer in charge , supply and laying of 06sqmm 2core al pvc insulated armoured cable 1100v in existing masonry open duct including proper earthing connection with clamps etc complete as directed by engineerincharge , supply and wiring of submains with 2 nos 06 sq mm 2core frlsh pvc 1100v single core multistrand copper cable in existing conduit complete with all material labour tandp as per engineer in charge

CTN :45666905

03 Jul, 2026 NA

Ambala - Haryana

Tender For supply of valves & seal kits actuator operated butterfly valves, cast iron heavy duty manual hand lever operated wafer type butterfly valves(as per is:13095), cast iron heavy duty gear operated wafer type butterfly valves, cast iron flanged ends (heavy duty) sluice valve (non rising spindle) with g.m working parts & s.s spindle confirming, cast iron heavy duty flanged ends rubber, rubber seal kit for pan cutover valve

Clutch Coupling Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors