Latest cms crossings Tenders | Government cms crossings Tenders

Central Government/Public Sector

CTN :45697300

16 Jul, 2026 20.00 Lacs

Akhnoor - Jammu And Kashmir

Tender For maint of road side lighting works and miscellaneous electrical items under ge n akhnoor. - labour for cutting/pruning of tree branches along security light pole around 2 mtr radius of security light fitting and removing from site including arrangement of t&p (i.e. axe, rope & ladder etc.) complete all as specified and directed., dismantling and taking down street light fittings/post top lantern/down lighter of any wattage/size for repair or replacement of burnt/worn out accessories or carrying to mes store and refixing after repair on required location complete all as directed.note: accessories or components needed for replacement shall be measured and paid separately under appropriate items., repairing of unserviceable led street light any make/model of 90 100 watt capacity by replacing compact led electronic driver suitable to operate on 120 to 270 volt, 50/60 hz ac supply, protection grade ip-66 with surge protection complete all as specified and directed., repairing of unserviceable led street light any make/model of 60 72 watt capacity by replacing compact led electronic driver suitable to operate on 120 to 270 volt, 50/60 hz ac supply, protection grade ip-66 with surge protection complete all as specified and directed., pvc conduit medium grade of size 15 mm bore including fittings, isi marked, fixing with pcc pole/steel tubular pole/garden lights/gate lights for wiring connection from pole box to light fitting and supporting with 03 nos gi strip clamp, nut & bolt, complete all as specified and directed., replacement of pvc insulated pvc sheathed stranded copper conductor cable 2.5 sqmm twin core complete all as specified and directed., pvc insulation tape of width 18 mm, thickness 0.125 mm, length 25 mtr, isi marked, for proper insulation of joints in wire where required or directed., replacement of aluminium pvc service wire 2 core 6 sqmm flat roll of 90 mtr, superior quality, complete all as specified and directed., disconnecting & dismantling of damaged/unserviceable cable of any type/make and supply & laying in repair/replacement of cable xlpe insulated, screened pvc bedded, galvanized steel strip or wire armoured electric power cables (heavy duty), 1100 volts grade with stranded aluminium conductor using lugs/ferrules at both ends of cable and testing complete all as directed for following sizes:, 10 sqmm 4 crore, 16 sqmm 4 crore, 25 sqmm 3.5 crore, 35 sqmm 3.5 crore, note for item no. 17 & 18: excavation & earth work, sand cushioning, bricks protection & gi pipe where required shall be measured and paid separately., excavation in trenches not exceeding 1.5 mtr width and not exceeding 1.5 mtr depth, getting out for electric cable complete in any type of soil complete all as specified and directed., removing surplus excavated soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above starting point, complete all as specified and directed., returning, filling in, soil obtained from excavation including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick, complete all as specified and directed., supply and laying sub class b bricks laid dry and flat across the length of cable for protection of cable complete all as specified and directed., sand cushioning with ganga sand to underground cable (8 cm thick before laying and 15 cm thick after laying the cable) complete all as specified and directed., replacement of 40 mm gi tubing light grade with all necessary fittings laid in trenches/under road crossing/fixed on pole/wall/under floor/as garden post including 2 nos mild steel fi clamps 35 3 mm size to support pipe with pole complete all as specified and directed., boring under road horizontally of size 40/50 mm bore using gi pipe for passing of cable in road/path in hard/soft/loose soil complete all as specified and directed., applying two coats of aluminium paint over a coat of red oxide on steel tubular po

Central Government And Public Sector

CTN :45453149

30 Jun, 2026 NA

Bilaspur - Chhattisgarh

Tender For in-situ reconditioning of existing worn-out cms crossings by rdso approved technology under the jurisdiction of senior divisional engineer/north of bilaspur division.

CTN :45424823

25 Jun, 2026 NA

Karwar - Karnataka

Tender For manual ctr work on main line points & crossings between lol-haa with 60 kg turnouts and weldable cms crossings under the jurisdiction of divisional engineer, madgaon in karwar region over konkan railway in karnataka state (computer no : 69729)

CTN :45404365

30 Jun, 2026 NA

Bokaro - Jharkhand

Tender For (1)improvement of level crossing approach road at lc no.tb-15, bg-27, tb-17 and drt road from bg 30 to 31 and gate goomty repair at tb-15 (2)improvement of level crossing with approach road, rubberised surface of lc and water supply arrangement & at supply in lc gate under the jurisdiction of aden/bokaro steel city.

