Latest coal auger machine Tenders | Government coal auger machine Tenders

State Government

CTN :45398731

09 Jun, 2026 NA

Hazaribag - Jharkhand

Tender For purchase/supply items of (non schedule items) and p and m (cs) (non schedule items) - "abstract for purchase/supply of non schedule items.stone boulder of size 150 mm and below at quarry", supply of quarried stone 150 - 200 mm size for hand broken at quarry, boulder with minimum size of 300 mm for pitching at quarry, gravel/quarry spall at quarry, gelatin 80% , jute netting, open weave, 2.5 cm square opening for seeding and mulching, random rubble stone, sand bags (cost of sand and empty cement bag), square rubble coursed stone, "stone bricks of size(i) 250 mm x 125 mm x 100 mmper thousand nos.", "(ii) 250 mm x 125 mm x 125 mmper thousand nos.", (i) g.i. wire (8 to 10 swg), (ii) black annealed (8 to 10 swg), "binding wire(i) annealled wire (20 to 25 gauge)", (ii) black annealed (20 to 25 gauge), expanded metal (18 gauge) 40 mm x 25 mm x 75 mm wide , "bituminastic board (for use as per expansion joint i.s.1838-1938 filter)(i) 25 mm thick", 150mm dia r.c.c.np2 perforated pipe , pressure release valve, (i) safety valve, (ii) pocket valve, "cost of burnt clay pipe of internal dia 31.70 mm (11/4"")externaldia 38 mm (11/2"")(i) 100 mm long", (ii) 225 mm long, fuse coil, bolts 20 mm dia 25 cm long, coal tar, nuts and bolts 16 mm dia375 mm long with washer etc, "palm leaves per 100 nos", check valve 38 mm dia., 38 mm dia. water hose 30m long, nx core bit 48 cts(imp), nx core bit 38 cts(imp), nx tc bit, bx tc bit, nx st reamer cell 6.5 cts(imp), bx st reamer cell 6.5 cts(imp), good quality wooden core box 3 metre long x 0.85 metre wide x0.15 metre deep with longitudinal compartment to accommodate 5 rows of 3 metre long cores i.e. total 15 metre, "abstract for p&m (cs) . (non schedule items)diesel truck (8.0 mt capacity )", air compressor (diesel operated) 325 cfm and 105 h.p, wagon drill machine including pump, jack hammer (52 lb), rotary diamond core drilling machine, sheep foot roller with d-4 tractor, diesel pump per 10 h.p., tipper (tata sk-1613 turbo bs ii tipper)

State Government

CTN :45303631

30 May, 2026 NA

Ranchi - Jharkhand

Tender For e quotation for none schedule item rate - diesel truck (8.0 mt capacity ), air compressor (diesel operated) 325 cfm and 105 h.p, wagon drill machine including pump, jack hammer (52 lb), rotary diamond core drilling machine, sheep foot roller with d-4 tractor, diesel pump per h.p., tipper (tata sk-1613 turbo bs ii tipper)

Central Government And Public Sector

CTN :45275329

05 Jun, 2026 62.77 Lacs

Kullu - Himachal Pradesh

Tender For carrying out of diamond core drilling in nx size in different formations at hurla trench weir site of parbati-h.e. project (stage-ii) (package no-c-871)

CTN :45222499

22 May, 2026 NA

Rajkot - Gujarat

Tender For arresting seepage in spillway block no 1 to 7 by hydraulic feed diamond core drilling & col grouting work at hiran-2 irrigation scheme.

Central Government/Public Sector

CTN :45196197

13 Jun, 2026 NA

Kolkata - West Bengal

Tender For supply of heavy drilling machine (pillar core) : electrical diamond core drill id: dia 200mm

State Government

CTN :45187621

15 Jun, 2026 3.08 Crore

Somnath - Gujarat

Tender For arresting seepage in spillway block no 1 to 7 by hydraulic feed diamond core drilling and col grouting work at hiran-2 irrigation scheme.

CTN :44345613

30 Apr, 2026 3.5 Thousand

Bengaluru - Karnataka

Tender For corrigendum : procurement of machinery and equipment - inside caliper (divider)150, machine .brushes., bench. brushes., file,brushes., hacksaw .frame fixed 300mm., needle .file set., knurling .tool straight & diamond cut., hss .centre drill dia 8 mm., hss .centre drill dia 3.0 mm., hss .counter sink bit 120 degree., hss die .m4 - m12 with die stock., hss drill bit .straight shank dia 3 to 12 mm (step of 0.5 mm) (set)., goose neck .clamp set., strap .clamp set., machine .vice 150 mm (drilling)., self centering drill chuck 12 .mm., bench .grinder., dia .indicator - 0.01mm with styallus (needle type)., radius .gauge from 7.5 -15mm., thread .pitch gauge metric & inches., surface .plate granite 600 x 600 x 80 mm with stand., number .punch 5 mm set., pillar drilling. machine., cnc .simulators., outside .caliper (divider) 150, hammer .cross peen 0.75 kg with handle, flat .chisel, hss hand .hacksaw blade 18 tpi, magnetic .v block, rotary .table, sleeves .mt 3, sleeves .mt 2, sleeves .mt 1, materail .handling equipment, feeler .gauge 0.05 to 1.0 mm, radius .gauge upto 7mm, vernier .bevel protractor, universal .magnetic dial stand, outside .micrometre 25-50 mm, outside .micrometre 0-25 mm, dial .vernier 150 (0.02 lc), digital .vernier 0 - 150 mm, vernier .caliper 0 - 200 mm, vernier .caliper 0 -150 mm, vernier .height gauge 300 mm, center .punch, scriberr, try .square 4 inch blade, divider .spring type -150 mm, cnc cylindrical grinding machine., tool presetter , hydraulic vice - l- 525 x w- 108 x 135mm , opend 175mm, lathe dog carrier - bent tail 2 , lathe dog carrier - straight tail 2 , inserts type shell end mill dia 63mm with inserts (30nos.) 3 box., solid carbide end mill four flute dia 12mm , solid carbide end mill four flute dia 10mm , solid carbide end mill four flute dia 8mm , solid carbide end mill four flute dia 6mm , solid carbide end mill four flute dia 5mm , solid carbide end mill four flute dia 4mm , ball peen hammer 250 gms & 500 gms, warding file smooth 6 , knife edge file smooth 6 , knife edge file smooth 8 , knife edge file second cut 6 , knife edge file second cut 8 , knife edge file second cut 10 , half round file smooth 6 , half round file smooth 10 , half round file second cut 6 , half round file second cut 10 , half round file second cut 12 , half round file bastard 12 , round file smooth 6 , round file smooth 10 , round file second cut 6 , round file second cut 8 , round file second cut 10 , round file second cut 12 , round file bastard 12 , triangular file smooth 6 , triangular file smooth 8 , triangular file second cut 6 , triangular file second cut 8 , triangular file second cut 10 , triangular file bastard 10 , square file smooth 6 , square file smooth 8 , square file second cut 6 , square file second cut 8 , square file second cut 10 , square file bastard 12 , hand file second cut file 10 , flat file rough 12 , flat file smooth 8 , flat file smooth 10 , flat file second cut 8 , flat file second cut 10 , flat file second cut 12 , flat file bastard 12 , convex milling cutter dia 63 x 6 radius x bore size dia 27 mm., concave milling cutter dia 63 x 6 radius x bore size dia 27 mm., t slot cutter with parallel shank dia 17.5x8mm width shank dia 8mm, hss parallel shank end mill dia 16 four flute, hss parallel shank end mill dia 12, hss parallel shank end mill dia 10, hss parallel shank end mill dia 8, hss parallel shank end mill dia 6, hss tool bit 1 x 1 x 6 - 8% cobolt, hss tool bit 3/4 x 3/4 x 6 - 8% cobolt, hss tool bit 1/2 x 1/2 x 6 - 8% cobolt, hss tool bit 1/4 x 1/4 x 6 - 8% cobolt, flat slab oil stone 25 x 52 x 150 mm, hss centre drill dia 4.0 mm, hss machine reamer ( straight shank)dia 6 - 10 mm., hss hand reamer with wrench - dia 6 - 10 mm, power hacksaw machine with blade (10nos.)., hss tap set for size m4 - m12 with wrench (set) & core drills for the above tap set, taper shank hss drill dia 20mm, taper shank hss drill dia 16mm, taper shank hss drill dia 14mm, clamp c 10 , clamp c 5 , too

