Latest coats Tenders | Government coats Tenders

CTN :41024731

29 Jul, 2025 1.89 Lacs

Bagepalli - Karnataka

Tender For specification and application of the push cart conforming to indian standard is 2431 1963 iatest for singale wheel type wheel baeeow is 4184 1967 latest for two wheels type wheel barrow no product isi markedno cml number na nominal capacity of push cart 240 liters material used for manu facture rear wheel material type of chasssis frame sigle length of steel tube of 25 mm nominal bore any other suitable steel section, such as flat of size 25 x 3 mm, angle channel section of equivalent strength, suitably bent to form a support for the wheel and the body. ms with solid rubber type ms with solid rubber type front wheel material front wheel hdpe type minimum diameter of the axle/spindle 26 millimeter minimum nominal width of type 32 millimeterminimum diameter of the wheel301 millimeter number of partitions in bins for segregation 2 thickess of each partition 24.5 millimeter provision of rear side door to unload waste with handle and lock provision yes minimum diameter of front wheel 201 millimeter size of ball bearing 6205 25mm x 52 mm x15mm type of bearing/ bush double ball bearing finish of metal parts two coats of black bituminous paint conforming to is 158-latest gavanised other finish finish other two coats of black bituminous paint and gavanised na purchase of 03 wheel push cart for door to door collection with 04 bins of ltr capacity each

State Government

CTN :41037637

17 Jul, 2025 NA

Halol - Gujarat

Tender For purchase advertised tender for supply of duck back, bill win or its equivalent make rain coats for line staff & other eligible employee of bodeli (o&m) division office

Central Government/Public Sector

CTN :41019167

16 Jul, 2025 NA

Harnaut - Bihar

Tender For supply of ink silk chrome gloss navy blue close match to isc 106 to is:5/2007 coats sc 08208.ma ke-dic india ltd or similar(with 01 ltr container). [ warranty period: 30 months after the date of deli very ]

State Government

CTN :41021977

15 Jul, 2025 2.00 Lacs

Shimla - Himachal Pradesh

Tender For supply of superior quality rain coats, complete in all respect, as per tender specifications

State Government

CTN :40995617

15 Jul, 2025 2.00 Lacs

Shimla - Himachal Pradesh

Tender For supply of superior quality rain coats, complete in all respect, as per tender specifications

State Government

CTN :40995618

15 Jul, 2025 2.00 Lacs

Shimla - Himachal Pradesh

Tender For supply of superior quality rain coats, complete in all respect, as per tender specifications

State Government

CTN :40995619

15 Jul, 2025 2.00 Lacs

Shimla - Himachal Pradesh

Tender For supply of superior quality rain coats, complete in all respect, as per tender specifications

Central Government/Public Sector

CTN :40330618

14 Jul, 2025 1.00 Lacs

Delhi - Delhi

Tender For corrigendum : supply of poplin 4 colour each 4cream etc , muslin , over lock thread 10000mtr , three ply thread cone 10000mtr black and white , thread 400mtr tube madura coats mix colour , hot melt brand bemis , seam reinforcement tape knit brand bemis , pattern making sheet , measuring tap , paper cutting scissor , bead leads pin , paper foam micro dot

Central Government/Public Sector

CTN :40773560

16 Jul, 2025 20.00 Lacs

Poonch - Jammu And Kashmir

Tender For corrigendum : repair of furniture for units in aor of stn hq bg under ge 881 ews - almirah large steel fd-351,339, 1031, removing unsv shelves of almirah large steel and s&f new shelves made out of 1 mm thick ms sheet with suitable clips/brackets/gas welding (if any) complete all as specified and directed by engr-in-charge., removing unsv foot rest of almirah large steel and s&f of new foot rest made out of 1.6mm thick ms sheet with continuous gas welding complete all as specified and directed by engr-in -charge., removing unsv lock of almirah large steel and s&f of new lock of six lever with duplicate key with suitable nuts and bolts all as specified and directed by engr-in-charge. make godrej/harrison/link, removing of unserviceable handle of almirah large steel and s&f of new steel handle 150mm long with suitable steel nuts and bolts complete all as specified and directed by engineer-in-charge., removing of unserviceable locking device of almirah large steel, s&f of new three way locking device (chakra/locking rod and locking cover) made out of ms round bar 10mm dia all as specified and directed by engineer-in-charge., removing of unserviceable key plate of almirah large steel, s&f of new key plate all as specified and shown on drg., welding per 5 cm wherever necessary, all as specified and directed by engineer-in-charge., m & l for two coats of synthetic enamel paint (1st grade quality shade/colour shall be approved by engineer-in-charge) including denting and painting of almirah steel large throughout inside and outside complete with spray machine after properly smoothing the surface all as directed by engineer in-charge., almirah med steel (fd-243, 340, 1032), removing unsv shelves of almirah med steel, s&f of new shelves made out of 1 mm thick ms sheet with suitable clips/ brackets/gas welddng (any one) all as specified and directed by engr-in-charge., removing unsv foot rest of almirah med steel, s&f of new foot rest made out 1.6mm thick ms sheet with continuos gas welding all as spcified in and directed by engr-in-charge., removing unsv lock of almirah med steel, s&f of new lock of six lever with duplicate key with suitable nuts and bolts all as specified and directed by engr-in-charge. make - godrej/harrison/link, removing of unserviceable handle of almirah med steel, s&f of new steel handle 150mm long with suitable steel nuts and bolts all as specified and directed by engineer-in-charge., removing of unserviceable locking device of almirah large steel, s&f of new three way locking device (chakra/locking rod and locking cover) made out of ms bar round 10mm dia all as specified and directed by engineer-in- charge., removing of unservicable key plate of almirah med steel, s&f of new key plate all as specified and shown on drg., welding per 5 cm wherever necessary, all as specified and directed by engineer-in-charge., m & l for two coat of synthetic enamel paint (1st grade quality shade/colour shall be approved by engineer-in-charge) including denting and painting of almirah steel medium throughout insided outside complete with spray machine after proper smoothing the surface all as directed by engineer in-charge., locker bed side steel (fd-1029), removing of old unsv hasp and staples of locker bed side steel and s&f of new ms hasp and staples as specified in drg and approved by the engr- in- charge., removing of old unsv conduit pipe of locker bed side steel and s&f of new cp steel 16mm dia 22 guage conduit hanging pipe all as specified and directed by engineer-in- charge., removing of old unsv handle of locker bed side steel and s&f of new cp steel handle 150 mm long as approved by engineer-in- charge., removing of old unsv hinges of locker bed side steel and s&f of new ms hinges 75mm long as approved by engineer-in- charge., removing of old unsv foot rest of locker bed side steel and s&f new foot rest made out of 1.6 mm thick ms sheet with co

corporations/Associations/Others

CTN :40832526

18 Jul, 2025 NA

Nagapattinam - Tamil Nadu

Tender For corrigendum : charges for painting top surfaces of the air intake system duct with epoxy primer paint and two coats of enamel paint at kuttalam gtps

Coats Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors