Web Analytics Made Easy - StatCounter

Coil Spring Tenders

Get complete information related to latest Coil Spring Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Coil Spring Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Coil Spring Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

CTN :40521560 Due date: 19 Jun, 202519 Jun, 2025 NA
Tender For supply of mt spares - hub oil seal for mg , bulb side indicator 24v 21w , bulb side indicator 24v 5w , adaptor for lifting pump als , steering seal for safari , combination switch for tata 2.5 ton , pressure plate om for als , relay 24 v for tata 2.5 ton , glow plug timer for sumo , clutch kit for tata 2.5 ton , eng mounting pad for mg , clock spring for safari , tci unit for re , regulator for re

CTN :40539176 Due date: 18 Jul, 202518 Jul, 2025 NA
Tender For supply of set of helical springs for primary suspension of wag7 locos comprising of - (1) outer coil spring to%a0rdso's drg. no.- sk.vl-039 (alt.-6 or latest) = 1 no. (2) inner co il spring to rdso's drg. no.- sk.vl-037 (alt.-6 or latest) = 1 no. and rdso's spec. no.-mp.0.4 900-12 (rev.-05) of january 2020 or latest. [ warranty period: 60 months after the date of delive ry ]

CTN :40538940 Due date: 12 Jun, 202512 Jun, 2025 NA
Tender For supply of fittings for level crossing wider base sleepers for 60 kg rail as per rdso drg. no. rt-8969 including plate screw rdso t-3913 (4 nos), dowels rdso drg. no. t-3002 (4 nos), 10mm thick g rsp of rdso drg. no. t-8747 (2 nos), gfn liner for 60 kg rail rdso drg. no. t-8751 (4 nos), metal liner for 60 kg rail rdso drg. no. t-8748 (4 nos), gfn liner for 52 kg rail rdso drg. no. t-8752/8753 (2 set), metal liner for 52 kg rail rdso drg. no. t-8749/8750 (2 set), erc mk-v rdso t-5919 (04 nos), ci bracket for 60 kg rail as per rdso drg. no. t-8985 (02 nos), ci bracket for 52 kg rail as per rdso drg. no. t-8986 (02 no s), ci distance bracket as per rdso drg. no. t-4785 (02 nos), single coil spring washer drg. no. t-10773 (0 4 nos), 22mm dia bolt for 60 kg rail as per rdso drg. no. t-11550 (02 nos) and 22mm dia bolt for 52 kg r ail as per rdso drg. no. t-11551 (02 nos) 10mm thick grsp of rdso drg. no. t-8747 (2 nos) and all other ancillary fittings required as per latest alterations if any till date of tender. [ warranty period: 30 months after the date of delivery ]

CTN :40503233 Due date: 13 Jun, 202513 Jun, 2025 NA
Tender For supply of mill and power turbine spares - 14a sh. no.020 o/p 2500 kw, rotor shaft fitted with moving blades, 1st stage nozzles with locking pieces, 2nd stage and 3rd stage diaphrogm, main shaft thrust coller, hp side laby segments, lp side laby segments, steam laby spring, oil seal holder hp & lp side, oil seal laby spring, rotor front and main bearing (76 mm journal), rotor rear and main bearing (76 mm journal), horizontal faceing stud, ht nut (horizontal face), oil seal bearing (68 mm journal), oil intel fitting, front end thurst bearing, active thurst pad, non active thurst pad holder, active thurst pad holder, non active thurst pad holder, oil seal laby segment hp& lp, oil intel fittings, front end bearing bkt horizontal stud, ht nut 1/2 " bsf, ht nut 3/8" bsf, governor drive shaft, governor drive wheel, governor wt, governor wt carrier, governor wt, governor race carrier, ball bearing b7205, fulcrum pin with washar & split pin, needle bearing 1816, ball bearing -u109/ 629zz, spindle for race carrier, rocker aram, half coupling main pump & governor, main oil pump- 55 gpm, auxillary oil pump- 45 gpm, spring for governor, handle for speed control, rachet for governor, spring for rachet, top spindle for speed control, throttle valve filted with spindle -86/(88mm), throttle valve seat, throttle valve spring, adjustable stud for throttle valve spring, ht nut 1/2 unc, emergency steam stop valve with spindle, half coupling for emergency valve, top spindle, relay piston, relay pilot valve spindle, allen screw, high speed gear pinion shaft, thurst bearing for pinion, plain bearing for pinion, thurst bearing for gear, plain bearing for gear, oil seal holder output shaft, driving end alternator bearing, driver end alternator bearing, alternator shaft pole balancing, driver side active pad, driver side non active pad, high speed coupling, governor terminal (shaft), low speed filxible gear type coupling, spare list for -24z52 mill turbines model-24z52 o/p- 550 hp, ht nut 3/4" bsf, gasket, gasket, lower cage, trip valve cage assembly, pin dowel, valve, pilot trip, screw soc hd cap, lock washer, pin roll, bonnet , trip valve, washer, thrust, shaft trip lever, lever reset, pin cotter, pin reset lever, screw shounder, screw, lever trip, trip valve and case assamble, gasket (116x110x6mm), gasket (127x106x4mm), gasket (104x83x3mm), allen screw (7/8"x1.1/2" bsw, ht stud 3/4"x4", ht stud 3/4"x4", allen screw (3/4"x90mm bsf, mill turbine model - 24zs2, main bearing rotor front end, main bearing rotor rear end, throttle valve seat 2.1/2", throttle valve 2.1/2", throttle valve 2", governor valve steam spindle 5/16", l- gland assembly 5/16", lock nut for l gland, main oil pump 25 gpm, metaflex coupling (high speed), oil filtev element 8gp, stem spindle for throttle valve, crushing spring, z- key valve 0-5 kg/ (small), retaining ring ( horse shoe), main oil pump-25 gpm, governor drive shaft, governor drive wheel (clock wire) no of teeth (27 no), tappet reset spring, stud 3/4"x3" bsf, stud 3/4"x3.1/2" bsf, ht nut 3/4" bsf, stud ht bsf 3/4"x92mm, tappet, tappet with nut, oil reflector (shaft main), thrust bearing 3308 c3, fib - turbine model- 500 mm o/p- 1000 hp, spare list, rotor front end main bearing, rotor rear end main bearing, thrust pad holder active side, thust pad holder non active side, active thrust pad, non active thrust pad, oil seal bearing, front end bearing, 1st stage nozzle (clockwise) with spare and locking pcs, oil intel fitting 19mm, steam laby holder hp side, steam laby holder lp side, steam laby segment hp &cp, laby steam segment spring, oil laby segment spring, throttle valve seat, throttle valve fitted with spindle, pilot valve for relay cylinder, piston for relay, spring for relay, governor spindle, governor drive wheel, governor wt carrier, governor wt, governor wt carrier, race carrier, rocker aram, rocker aram spindle, needle bearing - 1816z, ball bearing 7205, fulcrum pin with split pin and washer, bal

CTN :40510555 Due date: 20 Jun, 202520 Jun, 2025 NA
Tender For supply of details of crossing bolts and nuts (1 in 12) off sizes with single coil spring washer and m.s.ta pered washer as per details attached at annexure "a" [ warranty period: 30 months after the date of deli very ]

Central Government/Public Sector

CTN :40529866 Due date: 05 Jun, 202505 Jun, 2025 NA
Tender For supply of finish coat paint for helical coil springs of lhb coaches as per rdso specification no.-m &c/ pcn/132/2021 along with 15% suitable compatible thinner. [ warranty period: 30 months after the date o f delivery ]

Central Government/Public Sector

CTN :40510696 Due date: 15 Jul, 202515 Jul, 2025 NA
Tender For supply of inner coil spring for casnub bogie to rdso drg. no. wd-92058-s-5 alt.-13, item no.-2.matl. & spec. as per rdso str wd-01-hls-94 rev.-5.( colour code of spring must be green ) [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ]

Central Government / Public Sector

CTN :40530436 Due date: 19 Jun, 202519 Jun, 2025 NA
Tender For supply of natural rubber sheet roll dimension( sizes): 6 mm x 1200 mm x width x 10 meter length roll weight approx. 80 kgs. , suita ble for coil spring shot blasting machine ,and 4 wheel y track machine , detail description and technical specification given in annexure [ w arranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40500150 Due date: 09 Jun, 202509 Jun, 2025 NA
Tender For supply of joggled fish plates for 60 kg rails conforming to rdso drg no. t-5849, oggled fish plates comprises of (i) joggled fish plates with 4 holes to rdso drg. no. t-5849 -2 nos., (ii) bolts and nuts to dr g. no. t-11513 - 4 nos., (iii) single coil spring washer to rdso drg. no. t-10773-4 nos. and (iv) special washer (50x50mm) and 10 mm thick with 27 mm dia hole as per drawing - 8 nos. specification: fish pla tes should conform to irs:t-1-2012 [ warranty period: 30 months after the date of delivery ]

CTN :40483866 Due date: 05 Jun, 202505 Jun, 2025 10.0 Thousand
Tender For tender notice for purchase of mill house crane brake hoist coil spring
 Loading, Please wait...

Connect us via What's Up