Central Government / Public Sector

CTN :45396862

15 Jun, 2026 NA

Kazipet - Telangana

Tender For manufacturing and supply of single piece spring inserted reusable seize nut for size m-25 lock nut m 025. dimensional requirement of the nut shall be as under (as per irs/t-23) and generic specifications (provisional) for self-locking nuts to be used in bolts for track fittings. basic material of the nut shall be of steel conforming to chemical composition, mechanical and physical properties mentioned in is-1367 part-06 or equivalent standards ensuring the performance requirements of indian railways as mentioned in this document with materials electro galvanizing or hot-dip galvanizing or nickel alloy coating etc. tenderer must enclose as per din 65151-dynamic testing of the locking characteristics of fasteners under transverse loading conditions (vibration test) or nas3350(national aerospacestandard)- vibration test requirements for high quality, self-locking nuts, used at temperatures up to 800 degrees f or iso 7481:2000 aerospace -nuts, self-locking, with maximum operating temperature less than or equal to 425 degrees c. brinell hardness of the nut shall be 139-287 hbw (as per sub-clause 9.1 of is 1367 part-6)along with tender. pitch screw threads for check rails of isejs and fish plated joints of cms crossings 28 & 25 mm pitch in 3 mm . [warranty period: 60 months after the date of delivery ] [ warranty period: 60 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45117828

15 Jun, 2026 NA

Kazipet - Telangana

Tender For corrigendum : manufacturing and supply of single piece spring inserted reusable seize nut for size m-25 lock nut m 025. dimensional requirement of the nut shall be as under (as per irs/t-23) and generic specifications (provisional) for self-locking nuts to be used in bolts for track fittings. basic material of the nut shall be of steel conforming to chemical composition, mechanical and physical properties mentioned in is-1367 part-06 or equivalent standards ensuring the performance requirements of indian railways as mentioned in this document with materials electro galvanizing or hot-dip galvanizing or nickel alloy coating etc. tenderer must enclose as per din 65151-dynamic testing of the locking characteristics of fasteners under transverse loading conditions (vibration test) or nas3350(national aerospacestandard)- vibration test requirements for high quality, self-locking nuts, used at temperatures up to 800 degrees f or iso 7481:2000 aerospace -nuts, self-locking, with maximum operating temperature less than or equal to 425 degrees c. brinell hardness of the nut shall be 139-287 hbw (as per sub-clause 9.1 of is 1367 part-6)along with tender. pitch screw threads for check rails of isejs and fish plated joints of cms crossings 28 & 25 mm pitch in 3 mm . [warranty period: 60 months after the date of delivery ]

Central Government/Public Sector

CTN :45338981

29 May, 2026 NA

Chennai - Tamil Nadu

Tender For sr.den/west/mas jurisdiction: reconditioning of cms crossings in situ by using rw-20 translamatic robotic welding technology in aden/ajj, kpd & jtj sub divisions.

Central Government/Public Sector

CTN :45090201

29 May, 2026 NA

Chennai - Tamil Nadu

Tender For corrigendum : sr.den/west/mas jurisdiction: reconditioning of cms crossings in situ by using rw-20 translamatic robotic welding technology in aden/ajj, kpd & jtj sub divisions.

Central Government / Public Sector

CTN :45289224

04 Jun, 2026 NA

Multi City - Telangana

Tender For auction sale of pway scrap - cms xings -scrap cond. unserviceable released cms crossings different sizes 1] 52kg 1 in 8.5, 03nos and 1 in 12, 01nos, stack no 01,07,08,13 [total four stacks] 2] 60kg 1 in 8.5, 05nos and 1 in 12, 24nos, stack nos. 01 to 13, 02 to 06,09 to 12 and 14 to 15 [total twenty four stacks], udm lot no. 014096-26-00001 and 00006, loc. available at bgsf,jmkt,opl and hsp yards km 330/31-33, 31-29,28-26, 331/12-14, 354/20-22,10-12, 19-21, 355/19-21, 4-6, hsp/bs2/7-8, 343/18-20, 22-24, 17-15, 11-13, 11-9, 342/5-7, 3-5, 325/35-37, 26-28, 323/19-17, 324/18-20. 33nos, 29.550mt, delivery by actual weighment basis. pl no.98012344 hsn code 72042910 note- as per railway boards letter dt.23/12/2021, 3 days advance intimation is to be given to rpf for witnessing of deliveries. the same has been reiterated by dsc/rpf/sc vide letter dated 22/09/2025. firms are therefore requested to take this period into consideration while uploading their requests for delivery so that deliveries are completed on time, well within the fdp. available under sse p.way n kzj, dist. hanumakonda and krmr state tg.

Central Government / Public Sector

CTN :45117188

01 Jun, 2026 NA

Kazipet - Telangana

Tender For supply of ms tapered washer to rdso drg.no.t-3930 used for cms crossings 1 in 12 , 60/52 kg rails as per irs specification t-10-2025 & t-29-2024(revised) with latest amendment as on opening of tender. ]

Cms Crossings Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors