Latest cnc chucker Tenders | Government cnc chucker Tenders

CTN :44463994

10 Jun, 2026 NA

Tiruvallur - Tamil Nadu

Tender For corrigendum : supply of cnc chucker double ended for torsion bar

CTN :45404122

09 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

Central Government/Public Sector

CTN :45405302

12 Jun, 2026 NA

Kota - Rajasthan

Tender For supply of heavy duty revolving centre of precision grade 90 degree, shank size mt-6 for conventional lathe machine, axial load capacity 1200 kg, confirming to is:3793. [ warranty period: 30 months after thedate of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government And Public Sector

CTN :45400984

09 Jun, 2026 NA

Multi City - Punjab

Tender For auction sale of depot miscellaneous scrap - scrap old condemned various types of machinery such as (1) batery operated scissor (mw-1420), (2) hot & cold for cleaning (mw-1396) (3) electric brazing machine (mw-1431), (4) welding set (mw=1175,1281 & 1202), (5) hydrulic press 50 ton (mw 775), (6) fuel injection test equipment with accessories (mw-564) , (7) cnc stud turning machine (mw-1144),& cnc centre lathe machine, (8) hand operated hydraulic pallet (mw-772 & 773), (9) twin spindle cnc chucker (mw-1138) to pl no-98321006

corporations/Associations/Others

CTN :45368409

17 Jun, 2026 NA

Nagpur - Maharashtra

Tender For auction sale of bombay all greaed heavy duty lathe,hmt centre lathe,precision lathe machine,air compressor,battery,ewaste,scanner,iron scrap,misc items

Central Government / Public Sector

CTN :45103701

28 May, 2026 NA

Chittoor - Andhra Pradesh

Tender For design, manufacture, supply, installation, testing, prove-out, commissioning, and training of a heavy-duty, high-speed precision centre lathe machine as per the technical specifications attached as annexure-a. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45104638

28 May, 2026 NA

Mumbai - Maharashtra

Tender For design, manufacture, supply, installation, testing, prove-out, commissioning, and training of a heavy-duty, high-speed precision centre lathe machine as per the technical specifications attached as annexure-a. [ warranty period: 30 months after the date of delivery ]

CTN :44894237

12 May, 2026 NA

Hyderabad - Telangana

Tender For corrigendum : supply of high precision lathe machine type-1 (center height 220 mm and length 1500 mm) make -hmt, nh22 , high precision lathe machine type -2 (center height 260 mm and length 2000 mm) make - hmt, nh26

Central Government/Public Sector

CTN :43369763

07 May, 2026 NA

Bangalore - Karnataka

Tender For bid to ras corrigendum : supply of supply of tools and accessories for lathe drilling machine and tool room precision work d d - h7 - as per sl.no.32 of technical specifcation , hss machinereamer-8 h7- as per sl.no.33 of technical specifcation , hss machinereamer-10 h7 - as per sl.no.34 of technical specifcation , hss machine reamer-12 h7 - as per sl.no.35 of technical specifcation , hss machine reamer-15 h7 - as per sl.no.36 of technical specifcation , hack saw frame- as per sl.no.37 of technical specifcation , hack saw blade - as per sl.no.38 of technical specifcation , ball pin hammer - as per sl.no.39 of technical specifcation , rubber hammer - 2inch- as per sl.no.40 of technical specifcation , combination spanner set - as per sl.no.41 of technical specifcation , lathe dog-bent type -as per sl.no.42 of technical specifcation , lathe dog-bent type -as per sl.no.43 of technical specifcation , lathe dog-bent type - as per sl.no.44 of technical specifcation , lathe dog-bent type - as per sl.no.45 of technical specifcation , bench vice -200mm -as per sl.no.46 of technical specifcation , bench vice -200mm -as per sl.no.47 of technical specifcation , wheel dresser - as per sl.no.48 of technical specifcation , plain combined drill - as per sl.no.49 of technical specifcation , plain combined drill - as per sl.no.50 of technical specifcation , plain combined drill - as per sl.no.51 of technical specifcation , ratchet type wrenches - as per sl.no.52 of technical specifcation , letter punch - as per sl.no.53 of technical specifcation , number punch - as per sl.no.54 of technical specifcation , parting tool - as per sl.no.55 of technical specifcation , parting tool inserts - as per sl.no.55a of technical specifcation , clamp screw - as per sl.no.55b of technical specifcation , wrench - as per sl.no.55c of technical specifcation , parting tool - as per sl.no.56 of technical specifcation , parting tool inserts - as per sl.no.56a of technical specifcation , wrench torx - as per sl.no.56b of technical specifcation , clamp screw - as per sl.no.56c of technical specifcation , parting tool holder- - as per sl.no.57 of technical specifcation , parting blade - as per sl.no.57a of technical specifcation , parting inserts - as per sl.no.57b of technical specifcation , parting tool holder - as per sl.no.58 of technical specifcation , parting blade - as per sl.no.58a of technical specifcation , parting insert - as per sl.no.58b of technical specifcation , screws - as per sl.no.58c of technical specifcation , allen key _spares as per sl.no.58d of technical specifcation , boring bar - as per sl.no.59 of technical specifcation , insert screws - as per sl.no.59a of technical specifcation , boring bar - as per sl.no.60 of technical specifcation , insert screws -as per sl.no.60a of technical specifcation , boring bar - as per sl.no.61 of technical specifcation , inserts for the boring bars - as per sl.no.61a of technical specifcation , insert screw- as per sl.no.61b of technical specifcation , boring bar - as per sl.no.62 of technical specifcation , insert screw- as per sl.no.62a of technical specifcation , boring bar - as per sl.no.63 of technical specifcation , inserts for boring bars - as per sl.no.63a of technical specifcation , insert screw - as per sl.no.63b of technical specifcation , boring bar - as per sl.no.64 of technical specifcation , inserts for boring tool - as per sl.no.64a of technical specifcation , insert screw- as per sl.no.64b of technical specifcation , torx-wrench - as per sl.no.64c of technical specifcation , boring bar - as per sl.no.65 of technical specifcation , inserts for boring bar- as per sl.no.65a of technical specifcation , shim _spares - as per sl.no.65b of technical specifcation , shim pin _spares - as per sl.no.65c of technical specifcation , lever _spares - as per sl.no.65d of technical specifcation , clamp screws _spares - as per //bid details 2 / 124 sl.no.65e of technical specifcation , turning tool - as per sl.no.

CTN :44947797

30 Apr, 2026 NA

Thiruvarur - Tamil Nadu

Tender For providing of custom bid for services - one time preventive maintenance of 02 nos of askar micron cnc chucker double ended machines as per scope of work annexure a on whole job basis

Cnc Chucker Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

corporations/Associations/Others

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector