Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; electrical system or installation, tig torch of ac/dc welding power source; service provider
Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - 3x210 mw atps anpara sonebhadra up 231225; replacement of old and eroded expansion joints cleaning and welding of id and pa fan duct during oh of unit 2 of 3x210 mw anp..
Tender For repair and comprehensive maintenance of swimming pool plant and equipments fire fighting system at af stn nal under ge (af) nal - comprehensive annual maintenance of swimming pool comprises of the following equipments complete all as specified and directed.(a) pumping sets of capacity 3.5 hp - 05 nos (01 as standby) (b) pressure filter of filtering capacity 50 cum/hr - 04 nos (01 as standby)(c) dosing pump - 02 nos (one for chlorination and one for soda ash)(d) electrical panel board consisting of starters of suitable rating complete.note: rate quoted by the contractor shall deemed to be included for the following :-(i) contractor shall provide trained technician and a helper, who will visit swimming pool once in a week, to check and servicing of the equipments above to ensure the serviceability and proper functioning of swimming pool.(ii) grease and lubricating oil shall be provided by the contractor at his own end and nothing extra shall be payable on this account. (iii) cleaning all swimming pool building inside, plant room, equipments including surrounding area of the buildings. (iv) check serviceability of all self priming recirculation pump of single stage / horizontal self priming pump set of 3.5hp / 3.26 kw capacity and all other connected items., comprehensive annual maintenance of fire fighting system in sekhon hall , new tech flight, sre and new atc of the following equipments complete all as specified and directed.(a) main fire pump with centrifugal motor of existing capacity- 04 nos (b) jockey fire pump with electric motor of existing capacity - 04 nos (c) makeup fire pump- 04 nos(d) dg fire pump with engine - 04 nos note: rate quoted by the contractor shall deemed to be included for the following :-(i) contractor shall provide trained technician and a helper, who will visit fire fighting installation in sekhon hall , new tech flight and new atc once in a week, to check and servicing of the equipments above to ensure the serviceability and proper functioning of installation.(ii) grease and lubricating oil shall be provided by the contractor at his own end and nothing extra shall be payable on this account.(iii) cleaning all fire fighting installation buildings (sekhon hall , new tech flight and new atc) inside, plant room,equipments including surrounding area of the building. (iv) check serviceability of all self priming recirculation pump of single stage / horizontal self priming pump set of all existing capacity and all other connected items., s&f in repair pressure pump limit switch of capacity 1psi to 4 psi and 230 volt as per existing make and model fixed on pressure booster line complete all as specified and directed., supply, installation, testing and commissioning in repair of detectors complying with and type certified to en-45 addressable type multi sensor detector with heat and smoke combination with base with self built intelligence as per is:11360 (for annexes) complete all as specified and directed., supply, installation, testing and commissioning in repair of addressable manual call point / pill station resettable type with base complete all as specified and directed, supply, installation, testing and commissioning in repair of fire alarm sounder/siren electronic type horizontal single stage continuous type normal operation for atleast 50 minutes with sound level 65 db to 120 db measured at 1.5 mtr with sound output variation +5 db 500 mtr complete all as specified and directed, supply and fixing in repair addressable monitor module for activating the sirens complete all as specified and directed, taking out old unserviceable hose box by cutting and welding and s&f hose box made of 18 gauge ms sheet 800mmx 600 mm x 250 mm with double door with 4 mm thick glasses and door frame made of 16 gauge ms sheet for keeping 2 nos hose pipe of length 15 mtr each branch pipe nozzle coupling etc and painted fire red out side and brilliant white inside yard complete all as specified and directed., supply
Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; welding and repair works of hdpe, frp, and ppr pipelines of various sizes in the service water system, main and esp ac plant, and cw system; as per scope ..
Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - icgs c-428 icgs c-423 icgs c-146; h 016 03 nos stanchions deteriorated perished and uprooted from deck structure due to age wear and tear same to be replaced renewed as..,repair, maintenance, and installation of plant/ systems/equipments (version 2) - icgs c-428 icgs c-423 icgs c-146; h 017 port water jet net deteriorated perished due to age wear and tear fabrication and fitment of new waterjet guard to be carried ou..,repair, maintenance, and installation of plant/ systems/equipments (version 2) - icgs c-428 icgs c-423 icgs c-146; e 043 multiple pin holes observed in fire and gs pump discharge pipelines defect to be rectified by welding or renewal of pipelines le..,repair, maintenance, and installation of plant/ systems/equipments (version 2) - icgs c-428 icgs c-423 icgs c-146; h 012 02 in nos port side stanchion plates uprooted bent stanchion plates to be welded repaired material aluminium; service provider,repair, maintena
Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - bhilai nagar nigam area; replacement of 8 inch frp common slide height 1 point 2 m , area 0 point 5x2 point 4mwelding and fixing at site with all necessary fittings len..,repair, maintenance, and installation of plant/ systems/equipments (version 2) - bhilai nagar nigam area; gym equipments, replacement of swing patta fiber patta for swing length 1 point 75 ft breadth 1 ft height 200 mm properly holed for grip of ch..,repair, maintenance, and installation of plant/ systems/equipments (version 2) - bhilai nagar nigam area; replacement of see saw main frame pipe 60 or 90 mm pipe, length 3 mtr with support of 25x25x3 angle, with all necessary fittings, welding and ..,repair, maintenance, and installation of plant/ systems/equipments (version 2) - bhilai nagar nigam area; replacement of see saw patta 2 nos seat with tee, welding and fixing at site, see saw patta have to be properly molded in pipe length 300 mm hei..,repair, main
Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - c-401, m/s apsez, mundra; h 022 rubber mat on hmg lmg stand ladder foot mat of flag deck q deck and mess deck found deteriorated with anti skid rubber and secured with a..,repair, maintenance, and installation of plant/ systems/equipments (version 2) - e 058 lub oil was observed from sme turbocharged cartridge lubrication pipeline view pipeline rupture same to be repaired by welding and leakage to be arrested post repa..
Tender For corrigendum : repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; tender for the job of obtaining consent to establish for hter scheme at rcf thal unit through nipl route; as per scope of work; a) safety violation by contractor employee at work place: 1) working without wearing safety helmet (per person), 2) working without wearing safety shoes (per person), 3) working without wearing safety goggle &/or hand gloves during handling of hazardous chemicals, acid/alkali etc. (per person), 4) working without wearing safety belt (double lanyard full body harness) for height jobs above 2 meters. (per person), 5) working without wearing face shield during cutting, welding, grinding activity and during maintenance work on process lines and equipment. (per person), 6) not using ppe, tools/tackles as mentioned in safety work permit (per person), 7) working without valid test certificate for lifting tools/tackles (per incidence observation), 8) working without appropriate electric plug-pin, elcb/rccb/rcbo (per incidence observation), 9) working without a valid safety work permit (per incidence/ observation), 10) permit not available at site (per incidence/observation), 11) gas cylinder without flash back arrestor (per incidence observation), 12) gas cutting set with damaged hose pressure gauge without valve key (per incidence/observation), 13) gas cylinder without trolley (filled and empty) (per incidence/ observation), 14) unauthorized personal entering into cordon off area (per incidence/observation), 15) faulty wire/cable laying on ground or using snapped cables (per incidence/observation)., 16) improper hand tool or power tools (per incidence observation), 17) smoking at work place area. (per person), 18) found in intoxicated state (per person), 19) violation of road rules (per incidence observation), 20) b) safety violations by transport contractors, 21) faulty hazchem displayed on tanker (per incidence observation), 22) one pvc/tychem suit set if available (per incidence/ observation), 23) both pvc/tychem suit set are not available (per incidence observation), 24) fire extinguisher without hydro test. (per incidence/ observation), 25) trem card not available (per incidence/observation), 26) hazardous chemicals transportation training of driver by authorized agencies. (training card not available with driver) (per person), 27) lying/resting below the vehicle(per incidence/observation), 28) any other deviation found as per checklist for tankers (per incidence/ observation.
Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - industrial training institute; ac/dc tig weldingmachine with water cooled torch 300a argon regulator; service provider
Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - industrial training institute; tig weldingmachine set complete 300 amp ac/dc; service provider