Latest cnc lathe trainer Tenders | Government cnc lathe trainer Tenders

Central Government/Public Sector

CTN :45405302

12 Jun, 2026 NA

Kota - Rajasthan

Tender For supply of heavy duty revolving centre of precision grade 90 degree, shank size mt-6 for conventional lathe machine, axial load capacity 1200 kg, confirming to is:3793. [ warranty period: 30 months after thedate of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45404122

09 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

corporations/Associations/Others

CTN :45368409

17 Jun, 2026 NA

Nagpur - Maharashtra

Tender For auction sale of bombay all greaed heavy duty lathe,hmt centre lathe,precision lathe machine,air compressor,battery,ewaste,scanner,iron scrap,misc items

Central Government / Public Sector

CTN :45103701

28 May, 2026 NA

Chittoor - Andhra Pradesh

Tender For design, manufacture, supply, installation, testing, prove-out, commissioning, and training of a heavy-duty, high-speed precision centre lathe machine as per the technical specifications attached as annexure-a. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45104638

28 May, 2026 NA

Mumbai - Maharashtra

Tender For design, manufacture, supply, installation, testing, prove-out, commissioning, and training of a heavy-duty, high-speed precision centre lathe machine as per the technical specifications attached as annexure-a. [ warranty period: 30 months after the date of delivery ]

CTN :44894237

12 May, 2026 NA

Hyderabad - Telangana

Tender For corrigendum : supply of high precision lathe machine type-1 (center height 220 mm and length 1500 mm) make -hmt, nh22 , high precision lathe machine type -2 (center height 260 mm and length 2000 mm) make - hmt, nh26

Central Government/Public Sector

CTN :43369763

07 May, 2026 NA

Bangalore - Karnataka

Tender For bid to ras corrigendum : supply of supply of tools and accessories for lathe drilling machine and tool room precision work d d - h7 - as per sl.no.32 of technical specifcation , hss machinereamer-8 h7- as per sl.no.33 of technical specifcation , hss machinereamer-10 h7 - as per sl.no.34 of technical specifcation , hss machine reamer-12 h7 - as per sl.no.35 of technical specifcation , hss machine reamer-15 h7 - as per sl.no.36 of technical specifcation , hack saw frame- as per sl.no.37 of technical specifcation , hack saw blade - as per sl.no.38 of technical specifcation , ball pin hammer - as per sl.no.39 of technical specifcation , rubber hammer - 2inch- as per sl.no.40 of technical specifcation , combination spanner set - as per sl.no.41 of technical specifcation , lathe dog-bent type -as per sl.no.42 of technical specifcation , lathe dog-bent type -as per sl.no.43 of technical specifcation , lathe dog-bent type - as per sl.no.44 of technical specifcation , lathe dog-bent type - as per sl.no.45 of technical specifcation , bench vice -200mm -as per sl.no.46 of technical specifcation , bench vice -200mm -as per sl.no.47 of technical specifcation , wheel dresser - as per sl.no.48 of technical specifcation , plain combined drill - as per sl.no.49 of technical specifcation , plain combined drill - as per sl.no.50 of technical specifcation , plain combined drill - as per sl.no.51 of technical specifcation , ratchet type wrenches - as per sl.no.52 of technical specifcation , letter punch - as per sl.no.53 of technical specifcation , number punch - as per sl.no.54 of technical specifcation , parting tool - as per sl.no.55 of technical specifcation , parting tool inserts - as per sl.no.55a of technical specifcation , clamp screw - as per sl.no.55b of technical specifcation , wrench - as per sl.no.55c of technical specifcation , parting tool - as per sl.no.56 of technical specifcation , parting tool inserts - as per sl.no.56a of technical specifcation , wrench torx - as per sl.no.56b of technical specifcation , clamp screw - as per sl.no.56c of technical specifcation , parting tool holder- - as per sl.no.57 of technical specifcation , parting blade - as per sl.no.57a of technical specifcation , parting inserts - as per sl.no.57b of technical specifcation , parting tool holder - as per sl.no.58 of technical specifcation , parting blade - as per sl.no.58a of technical specifcation , parting insert - as per sl.no.58b of technical specifcation , screws - as per sl.no.58c of technical specifcation , allen key _spares as per sl.no.58d of technical specifcation , boring bar - as per sl.no.59 of technical specifcation , insert screws - as per sl.no.59a of technical specifcation , boring bar - as per sl.no.60 of technical specifcation , insert screws -as per sl.no.60a of technical specifcation , boring bar - as per sl.no.61 of technical specifcation , inserts for the boring bars - as per sl.no.61a of technical specifcation , insert screw- as per sl.no.61b of technical specifcation , boring bar - as per sl.no.62 of technical specifcation , insert screw- as per sl.no.62a of technical specifcation , boring bar - as per sl.no.63 of technical specifcation , inserts for boring bars - as per sl.no.63a of technical specifcation , insert screw - as per sl.no.63b of technical specifcation , boring bar - as per sl.no.64 of technical specifcation , inserts for boring tool - as per sl.no.64a of technical specifcation , insert screw- as per sl.no.64b of technical specifcation , torx-wrench - as per sl.no.64c of technical specifcation , boring bar - as per sl.no.65 of technical specifcation , inserts for boring bar- as per sl.no.65a of technical specifcation , shim _spares - as per sl.no.65b of technical specifcation , shim pin _spares - as per sl.no.65c of technical specifcation , lever _spares - as per sl.no.65d of technical specifcation , clamp screws _spares - as per //bid details 2 / 124 sl.no.65e of technical specifcation , turning tool - as per sl.no.

CTN :44949121

11 May, 2026 NA

Raipur - Chhattisgarh

Tender For supply of seam checking gauge , steamjacket kettle 50 litre double jacketed with indentin , sulphuring chamber 5 kg capacity made up of wooden stainless , vacuum bottle filling machine capacity , sealer for sealing of jars , perforated spoons , chisel cold flat , adjustable pipe die set , gauge telescopic set , interchangeable ratchet socket set , lathe tools hss tipped set , drill s s twist block , adjustable pipe chain tonge to take pipes up to 300 mm , hand reamer set flute nominal dia 6 8 10 12 16mm , hand shear universal , rheostat sliding type , ammeter mc analog portable , milli voltmeter centre , snip bent heavy duty , ammeter mc analog , ac ammeter mi , universal puller jaws adjustable , hammer ball peen , straight edge steel , stud e tractor , screw thread micrometer , ac energy meter , hydraulic jack , steel bucket r , dual magnetization , compressor , gauge snap , gps training platform channel 12 receiver , power distribution board , inside calliper , gauge plug single , frequency meter , drill twist straight shank set , drill twist taper shank set , anvil with stand , flat tongs , lu meter lu meter , steel scale , fruit mill junior model 1 hp motor , chisel cold flat carbon steel , swage block , hammer cross peen , anemometer , allen key , hammer ball peen , trolley type portable air compressor , otdr min display , smd soldering de soldering station , bamboo slicing machine , framimg square 24 steel , chisel cold flat 10 mm , tweezers bend tip , picka e , allen key set he agonal , soldering iron , file flat smooth , scrapper , milli ammeter ac , crown corking machine , precision set , sheet metal cutting pliers , dol starter 1 2 hp , scraper triangular 25 cm , steel square , oil stone , prick punch , hand reamers adjustable , spirit level , crimping tool pliers , hammer plastic , plastic feeler gauges , hand hammer , machine reamer parallel , hammer chipping , interchangeable driver set , scraper flat 25 cm , chisel 3 4 18mm , smps of different make , file half round 20 cm , drill chuck with key , lan tester type , center punch , file square , allen key alloy steel , tyre pressure gauge , hand drill manual operated , voltmeter , hand operated crimping , clamp meter 0 10 a , engineer s try square , cylinder liner dry , spanner double ended , chisel firmer , electric rice cooker , file triangular , chisel 1 2 , piston ring remover , planishing hammer , blow lamp 1 litre , spirit level metal 300 mm basic length accuracy 0 1mm meter , lcr meter digital , chisel mason hammer headed punch , spirit level 15 cm metal , punch letter 4mm , bearing puller inside , bearing puller outside , d firmer chisel , calipers (v2) (q3)

corporations/Associations/Others

CTN :44639454

10 Apr, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For corrigendum : auction sale of hardness tester,crane garage portable,v milling - bfw,bar straightening,milling vertical semi automatic,milling hand lever operated,hacksaw high speed,air cooled air compressor,spill/fine boring two spindle for barrel,electric pump and coolant service,circular table with power feed,precision surface grinder,precision centre lathe,hauser make jig grinding

Central Government/Public Sector

CTN :44633612

20 Apr, 2026 NA

Jodhpur - Rajasthan

Tender For supply, installation and commissioning of precision centre lathe machine as per attached annexure. [ warranty period: 30 months after the date of delivery ]

Cnc Lathe Trainer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector