Latest coating Tenders | Government coating Tenders

State Government

CTN :40558066

20 Jun, 2025 NA

Cachar - Assam

Tender For supply of enamel, synthetic, exterior (a) under coating (b) finishing paint (v3) confirming to is 2932 (q3) , thinner for cellulose nitrate based paints and lacquers (q3)

CTN :40559070

12 Jun, 2025 NA

Bareilly - Uttar Pradesh

Tender For supply of manual metal arc welding electrode, dia: 4mm, class e2, type of coating: heavy, confo rming to spec. no. irs: m-28/2020, code %u2018e55bg1ni26%u2019 as per is:1395-2003. [ warran ty period: 30 months after the date of delivery ]

CTN :40557746

10 Jun, 2025 NA

Bathinda - Punjab

Tender For supply of enamel, synthetic, exterior (a) under coating (b) finishing paint (v3) confirming to is 2932 (q3) , gum spirit of turpentine oil as per is 533 (q3)

CTN :40521848

09 Jun, 2025 NA

Delhi - Delhi

Tender For repair, maintenance, and installation of plant/ systems/equipments (version 2) - office space; supply installation commissioning of equipments and devices for storage; buyer-providing compactors made out of 0.8mm thick crca steel conforming to is: 513 gr. d each unit have 4 loading levels formed by 3 nos . adjustable shelves . body units are bolted to under carriage . optimizer height form ground is 2080 mm (1980 body + 65 undercarriage +35 channel system) the body i /c shelves are given antirust surface treatment & are powder coated with epoxy polyester powder. it involves treatment consisting of hot water rinse. knock of degreasing, cold-water rinse, phosphating ,cold water rinse , passivation & dry off oven treatment. final finish consists of epoxy polyester powder coating of approved color & shade with a dry film thickness of minimum 40 microns . the testing of paint is done for various physical & chemical properties as per is: 101. the material is the oven backed with a controlled temperature of 180 deg. c . to 200 deg . c. it is made of 0.8 mm thick crca steel conforming is is : 513 gr . d or dd its max load bearing capacity is 80 kg uniformly distributed per shelves are mounted on support bracket & shelf level can be adjusted at approx. 25.4 pitch . there are 3 adjustable shelves per body given per body given 4 loading levels , if bi cradle pair is provided the under carrying is a welded frame made of hr sheet 3.15 mm thick conforming to is : 10748 suitably fabricated to take the loads based on configuration . a centralized locking arrangement is provided through locking stiffener mounted on to back of single last unit so that it gets locked on channels when all the units are brought together. 10 bodies.

CTN :40539425

20 Jun, 2025 NA

Kanchrapara - West Bengal

Tender For supply of manual metal arc welding electrode size 3.15mm x 450 mm, class d, type of coating: heavy conforming to irs m:28-2020. code er 4211x as per is:814-2004. make/brand: d&h secheron, corothe rme-spl or similar. [ warranty period: 30 months after the date of delivery ]

CTN :40534672

24 Jun, 2025 NA

Delhi - Delhi

Tender For procurement of spares for rafale aircraft - cloth,glass, hardener,enamel, hardener,adhesive, sealing and marking compound, gloves,mens, plastic bag, towel,paper, prussian blue paste , bearing surface, boric acid, anti-static bag, glycerol, petrolatum,liquid,technical, primer coating, coating compound,nonslip, coating compound,nonslip, surfacer,liquid, lacquer, polyurethane coating, lacquer, lacquer, paint, rubber, cutting fluid, grease, general purpose, remover,paint, desiccant container , dehumidifier, cartridge,dehydrator, cartridge,dehydrator, cloth,glass, potassium dichromate,technical:c, metal conditioning compound, coating compound,oxide black, deck covering underlay aggregate, sealing compound, grain,abrasive, impression inspection compound , surf, pumice,technical, solder,tin alloy, floor oil, hardener hv998-1, hardener,adhesive, biocide,fuel additive, cloth,abrasive, adhesive, sealing compound, antiseize compound, lubricant,solid film, grease,general purpose, enamel, enamel, tag,marker, insulation blanket,thermal, insulation blanket,thermal, adhesion promoter/nuclass:2g302, preservative coating,rubber, sealing compound, sealing compound, sealing compound, parting compound, sealing compound, dispenser kit,wedging materials, barrier material,water vaporproofed, soap,saddle, hp quick disconnect (hose), remover,paint, barrier material, waterproofed, flexi, cleaning cloth, tape,antiseizing, barrier material water vaporproofed, adhesive, inspection penetrant

CTN :40541729

19 Jun, 2025 NA

Jamnagar - Gujarat

Tender For supply of furniture for laboratory - raw water (flexible tubing service valves for benchtop aeolus fumehood) (rhs) , compressed air (flexible tubing service valves for benchtop aeolus fumehood) (rhs) , nitrogen (flexible tubing service valves for benchtop aeolus fumehood) (rhs) , ceiling panel , ceiling front cover panel for 5 feet aeolus fumehood , ceiling lh/ rh side cover panel for aeolus fumehood , understorage , fixed type apparatus storage cabinet for bench top enhanced fume hood (750 width) , rear support panel offixed type apparatus storage cabinet for benchtop aeolus fumehood , supply and installation of laboratory exhaust including supporting structures/hardwares including delivery, unloading the consignment and transporting it from the place of storage to the installation site, removal of debris, dirt and rubbish accumulated as a result of installation/commissioning of the same for analytical lab as per direction of engineer in charge : - , centrifugal blower & accessories , centrifugal fan with housing in pp construction & suitable stand in ms zinc plating with powder coating. inlet/outlet dia: 350mm. impeller dia: 400mm. non flp motor: 2 hp 1400 rpm. minimum cfm: 1000 @ 50 wcmm static pressure. motor make : ie2 (non flp), crompton greaves/bharat bijlee or equivalent. db level: 75. motor description: ip55, 3 phase, 440 volt , 50 hz. weather cover for motor. anti-vibration pads & m10x100 pin type anchor fasteners , blower weather cowl (frp outlet) & ms stack support with required clamps , 10 (250mm) 100% injection molded pp damper with two side flange , pp/frp ducting & accessories for fume hood & spot extractor exhaust , design, supply & installation of pp-frp ducting of wall thickness 3mm ppgl + 3mm frp for sizes up to 500mm dia, above 501mm dia 4mm ppgl + 4 mm frp shall be used unless otherwise specified. including clamps, hanging support, all hardwares required to complete ducting work. , ducting upto 500mm dia - wall thickness shall be 3 mm for pp and frp.

CTN :34651498

02 Jun, 2025 2.19 Crore

Delhi - Delhi

Tender For bid to ras bid to ras bid to ras bid to ras supply of long guiding sheath for radial access with id point 088inches with hvdrophilic coating,long guiding sheath for radial access with id point 088inches with hvdrophilic coating,long guiding sheath for radial access with id point 088inches with hvdrophilic coating,long guiding sheath for radial access with id point 088inches with hvdrophilic coating,long guiding sheath for radial access with id point 088inches with hvdrophilic coating,long guiding sheath for radial access with id point 088inches with hvdrophilic coating,long guiding sheath for radial access with id point 088inches with hvdrophilic coating,long guiding sheath for radial access with id point 088inches with hvdrophilic coating,long guiding sheath for radial access with id point 088inches with hvdrophilic coating,long guiding sheath for radial access with id point 088inches with hvdrophilic coating,long guiding sheath for radial access with id point 088inches with hvdrophilic coating,long guiding sheath for radial access with id point 088inches with

CTN :40540517

20 Jun, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For refurbishment of office area for static test facility - customised office table 18ftx30inchx30inch with 18ftx30inchx30inch under table storage , anti static medium back chairs , customised working bench of 16ftx24inchx30inch inches , customised storage cabinet made of 18mm plywood and 1mm laminate 48inchx24inchx18inch , customised office table with 26ft or 20ftx24inchx30inch with 26ft or 20ftx24inchx24inch under table storage made of 18mm plywood and 1mm laminatemade of 18mm plywood and 1mm laminate , customised metallic working bench 48inchx24inchx24inch with 24inchx24inchx18inch vice runner , ss alloy storage cabinet 72inchx36inchx24inch customized with safety locker , customised metallic working bench 48inchx24inchx24inch with 24inchx24inchx18inch vice runner heavy duty with wheels lockable , work bench with vice with wheels for portability , customized executive desk 72inchx36inchx30inch with wiring cabinet and 24inchx24inchx20inch under table cabinet and side runner 48inchx24inchx24inch , sofa 3 seater three seater cushion seater with leatherette finish , sofa 1 seater single seater cushion seater with leatherette finish , portable podium with inbuilt pa system , side centre table 24inchx18inchx18inch with melamine finish , customized center table with melamine finish and glass top 36inchx18inchx24inch , customised book shelf with 18mm plywood and 1mm laminette , magazine stand , rustrum wooden podium 48inchx24inchx24inch with internal storage and display top with glass cover , working table for operator 36inchx24inchx18inch , customized center table with melamine finish and glass top 30inchx24inchx18inch , key chest , customised filing cabinet 30inchx24inchx18inch made of 18mm plywood and 1mm laminate , customized three seater sofa with leatherette finish , corner table 24inchx24inchx18inch , corner table with glass top 12inchx18inchx18inch , 03 layer magazine shelf for magazine and newspaper , 72inchx24inchx12mm mirror with dept crest at bottom and optic light and laminate border , customized workstation of 30inchx24inchx24inch made of 18mm plywood and 1mm laminate and storage 18inchx18inchx30inch , operator chair with low back and no wheels , jacket and umbrella stand with 06 hangers each , storage cabinet 72inchx48inchx18inch mode of 18mm plywood and 1mm laminate with locking facility , reception table 24inchx30inchx30inch with under table storage made of 18mm plywood and 1mm laminate and dept crest in front with lockable storage , display board 48inchx36inch with pin up board separations , sofa 2 seater two seater cushion seater with leatherette finish , all weather round table 48inch with fibre top and pvc coating , all weather chairs with pvc coating , storage cabinet 36inchx24inchx30inch made up of 18mm plywood and 1mm laminate with modular drawers and sliding setup , stools customized portable seaters , cctv monitoring station 48inchx36inchx30inch made of 18mm plywood and 1mm laminate with under table storage 48inchx18inchx24inch , mobile locker 48 set , customised ss alloy storage cabinet 72inchx12inchx18inch with seperators for shoes and cloth hanging with mini locker , 16 helmet rack with mirror , heavy duty equipment rack 25ftx10ft with four floor metal shelves and movable base

CTN :40522640

19 Jun, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For supply of phosphoric acid based derusting & descaling chemical used through dip application for cast steel/cas , phosphating chemical ici phosdine-40 (code no. 62-040) /phoschem 203 for phosphate coating as per spe

Coating Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government