Tender For providing electrification and street light (balance work) in sector-21 u/e kaithal. (including six years defect liability period for transformer and three years free maintenance and defect liability period for other items, free of cost) rate taken in dnit e
Tender For maint and repair of street lights security lights and solar lights and its connected items including repair to lt distribution network at mh and 41 arty div under ge mh and rh khadki - taking down old unserviceable lt ug cables of size upto 50 sq mm from trenches / poles / ducts etc complete all as specified and directed., supplying, laying, jointing, commissioning and testing xlpe insulated screened pvc bedded, armoured, heavy duty underground electric cable with stranded aluminium conductor 1100 volts grade confirming to is-7098 (part-i-1988) laid in trenches/ducts/wall / floor / pipes/ poles including cable glands and aluminium lugs of appropriate size, pvc sleeve etc complete all as directed by engr in -charge for following sizes . make :- polycab/havells / gloster / finolex note :- earth work , bricks , riddled earth , gi pipe for protection of cable will be measured & paid under relevant items of schdule . , 50 sq mm 3.5 core ., 35 sq mm 3.5 core, 25 sq mm 3.5 core, 16 sq mm 4 core., 10 sq mm 2 core, 6 sq mm 2 core, excavation in trenches not exceeding 1.5mtr wide and not exceeding 1.5mtr in depth for foundation of poles stays laying of electric cables, pipes etc and getting out in soft/loose soil complete all as specified and directed., ditto item no 3 but in hard/dense soil., removing excavated material soil to a distance not exceeding 50mtr and depositing where directed at a level not exceeding 1.5mtr above the starting point complete all as specified and directed, returning, filling in, including spreading, levelling watering and well ramming in layers not exceeding 25cm in soft/loose soil complete all as specified and directed., material and labour for riddled earth for cushioning to under ground electric cable including spreading , levelling and hand punning complete all as directed. note - punned thickness shall only be measured & paid ., material and labour for road cutting/foot path and making good with pcc 1:3:6 type c-2 ( using 40 mm graded stone aggregate ) of 150 mm depth complete all as specified and directed., supply and laying un-reinforced precast concrete cable cover lv, type i, flat, size 250mm x 150mm x 40mm for under ground cable all as specified and directed., supply and laying gi tubes light grade, galvanized, 40 mm bore in repair ,laid in trenches or under floor or fixed with poles/walls for protection of electric cable all as directed, ditto item no -10 but 80 mm bore., material and labour for plain cement concrete (pcc) 1:3:6 type c2 using 40mm graded stone aggregate for making foundation of pole/stay assembly complete all as specified and directed., material and labour for plain cement concrete (pcc) 1:3:6 type c1 using 20mm graded stone aggregate for making copings of poles etc complete all as specified and directed. ., material and labour for earthing complete with galvanised steel earth plate eletrode 600x600x6mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5mtr below normal ground level, connected to the earth lead wire 4.0 mm dia (gi wire) size, by means of bolts, nuts, check buts and washers of galvanised iron, earth lead wire 4.0 mm dia protected by provision of gi medium grade pipe 15 mm bore including provision of 40 mm thick cover of rcc (1:2:4) 20mm graded stone aggregate re-inforced with xpm (weight not less than 4 kg per sqm) and frame of angle iron 40x40x3 mm with lugs 02 nos and with 6 mm dia ms bar handle made to shape, gi light grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edged of earth plate, common salt and charcoal filling, funnel, wire mesh and earth work in hard/dense soil, returning filling in distance not exe 50 mtr and removal of surplas soil to plate no 3 of ssr 2009 part-i and connecting to earth test point all as specified or indicated including testing on completion complete all as specified and directed. , material and labour fo
Tender For procurement of electrical spare items for electrical estate, bel bangalore - procurement of electrical spare items, switch sp,5amps,flush mounting (bel part no.990110006826), universal socket 5a (bel part no.990110005759), capacitor 2.25mfd (bel part no. 990110511808), open dp switch 32a (bel part no.990010298004), electronic regulator (bel part no.990072007852), heating element for geyser 2 kw (bel part no.990174051270), immersion heating element (bel part no.990110134672), water heater element round type (bel part no.990010298974), water heater element oveltype (bel part no.990010298295), thermostat (bel part no.990010074031), rigid pvc conduit 1" (bel part no.990010000666), pvc pipe-3/4"(19mm)dia (bel part no.990072023178), gangway box 1way (bel part no.990110027972), exhaust fan 250mm plastic body (bel part no.990010265412), insulation tape (different colours) (bel part no.995010234008), bioline gel(petrolium gelly) (bel part no.990210001351), hylum sheet 2400mmx1200mmx3mm-white (bel part no.990010000903), pvc casing & caping 20mm white (bel part no.990110020891), pvc casing caping 1" (bel part no.990010000434), piercng connectrs,16-95sqmm(abc) (bel part no.990010000693), led bulb 7w warm light (bel part no.990010204787), 50w led flood light luminaire (bel part no.990010002082), 200w led flood light (bel part no.990010213032), street light led fitting, 150w (bel part no.990010000994), led post top light fitting 40w (bel part no.990010224284), 4 sq mm, pvc, multistrand, cu wire (bel part no.990010000736), 2.5 sqmm, pvc, multistrand cu wire (bel part no.990010000735), 1.5sqmm, pvc multistrand copper wire (bel part no.990010000271), twin flat 1sqmm 2core cable (bel part no.990010298101), 2.5 sq-mm - 3core cu- cable (bel part no.990010000125), cable al armoured 4core,10sqmm (bel part no.990110033210), cable aluminium,4 core,16sqmm (bel part no.990110033113), al.flat cable 2.5sqmm,twin cor (bel part no.990110077636), al 2x16sqmm abc 2core cable (bel part no.990010297907), heat shrinkable cable jointing straight (bel part no.990074009447), cable jointing kit for 25 sqm (bel part no.990074008865), 1.1kv heat shrk st.jt-kit-3.5gx50sqmm (bel part no.990010190722), 1.1kv heat shrk st.jt-kit-3.5gx95sqmm (bel part no.990010190916), 10a - switch (make-anchor roma). (bel part no.990072037534), metal cutting blades (bel part no.995010827066), hole saw cutter 18mm (bel part no.990310305230), hole saw cutter 25mm (bel part no. 990310305327), hole saw cutter 30mm dia (bel part no.990010197124), hole saw cutter 50mm dia (bel part no.990010197221), high speed steel drill bit set (bel part no.990210763345), flat spaner set (bel part no.995010290462), rong spaner set (bel part no.995010290559), smc junction box 240x130x110mm2 (bel part no.990010002046), smc meter box (bel part no.990410000115), smc meter box (bel part no.990010000290), air blower (bel part no.990210742490), hot air blower (bel part no.990010272202)
Tender For supply of electrical items d d - dr beck insulating varnish for motor , ceramic room heater rod 1000 watt , 2 core 1 5 sqmm copper workshop flexible cable polycab , pvc tape steelgrip , p t holder havells make , p t bulb 320 volt 100 wt prakash , led bulb 18 watt havells , smps power supply 24 volt d c 10 amp input voltage 220 volt , single phase prventor 220 volt , indicating light complete screw type 220 volt with bulb r y b g , digital volt meter size 4 x 4 0 600 volt , empire cloth size 3bata4 inch , l e d indicator voltage and current 60 500 volt 0 100 amp with c t , fan capacitor 2 mfd , fan capacitor 2 5 mfd , fan capacitor 3 5 mfd , fan capacitor 4 mfd , fan capacitor 6 mfd , bed switch 6 amp , bed switch 10 amp , pvc gulli 6 mm , pvc cable clip 8 m , pvc cable clip 6 m , gypsum screw 1 5 inch , plug top 16 amp 3 pin , plug top 5 amp 3 pin , led flood light 200 wt , led flood light 100 wt , led flood light 50 wt , led street light 30 wt , led street light 50 wt , led tube light 20 wt , led bulb 9 wt , led bulb 12 wt , led bulb 18 wt , pvc fan 5 hp for motor , pvc fan7 5 hp for motor , pvc fan 10 hp for motor , pvc fan 15 hp for motor , pvc fan 20 hp for motor , pvc fan 25 hp for motor , backelite kit kat size 32 amp , backelite kit kat size 63 amp , pvc single core copper wire 1 5 sq mm , pvc single core copper wire 2 5 sq mm , pvc single core copper wire 4 sq mm , pvc single core aluminium wire 1 5 sq mm , pvc flexible wire 23bata76 , 2 core 1 sq mm copper workshop flexible cable polycab , 3 core 1 5 sq mm copper workshop flexible cable polycab , crc 226 500ml pack , combined board 16 amp , wire break tester * /bid number : gem/2026/b/7601328 + /dated: 30-05-2026 ' ' / bid document 1 / 31
Tender For street light items - led bulb 15wat, led bulb 18wat, led bulb 23wat, led bulb 30wat, led bulb 40wat, led bulb 50wat, led street light 36 wat, led street light 50wat, pendent holder hd, alluminium wire 4.0sq mm, alluminium wire 4.0sq mm hd, aluminium wire 6.0sq mm, aluminium wire 10.0sq mm, alluminium wire 12.0sq mm, sv fitting 250 wat, sv chouke 250 wat, sv bulb 250 wat, sv ingnater 250 wat, sv condencer 250 wat, gi street light bend long 1 inch, gi street light bend long 1 .1/4 inch, gi street light bend long 1 .1/2 inch, connecter 2 way, connecter 3 way, connecter 4 way, connecter 5 way, connecter 6 way, dp switch 32 ampss, ic dp switch heavy duty 32 amps, tape roll pvc., copper wire 2.5 sq, copper wire 1.5 sq., copper wire 4.0 sq., copper wire 6.0 sq., street light poll clamp, sv poll clamp, sv gi bend hv, copper wire 1.0sqmm., copper wire 1.5 sq mm., copper wire 2.5 sq mm, led bulb 15wat hd, led street light 36 wat hd, led street light 50 wat hd, led street light 100 wats, led street light 45 wat hv, led street light 100 wats hv, led flood light 150 wat, led flood light 200 wat, pendent holder.