Latest coin scrap Tenders | Government coin scrap Tenders

corporations/Associations/Others

CTN :44904179

21 Apr, 2026 NA

Chennai - Tamil Nadu

Tender For auction sale of steel turning & boring scrap (rusty & solidified) with mud,steel turning boring scrap,timber fire wood scrap grade ii,rubber scrap with end metal fitting,crankshaft con rod/caps special steel alloy scrap,cylinder liners/pipes lines scrap,cast iron scrap,aluminium alloy scrap,battery 12volts scarp,utd-20 starter scrap,utd-20 generator scrap,copper bus bar scrap,brass casting scrap

corporations/Associations/Others

CTN :44909118

20 Apr, 2026 NA

Ahmedabad - Gujarat

Tender For auction sale of scrap spring steel flate ( above 1 feet ),scrap auto parts,scrap wheel disc (all size for heavy bus),scrap engg. cylinder head,scrap fuel tank ( small ),scrap fuel tank ( big ),scrap bearing assorted,scrap air tank ( small ),scrap air tank ( big ),scrap radiator assy.having alluminium core without top & bottom,scrap allu. auto parts,scrap acrylic sheet cutting,scrap inter cooler,scrap turbo charger leyland,scrap turbo charger eicher,scrap tubeless mini tyre 225/235*75 r,scrap tubeless tyre 295/80 r

Central Government And Public Sector

CTN :44882223

23 Apr, 2026 NA

Raipur - Chhattisgarh

Tender For auction sale of rolling stock - mild steel scrap cut up parts of cond. wagons to be sold without bogie and excluded fittings as per crse/ bsp letter no. mech. /hq/ 003/007 /4016 dt. 12.11.2018 [excluded fittings-coupler body, knuckle, knuckle pin, draft gear, yoke ,bogie end pull rod, brake cylinder complete with piston rod and suspension bracket, yoke pin,ctrb, wheel sets and roller bearing, bogies, icf trolley bvzi, distributor valve.] & front follower of draft gear vide pcme/bsp's letter mech/hq/010/010/warranty dtd. 09.06.2020. remark: 1. wagons may be grounded for clearing of track. 2.wagon component must be cutup before lifting by the purchaser, so that component can not be re-used. 3. weight is as per the challan provided by the stock holder and it is for reference only. 4.in bvzc wagon lb springs to be cut marked before delivery to ensure non-recycling of material. 5. to be sold on "as is where is basis" 6. cbc components to be handed over sepretarely in placemeal.

CTN :44882125

22 Apr, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned boxnr, bobrmn1, boxnm1 & bcnm1 wagons no as following: [1] ser 25079617706 boxnr [2] er 72029660404 bobrnm1 [3] ser 10079666960 boxnm1 [4] nr 30038961066 bcnm1 [5] cr 30019060320 bcnm1 [6] er 30029020147 bcnm1 [7] cr 30019160457 bcnm1 [8] ser 30079160251 bcnm1 [9] er 30029125682 bcnm1 [10] ser 10079646511 boxnm1 [11] ser 10079662764 boxnm1. condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at the time of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (132.180 mt) is the lot quantity (132.180 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchasermay, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowedinside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittings as follows:- (i) for boxnr, boxnm1 & bcnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.(ii) for bobrnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, dom cylinder, square shaft with bush, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, lsd, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.

CTN :44882127

22 Apr, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned bvzc wagons no as following: [1] ser 85079704165 bvzc [2] special repair 85060260403 bvzc [3] ecr 85100360094 bvzc [4] nfr 85050100603 bvzc [5] nfr 85050160195 bvzc [6] ser 85079660058 bvzc [7] cr 85019460366 bvzc [8] ecr 85100429722 bvzc condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at the time of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (75.540 mt) is the lot quantity (75.540 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge .[3].if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4].if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5].no dispute regarding variation in weight shall be entertained after e-auction sale.[6].before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighatarea beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittings as follows:- for bvzc : wheel set with rb andaxle box, brake cylinder, distributer valve, draft gear, coupler body, yoke & yoke pin as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024

CTN :44882287

21 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.ws/ayma/04/04/26-27/bg/cond./4w/8w/wgn. description- iron and steel scrap cutup parts of bg cond.4w/8w/wgn. without contents if any. 1) se 75079316598 bobsnm1 (nlb) 2) special repair 30069060806 bcnm1 (nlb) 3) er 72029562463 bobrnm1 (nlb) 4) er 72029564177 bobrnm1 (nlb) 5) nr 85039647471 bvzc 6) se 85079704141 bvzc 7) cr 85019660094 bvzc nb: (1): i) wagons are to be sold without 08 nos. nlb trolleys against special repairl. no. 01 to 04. ii) wagon serial no. 01 to 04 to be sold without 16 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower etc and other excluded fitting as per latest excluded fitting list. * iii) wagon serial no. 05 to 07 to be sold without 06 nos. r/b wheel sets, axle box cover plate, bg spring and brake gear with lever pull rod etc . as per latest fitting list. **( it contains no trolley ) *excluded fittings list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) delivery will be given in numbers.

Central Government/Public Sector

CTN :44892518

21 Apr, 2026 NA

Jaisalmer - Rajasthan

Tender For auction sale of rolling stock - cut up iron and steel scrap of condemned bg coaches, 05=10 units. laying at jaisalmer station.to be deliver after cutting as iron scrap. details of coach number as under: (1) 035708 nfr slrd (2) 145209 nfr wgscn.(3) 084622 nwr wgscn (4) 075233 nfr wgscn (5)075230 nfr wgscnconditions: [a] following excluded components will be taken back from the purchaser in good and sound condition after cutting and before delivery as per gm-mechanical-hq/ office letter no.100/ 4/ excluded component dated 25.7.08 [1] buffer plunger-20 nos [2] buffer casing -20 nos [3] buffer parting plates rubber pad-80 nos [4] draw hook-10 nos [5] coupling screw assembly-10 nos [6] draft link with nut-20 nos.[7] draft key-10 nos [8] centre pivot- 10 nos [9] distributor valve- 05 nos [10] auxiliary reservoir- 05 nos [11] bogie mounted brake cylinder-20 nos.[12] bogie complete with wheel set assebmby with all fitting -10 nos ( bogies are in dismantled condition and placed near coaches).[13] wearing piece bronze-20 nos. a] all other attached non-ferrous will be delivered to the purchaser [b] all rubbish/dump items released from sold condemn coaches to be removed by the purchaser from track / station/ cutting yard. [c] cutting allowed [d] loading by purchaser (e) all excluded items of particular sold coaches will have to directly handed over to sse/progress at jodhpur workshop by purchaser before collecting of auctioned scrap material/items of that coach from cutting site (f) e-way bill for transportation of excluded items released from condemned coaches, will be generated by jodhpur workshop and further it will be provided to purchaser for transportation. (g) un-loading of excluded items released from condemned coaches will be done by the railway at jodhpur workshop

Central Government/Public Sector

CTN :44894378

22 Apr, 2026 NA

Multi City - Gujarat

Tender For auction sale of depot ferrous scrap - 98050114 scrap release all types of railway ferrous and miscellaneous, material consisting of s&t, p way, works and ohe items c & w items- such as ms, gi, ci containing signalling units, rods, junction boxes, panels, ms gi structures, ladders, mast, rtu, cb, etc. and all other types of signaling items, gear case, the ground connection, ohe fitting, ms chains, heavy structure almirah/racks, rods angle, top housing, road bar, glude joint, ground connection channel, pipes, lc material, ladders, jali, rubber items ,spring plank, pantograph with or without pneumatic motor, gate, door, brake cylinder, tie bar, fencing, trolley, ms machines etc., tmt bars rods, pulley, rib cage, point machines without motors, wagon body cut piece bogies side frame, machines, sleeper, ms sheet, various types sleeper part, tie bar, fencing bars, i-beam, damaged empty drums, light fittings, rail & rail pieces, ms wires, junk light weight/corroded material consist of toughened sheets, m.s./gi sheets, grease seal, drum, wire, parts of rolling shutter, light weight cuttings, various damaged and rusty drums filled with coalter, dry paint, mud and dray fo if any of sort and sizes, g.i. buckets, plastic, steel buckets baskets, signal lamps, duct, vent pcs., fencing and pipes, wire mesh, stretcher, bicycle, pan, frames, electrical fittings, t.l. fittings, grill- jali, cabinet frames, rack ballast, rusted body and parts of weighing machine, electronic/electrical material, small rods angle, battery boxes, tool boxes, shovel, rail door handles, main door, foot plate, step plates, bench pipes, typewriter g.i. pipes, trolleys, water tank bond, location box with or without their component and wiring fittings, trolly, different type of ohe bonds of rail and other various ms fabricated structures, break load rings, pins, screw, bolts, spikes, keys, loco parts, stay rods, sleeve for centre pivot, pantograph parts, palm pull rods, lever, axle box housings, air motor, springs of pantograph, connecting rods, and other rods, rear cover of axle box housing, longer hanger, spare parts of spt machine, pipe fittings, end shield covers, break beam hangers, brake shoe, vertical lever, suspension levers, compressor spares, tension rods bushes, dash pots, ms& wi turning borings cut, collars, vehicle spares, ci items consisting of rusty and dusty drainage pipe, valve, meter, brake block, pulley, motors body, pipes, plates, d.v, vacuum cylinder chamber, pig irons pieces, signaling box ohe fittings, steel furniture consisting of chairs, tables, g.i. separation sheet, chair , stretcher, beds, ms rack, almira, other types of steel furniture of sorts and sizes, broken, damaged with or without wood, cushions, plastic, mica, foam seat attachment, parts brake liner, thrust bearing, spring, yoke, insulation block hangers, slides, locking rods, parts of point machine, a b cover, break head, cylinder head, pcs. of break beam, protective tubes, and other p-way fittings, coupler, knuckles, cp top/bottom, pu pad, narrow/wide jaw adapter, released bulk head components, wagon doors, cutting plate, and assorted cut pieces thereof, fabricated from irsm 44, etc. brake cylinder, cs & ci if any. valve, broken pcs. of bearings, inner and outer race of bearings, spares of break valve, trolley wheels, clamps, bmbc parts, pump shafts, impellers, tension device parts, fan armatures, chain sling, rev. center, hooks, spares of trucks, accessories of transformer, fish plates, hooks, silent blocks, cut pieces of plates, doors, angles, etc., fasteners such as bolts, nuts, and other related misc, etc., with or without, rail, of sorts and sizes with or without parts fittings and minor non-ferrous attachments, unserviceable. if any non-ferrous material is found will not be delivered and retained by the custodian. minor/negligible nf attachment may be allowed. wooden and railway track shall be excluded from the lot if found any.digging will be permitted only

Central Government/Public Sector

CTN :44892473

28 Apr, 2026 NA

Multi City - Uttar Pradesh

Tender For corrigendum : auction sale of others - disposal of ferrous scrap released materials (cast steel) such as : (1) draft, qty=19 nos.=2565 kg. (2) cbc coupler body, qty=06 nos.=990 kg. (3) bk cylinder 14", qty=23 nos.=1564 kg. (4) bk cylinder 12", qty=18 nos.=990 kg. (5) bk cylinder bmbs, qty=01 no.=60 kg. (6) top casting m-ii broken part, qty=27 nos.=390 kg. (7) distributor valve, qty=53 nos.=1855 kg. (8) top casting hl broken part, qty=03 nos.=140 kg. (9) bottom casting, qty=08 nos.=260 kg. (10) adopter, qty=06 nos.=75 kg. (11) yoke, qty=01 no.=101 kg. (12) cbc lock, qty=10 nos.=60 kg. (13) angle cock broken, qty=70 kg. (14) apm, qty=05 nos.=30 kg. having local lot no. 10/obr/25. location:-scrap yard c&w/obr.

Central Government/Public Sector

CTN :44892477

28 Apr, 2026 NA

Multi City - Jharkhand

Tender For corrigendum : auction sale of others - disposal of ferrous scrap released materials(cast steel) such as: (1) knuckle, qty=18 nos.=648 kg, (2) draft, qty=30 nos.=4392 kg, (3) yoke, qty=03 nos.=213 kg, (4) coupler body, qty=20 nos.=3240 kg, (5) brake beam, qty=05 nos.=360 kg, (6) brake cylinder 355 mm, qty=33 nos.=2244 kg. (7) brake cylinder 300 mm, qty=02 nos.=118 kg. (8) distributor valve, qty=63 nos.=2223 kg. (9) angle cock, qty=106 nos.=393 kg. (10) cbc lock, qty=29 nos.=185 kg. (11) adapter, qty=27 nos.=324 kg. (12) dirt collector, qty=06 nos.=35 kg. (13) top casting, qty=02 nos.=87 kg. (14) cut off pieces of materials, qty=9735 kg. having local lot no. 15/ptru/25. location:- inside the scrap shed.

Coin Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector