Latest coating materials Tenders | Government coating materials Tenders

corporations/Associations/Others

CTN :45386360

08 Jun, 2026 4.67 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in various parks of sector 20,chandigaarh under ward development fund. - providing and fixing of chest press double size / dimensions length -1200 milimeter width- 700 milimeter height 1800 milimeter maximum weight -120 kilogram material:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions. colour:- green paint finish- power coated, uv resistant paint coating thickness (min) 100 micrometer warranty 3 years. complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge. , providing and fixing of leg press leg shaper complete in all respects having following specifications. a) all pipes should used in the equipments should be galvanised with 3mm thickness. b) multi colour powder coating with polyster paints should be used on all the equipments. c) the foot pedal on all the equipments should be of aluminium only. d) the seats should be made of high quality plastic with colour scheme in yellow or orange. e) the high end bearings such as skf/nbc must be used in all the equipments. 1 dimensions- 1730*450*1450mm 2 colour- customizable multi colour and complete powder coat 3 size of main tube-114*3.75mm steel pipe 4 size of supporting tube-76*3mm steel pipe 5 there is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck. 6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater 7 anti-skid components are used at the pedal parts. 8 the distance between two spinners is no less than 230mm, avoiding the damage of being stuck 9 anti theft cover is made by stainless steel/high quality plastic. 10 thickness of bearing bracket is no less than8mm 11 hazardous materials like coating agent, rubber are under national newest standard. functions: develops the strength of lower limbs, and improves the stability and agility of three main joints of lower limbs; good for the healing of inconvenience of bending and stretching of lower limbs, and muscular atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone, etc. approaches: sit on the chair and step on the footboard. stretching legs with force and recover slowly. repeat. users: suitable for people of different ages. complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge. , providing and fixing of parallel bars size/dimensions length- 900 millimeter height 800 millimeter material:- all the pipes shall be galvanized iron (gi) and isi marked to ensure s

Central Government / Public Sector

CTN :45396862

15 Jun, 2026 NA

Kazipet - Telangana

Tender For manufacturing and supply of single piece spring inserted reusable seize nut for size m-25 lock nut m 025. dimensional requirement of the nut shall be as under (as per irs/t-23) and generic specifications (provisional) for self-locking nuts to be used in bolts for track fittings. basic material of the nut shall be of steel conforming to chemical composition, mechanical and physical properties mentioned in is-1367 part-06 or equivalent standards ensuring the performance requirements of indian railways as mentioned in this document with materials electro galvanizing or hot-dip galvanizing or nickel alloy coating etc. tenderer must enclose as per din 65151-dynamic testing of the locking characteristics of fasteners under transverse loading conditions (vibration test) or nas3350(national aerospacestandard)- vibration test requirements for high quality, self-locking nuts, used at temperatures up to 800 degrees f or iso 7481:2000 aerospace -nuts, self-locking, with maximum operating temperature less than or equal to 425 degrees c. brinell hardness of the nut shall be 139-287 hbw (as per sub-clause 9.1 of is 1367 part-6)along with tender. pitch screw threads for check rails of isejs and fish plated joints of cms crossings 28 & 25 mm pitch in 3 mm . [warranty period: 60 months after the date of delivery ] [ warranty period: 60 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45390699

05 Jun, 2026 NA

Dibrugarh - Assam

Tender For supply of hex head bolt m20x100 high tensile. materials and specification as per is:1364 (part -1)- 2002, ce with property class 10.9 to is: 1367 (part -3)-2002 coating as per mdts-057 make:-tvs/tuff/dfl/unbrako and all approved vendors for axle end steel high tensile cap screws to be used in end holes of bg freight axles ( item id-3100249, sub item id 3100249002 or 3100249003) borne in the rdso approved vendor list available on uvam portal. [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45390700

05 Jun, 2026 NA

Dibrugarh - Assam

Tender For supply of hex head bolt m12x55 high tensile. materials and specification as per is:1364 (part -1)-2002, ce with property class 10.9 to is: 1367 (part -3)-2002 coating as per mdts-057 make:-tvs/tuff/dfl/unbrako and all approved vendors for axle end steel high tensile cap screws to be used in end holes of bg freight axles ( item id-3100249, sub item id 3100249002 or 3100249003) borne in the rdso approved vendor list available on uvam portal. [ warranty period: 30 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45117828

15 Jun, 2026 NA

Kazipet - Telangana

Tender For corrigendum : manufacturing and supply of single piece spring inserted reusable seize nut for size m-25 lock nut m 025. dimensional requirement of the nut shall be as under (as per irs/t-23) and generic specifications (provisional) for self-locking nuts to be used in bolts for track fittings. basic material of the nut shall be of steel conforming to chemical composition, mechanical and physical properties mentioned in is-1367 part-06 or equivalent standards ensuring the performance requirements of indian railways as mentioned in this document with materials electro galvanizing or hot-dip galvanizing or nickel alloy coating etc. tenderer must enclose as per din 65151-dynamic testing of the locking characteristics of fasteners under transverse loading conditions (vibration test) or nas3350(national aerospacestandard)- vibration test requirements for high quality, self-locking nuts, used at temperatures up to 800 degrees f or iso 7481:2000 aerospace -nuts, self-locking, with maximum operating temperature less than or equal to 425 degrees c. brinell hardness of the nut shall be 139-287 hbw (as per sub-clause 9.1 of is 1367 part-6)along with tender. pitch screw threads for check rails of isejs and fish plated joints of cms crossings 28 & 25 mm pitch in 3 mm . [warranty period: 60 months after the date of delivery ]

corporations/Associations/Others

CTN :45346453

09 Jun, 2026 29.95 Lacs

Coimbatore - Tamil Nadu

Tender For improvement works and supplying of kitchen accessories to the amma unavagam at poo market , mettupalayam road in ward no.72 of west zone. - earth work excavation of building in kind of soilsand sup soilsand full depth as may be directed by the departmental officers with initial lift and leads and cleaning and leveling the site., cement concrete 1:4:8(one cement,four sand and eight aggregate) using 40mm gauge hand broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted, supplying and erection shuttering,including necessary supports for plain in all floors using mild steel sheets of size 90x 60 cms and bg 10 stiffed with surfacewelded mild steel angles for boarding supported by casuarina props at suitable intervals etc. completecomplying with standard specifications as directed, for plinth beam, for lintel beam slab, for vertical walls, cement concrete 1:1.5:3 (one cement,one and half sand and three aggregate)using 20mm gauge hard broken granite stone jelly for all rcc items of work excluding centring, shutteringand cost of reinforcement grill but including fixing fan clamps and fixtures in rcc works wherever necessary as per the direction of departmental officers complete, cement concrete 1:2:4 (one cement, two sand and four aggregate ) using 20mm hard broken granite stone jelly for all pcc items of work etc., complete fixturas directed by departmental officer ., supplying,fixing and placing in position mild steel /ribbed torsteel rods for all rcc works including cost of steel and binding wire also in all floors,complete complying with standard specifications(upto 16mmdia rods), fly ash brick work in cm 1:4 (one cement & four sand) using size 9"x4 3/8"x2 3/4" including finishing,curing,etc., complete complyingwith standard specification., plastering with cement mortar 1:3 (one cement and three sand) 12mm thick in all floors including cost and conveyance of all materials to site etc,complete as per standard specifications, plastering with cement mortar 1:5 (one cement and five sand) 12mm thick in all floors including cost and conveyance of all materials to site etc,complete as per standard specifications, finishing the floor with 20mm cement concrete ( ellis pattern rst sort - no sand to be used) etc complete as directed., supplying, fabricating, erecting structural steel work for roofing welded or bolted type using ms channels, angles, plates and roundbars etc. conforming to is specification including primer coating and enamal painting as per design given by the departmental officers etc, complete as per standard specification., supplying and roofing with pplg sheet of selected colour fixed to required profile inclusive of brackets and screw arrangements etc.,complete, supplying and erecting pull and push type rolling shutter with i.s.i. make of approved size and section using 18 gauge g.i.sheet with manually operated type. the shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc, complete as per standard specification., supply of man hole cover and frame is 12592 including fixing etc. extra heavy duty circular (228kg) 600 mm dia, supplying and fixing in position cement based hydrualically pressed anti skid tiles (pattern design) 20mm thick in cement mortar 1:3 (one part of cement and three part of plastering sand (p-sand)), 20mm thick and pointed with same colour of cement etc., complete as per standard specification, dadooing the walls with first quality approved coloured glazed tiles of size 150x150x6mm laid in cement motar 1:2 mix to 10mm thick and pointing with white cement using 0.40kg per sqm including finiching the joints and surface etc., complete, flooring finishing with first quality ceramic tiles of all colours of size 305cm x 305cm x 6mm laid in cement motar1:3 mix to 20mm thick and painting with cement paint using 0.3kg 1m2 including finishing the joi

CTN :45321977

01 Jun, 2026 8.30 Lacs

Palwal - Haryana

Tender For supply and testing of equipments for testing of samples in developements work in mc palwal. - supply of digital compression testing machine (capacity 2000kn), supply of slump cone testing apparatus frustum-shaped metallic cone with specific dimensions, a tamping rod, and a base plate with powder coating, core cutting machine electrical heavy-duty tool that uses an electric motor and a diamond-tipped drill bit to create clean, precise holes in materials like concrete, asphalt, and brick, auto level sokkia b-40a with accessories, its durable, high-precision optical instrument for surveying and construction, featuring an automatic compensator for accurate leveling despite vibrations and a robust, water-resistant body, rebound hammer manual make- gsi, sieve gsb frame 30cm dia x 45mm, sieve gsb frame 30cm dia x 40mm, sieve gsb frame 30cm dia x 37.5mm, sieve gsb frame 30cm dia x 31.5mm, sieve gsb frame 30cm dia x 26.5mm, sieve gsb frame 30cm dia x 25mm, sieve gsb frame 30cm dia x 20mm, sieve gsb frame 30cm dia x 19mm, sieve gsb frame 30cm dia x 16mm, sieve gsb frame 30cm dia x 14mm, sieve gsb frame 30cm dia x 10mm, sieve gsb frame 30cm dia x 9.5mm, sieve gsb frame 30cm dia x 8mm, sieve gsb frame 30cm dia x 5.0mm, sieve gsb frame 30cm dia x 4.00mm, sieve gsb frame 30cm dia x 3.35mm, sieve gsbframe 30cm dia x 2.0mm, wbm, trowel with a short handle and a flat metal part used in building for spreading cement, plump bob - brass it`s a weight, typically made of solid, durable brass, with a pointed tip at the end of a string, head pan, line level / torpedo level tapered level with vials for horizontal, vertical, and 45 measurements, hammer 2 kg, hammer 5 kg, hammer 10 kg, hoe with a long wooden handle, drill machine bosch, measuring box, screw diver set-taparia, wrench set, elco meter used for inspection equipment, primarily for measuring the thickness and profile of coatings on various substrates like metal and concrete, digital vernier calipers digital display to show measurements of internal and external dimensions, right angle ( both), pick axe, digital thermometer, sample bag (3 pack of 25 pcs), is code, testing manuals, mug, buckets, roadometer metric measuring wheel, bosch digital measuring tape, 30 meter tape measuring tape, 50 meter tape measuring tape

CTN :45330058

02 Jun, 2026 35.67 Lacs

Silvassa - Gujarat

Tender For procurement of furniture for new phc at naroli in ut of dnh. - providing & fixing 3 seater sofa: dimensions w x h x d (cm)- 175 x 83.5 x 80finish color - brownseat height (cm) - 46.5upholstery material - fabricwarranty - 1 year warrantyprimary material - fabricaesthetically pleasing, mid-back designer backrest with tufts and clean stitching. rounded armrests with soft foam seating provide ergonomic comfort. easy-to-clean synthetic leather or fabric for the cool touch and feel., providing & fixing 2 seater sofa: dimensions w x h x d (cm)- 127.5 x 83.5 x 80finish color - brownseat height (cm) - 46.5upholstery material - fabricwarranty - 1 year warrantyprimary material - fabricaesthetically pleasing, mid-back designer backrest with tufts and clean stitching. rounded armrests with soft foam seating provide ergonomic comfort. easy-to-clean synthetic leather or fabric for the cool touch and feel., providing & fixing living room center table: diante coffee table hg mdf afy -diante coffee tablel x w x h 1100 x 600 x 463table-top 18mm thick hmrd board in afyon marbleplt 18 mm thick in black inkconfiguration shelf storage + concealed storag, providing & fixing living room side table: vegas table - 450d - 520h made with precision in urban design, the vegas corner table is a piece of art that can make any space come alive. its bright colour will enliven any interior. place it amongst monotones or other brightlycoloured furniture. the luxurious smooth finish of the base is made of fibre glass reinforced plastic. tempered glass top is stronger and more durable than regular glass, making it a safer choice for interiors. . this petite table can withstand a weight of up to 20kgs., providing & fixing living room tv unit :"overall size:height - 550 mm x width - 1504.0 mm x depth - 450.0 mmmaterial:all the carcass body panels are made of 18 mm thick prelaminated particle boarden312, e1 grade in wood grain shades, with all theedges edge-banded with 0.8 mm. thick pvc lipping.carcass back panel & drawer bottom panels are made of 9mm thick prelaminatedparticle board of en312, e1 grade.door and drawer fronts are made of 18 mm thick, prelaminated particle boarden312, e1 grade in solid shade, with all the edges, edge-banded with 0.8 mm. thickpvc lipping.the bottom leveler frame and legs of the unit are made of 25x25x1.2 and 38x1.2erw tube as per is 7138, with powder coating finish.hardware: high quality hardware used like hinges, roller slides, cam fasteners,dowels, levelers", providing & fixing pooja room mandir: mandir size:length 1180 mm x depth 240 mm x height 1700 mm, kitchen dimensions:providing & fixing kitchen shuttersshutter material shall be 13 mm thick bwp/bwr grade plywood.lamination shall be done on both sides of the shutter with 1.0 mm thick exterior-grade. provide all required hardware fittings (hinges, screws, accessories, etc.) shall be included.fixing of shutters shall be done as per manufacturer s specifications and site requirements.dimensions:4750 mm x 1662 mmarea:85 sq.ft, providing & fixing dining table: dimensions w x h x d (cm) - 175 x 77 x 89.9primary material - rosewood (sheesham)finish color - dark brownnet weight (kg) - 45warranty - 1 yeardelivery condition - knock downstyle - contemporary & modern"overall size :dining chair :length : 45cm width : 45cm height : 95cmcushion seat : length : 45cm width : 45cm height : 50cm ", providing & fixing bed:overall size : length : 206cm width : 190.5cm bed height : 42cm bed with headboard height : 100.8cmbed -metal frame materials & dimensions:(gauge +/-0.1mm): m.s pipe 20x20 (square pipe), 30x5 (draw strip), 25x6 (draw strip), 20x5(draw strip), 8mm draw rnd sariya, 12mm draw rnd pipe. decoration materials & specifications: (density / type) 25mm softy foam, fevicol, 3 ply thermacol, 21x31 poly bag, etc, aventura mat 78 72 5 - 1981.2 l 1828.8w the aventura mattress has a plush euro-top surface with extra cushioning for a truly lavish sl

Central Government And Public Sector

CTN :45336928

02 Jun, 2026 NA

Dibrugarh - Assam

Tender For supply of hex head screw m16x45 high tensile materials and specification as per is:1364(part-2)-2002,ce-with property class- 10.9 to is:1367(part-3)-2002, coating as per mdts-057, packing instruction - pi042 make:-tvs/tuff/dfl/unbrako and all approved vendors for axle end steel high tensile cap screws to be used in end holes of bg freight axles ( item id-3100249, sub item id 3100249002 or 3100249003) borne in the rdso approved vendor list available on uvam portal. [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45336929

02 Jun, 2026 NA

Dibrugarh - Assam

Tender For supply of hex head screw m24x100 high tensile. materials and specification as per is:1364 (part -2)- 2002, ce with property class 10.9 to is: 1367 (part -3)-2002 coating as per mdts-057 packing instruction-pi042 make:-tvs/tuff/dfl/unbrako and all approved vendors for axle end steel high tensile cap screws to be used in end holes of bg freight axles ( item id-3100249, sub item id 3100249002 or 3100249003) borne in the rdso approved vendor list available on uvam portal. [ warranty period: 30 months after the date of delivery ] ]

Coating Materials Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors