Latest coal handling machine scrap Tenders | Government coal handling machine scrap Tenders

State Government

CTN :45466096

15 Jun, 2026 30.00 Lacs

Siwana - Rajasthan

Tender For annual rate contract for provding new water service connection with material under division siwana - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement fo

CTN :45468027

19 Jun, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of floor trap of 75mm dia with grating , pvc swr gully trap of size 110mm dia , pvc pipe 100mm bore 20ft long , pvc swr 110 mm dia pipe with three socket , stainless steel storage racks , stainless steel serving platform , stainless steel vegetable cutting table , preparation table , deep freezer of 200 ltr capacity , grill cage , chula , dining table , dining chair , synthetic enamal paint dark brown 4ltr pack , synthetic enamal paint og 4ltr pack , thinner , painting brush 50mm , painting brush 100mm , painting brush 125 mm , cement base paint weather proof , gi plate 600mm x 600mmx 6mm thick , ci cover of size 290 x 290 x 6 mm , glpipe 40 mm dia medium grade 04 m , gi strip of size 25 x4 mm 08 m , salt , ms funnel with wire mesh 01 no , gi pipe 20mm dia med grade , gi reducer 40 x 20 mm isi marked , ms rod 6 mm dia 2 long , charcoal dust , 5 mm dia 30 mm long gi bolt with nut , air termination single pointed copper rod 12mm dia and 300mm long , gi pipe 100mm dia 2 m lomg medium grade with base plate , back fill compound , ci manhole cover of size 30cm x 30 cm with handles , aluminium strip 25 x 3 mm , gi strip 32 x 6 mm rm 03 , insulator for fixing down conductors as per relevent is 25 nos , vitrified floor coloured tiles , anti skid coloured floor tiles , perforated type gypsum board false ceiling panel , kota stone flooring 25 mm thick , mild steel chromium plated 25 mm dia and 3mm thickness drapery rod , integral water proofing compound , white or coloured cement to match the floor finishes surface , fire extingusher one kg capacity , drill bits 3 mm size , drill bits 6 mm size , drill bits 8 mm size , drill bits 10 mm size , drill machine high speed heavy duty qty , hacksaw frame with 5 bladeboth side teeth , screw driver blade length 300 mm, blade dia 6 mm qty , hammer , magnetic nut setter of size 8mm , parthal wooden planks for shuttering , circular tile cuting machine with 5 blade , panel steel cuting dimond blade , aluminium planer for mason , brick trowel , brick hammer , insulated plair side cutting 250 mm , measuring tape 30 mtr long , water level pipe l equal to 20 mtr qty , bonding adhesive , mild steel material handling trolley

Central Government/Public Sector

CTN :45450535

18 Jun, 2026 25.00 Lacs

Sonbhadra - Uttar Pradesh

Tender For name of the work / . contract no: - scope of work/technical specifications etc.1. up keeping, cleaning work of 88.8 sqm area (22.20 sqm area/day/machine) of machine housing, operator cabin, undercarriage track chain and rollers mud etc. of 04 nos. hydraulic shovels (be700, tata hitachi zx650h sl no.001166 and pc2000-8 sl no.1 & 2) working at khadia project for a period of 365days.2. material handling of lubricants barrels, loading and unloading of 04 nos. hydraulic shovels (be700, tata hitachi zx650h sl no.001166 and pc2000-8 sl no.1 & 2) and 02 nos. surface miners working at khadia project for a period of 365days. 3. assistance in repair and maintenance work in all the three shifts including general shift of 02 nos. surface miners, running under marc. note: maximum deployment of manpower for the above scope of work likely to be 1. semi-skilled for 730 nos. of manshift & un-skilled for 2555 nos. of manshifts.standard terms & conditions- all the safety materials (safety helmet, safety shoes, gloves and other safety equipment s) are to be provided / arranged by the contractor., labour charges for material handling & cleaning works of hydraulic shovels and surface miners as per scope of work including contractor profit., labour charges for assstance in maintenance and repair work of 02 nos surface miners running under marc including contractor profit., total impact of gst for the purpose of ctc

CTN :45448080

26 Jun, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of provn of prefabricated store shelter , pvc insulated cable copper conductor 1 point 5 sqmm in 90 mtr roll , pvc insulated cable copper conductor 2 point 5 sqmm single core in roll , pvc insulated cable aluminium conductor 6 sqmm , flexible wire 23 oblique 76 copper conductor , pvc casing capping 25 mm wide 2m long , ms screws 6mm x 19 mm , ms screws 4mm x 19 mm , ms screws 6mm x 40 mm , switch piano type 6 amp , switch and socket combination 5 pin 5 amp with pvc gang box , switch and socket combination 15 amp 5 pin with pvc gang box , main switch 32 amps obelique 240 volt dp , mcb 6 amp sp , mcb 10 amp sp , mcb 32 amp dp , angle holder , led bulb 14 w , led tube light fittings of 20w strip batten fittings complete , ceiling fan complete with blades , bulk head fitting of 18 watt with complete accessories , fr electrical insulation tape , ceiling rose 6 amp pilot 02 plate , change over switch double pole 32 amp , mcb box 6 way spn , rectangular wooden switch board with hylam sheet on top , pvc round block , exhaust fan 450 mm sweep , pvc switch board 6 points , earthing set complete , prefabricated gel earthing electrode of pipe in pipe technology , air termination single pointed copper rod 12mm dia and 300mm long , gi pipe 100mm dia 2 m long medium grade with base plate , back fill compound , ci manhole cover of size 30cm x 30 cm with handles , aluminium strip 25 x 3 mm , gi strip 32 x 6 mm , insulator for fixing down conductors , integral water proofing compound , synthetic enamel paint white colour 1st quality , synthetic enamel paint og colour 1st quality , synthetic enamel paint brown colour 1st quality , red oxide zinc chromate primer for metal surfaces , wooden primer white colour , taurpentine oil , oil bound distemper in off white colour , weather coat exterior emulsion , panting brush 50 mm size , mild steel chromium plated 25mm dia and 3mm thickness , fan hook made of 12 mm ms round bar to be hanged from purlin , ms binding wire 0 point 90mm dia , texture finished gypsum board false ceiling panel , chair office cushion , office table steel , steel racks , pvc chair with arms , mild steel dunnage , de spanner set size all type , hand gloves leather streatcheable with wollen inner first quality , brick trowel steel , mortar pan steel , measuring tape 15m long steel , shoval with plastic handle and plastic d grip and carbon steel blade , axes picks 3 kgs for digging with wooden handle , plier cutting 200mm for barbed wire , mild steel material handling trolley of size 1200mm x 600mm x 300mm , mild steel semi automatic portable concrete vibrator needle , portable concrete mixture machine

CTN :45433484

17 Jun, 2026 NA

East Sikkim - Sikkim

Tender For providing of hiring of earth moving equipments, material handling equipments and cranes (per hour basis) - as per buyer's requirement; mining machine; heavy duty spm rock drill (dc-400)

CTN :45433516

16 Jun, 2026 NA

East Sikkim - Sikkim

Tender For providing of hiring of earth moving equipments, material handling equipments and cranes (per hour basis) - as per buyer's requirement; mining machine; heavy duty spm rock drill (dc-400)

corporations/Associations/Others

CTN :45224195

06 Jun, 2026 NA

Donimalai - Karnataka

Tender For corrigendum : providing of hiring of earth moving equipments, material handling equipments and cranes (per hour basis) - as per buyer's requirement; mining machine; as per nit

State Government

CTN :45249557

29 May, 2026 50.00 Lacs

Balotara - Rajasthan

Tender For annual rate contract for providing new water service connection with material under division balotra - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement

Central Government/Public Sector

CTN :45064002

23 May, 2026 NA

Ranga Reddy-T - Telangana

Tender For supply of ring spanners set , allen keys long ball point set (1.5 to 10 mm) , allen keys long ball point set (1/16 to 3/8 inches) , hand oil pump , grease gun (lever type) , bucket grease pump with trolley , hydraulic bottle jack 2 ton , hydraulic bottle jack 3 ton , hydraulic bottle jack 5 ton , hydraulic bottle jack 10 ton , bench vice with fixed base , needle files set 140 mm , needle files set 160 mm , drill driver , billet level /spirit level , torpedo level/ spirit level , combination spanner set , shallow offset ring spanner set crv , adjustable wrench 8" , adjustable wrench 12" , long nose plier 6" , long nose plier 8" , plier circlip external (bent) , plier circlip internal (bent) , plier circlip straight external , plier circlip straight internal , curved lock plier mat handle , straight jaw locking plier , slotted screw driver , pipe wrench , hacksaw frame with blade , sledge hammer with wood handle , bearing pullers , line testers , small angle grinder(4 inch) , blower , heavy duty heat gun , welding helmet , mixed tools set , 3 in 1 mobile tools storage box , handheld torch light , polyster webbing sling lifting belt for crane hoist material handling. , combination spanner set (inches) , torque wrench ( 5 to 25 n-m) , torque wrench ( 10 to 50 n-m) , impact drill machine , pipe wrench 450 mm-18" , 1/4 inch sq. drive socket set 6 pt met , oxygen acetylene torch kit (used 13 1 for welding, brazing and cutting) , 1/2 drive pear head ratchet set metric , double open end spanner set

corporations/Associations/Others

CTN :45033657

20 May, 2026 35.17 Lacs

Jhansi - Uttar Pradesh

Tender For providing of m & r of 2x110 mw and 2x210 mw ash dykes at ptpp, parichha. - carriage of cmr/ash by mechanical transport including loading, unloading and stacking upto 5 km distance from power house area to ash ponds at ptpp parichha. payment to be made after deducting voids as per cpwd specfication or as decided by engineer in charge. , earth/ash work in excavation in earth over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m; disposed earth to be levelled and neatly dressed , placing of precast rcc planks in decantation well including its carrige and putting it into slott including all labour t&p etc. required for proper completion of work. , providing and laying empty cement plastic bags filling the same with ash having capacity of 50kg and stiching the same with sutali, laying with ash pond area as per instruction of engineer incharge. , engaging jcb/hydra machine on hire bases including hire fuel driver helper etc. complete. , dry stone pitching 22.5/30 cm thick including supply of stones and preparing surface filling from fly ash with watering & compection complete including carriage from coal handling area.(boulder free of cost from chd area in plant) , spreading of cmr/ash/earth by opening of stack including dressing watering compaction/ramming etc. complete for proper completion of work as per direction of engineer in charge of the work. payment to be made on compacted quantity. , clearing jungle including uprooting of rank vegetation, grass, brush wood,trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared , brick work with fly ash bricks f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:6 (1 cement : 6 coarse sand) , cement plaster (in fine sand) 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , formation of dyke/ roads using approved materials including the preparation of borrow area,stripping, watering of borrow area, excavation of approved quality of material from borrow area,using poclains or any other mechanical means,loading, unloading, transporting by dumpers,trucks etc., surface watering / dewatering,lowering of water level to at least 0.5 m belowthe bottom of the working level, includingconstruction of cofferdams wherever required,depositing the fill material on the dyke,spreading by dozers or grader in layers notexceeding 30 cm in compacted thickness forforming the embankment with all leads, lifts,breaking clods, watering, compaction with min. 10tone capacity vibratory rollers or pneumatictyred rollers to achieve a dry density not lessthan 95% of maximum dry density (standardproctor) forming extra width on edges, trimmingof slopes and slope compaction with dozers orslope compactors to obtain the section as perconstruction drawings, with all incidental charges, cost of labour, equipment, materialsetc. complete as per specifications, drawings and as directed by the engineer. with ash available from inside ash dyke area , structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. , same as above item but steel shall be issued by department free of cost ( steel issued by department) , steel reinforcement for r.c.c. work including straightening, cutting, bendin g, placing in position and binding all complete for thermo-mechanically treated bars

Coal Handling Machine Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

corporations/Associations/Others

State Government

Central Government/Public Sector

corporations/Associations/Others