Tender For supply of portable handheld digital gauss meter (tesla meter) to model no. d20b of m/s lab magnet orexactly equivalent, complete with probe, battery, carrying case, calibration certificate, warranty certificate,technical datasheet, and all standard accessories. specifications: 1) type : digital, 2) measurement : ac/dcmagnetic field, 3) range : up to 20,000 gauss, 4) resolution : 0.1 gauss, 5) accuracy : +/- 1.0% or better, 6) display : digital lcd, 7) probe : suitable for magnetic surface measurement, 8) power source : battery operated, 9) battery life : minimum 18 hours. note: the offer shall accompany the catalogue / brochure of theitem. [ warranty period: 12 months after the date of delivery ] ]
Tender For providing of design installation and maintenance of educational lab/centre - science lab; physics lab pg science biotechnology; buyer - digital storage oscilloscope , digital function generator ,hall effect measurement setup , four probe method , 8085 microprocessor trainer kit , 8086 microprocessor training kit , 8051 microcontroller training kit , superposition theorem trainer kit , thevenin's theorem trainer kit , maximum power transfer theorem trainer kit , digital ic tester m, amplitude modulation & demodulation ,
Tender For supply of hand held thermal imaging camera completewith 2 year warranty,technical requirement confirming to rdsoletter no.el/7.1.108/sbc/main dtd. 26/11/2024 and having irresolution: 160 x 120 pixels, digital image enhancement:yes,thermal sensitivity/netd:less than 70 mk, field of view (fov):71 degree x 56 degree , minimum focus distance: 0.3 m (0.98 ft),distance to spot ratio: 24:1, image frequency: 8.7 hz,focus:fixed, focal plane array/spectral range: uncooled microbolometer/7.5 to 14 micro mtr., detector pitch: 12 micro mtr,display resolution: 320 x 240 pixels, screen size: 2.4 inchportrait, color palettes: iron , rainbow, white hot, black hot,arctic, lava, image adjustment: automatic, image modes: msx(multi spectral dynamic imaging)visual with temperaturereading, object temperature range: -25 degree c to 380 degree c(-13 degree f to 716 degree f), measurement accuracy: -25degree c to 50 degree c (-13 degree f to 122 degree f): up toplus minus 3 degree c (plus minus 7 degree f) 50 to 100 degreec (122 to 212 degree f): plus minus 1.5 degree c (plus minus 3degree f) or plus minus 1.5% whichever is greater 100 degree cto 380 degree c (212 degree f to 716 degree f): plus minus 2.5degree c (plus minus 6 degree f) or plus minus 2.5% whicheveris greater, ir temperature resolution: 0.1 degree c (0.2 degreef), repeatability of reading: plus minus 1% of reading or plusminus 1 degree c (2 degree f), whichever is greater, responsetime: 150 ms, ir thermometer measurement: continuousscanning, minimum measurement distance: 0.26 m (0.85 ft),type-k range: included type-k probe: up to 260 degree c (500degree f), type-k accuracy: plus minus (1.0% + 3 degree c (7degree f)), spotmeter: center spot on/off, set-up commands:local adaptation of units, language, date, and time formatsscreen brightness (high, medium, low) gallery, deletion ofimages, emissivity correction: yes: 4 preset levels with customadjustment of 0.1?0.99, storage capacity on 4 gb card: 50,000images,image file format: jpeg w/ spot temp data, digitalcamera resolution: 2 mp (1600 x 1200 pixels), adapts to ir lens,flashlight: 100 lumens led, on/off option, class 1 laser: projectscenter spot and outlines circular measurement area to indicatesize, bluetooth: ble, usb: type-c: data transfer, power, batterytype: rechargeable 3.7 v li-ion battery, battery operating time: 5hrs scanning, battery charging time: 4 hrs, to 90%, powermanagement: adjustable: off, 5 min, 15 min, 30 min,shock/vibration: 25 g (iec 60068-2-27); 2 g (iec 60068-2-6),drop: designed for 2 m (6.56 ft), weight: 0.394 kg (13.9 oz),size (l x w x h): 210 x 64 x 81 mm (8.3 x2.5 x 3.2 in) make brand must be : flir-tg-268.269, bosch-gtc-400c, fluke-pti-120, testo &tipl only [ warranty period: 30 months after the date of delivery ] ]
Tender For supply of ring curette , gigli saw 50 cm , rib approximator small 16 cm , rib approximator big 18 cm , dura protector , soft tissue protector during rod insertion , spine probe , punja curette , micro needle holder , pedicle ball tip probe , crocodyle up , crocodyle straight , crocodyle down , up cutter size 1 mm , alexander periosteum elevator , head gauze measurement for bipolar , malleolar screws titanium 20mm , malleolar screws titanium 25mm , malleolar screws titanium 30 mm , gun saw dryer air adopter , stille osteotome straight 25mm of 20cm , stille osteotome straight 32 mm of 20cm , autoclave ss drum for bone mill
Tender For digital hand held lcr meter 4 1/2 digit (dual display) model no.916 with accessories kit including alligator clips, smd test probe, a usb cable & an ac adaptor. make : gw instek or m/s extech or scientific or its equivalent. specifications: 1) measurement parameters : l,c,r (ac/dc), d, q, esr, phase angle; 2 wire or 5 wire measurement. 2). testing mode : parallel / series ; sorting mode for quality control. 3) full scale : main display : 20,000 / 2,000 count selectable. sub display : 2,000 count. 4) freq: 100 hz, 120 hz, 1khz, 10khz & 100khz. 5) auto lcr mode : automatically identifies and measures the dut when the meter is switched on. 6) other functions : auto range, auto back light, max, min, data hold, zero, 46 segments analogue bar, auto power off. 7) display: lcd mono display. 8)interface : usb 9) power supply : 6 volts battery & optional power adopter. 10) low battery indication. the firm must supply proper calibration certificate(from nabl approved lab) with the instrument. [ warranty period: 30 months after the date of delivery] ]
Tender For procurement of lab equipments for mechanical engineering department. - procurement of lab equipments for mechanical engineering department., exhaust gas analyzer: portable 5 gas exhaust analyser for automotive lab use measurement of, co (0-10 %) co2 (0-20%) hc (0 20000 ppm) o2 (0-25%) nox (0 5000ppm) gas sampling rate 01 lit / min response time = 5 seconds warm up time =03 minutes display lcd input membrane keyboard operating temperature - 0- 50 degree celsius power consumption 25 w, operates on 230 v ac / battery supplied with sampling probe, filters, and carrying case, 3d printer: build volume (wxdxh) 256 x 256 x 256 mm * shell enclosed (plastic & glass) hot end all-metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm (optional) build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps time lapse supported filament run out sensor yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter, mitutoyo screw thread micrometer (0 -25 mm) mitutoyo screw thread micrometer 0 25 mm range; 0.001 mm accuracy; 0.005 mm/0.01 mm resolution; interchangeable anvils & spindle tips for multiple thread forms hardened measuring faces ratchet stop; calibration certificate protective case
Tender For supply of laboratory items - b-h loop tracer self-contained universal b-h curve tracer for ferromagnetic specimens of any shape; ic-probe-based flux density measurement; magnetizing coil with adjustable excitation; cro x-y output (10 mhz cro); operates on 230v ac digital conductivity meter lcd display: power supply-220-240v ac, 50hz, conductivity measuring range (ms/cm): 200, with conductivity cell