Latest coco peat Tenders | Government coco peat Tenders

Central Government/Public Sector

CTN :45675432

06 Jul, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - scrap ferrous condemned icf and lhb ac/non ac bogie frame and cut pcs of icf and lhb bogie frame with or without components of sorts and sizes, bogie bolster and lower spring beam arrangement. qty- 90 mt. lot will be sold as is where is basis. note:- 1) loose brake cylinder and loose safety wire rope will not be delivered. 2) bogie components like loose rubber items, loose fibre brake blocks/pads, pvc bushes, brake beam, brake calipers, brake pipe, dampers, check valves, hanger, anchor link, axle box housing and ferrous components of icf/lhb bogie found in lot will be dlivered. 3) loading by purchaser. 4) cutting not allowed. 5) delivery not allowed against part payment. 6) neglegible non ferrous attached with bogie frame/cut pcs of bogie frame found in lot will be delivered. location- lying at between line no. 2 and ward e-14.

State Government

CTN :45666676

14 Jul, 2026 NA

Bangalore - Karnataka

Tender For supply of annual supply and delivery of provision items for the institute (ihm) and its attached executive dev - aam panna syrup, acetone, acid, acid strong can, ada, aer pocket, agar agar, ajino moto, ajjawain, almond, almond flour, almond milk, candy, alphonsa mango puree pulp, aluminium foil (fresh wrapp)18 micron, aluminum foil, amchur powder, american mustard powder, american sweet corn, american us mustard sauce, amonium bicorbonate powder, amonium nitrate, vermicilli, antiseptic liquid, apple cidar vinegar, apricot (dry), artificial colour (rangoli colours dry), atta aashirvaad*, almond biscuit, baking powder, baking soda, balloons multi colour (small), balloons multi colour (big), bansi suji (rava), barbeque sauce, cake gel, cake improver gel, cake mould 1kg capacity, cake mould 500g capacity, dark chocolate (callebaut) *, milk chocolate (callebaut) *, ruby chocolate (callebaut), white chocolate (callebaut) *, camphor, candels (medium size), candid cherries, candid peel, candies mint, canister (kayser)*, canned tuna, caramel liquid colour, caramel syrup (hershey's), caraway seeds, carboxymethylcellulose (cmc) powder, cardamom, carom seeds, castor sugar, caustic soda, chinese cooking wine vinegar, chana dal, chana masala, charoli seeds, pista biscuits, chat masala, cheddar cheese (amul)*, cheese block (amul)*, cheese slice (amul), cheese tin (amul), chef cap (paper), cherry tin, chicken masala, chilli sauce chings, chiroti suji (rava), choco chips (morde) *, choco flakes (morde), choco flakes (kelloges)*, cloth washing bar soap, cloth washing powder, cloth washing powder sachet (rs.2/-), cloves, coca powder, cola/ carbonated drinks, cola/carbonated drinks, coco peat, coconut husk, coconut milk (dabur) *, coconut milk, coconut oil, coconut powder (maggi) *, coffee cups disposable ripple paper cups, colin glass & surface cleaner, colour balls, condensed milk (milkmaid)*, cooking dairy cream (amul), cooking fresh cream, cooking soda, coriander powder, coriander seeds, corn flakes, corn flour, cotton roll big, cranberry sauce with pulp, cream cheese, creamer (dairy whitener) sachets, creamer (dairy whitener), cumin, cumin powder, agarbatti, dal makhani masala, dark chocolate d55 (morde) *, dark chocolate (morde), dark compound (morde) *, dates dry (lion)*, dates wet (lion) *, deepam oil, degreaser powder sachets, demerara sugar

CTN :45433831

25 Jun, 2026 5.16 Crore

Pune - Maharashtra

Tender For corrigendum : supply of ndr ib switch-un-managed , splitter cable , twin port transceiver , passive fibre cable , any other components , any other charges , installation commissioning testing etc

corporations/Associations/Others

CTN :45624244

26 Jun, 2026 4.67 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in various parks of sector 20,chandigaarh under ward development fund. - providing and fixing of chest press double size / dimensions length -1200 milimeterwidth- 700 milimeterheight 1800 milimetermaximum weight -120 kilogrammaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions.colour:- green paint finish- power coated, uv resistantpaint coating thickness (min) 100 micrometerwarranty 3 years.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of leg press leg shaper complete in all respects having following specifications.a) all pipes should used in the equipments should be galvanised with 3mm thickness.b) multi colour powder coating with polyster paints should be used on all the equipments.c) the foot pedal on all the equipments should be of aluminium only.d) the seats should be made of high quality plastic with colour scheme in yellow or orange.e) the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1730*450*1450mm2 colour- customizable multi colour and complete powder coat3 size of main tube-114*3.75mm steel pipe4 size of supporting tube-76*3mm steel pipe5 there is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck.6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater7 anti-skid components are used at the pedal parts.8 the distance between two spinners is no less than 230mm, avoiding the damage of being stuck9 anti theft cover is made by stainless steel/high quality plastic.10 thickness of bearing bracket is no less than8mm11 hazardous materials like coating agent, rubber are under national newest standard.functions: develops the strength of lower limbs, and improves the stability and agility of three main joints of lower limbs; good for the healing of inconvenience of bending and stretching of lower limbs, and muscular atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone, etc. approaches: sit on the chair and step on the footboard. stretching legs with force and recover slowly. repeat. users: suitable for people of different ages.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of parallel bars size/dimensionslength- 900 millimeterheight 800 millimetermaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength and durability. the ver

corporations/Associations/Others

CTN :45490050

16 Jun, 2026 4.67 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in various parks of sector 20,chandigaarh under ward development fund. - providing and fixing of chest press double size / dimensions length -1200 milimeterwidth- 700 milimeterheight 1800 milimetermaximum weight -120 kilogrammaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions.colour:- green paint finish- power coated, uv resistantpaint coating thickness (min) 100 micrometerwarranty 3 years.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of leg press leg shaper complete in all respects having following specifications.a) all pipes should used in the equipments should be galvanised with 3mm thickness.b) multi colour powder coating with polyster paints should be used on all the equipments.c) the foot pedal on all the equipments should be of aluminium only.d) the seats should be made of high quality plastic with colour scheme in yellow or orange.e) the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1730*450*1450mm2 colour- customizable multi colour and complete powder coat3 size of main tube-114*3.75mm steel pipe4 size of supporting tube-76*3mm steel pipe5 there is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck.6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater7 anti-skid components are used at the pedal parts.8 the distance between two spinners is no less than 230mm, avoiding the damage of being stuck9 anti theft cover is made by stainless steel/high quality plastic.10 thickness of bearing bracket is no less than8mm11 hazardous materials like coating agent, rubber are under national newest standard.functions: develops the strength of lower limbs, and improves the stability and agility of three main joints of lower limbs; good for the healing of inconvenience of bending and stretching of lower limbs, and muscular atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone, etc. approaches: sit on the chair and step on the footboard. stretching legs with force and recover slowly. repeat. users: suitable for people of different ages.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of parallel bars size/dimensionslength- 900 millimeterheight 800 millimetermaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength and durability. the ver

corporations/Associations/Others

CTN :45386360

08 Jun, 2026 4.67 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in various parks of sector 20,chandigaarh under ward development fund. - providing and fixing of chest press double size / dimensions length -1200 milimeter width- 700 milimeter height 1800 milimeter maximum weight -120 kilogram material:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions. colour:- green paint finish- power coated, uv resistant paint coating thickness (min) 100 micrometer warranty 3 years. complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge. , providing and fixing of leg press leg shaper complete in all respects having following specifications. a) all pipes should used in the equipments should be galvanised with 3mm thickness. b) multi colour powder coating with polyster paints should be used on all the equipments. c) the foot pedal on all the equipments should be of aluminium only. d) the seats should be made of high quality plastic with colour scheme in yellow or orange. e) the high end bearings such as skf/nbc must be used in all the equipments. 1 dimensions- 1730*450*1450mm 2 colour- customizable multi colour and complete powder coat 3 size of main tube-114*3.75mm steel pipe 4 size of supporting tube-76*3mm steel pipe 5 there is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck. 6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater 7 anti-skid components are used at the pedal parts. 8 the distance between two spinners is no less than 230mm, avoiding the damage of being stuck 9 anti theft cover is made by stainless steel/high quality plastic. 10 thickness of bearing bracket is no less than8mm 11 hazardous materials like coating agent, rubber are under national newest standard. functions: develops the strength of lower limbs, and improves the stability and agility of three main joints of lower limbs; good for the healing of inconvenience of bending and stretching of lower limbs, and muscular atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone, etc. approaches: sit on the chair and step on the footboard. stretching legs with force and recover slowly. repeat. users: suitable for people of different ages. complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge. , providing and fixing of parallel bars size/dimensions length- 900 millimeter height 800 millimeter material:- all the pipes shall be galvanized iron (gi) and isi marked to ensure s

corporations/Associations/Others

CTN :45277495

28 May, 2026 4.67 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in various parks of sector 20,chandigaarh under ward development fund. - providing and fixing of chest press double size / dimensions length -1200 milimeterwidth- 700 milimeterheight 1800 milimetermaximum weight -120 kilogrammaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions.colour:- green paint finish- power coated, uv resistantpaint coating thickness (min) 100 micrometerwarranty 3 years.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of leg press leg shaper complete in all respects having following specifications.a) all pipes should used in the equipments should be galvanised with 3mm thickness.b) multi colour powder coating with polyster paints should be used on all the equipments.c) the foot pedal on all the equipments should be of aluminium only.d) the seats should be made of high quality plastic with colour scheme in yellow or orange.e) the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1730*450*1450mm2 colour- customizable multi colour and complete powder coat3 size of main tube-114*3.75mm steel pipe4 size of supporting tube-76*3mm steel pipe5 there is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck.6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater7 anti-skid components are used at the pedal parts.8 the distance between two spinners is no less than 230mm, avoiding the damage of being stuck9 anti theft cover is made by stainless steel/high quality plastic.10 thickness of bearing bracket is no less than8mm11 hazardous materials like coating agent, rubber are under national newest standard.functions: develops the strength of lower limbs, and improves the stability and agility of three main joints of lower limbs; good for the healing of inconvenience of bending and stretching of lower limbs, and muscular atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone, etc. approaches: sit on the chair and step on the footboard. stretching legs with force and recover slowly. repeat. users: suitable for people of different ages.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of parallel bars size/dimensionslength- 900 millimeterheight 800 millimetermaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength and durability. the ver