Central Government/Public Sector

CTN :44641395

08 Apr, 2026 NA

Raigad - Maharashtra

Tender For supply of lab equipment - "sieve shaker-gyratory-for 20/30 & 45cm dia sieves with digital timer, , sieve shaker carries upto 7 sieves of 450mm diameter in single adaptor. supplied without sieves or lidpan. detailed specification as follows:, calibration from nabl lab shall be included", "sieve shaker-gyratory-for 20 & 30cm dia sieves with digital timer-, sieve shaker carries upto 7 sieves of 200 / 300 mm diameter in single adaptor. supplied without sieves or lidpan. detailed specification as follows:, calibration from nabl lab shall be included", "sieve shaker-gyratory-for 20cm dia sieves with digital timer, sieve shaker carries upto 7 sieves of 200mm diameter in single adaptor. supplied without sieves or lidpan. detailed specification as follows:, calibration from nabl lab shall be included", "pavement core drilling machine with petrol engine - 5.5 hp and 100mm dia core drill bit, the machine is primarily intended to drill out core samples from the asphalt or concrete road, suitable for vertical drilling only. detailed specification as mention in following page. supplied with 100 mm dia x 450 mm / 400 mm core drill bit. ", "core drill bit 65 mm, 70 mm , 100mm and 150 mm dia x 450mm with barrel - v,, with portable pump / portable submersible pump", "core cutting machine - 150 mm dia core -with accessories , rock/stone/concrete cube or cylinder cutting and grinding machine, with 450mm dia diamond impregnated cutting wheel, suitable to cut up to 150mm depth. equipped with 2 hp three phase electric motor, starter. floor standing model. water tank of 25 ltr. below machine level.", "bitumen extractor - motorised with variable speed with digital rpm indicator, special model with ac motor and drive : this model facilitates precise speed control and vibration free smooth operation. speed variation up to 3600 rpm. complies with following international standards - astm d 2172, aashto t 58, t 164. , calibration from nabl lab shall be included", "buoyancy balance with electronic balance - 15 kg x 0.1 gm, for water absorption and specific gravity test of aggregates. with density basket, water tight cylinder and electronic balance of 15 kg x 0.1 gm sensitivity. the balance will be with under hook weighing arrangement and will be mounted on suitable table to facilitate the test. the water tight container will be mounted on a mechanical jack, which will facilitate the updown movement of the container for weight in air and water. as per en 12390-7, bs 1881:114, is:2386 (part iii) , calibration from nabl lab shall be included", "rebar locator - profometer pm8000, profometer pm8000 - portable concrete rebar locator - the latest generation 2023 product release by screening eagle switzerland, under its value brand proceq, is the most powerful & precise instrument for inspection of concrete for locating reinforcement bars, their position, spacing, cover & diameter of rebar, fully wireless designed for use in rough environments. profometer pm 8000 with i pad basic model", "reaction container - is 2386 (part vii),, as per is:2386 -part vii (fig.5), made of stainless steel, 50 to 75 ml. capacity, fitted with air tight cover.", "refractory furnace-9"" x 4"" x 4""-1200c,, light weight with ceramic wool insulation. the outer casing made of thick mild steel sheets painted attractively. heating chamber consist of grooved refractory bricks in which heating elements are inserted in coil form and are easily replaceable. temperature controlled by dual display microprocessor based digital temperature indicator cum controller with k type sensor. compensating cable etc.working on 230 v. max. temperature: 1200 c. & working temp.: 1150 c. detailed specification as follows:, calibration from nabl lab shall be included", "chloride meter for fresh concrete (germann instrument make), the chloride meter has the best performance to quickly and accurately measure the chloride ion concentration contained in raw concrete/aggregate. all equipment required

CTN :44556235

08 Apr, 2026 NA

Bhubaneswar - Odisha

Tender For diamond core drilling & allied exploration work in 7 (seven) different mineral blocks of odisha

Coal Auger Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government And Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector