Latest coir sheet Tenders | Government coir sheet Tenders

State Government

CTN :45651300

01 Jul, 2026 1.68 Lacs

Panchkula - Haryana

Tender For providing and fixing of contractor block and other electric components at various t wells in sector 5 panchkula - 24.5.1.6:- miscellaneous items 1.6. supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 16 sqmm [through rate], 20.114.9:- supplying erection, testing of fully automatic electric control panel board for t/wells in pump chamber consisting of ms sheet of thickness 14 gauge duly painted box type floor mounted made of angle frame containing 1 no. fully automatic air brake starter suitable for motor of the following capacity, min switch of suitable range with hrc fuse, 1 no. volt meter (0 to 500 volts), 1 no. amp. meter of 0 to 100 amp. 3 sets of indicating lamp capacitor of suitable capacity and 1 no. single phase preventers with the timer switch including wiring in panel board and suitable electric energy meter wiring in electric control panel board complete in all respect as per specification given in schedule no. ii, including mcb, suitable, capacitor, wooden box etc as per site requirement complete in all respect. 9. 50 hp motor [through rate], 20.10.3 :- extra for fixing sluice valves/flap valves socketed or flanged including cartage from stores or nearest railway station to site of works 3. 150 mm i/d [through rate], 20.11.3 :- providing and fixing cast iron double flanged swing check type reflux (non return) valves pn-1.6 marked with is:5312 including nuts and bolts marked with is:1363, rubber sheet marked with is:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. complete in all respect to the satisfaction of engineer-incharge 3. 150 mm i/d [through rate], 20.84:- providing and fixing of insulated rubber matting suitable for 11 kv installation 1 m x 2 m x 12 mm thick (is code 15652-40091) as per specification complete and as per directions of engineer-in-charge [through rate], ns item:- providing and fixing of contractor block mnx 80 landt make as per satisfaction of engineer-in-charge and attesting on load, ns item:- hiring of electronic borewell camera for videography 350 deep borewell urgently required for internal photography complete in all respect to the entiresatisfaction of engineer-in-charge, ns item:- measurement of discharge at tubewell of 1 hr after opening of upper bend with help of discharge flow meter including dismantling and reassembling of tee bend with help of chain block labour tool and plantcomplete in all respect (note any damage to site and material is responsibilityof the contractor)

State Government

CTN :45657055

14 Jul, 2026 NA

Kishtwar - Jammu And Kashmir

Tender For supply of 30 kva kirloskar jackson fan belt set , 30 kva kirloskar jackson fuel filter sec primary , 30 kva kirloskar jackson oil filter , 30 kva kirloskar jackson metal diode 3 plus ve plus 3 minus ve , 30 kva kirloskar jackson avr , 30 kva kirloskar jackson push rode o ring set rubber , 30 kva kirloskar jackson self starter solonite , 30 kva kirloskar jackson horse pipe set , 30 kva kirloskar jackson fuel pipe tank to pump pump to filter filter to injector , 30 kva kirloskar jackson over flow pipe banjo copper washer , 30 kva kirloskar jackson blower fan , 25 kva eicher diode metal 25 amp 3 plus ve plus 3 minus ve , 25 kva eicher fan belt , 25 kva eicher oil filter , 25 kva eicher fuel filter , 25 kva eicher self-starter solonite , 25 kva eicher air filter , 15 kva kirloskar lop sensor , 15 kva kirloskar oil filter , 15 kva kirloskar fuel filter , 15 kva kirloskar fan belt set , 15 kva kirloskar metal diode 3 plus ve plus 3 minus ve , 10 kva eicher fan belt , 10 kva eicher oil filter , 10 kva eicher fuel filter , 10 kva eicher gasket part , 10 kva eicher excitation mab , 10 kva eicher multi meter metravi * /bid number : gem/2026/b/7699841 + /dated: 23-06-2026 ' ' / bid document 1 / 25

corporations/Associations/Others

CTN :45653556

30 Jun, 2026 NA

Ahmedabad - Gujarat

Tender For auction sale of scrap rubber goods ( hose pipes, brake hose, etc.),scrap l.t.wire,scrap seat cussion with rexine,scrap engine cylinder liners,scrap fuel / broken pipes,scrap con.rod bearing & main bearing,scrap glasses all type,scrap wooden cases/planks/strips/pices etc/,scrap fuel filter element,scrap rexine pcs.,scrap cash box steel,scrap woode table for officers,scrap plastic pices.,scrap rubber envelop,scrap bs-vi air filter primary,scrap bs-vi air filter secondary,scrap luxary passanger fan,scrap packing papers/waste paper etc,scrap m.s.savings,waste paper office waste and stationary etc,scrap pedalstand fan,scrap auto electricals parts,scrap starter assy. (auto ),scrap tube light fixer,scrap hydrolic troly jack 5 ton,scrap filter

corporations/Associations/Others

CTN :45653558

30 Jun, 2026 NA

Ahmedabad - Gujarat

Tender For auction sale of scrap rubber goods ( hose pipes, brake hose, etc.),scrap seat cussion with rexine,scrap m.s.savings,scrap engine cylinder liners,scrap wooden cases/planks/strips/pices etc/,scrap woode table for officers,scrap electrical goods assorted,scrap starter assy. (auto ),scrap altonator assy.,scrap hydrolic troly jack 5 ton,scrap mechanic jack,scrap rubber envelop,scrap cng ht cable,scrap audio instruments,bs-ii and bs-iii air filter primary,scrap stabelizer

corporations/Associations/Others

CTN :45653560

30 Jun, 2026 NA

Ahmedabad - Gujarat

Tender For auction sale of scrap rubber goods ( hose pipes, brake hose, etc.),scrap seat cussion with rexine,scrap m.s.savings,scrap card board cartoon,scrap cash box steel,scrap plastic pices.,scrap centry fugal motor pump without etc. motor,scrap rubber envelop,scrap audio instruments,bs-ii and bs-iii air filter primary,bs-ii and bs-iii air filter secondary,scrap bs-vi air filter primary,scrap bs-vi air filter secondary,scrap l.t.wire,scrap fuel / broken pipes,scrap steel side racks,scrap auto electricals parts,scrap electrical goods assorted,scrap sectional tyres repair mold,scrap starter assy. (auto ),scrap altonator assy.,scrap hydrolic troly jack 5 ton,scrap bottol jack,scrap mechanic jack

State Government

CTN :45646140

07 Jul, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates for non-schedule items for preparing estimates. - supplying , installation, testing and commissioning of vertical turbine pump set with ss impeller capable to discharge 126 m3/hr.against total head of 50 m, (make kirloskar/jyoti/wilo-mather&platt/wpil) coupled with suitable capacity vertical hollow shaft/solid shaft squirrel cage induction motor , rating of motor 20% more bhp than that of pump (make kirloskar /abb /cgl/ siemens) operated on 415 +/- 10% volt, 3 phase , 50 c/s a.c supply , ie3 type as per is:325 and iec:63400-ihaving speed 1450 rpm,with heavy duty m.s. column assembly with ss line shaft and each coloumn of 5 feet length including cost of supplying , fitting and fixing of all required accessories such as cidf sluice valve-1 set, cidf nr valve-1 set, pressure gauge-1 no, strainer-1 no, m.s. channel base plate etc. all complete including cost of taken out existing old pumpset., supplying and installation of fasd starter suitable for above mentioned vt pumpset make lk/bch/schneider., supplying and laying of 25 mm2 , 1.1 kv, 3 core pvc insulated unarmoured copper cable make polycab/kei/gloster, from starter to motor., supplying, installation testing and commissioning of horizontal split casing centrifugal pump set with bronze impeller having discharge 126 m3/hr. against total head of 35 m, (make - kirloskar/jyoti/wilo-mather&platt/wpil), coupled with suitable capacity squirrel cage induction motor, rating of motor 20% more bhp than that of pump(make kirloskar /abb /cgl/ siemens) ,tefc, ie3 type as per is:325 and iec:63400-ihaving speed 1450 rpm,operated on 415 +/- 10% volt, 3 phase , 50 c/s a.c supply, mounted on a commonm.s. base plate including cost of supplying , fitting and fixing of all required accessories such as cidf sluice valve-1 set, cidf nr valve-1 set, pressure gauge-1 no, foot valve-1no, etc. all complete including cost of taken out existing old pumpset., supplying and installation of fasd starter suitable for above mentioned c/f pumpset make lk/bch/schneider., supplying and laying of 16 mm2 , 1.1 kv, 3 core pvc insulated unarmoured copper cable make polycab/kei/gloster, from starter to motor., cost towards complete repairing of control panel at intake well with changing of damaged parts such as :-1.150 amp tpn mccb,50 ka -1 no. as incoming feeder.2. 75 amp tp mccb, 50 ka-2no as outgoing feeder.3.star delta timer-2nos(one for each starter) 4. 32 amp switch fuse unit -01 no. for internal and external light load.5. (0-500 v) volt meter-01 no., ampere meter-01 no.,three phase indicator lamp,powder coating paint,push button on/off,on/off/trip indicator lamp,wiring,etc as per required and testing on full load ., cost towards providing all labour, tools and technicians for taken out and dismantling 40 hp vt p/set with bowl assembly, 6" dia. coloumn pipe and line shaft etc all complete., cost towards dismantling and repairing of complete bowl assembly., cost towards making supplying and fitting s.s. top shaft as per size and sample., cost towards making supplying and fitting of c.i. spider bearing having od 6.5" with rubber bush as per size and sample., cost towards lowering of vt p/set. after complete repairing and assembling works., cost towards complete repairing of control panel at clear water pump house with changing of damaged parts such as :-1.125 amp tpn mccb,50 ka -1 no. as incoming feeder.2. 63 amp tp mccb, 50 ka-2no as outgoing feeder.3.star delta timer-2nos(one for each starter) 4. 32 amp switch fuse unit -01 no. for internal and external light load.5. (0-500 v) volt meter-01 no., ampere meter-01 no.,three phase indicator lamp,powder coating paint,push button on/off,on/off/trip indicator lamp,wiring,etc as per required and testing on full load .

CTN :45657420

04 Jul, 2026 NA

Porbandar - Gujarat

Tender For supply of spare parts for ambulance & 03 tonner - oil filter, fuel filter, air filter, differential oil, gear oil, universal joint, break pad, break liner, wheel hub grease, hub oil seal front, hub oil seal rear inner, hub oil seal rear outer, hub bearing outer lhs, axle packing rear, hub check nut and lock, beacon lamp (side), head light assembly lhs & rhs, engine mounting rubber pad, clutch master cylinder assembly, clutch slave cylinder assembly, gear shifting connecting links, hand brake cable, wheel balancing & alignment, seat cover work, under chassis rust removing and, denting removing, under chassis rubber coating, pressure plate (force), clutch plate (force), clutch release bearing (force), starter motor servicing

CTN :45666044

03 Jul, 2026 89.7 Thousand

Doda - Jammu And Kashmir

Tender For supply of fuel pump assy for mg , armature for tata 2 5 ton , self starter for 2 5 ton , engine mounting pad for mg , disc rotor for tata safari , head gasket for mg , temperature sending unit for mg , wheel bearing for marksman , brake sensor for marksman , oil seal for marksman , socket 2 pin for 2 5 ton , wheel bearing for tata safari , rear bearing for rakshak plus , front wheel brake pad for mg , window glass rubber beading for safari s11

CTN :45666079

03 Jul, 2026 20.0 Thousand

Delhi - Delhi

Tender For supply of disc brake assy , drive assy , assy gear shifting leaver knob , starter push button pec , armature , fixing bracket assy , brake hose 550 mm long , solenoid switch , rubber hose

CTN :45651566

21 Jul, 2026 NA

Indore - Madhya Pradesh

Tender For providing and supply rates for water supply related items for 2026-27 at nagar parishad depalpur distt indore - gi pipe (per meter), gi pipe 1" (per meter), gi pipe 2" (per meter), gi pipe 3" (per meter), gi pipe 4" (per meter), gi pipe 6" (per meter), gi pipe 8" (per meter), gi pipe 3/4" (per meter), hand pump chain (per piece), hand pump bearing 6204 (per piece), hand pump axle (per piece), gi elbow 1/2" (per piece), gi elbow 1" (per piece), gi elbow 1-1/4" (per piece), gi elbow 1-1/2" (per piece), gi elbow 2" (per piece), gi elbow 3" (per piece), gi elbow 4" (per piece), gi elbow 6" (per piece), gi elbow 8" (per piece), gi socket 1/2" (per piece), gi socket 1" (per piece), gi socket 1-1/4" (per piece), gi socket 1-1/2" (per piece), gi socket 2" (per piece), gi socket 3" (per piece), gi socket 4" (per piece), gi socket 6" (per piece), gi socket 8" (per piece), gi union 1/2" (per piece), gi union 1" (per piece), gi union 1-1/4" (per piece), gi... gi union 1½" (per piece), gi union 2" (per piece), gi union 3" (per piece), gi union 4" (per piece), gi union 6" (per piece), gi union 8" (per piece); gi tee ½" (per piece), gi tee 1" (per piece), gi tee 1¼" (per piece), gi tee 1½" (per piece), gi tee 2" (per piece), gi tee 3" (per piece), gi tee 4" (per piece), gi tee 6" (per piece), gi tee 8" (per piece); di joint 2" (per piece), di joint 3" (per piece), di joint 4" (per piece), di joint 6" (per piece), di joint 8" (per piece); rubber ring 2" (per kg), rubber ring 3" (per kg), rubber ring 4" (per kg), rubber ring 6" (per kg), rubber ring 8" (per kg); brass upper valve (isi) (per piece), brass lower valve (isi) (per piece); chain with coupler (per piece); ms pata clamp (per piece); connecting rod 12mm diameter (per piece); rod socket 12mm x 80mm with chain nut (per piece); nuts & bolts (all sizes) (per kg); gi plug 2" (per piece), gi plug 3" (per piece), gi plug 4" (per piece), gi plug 6" (per piece), gi plug 8" (per piece); rubber seat 4mm. sluice valve (2-inch, 3-inch, 4-inch, 6-inch, 8-inch) – per piece; non-return valve (2-inch, 3-inch, 4-inch) – per piece; 3-core submersible cable (isi: 2.5mm, 4mm, 5mm) – per meter; hand pump assembly (complete with water chamber, handle, axle, bearing, chain, etc.) – per piece; top head assembly (complete) – per piece; hand pump washer – per kg; tailpiece (80mm, 100mm, 150mm, 200mm) – per piece; tap/cock (1/2", 3/4", 1") – per piece; flange (2", 3", 4", 6", 8") – per piece; hand pump can – per piece; 50mm. 3/2" aluminum cable (isi) – per meter; pvc tank (500l, 1000l, 2000l) – per unit; main switch (63a, 100a, 200a, 400a, 3-phase) – per unit; submersible motor pump (5hp, 7.5hp, 10hp, 12.5hp; 10–20 stages) – per unit; ct plate – per unit; hand pump leather valve – per unit; hand pump cylinder (gunmetal valve, upper valve, lower valve complete) – per unit; hand pump handle – per unit; cylinder cap – per unit; hand pump nuts & bolts – per kg; air valve (8") – per unit; gi bend (2", 3", 4", 6") – per unit; gi... bend 8" (per piece); standard starter 5 hp (per piece); standard starter 10 hp (per piece); standard starter 15 hp (per piece); standard starter 20 hp (per piece); reducer 4"x3" (per piece); reducer 3"x2" (per piece); reducer 8"x4" (per piece); gunmetal gate valve 2" (per piece); gunmetal gate valve 3" (per piece); air valve 8" (per piece); 2 hp submersible single phase (per piece); reducer 2"x4" (per piece); g.i. tee 8" (per piece); g.i. tee 6" (per piece); g.i. tee 4" (per piece); g.i. tee 2" (per piece); g.i. nipple 2"x6" (per piece); g.i. nipple 2"x12" (per piece); g.i. nipple 2"x18" (per piece); g.i. nipple 2"x24" (per piece); g.i. nipple 3"x6" (per piece); g.i. nipple 3"x12" (per piece); g.i. nipple 3"x18" (per piece); g.i. nipple 3"x24" (per piece); g.i. nipple 4"x6" (per piece); g.i. nipple 4"x12" (per piece); g.i. nipple 4"x18" (per piece); g.i. nipple 4"x24" (per piece); pvc pipe 90mm (per piece); pvc pipe 110mm (per piece); pvc pipe 140mm (per piece); pvc pipe 160mm (per

Coir Sheet Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others

State Government