corporations/Associations/Others

CTN :45236853

25 May, 2026 2.65 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in leisure valley, sector 10 a, ward no. 2, chandigarh under mplads. ln/mp18047/2024-2025/116. - providing and fixing of chest press double complete in all respects having following specifications. size / dimensions length -1200 milimeter width- 700 milimeterheight 1800 milimeter maximum weight -120 kilogram material:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions.colour:- green paint finish- power coated, uv resistantpaint coating thickness (min) 100 micrometer warranty - 3 years.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of parallel bars complete in all respects having following specifications.size/dimensions length- 900 millimeter height 800 millimeter material:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength and durability. the vertical or standing pipes shall be 40 mm nb with a thickness of 2.9 mm, and the horizontal pipes shall also be 40 mm nb with a thickness of 2.9 mm. the foundation pipe shall consist of a gi pipe anchored 500 mm deep and supported with a mild steel (ms) angle of 25 25 4 mm. the nominal bore of the foundation pipe shall be 40 mm nb with a thickness of 2.9 mm. the ms foundation plate shall have a minimum thickness of 12 mm. all nuts and bolts used for assembly shall be made of stainless steel to provide durability and resistance to corrosion. the open ends of all pipes, bearing bushes, and bases shall be fitted with fibre-reinforced plastic (frp) caps having a minimum thickness of 2 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance under outdoor conditions.colour:- paint finish- power coated, uv resistant paint coating thickness (min) 80 micrometer warranty - 3 years. complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of three wheel shoulder builder/ arm wheel- outdoor gym equipment complete in all respects having following specifications. size / dimensions height of central pole from ground -1524 millimeter outside diameter of first wheel - 850 millimeter outside diameter of second wheel - 800 millimeter outside diameter of third wheel - 650 millimeter height of first wheel from ground - 1220 millimeter height of second wheel from ground - 1200 millimeter height of third wheel from ground - 1180 millimeter maximum weight -120 kilogram material:- all the pipes shall be galvanized iron (gi) and isi marked to ensure quality

corporations/Associations/Others

CTN :45222724

25 May, 2026 NA

Delhi - Delhi

Tender For auction sale of 01 no. sequential testing smoke + heat test device etc,24 nos. commercial vehicle parts : brackets,promotional items containing sticky notepads with ball pens, etc,promotional items containing ball pens , etc,05 sets of wooden sheets (approx - 05-sheets each),05 rolls of fibre glass sheets + 20 nos. rolls of threads,promotional items containing 15 nos., etc,01 roll of fabric length,assorted automotive parts , etc,12 packets of spare parts containing cables , etc,06 nos. oil seals of assorted type + 01 no, etc,15 rolls of plastic film (20 ft : wide 100 ft: long),promotional items containing notebooks, etc,printed matter : labels & pamphlets,01 no. hose return modulator , etc,04 sets of infant dresses + 43 nos. , etc,02 nos. plunge dressing rolls,03 boxes of metallic bracket with bolts & clamps,07 nos. strainer + 07 nos. ion exchange resin cartridge, etc,01 set of 4 disc brake pads, make: quietech,02 nos. fabric lengths,40 nos. plastic components,plastic connectors (2p 4mm socket assy), .; p/n: 100284-1. (approx. 200 nos.),01 set of gents kurta, pyjama & coat,06 nos. shocker assembly make: delphi,01 no. motor assembly,38 nos. pkts of metallic pins,17 packets of knee pillow (approx - 10 pieces each),01 set of men's sherwani kurta & trouser,printed matter : study material,horse rope halter (approx -80 nos.),men's waist belts without buckles (approx - 504 nos.),t-shirts (approx - 194 nos.),04 rolls of aluminium foil,01 no. water shut off valve"lgg" (as labelled),19 packets of automotive parts containing , etc,03 nos. industrial cameras, etc,01 no. guard patrol tour reader with acccessories,09 nos. knee orthosis,15 packets of sticky buttons,09 nos. handmade bedsheets,ladies dresses of assorted ''varieties'' (approx - 75 nos.),double bedsheets (approx - 25 nos.),16 packets of handkerchiefs (06-pieces each) + 07 nos. handmade bedsheets,10 packets of handkerchiefs (06-pieces each) + 06 nos. handmade bedsheets,double bedsheets (approx - 28 nos.),08 nos. handmade bedsheets,handkerchiefs (approx - 170 nos.) , etc,03 nos. actuator motor "hella" (as labelled),assorted cloth hangers (approx - 138 nos.) , etc

corporations/Associations/Others

CTN :45172722

21 May, 2026 NA

Surat - Gujarat

Tender For supplying of coconut peat for production of saplings in different suman nursery & model nursery of smc.

Coco Peat Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors